Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VENUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

The Magellan Venus Mapping Mission: Aerobraking Operations

The orbit of the Magellan spacecraft was circularized during a 70 day aerobraking phase, which ended on August 3, 1993. Shrinking the orbit apoapsis from 8467 km down to 541 km was required to obtain meaningful gravity science data at high and moderate latitudes. Aerobraking was the only way to reach this nearly-circular orbit, since the amount of propellant on board Magellan was at least an order of magnitude too small to circularize propulsively. This paper will describe the steps taken by the Magellan Flight Team to successfully aerobrake the Magellan spacecraft into the nearly-circular orbit. Magellan is currently in a 541 by 197 km altitude orbit around the planet Venus. This paper will briefly describe the Magellan mission history and hardware, the goals of the continuing Magellan mission, the exciting aerobraking phase, and other science objectives beyond the primary goal of producing a high-resolution global-gravity map of Venus.

Griffith, Douglas G.↗

Enabling repeat-pass interferometry from low Venus orbit

Repeat-pass interferometry is a powerful technique for determining changes in topography by flying a radar over the terrain two or more times. These overflights must be very close to each other in space. To design and maintain a low Venus orbit that enables this requires the consideration of drag, non-spherical gravity effects, and solar tides. Once the orbit is designed, the spacecraft must be navigated. To do so requires the use of radar-based terrain-relative navigation in addition to the traditional radiometric datatypes. The mission design and navigation to enable repeat-pass interferometry at Venus are described.

Hensley, Scott↗

Static Wind Tunnel Testing of a Legged Venus Lander

A static wind tunnel test was conducted to determine the static aerodynamic coe cients of the surface lander design proposed by the Venus In-Situ Atmospheric and Geochemical Explorer (VISAGE). The baseline design of the lander consists of a spherical pressure vessel with a top-mounted circular drag plate for aerodynamic deceleration, and three xed landing legs. A modular subscale lander model, which allowed testing of several drag plate and landing leg con gurations, was fabricated using rapid-prototyping techniques. The model was tested with four di erent drag plates and three di erent leg con gurations, at a dynamic pressure of 1610 Pa and Mach number of 0.15. Testing was conducted using legs of varying diameter in order to determine the appropriate scaling of the results to Reynolds numbers representative of terminal descent at Venus. The static aerodynamic force (axial, normal, and side), and moment (rolling, pitching, yawing) coe cients for each lander con guration were determined as a function of model orientation. All model con gurations were found to be statically stable in the range of total angles of attack considered (0 to 30 deg). However, the drag performance and degree of static stability of the model were dependent on the dihedral angle of the circular drag plate. The results will enable the creation of a preliminary aerodatabase for the VISAGE lander concept, and allow the e ect of design changes on aerodynamic performance to be evaluated.

Rabinovitch, Jason↗

Enabling repeat-pass interferomtetry from low Venus orbit

Repeat-pass interferometry is a powerful technique for determining changes in topography by flying a radar over the terrain two or more times. These overflights must be very close to each other in space. To design and maintain a low Venus orbit that enables this requires the consideration of drag, non-spherical gravity effects, and solar tides. Once the orbit is designed, the spacecraft must be navigated. To do so requires the use of radar-based terrain-relative navigation in addition to the traditional radiometric datatypes. The mission design and navigation to enable repeat-pass interferometry at Venus are described.

Hensley, Scott↗

SPECULATIONS ON ADAPTATIONS OF ANY LIFE ON VENUS, PAST TO EXTANT.

If life arose on Venus or was seeded in its ancient past when it presumably had liquid water on the surface until perhaps about a billion years ago[1-3], it has experienced considerable changes in environmental conditions. Little is known about the conditions on early Venus, but what has been inferred for Earth provides some speculative basis given their physical similarity, proximity to theSun and past volcanic activity. The key conditions include surface temperature, pressure, atmospheric composition, geochemical make-up, presence of liquid water, global circulation, and the rotation state(rate and axial tilt) which control the day-night cycle over the planet and its atmosphere. Full abstract in record details

S. S. Limaye↗

Flight Envelope Assessment of SmallSat Aerocapture Trajectories at Venus and Mars

Aerocapture is an increasingly studied orbit insertion concept for small satellite (SmallSat) missions beyond low Earth orbit (LEO). Compared to fully propulsive methods, aerocapture reduces the orbit-insertion propellant mass by approaching on a hyperbolic path and using the planetary atmosphere to reduce the vehicle’s velocity such that the final target orbit is achieved. This allows for an increase in payload mass delivered to orbit and a reduction in launch-to-orbit time. To analyze the feasibility at Venus and Mars, aerocapture flight envelope analysis is conducted by assessing the guidable trajectory space during atmospheric flight given entry conditions, vehicle properties, target parameters, and planet-dependent trajectory dispersions. The Program to Optimize Simulated Trajectories II (POST2) is used to simulate both ballistic and lifting aerocapture trajectories with SmallSat-compatible aeroshell designs. The entry flight path angle is optimized to achieve a final target orbit for lift up/down and max/min control configurations. When plotted, the resulting area between the steep and shallow trajectories forms a flight envelope with planet-dependent ±3σ atmospheric, aerodynamic, and delivery state dispersion profiles applied. The results presented in this paper show that SmallSat aerocapture is feasible for lifting aeroshell designs at Mars and Venus as well as ballistic vehicle designs at Mars.

Jack A. Joshi↗

The Big Plunge at Venus: The DAVINCI Descent Phase

DAVINCI (Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging) was selected as one of two new Discovery missions in summer of 2021 with the primary goals to study how the Venus atmosphere formed and changed over time. DAVINCI does this by making in situ measurements of the atmosphere, taking images below the cloud layer during the descent phase, and imaging the surface and clouds during two flyby science opportunities. The Descent Sphere is neither designed nor required to land on the surface so all critical science data must be taken and transmitted to a relay spacecraft prior to impact. This architecture drives the mission to a carefully-crafted concept of operations; deployments, instrument operations, and communications are choreographed to ensure the right data is gathered at the right altitude given the uncertainties in the trajectory and timeline. A complex flow of analyses and tests throughout development will validate the system’s ability to execute the mission goals. In the end DAVINCI will be ready for its one hour of descent time to meet its driving science goals.

DAVINCI↗

The Big Plunge at Venus: The DAVINCI Descent Phase

DAVINCI (Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging) was selected as one of two new Discovery missions in summer of 2021 with the primary goals are to study how the Venus atmosphere formed and changed over time. DAVINCI does this by making in situ measurements of the atmosphere and taking images below the cloud layer during the descent phase. The probe is neither designed nor required to land on the surface so all critical science data must be taken and transmitted to a relay spacecraft prior to impact. This architecture drives the mission to a carefully-crafted concept of operations; deployments, instrument operations, and communications are choreographed to ensure the right data is gathered at the right altitude given the uncertainties in the trajectory and timeline. A complex flow of analyses and tests throughout development will validate the system’s ability to execute the mission goals. In the end, DAVINCI will be ready for the one opportunity at one hour of descent time to meet its driving science goals.

DAVINCI↗

GJ 3929: High-precision Photometric and Doppler Characterization of an Exo-Venus and Its Hot, Mini-Neptune-mass Companion

We detail the follow-up and characterization of a transiting exo-Venus identified by TESS, GJ 3929b (TOI-2013b), and its nontransiting companion planet, GJ 3929c (TOI-2013c). GJ 3929b is an Earth-sized exoplanet in its star’s Venus zone ( P b = 2.616272 ± 0.000005 days; S b = 17.3 +0.8 -0.7 S ⊕ ) orbiting a nearby M dwarf. GJ 3929c is most likely a nontransiting sub-Neptune. Using the new, ultraprecise NEID spectrometer on the WIYN 3.5 m Telescope at Kitt Peak National Observatory, we are able to modify the mass constraints of planet b reported in previous works and consequently improve the significance of the mass measurement to almost 4σ confidence ( M b = 1.75 ± 0.45 M ⊕ ). We further adjust the orbital period of planet c from its alias at 14.30 ± 0.03 days to the likely true period of 15.04 ± 0.03 days, and we adjust its minimum mass to m sin i = 5.71 ± 0.92 M ⊕ . Using the diffuser-assisted ARCTIC imager on the ARC 3.5 m telescope at Apache Point Observatory, in addition to publicly available TESS and LCOGT photometry, we are able to constrain the radius of planet b to R p = 1.09 ± 0.04 R ⊕ . GJ 3929b is a top candidate for transmission spectroscopy in its size regime (TSM = 14 ± 4), and future atmospheric studies of GJ 3929b stand to shed light on the nature of small planets orbiting M dwarfs.

Exoplanets↗

Dielectric Permittivity Measurements of Geologic Samples at Venus Surface Temperatures

Synthetic-aperture radar (SAR) and radar sounding are two powerful remote sensing techniques used to examine the surface and subsurface of planets. Their value is critical in the case of Venus due to this planet’s global and visually opaque cloud layer. The recently selected VERITAS and EnVision orbital missions, slated to study the planet in the early 2030’s, employ radar instruments to image the surface (VERITAS and EnVision) and probe the subsurface (EnVision). For both techniques, the complex dielectric permittivity of the surface and subsurface materials control radar backscatter intensity and penetration depth. Since the 1970’s, many studies have characterized the dielectric permittivity of geologic materials collected both on Earth and on the Moon to constrain the radar reflectivity and transparency at a variety of radar frequencies [e.g., 1]. Two consistent findings from those studies are that complex permittivity depends on both the density (or porosity) and the composition of the material. Denser materials and more metal-rich compositions tend to have higher permittivity values and to incur greater propagation path loss. Water content also elevates permittivity of otherwise dry rocks/soils/regolith [e.g., 2]. However, permittivity is independent of frequency for the 0.5-18 GHz range, within which SAR imaging commonly lies. The one aspect poorly explored thus far is the effect of elevated temperatures on dielectric permittivity. Previous work suggests that increased lattice vibrations and flow of free electrons associated with an increase in temperature elevate both the real (reflectivity) and imaginary (path loss) parts of the complex permittivity. We are currently conducting a 3-year campaign to measure the complex dielectric permittivity of Venusrelevant geologic materials at Venus surface temperatures (380°C - 460°C) and with frequencies relevant to VERITAS, EnVision, and Magellan imaging synthetic aperture radars.

M Barmatz↗

The INAF Campo Imperatore Observatory in Abruzzo (Italy) as an Earth Observation Facility for the Study of Venus Night Airglows (VNAs)

The National Institute for Astrophysics (INAF) Campo Imperatore Observatory is located in the Gran Sasso mountains in Abruzzo, Italy, at an altitude of 2150 m above the sea level. The atmospheric transparency, along with the climatic conditions - especially in winter - have always made it a suitable site for observations in the near infrared (1 - 2 micron). The Campo Imperatore Observatory is equipped with the AZT-24 reflecting telescope, Ritchey-Chrétien configuration, with an aperture of 1.1 m. The new motorization system – currently in the commissioning phase - will allow great pointing and tracking accuracy (<0.1 arcsec), as well as an uncommonly fast-tracking speed (the mechanics is designed to reach 3 degrees/second). With this facility we are starting the ADvanced VENus’ Night Airglows Near-infrared Telescope (ADVENANT) project, which aims to observe and study Venus’ nightside airglows (VNAs).

P. D'Incecco↗

TRAPPIST-1 d: Exo-Venus, Exo-Earth, or Exo-Dead?

TRAPPIST-1 d is generally assumed to be at the boundary between a Venus-like world and an Earth-like world, although recently published works on TRAPPIST-1 b and c raise concerns that TRAPPIST-1 d may be similarly devoid of a substantial atmosphere. TRAPPIST-1 d is also relatively understudied in comparison with TRAPPIST-1 e. The latter has generally appeared to be within the habitable zone of most atmospheric modeling studies. Assuming that TRAPPIST-1 d still retains a substantial atmosphere, we demonstrate via a series of 3D general circulation model experiments using a dynamic ocean that the planet could reside within the habitable zone in a narrow parameter space. At the same time, it could also be an exo-Venus- or exo-Dead-type world or in transition between between one of these. Studies like this can help distinguish between these types of worlds.

Exoplanets↗

Plains Tectonics on Venus

Tectonic deformation in the plains of Venus is pervasive, with virtually every area of the planet showing evidence for faulting or fracturing. This deformation can be classified into three general categories, defined by the intensity and areal extent of the surface deformation: distributed deformation, concentrated deformation, and local fracture patterns.

tectonics tectonic formation tectonic deformation ↗

Venus Sample Return - A Hot Topic

Within th Solar System, Venus presents a set of unique challenges to obtaining samples and returning them to Earth.

Venus Sample Return Solar System samples Venus↗

BepiColombo Science Investigations During Cruise and Flybys at the Earth, Venus and Mercury

The dual spacecraft mission BepiColombo is the first joint mission between the European Space Agency (ESA) and the Japanese Aerospace Exploration Agency (JAXA) to explore the planet Mercury. BepiColombo was launched from Kourou (French Guiana) on October 20th, 2018, in its packed configuration including two spacecraft, a transfer module, and a sunshield. BepiColombo cruise trajectory is a long journey into the inner heliosphere, and it includes one flyby of the Earth (in April 2020), two of Venus (in October 2020 and August 2021), and six of Mercury (starting from 2021), before orbit insertion in December 2025. A big part of the mission instruments will be fully operational during the mission cruise phase, allowing unprecedented investigation of the different environments that will encounter during the 7-years long cruise. The present paper reviews all the planetary flybys and some interesting cruise configurations. Additional scientific research that will emerge in the coming years is also discussed, including the instruments that can contribute.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolution of Kelvin-Helmholtz instability at Venus in the presence of the parallel magnetic field

Two-dimensional MHD simulations were performed to study the evolution of the Kelvin-Helmholtz (KH) instability at the Venusian ionopause in response to the strong flow shear in presence of the in-plane magnetic field parallel to the flow direction. The physical behavior of the KH instability as well as the triggering and occurrence conditions for highly rolled-up vortices are characterized through several physical parameters, including Alfvén Mach number on the upper side of the layer, the density ratio, and the ratio of parallel magnetic fields between two sides of the layer. Using these parameters, the simulations show that both the high density ratio and the parallel magnetic field component across the boundary layer play a role of stabilizing the instability. In the high density ratio case, the amount of total magnetic energy in the final quasi-steady status is much more than that in the initial status, which is clearly different from the case with low density ratio. We particularly investigate the nonlinear development of the case that has a high density ratio and uniform magnetic field. Before the instability saturation, a single magnetic island is formed and evolves into two quasi-steady islands in the non-linear phase. A quasi-steady pattern eventually forms and is embedded within a uniform magnetic field and a broadened boundary layer. The estimation of loss rates of ions from Venus indicates that the stabilizing effect of the parallel magnetic field component on the KH instability becomes strong in the case of high density ratio.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗