Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

The 3F condensation polyimides: Review and update

Nine new condensation polyimides containing the phenyltrifluoroethylidene (3F) linkage were synthesized by the amic-acid route. Several other polyimides, including some with hexafluoroisopropylidene (6F) linkage, were also prepared as controls. Amic-acid solutions were characterized by determining their inherent viscosities prior to thermal conversion into polyimide films. Glass transition temperatures (T sub g), thermogravimetric analysis (TGA), and isothermal weight loss data (at 316, 371, and 371 C under 0.5 MPa air pressure) were obtained for the films. The films were pulverized into molding powders which, in turn, were thermally processed under pressure into neat resin disks. The disks were also characterized by T sub g's and 316 and 371 C isothermal weight losses. The film study identified two new polyimides with T sub g's greater than 371 C and two new polyimides with low rates of weight loss. The resin disks exhibited the same overall trends in T sub g and weight loss as the respective films, however the weight loss per unit surface area was always greater, presumably due to molecular degradation induced during preparation of the molding powders. The overall results indicate that polyimides containing the 3F linkage have T sub g's and thermo-oxidative stability comparable to polyimides containing the 6F group. Alternate technology was also shown by the synthesis of two new polyalkyl substituted 3F diamines and five more new 3F polymers. Their potential as photoresists was demonstrated by T sub g advancement after ultraviolet exposure. Last, four U.S. patents on 3F monomers and polymers were issued and up to eight more are pending.

Alston, William B.↗

Silicon nanowire synthesis by a vapor-liquid-solid approach

Synthesis of silicon nanowires is studied by using a vapor-liquid-solid growth technique. Silicon tetrachloride reduction with hydrogen in the gas phase is used with gold serving as catalyst to facilitate growth. Only a narrow set of conditions of SiCl4 concentration and temperature yield straight nanowires. High concentrations and temperatures generally result in particulates, catalyst coverage and deactivation, and coatinglike materials.

Evaluation Studies↗

Developing Interim Systems

One of the recent challenges in the aerospace industry has been to smoothly transition operations-oriented computer systems to meet increasing demands on smaller budgets. Sometimes the best solution is not affordable, but the current situation is equally untenable.

limitations resource-scavenging↗

Aerodynamics for the Mars Phoenix Entry Capsule

Pre-flight aerodynamics data for the Mars Phoenix entry capsule are presented. The aerodynamic coefficients were generated as a function of total angle-of-attack and either Knudsen number, velocity, or Mach number, depending on the flight regime. The database was constructed using continuum flowfield computations and data from the Mars Exploration Rover and Viking programs. Hypersonic and supersonic static coefficients were derived from Navier-Stokes solutions on a pre-flight design trajectory. High-altitude data (free-molecular and transitional regimes) and dynamic pitch damping characteristics were taken from Mars Exploration Rover analysis and testing. Transonic static coefficients from Viking wind tunnel tests were used for capsule aerodynamics under the parachute. Static instabilities were predicted at two points along the reference trajectory and were verified by reconstructed flight data. During the hypersonic instability, the capsule was predicted to trim at angles as high as 2.5 deg with an on-axis center-of-gravity. Trim angles were predicted for off-nominal pitching moment (4.2 deg peak) and a 5 mm off-axis center-ofgravity (4.8 deg peak). Finally, hypersonic static coefficient sensitivities to atmospheric density were predicted to be within uncertainty bounds.

Edquist, Karl T.↗

Development of a Microlith® Catalytic Oxidizer for Exploration Trace Contaminant Control

The state-of-the-art in long mission duration spacecraft trace contaminant control processes rely on high-temperature catalytic oxidation for light contaminant removal. Target compounds for oxidation include metabolic methane, carbon monoxide, and low molecular weight volatile organics such as formaldehyde and methanol. Precision Combustion, Inc. and NASA Marshall Space Flight Center have been developing and testing prototype high temperature catalytic oxidizers based on PCI’s patented Microlith® technology to meet the requirements of future spaceflight exploration missions. To this end, our latest generation Microlith oxidizer, featuring an integrated heat recuperator, was subjected to endurance testing to simulate catalyst ageing over a Mars transit mission duration. Periodic reactor health testing indicates our approach results in a robust contaminant control solution for exploration missions beyond low earth orbit. Based on the demonstrated performance of this unit, a next-generation prototype was designed to meet exploration contaminant load control demands while upgrading the prototype form and fit to match flight-compatible interfaces. Prototype design considerations intended to reduce power consumption, impacting process thermal and hydraulic performance, are discussed herein.

Trace Contaminant Control↗

India and the 21st Century Power Partnership; 21st Century Power Partnership

Indian leadership has been crucial in both the establishment of the foundational capabilities of the Power Partnership as well as the realization of opportunities for applied policy implementation. Understanding policy regimes that support and accelerate the transition to clean, smart, efficient, affordable, and reliable electricity will help inform decisions that enable innovative solutions, or even disruptive innovations. India has already demonstrated a wide variety of business model innovation in a wide range of industries. Its potential to do the same in the power sector is an enormous opportunity. Indian contributions to international knowledge about the legal, regulatory and business environment will be an integral component of the Power Partnership program.

21ST CENTURY POWER PARTNERSHIP↗

Microstructure and electrical-optical properties of cesium tungsten oxides synthesized by solvothermal reaction followed by ammonia annealing

Cesium tungsten oxides (Cs{sub x}WO{sub 3}) were synthesized by solvothermal reactions using ethanol and 57.1 vol% ethanol aqueous solution at 200 {sup o}C for 12 h, and the effects of post annealing in ammonia atmosphere on the microstructure and electrical-optical properties were investigated. Agglomerated particles consisting of disk-like nanoparticles and nanorods of Cs{sub x}WO{sub 3} were formed in the pure ethanol and ethanol aqueous solutions, respectively. The samples retained the original morphology and crystallinity after annealing in ammonia atmosphere up to 500 {sup o}C, while a small amount of nitrogen ion were incorporated in the lattice. The as-prepared Cs{sub x}WO{sub 3} sample showed excellent near infrared (NIR) light shielding ability as well as high transparency in the visible light region. The electrical resistivity of the pressed pellets of the powders prepared in pure ethanol and 57.1 vol% ethanol aqueous solution greatly decreased after ammonia annealing at 500 {sup o}C, i.e., from 734 to 31.5 and 231 to 3.58 {Omega} cm, respectively. - Graphical abstract: Cesium tungsten oxides (Cs{sub x}WO{sub 3}) with different morphology were synthesized by solvothermal reaction, and the effects of post-ammonia annealing on the microstructure and electrical-optical properties were investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and structural characterization of three copper coordination polymers with pyridine derivatives from hydro(solvo)thermal in situ decarboxylation reactions of 2,5-dicarboxylpyridine

The hydro(solvo)thermal self-assembles of CuI, KI and 2,5-dicarboxylpyridine [2,5-(COOH){sub 2}py] in different molar ratios in H{sub 2}O/alcohol solutions produced three Cu coordination polymers as 2-D [N-C{sub 2}H{sub 5}py][Cu{sub 3}I{sub 4}] 1, 1-D [N-CH{sub 3}py][Cu{sub 2}I{sub 3}] 2 as well as 1-D [Cu(2-COOpy){sub 2}]{center_dot}H{sub 2}O 3 (N-C{sub 2}H{sub 5}py=N-ethylpyridine, N-CH{sub 3}py=N-methylpyridine, 2-COOpy=2-carboxylpyridine). N-C{sub 2}H{sub 5}py in 1 and N-CH{sub 3}py in 2 derived from the solvothermal in situ simultaneous decarboxylation and N-alkylation reactions of 2,5-(COOH){sub 2}py. The semi-decarboxylation reaction of 2,5-(COOH){sub 2}py into 2-COOpy occurred in the preparation of 3. X-ray single-crystal analysis revealed that CuI is transformed into a 2-D [Cu{sub 3}I{sub 4}]{sup -} layer in compound 1 and a 1-D chain in compound 2, templated by [N-C{sub 2}H{sub 5}py]{sup +} and [N-CH{sub 3}py]{sup +}, respectively. Compound 3 is a divalent Cu compound. The Cu(II) centers with a 4+2 geometry are coordinated by {mu}{sub 3}-mode 2-COOpy ligands. All of the title compounds were characterized by CHN analysis, IR spectrum analysis and TG analysis. Compounds 1 and 2 exhibit fluorescence properties with the maximum emissions at 581 nm for 1 and 537 nm for 2. - Graphical abstract: Three compounds were obtained via in situ metal-ligand hydro(solvo)thermal reactions of 2,5-(cooh){sub 2}py with cui. Three types of in situ reactions occurred for 2,5-(cooh){sub 2}py: decarboxylation n-ethylated in 1, n-methylated in 2 and semi-decarboxylation in 3.

36 MATERIALS SCIENCE↗

Los Angeles 100% Clean Energy Equity Strategies

The National Renewable Energy Laboratory and Los Angeles Department of Water and Power set out to identify strategies to improve equity in LA's transition to 100% clean energy. Through social science research, NREL summarized underserved community member challenges and solutions from listening sessions and community-based organizations. NREL modeled future scenarios for solar, transportation electrification, rates, building technologies, and the distribution grid to identify strategies that improved community-prioritized equity metrics. Findings provide specific strategies relevant for LA and elsewhere to improve equity and affordability in achieving 100% clean energy.

100% clean energy↗

Effect of dilution on the spin pairing transition in rhombohedral carbonates

The compressibility of an iron-bearing magnesite (Mg{sub 0.87}Fe{sub 0.12}{sup 2+}Ca{sub 0.01}) CO{sub 3} was determined by means of single crystal diffraction up to 64 GPa. Up to 49 GPa the pressure-evolution of the unit cell volume of the solid solution with 12% of Fe{sup 2+} can be described by a third-order Birch-Murnaghan equation of state with parameters V{sub 0} = 281.0(5) {angstrom}{sup 3}, K{sub 0} = 102.8(3) GPa, K{prime}{sub 0} = 5.44. The spin pairing of the Fe{sup 2+} d-electrons occurs between 49 and 52 GPa, as evidenced by a discontinuous volume change. The transition pressure is increased by about 5 GPa compared with the iron end-member; an effect consistent with a cooperative contribution of adjacent clusters to the spin transition. The trend is, however, opposite in the periclase-wustite solid solution. Differences among the two structures, in particular in the Fe-Fe interactions, that might explain the different behavior are discussed.

36 MATERIALS SCIENCE↗

Crystal structure, magnetic and infrared spectroscopy studies of the LiCr{sub y}Fe{sub 1-y}P{sub 2}O{sub 7} solid solution

The lithium double diphosphates LiCr{sub y}Fe{sub 1-y}P{sub 2}O{sub 7} have been investigated by X-ray diffraction, SQUID measurements and vibrational spectroscopy. The Rietveld refinements based on the XRD patterns show the existence of a continuous solid solution over the whole composition range (0<=y<=1.0) with a continuous evolution of the monoclinic unit cell parameters (S.G. P2{sub 1}). The transition metal ions connect the diphosphate anions forming a three-dimensional network with channels filled by Li{sup +} cations expected to exhibit high mobility. All compounds order magnetically at low temperatures due the Fe-Fe interactions. The ordering temperature decreases with increasing Cr content. The slope in Curie-Weiss fits to the 1/chi vs T data in the paramagnetic domain clearly shows the existence of Fe{sup 3+} and Cr{sup 3+} in their high spin states, and a ferromagnetic component is clearly detected for y=0, 0.2 and 0.4. IR spectra have been interpreted using factor group analysis. The small shift of the frequencies is due to the influence of the chromium amount. The POP angles were estimated using the Lazarev's relationship. - Graphical abstract: Crystal structure of LiCr{sub y}Fe{sub 1-y}P{sub 2}O{sub 7} diphosphates, view along the 'a' axis. Red circles denote the lithium atoms. For interpretation of this figure legend, the reader is referred to the web version of this article.

36 MATERIALS SCIENCE↗

Synthesis and characterization of negative thermal expansion HfW{sub 2-x}V{sub x}O{sub 8-x/2} solid solutions

Cubic HfW{sub 2-x}V{sub x}O{sub 8-x/2} (c-HfW{sub 2-x}V{sub x}O{sub 8-x/2}) solid solutions, where x is up to 0.34, were synthesized using a process of acidic steam hydrothermal (ASH)-thermal dehydrating precursors. The process is studied detailedly. The results reveal tetragonal HfW{sub 2-x}V{sub x}O{sub 7-x/2}(OH){sub 2}(H{sub 2}O){sub 2} precursors are synthesized after ASH treatment and they produce orthorhombic HfW{sub 2-x}V{sub x}O{sub 8-x/2} in dehydrating. Then c-HfW{sub 2-x}V{sub x}O{sub 8-x/2} are obtained at higher temperature. The crystal structures of c-HfW{sub 2-x}V{sub x}O{sub 8-x/2} are characterized as {alpha}-HfW{sub 2}O{sub 8} and {beta}-HfW{sub 2}O{sub 8} structure for 0{<=}x{<=}0.30 and x=0.34, respectively. All the c-HfW{sub 2-x}V{sub x}O{sub 8-x/2} show excellent negative thermal expansion property. The relationships between the properties, such as ordered degree parameter, crystal lattice parameter, phase transition temperature and linear average thermal expansion coefficient, and the V content are also discussed. - Graphical abstract: Novel c-HfW{sub 2-x}V{sub x}O{sub 8-x/2} solid solutions were synthesized and all of them still show excellent negative thermal expansion property. Highlights: Black-Right-Pointing-Pointer Novel cubic HfW{sub 2-x}V{sub x}O{sub 8-x/2} solid solutions and their precursors were synthesized. Black-Right-Pointing-Pointer Cubic HfW{sub 2-x}V{sub x}O{sub 8-x/2} solid solutions show excellent negative thermal expansion. Black-Right-Pointing-Pointer The relationship between the properties of the samples and the V content is revealed. Black-Right-Pointing-Pointer x up to 0.34, a rare large solid solubility in aliovalent substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refined rotational period, pole solution, and shape model for (3200) Phaethon

(3200) Phaethon exhibits both comet- and asteroid-like properties, suggesting it could be a rare transitional object such as a dormant comet or previously volatile-rich asteroid. This justifies detailed study of (3200) Phaethon's physical properties as a better understanding of asteroid-comet transition objects can provide insight into minor body evolution. We therefore acquired time series photometry of (3200) Phaethon over 15 nights from 1994 to 2013, primarily using the Tektronix 2048 × 2048 pixel CCD on the University of Hawaii 2.2 m telescope. We utilized light curve inversion to (1) refine (3200) Phaethon's rotational period to P = 3.6032 ± 0.0008 hr; (2) estimate a rotational pole orientation of λ = +85° ± 13° and β = –20° ± 10°; and (3) derive a shape model. We also used our extensive light curve data set to estimate the slope parameter of (3200) Phaethon's phase curve as G ∼ 0.06, consistent with C-type asteroids. We discuss how this highly oblique pole orientation with a negative ecliptic latitude supports previous evidence for (3200) Phaethon's origin in the inner main asteroid belt as well as the potential for deeply buried volatiles fueling impulsive yet rare cometary outbursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Morphological-evolution pathway during phase separation in polymer solutions with highly asymmetrical miscibility gap

Microstructural evolution during thermally induced phase separation in a polymer solution with a highly asymmetrical miscibility gap is analyzed using Flory-Huggins thermodynamics and nonlinear Cahn-Hilliard kinetics. Computer simulation results demonstrate that, in contrast to systems with symmetric miscibility gaps, interesting morphological-evolution pathways (MEPs) including cluster-to-percolation and percolation-to-cluster transitions are identified. These MEPs are rationalized according to asynchronous evolution of the two product phases. For a highly asymmetric polymer system, the initial solution composition is also found to play a critical role in determining the MEPs. According to the simulation results a map of MEPs in terms of initial solution composition and aging time of phase separation is established to guide future microstructural design in asymmetrical polymer solutions.

36 MATERIALS SCIENCE↗

Cosmological evolution in vector-tensor theories of gravity

We present a detailed study of the cosmological evolution in general vector-tensor theories of gravity without potential terms. We consider the evolution of the vector field throughout the expansion history of the Universe and carry out a classification of models according to the behavior of the vector field in each cosmological epoch. We also analyze the case in which the Universe is dominated by the vector field, performing a complete analysis of the system phase map and identifying those attracting solutions which give rise to accelerated expansion. Moreover, we consider the evolution in a universe filled with a pressureless fluid in addition to the vector field and study the existence of attractors in which we can have a transition from matter domination to vector domination with accelerated expansion so that the vector field may play the role of dark energy. We find that the existence of solutions with late-time accelerated expansion is a generic prediction of vector-tensor theories and that such solutions typically lead to the presence of future singularities. Finally, limits from local gravity tests are used to get constraints on the value of the vector field at small (Solar System) scales.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bifurcation Analysis Reveals Solution Structures of Phase Field Models

The phase field method is playing an increasingly important role in understanding and predicting morphological evolution in materials and biological systems. Here, in this study, we develop a new analytical approach based on the bifurcation analysis to explore the mathematical solution structure of phase field models. Revealing such solution structures not only is of great mathematical interest but also may provide guidance to experimentally or computationally uncover new morphological evolution phenomena in materials undergoing electronic and structural phase transitions. To elucidate the idea, we apply this analytical approach to three representative phase field equations: the Allen-Cahn equation, the Cahn-Hilliard equation, and the Allen-Cahn-Ohta-Kawasaki system. The solution structures of these three phase field equations are also verified numerically by the homotopy continuation method.

97 MATHEMATICS AND COMPUTING↗

The pros and cons of code validation

Computational and wind tunnel error sources are examined and quantified using specific calculations or experimental data, and a substantial comparison of theoretical and experimental results, or a code validation, is discussed. Wind tunnel error sources considered include wall interference, sting effects, Reynolds number effects, flow quality and transition, and instrumentation such as strain gage balances, electronically scanned pressure systems, hot film gages, hot wire anemometers, and laser velocimeters. Computational error sources include math model equation sets, the solution algorithm, artificial viscosity/dissipation, boundary conditions, the uniqueness of solutions, grid resolution, turbulence modeling, and Reynolds number effects. It is concluded that although improvements in theory are being made more quickly than in experiments, wind tunnel research has the advantage of the more realistic transition process of a right turbulence model in a free-transition test.

Bobbitt, Percy J.↗

The pros and cons of code validation

Computational and wind tunnel error sources are examined and quantified using specific calculations of experimental data, and a substantial comparison of theoretical and experimental results, or a code validation, is discussed. Wind tunnel error sources considered include wall interference, sting effects, Reynolds number effects, flow quality and transition, and instrumentation such as strain gage balances, electronically scanned pressure systems, hot film gages, hot wire anemometers, and laser velocimeters. Computational error sources include math model equation sets, the solution algorithm, artificial viscosity/dissipation, boundary conditions, the uniqueness of solutions, grid resolution, turbulence modeling, and Reynolds number effects. It is concluded that, although improvements in theory are being made more quickly than in experiments, wind tunnel research has the advantage of the more realistic transition process of a right turbulence model in a free-transition test.

Bobbitt, Percy J.↗