Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Understanding the role of NH 4 F and Al 2 O 3 surface co-modification on lithium-excess layered oxide Li 1.2 Ni 0.2 Mn 0.6 O 2

In this work we prepared Li 1.2 Ni 0.2 Mn 0.6 O 2 (LNMO) using a hydroxide co-precipitation method and investigated the effect of co-modification with NH 4 F and Al 2 O 3 . After surface co-modification, the first cycle Coulombic efficiency of Li 1.2 Ni 0.2 Mn 0.6 O 2 improved from 82.7% to 87.5%, and the reversible discharge capacity improved from 253 to 287 mAh g –1 at C/20. Moreover, the rate capability also increased significantly. A combination of neutron diffraction (ND), high-resolution transmission electron microscopy (HRTEM), aberration-corrected scanning transmission electron microscopy (a-STEM)/electron energy loss spectroscopy (EELS), and X-ray photoelectron spectroscopy (XPS) revealed the changes of surface structure and chemistry after NH 4 F and Al 2 O 3 surface co-modification while the bulk properties showed relatively no changes. These complex changes on the material s surface include the formation of an amorphous Al 2 O 3 coating, the transformation of layered material to a spinel-like phase on the surface, the formation of nanoislands of active material, and the partial chemical reduction of surface Mn 4+ . Such enhanced discharge capacity of the modified material can be primarily assigned to three aspects: decreased irreversible oxygen loss, the activation of cathode material facilitated with preactivated Mn 3+ on the surface, and stabilization of the Ni-redox pair. In conclusion, these insights will provide guidance for the surface modification in high-voltage-cathode battery materials of the future.

36 MATERIALS SCIENCE↗

γ-Fe 2 O 3 Nanocrystalline Microspheres with Hybrid Behavior of Battery-Supercapacitor for Superior Lithium Storage

Maghemite (γ-Fe2O3) nanocrystalline microspheres (MNMs) self-assembled with 52 nm nanocrystals bridged with FeOOH around grain boundaries were formed by solvothermal reaction and thermal oxidation. The unique architecture endows the MNMs with the lithium storage behavior of a hybrid battery-supercapacitor electrode: initial charge capacity of 1060 mAh g–1 at the 100 mA g–1 rate, stable cyclic capacity of 1077.9 mAh g–1 at the same rate after 140 cycles, and rate capability of 538.8 mAh g–1 at 2400 mA g–1. This outstanding performance was attributed to the nanocrystal superiority, which shortens the Li+ diffusion paths. The mechanism of this hybrid anode material was investigated with experimental measurements and structural analysis. The results indicate that at the first discharge, the MNM nanocrystal microsphere, whose structure can buffer the volume change that occurs during lithiation/delithiation, goes through four stages: Li+ insertion in cation vacancies, spinel-to-rocksalt transformation, Li+ intercalation of Li1.75+xFe2O3 nanocrystals, and interfacial Li storage around nanocrystal boundaries. Only the latter two stages were reversible at and after the second charging/discharging cycle, exhibiting the hybrid behavior of a battery-supercapacitor with superior lithium storage.

ferric oxide↗

Oxidation Protection with Amorphous Surface Oxides: Thermodynamic Insights from Ab Initio Simulations on Aluminum

Native surface films play a key role in the oxidation and corrosion protection of functional and structural materials. In this work, we introduce a fully ab initio approach for understanding the thermodynamic driving force behind the initial phase selection among amorphous and crystalline structures for a surface film growing on a crystalline substrate. We apply the approach to elucidate the competition among corundum (α), spinel (γ), and amorphous (am.) Al 2 O 3 films growing on aluminum metal. We show that the amorphous Al 2 O 3 film becomes thermodynamically the most stable form below around ~1 nm, that is, the relative energetic stabilities of thin polymorphic Al 2 O films follow am. < γ < α. As the film thickness increases, the relative stability relation first changes to γ < α < am. and then to the bulk limit of α < γ < am. The nanoscale γ films distort substantially to form exclusively four- and fivefold-coordinated Al–O polyhedra, lose the close-packed O framework, and become “amorphous-like”, that is, exhibit both short-range order and energetic characteristics that are commensurate with the amorphous form. Our findings offer a quantitative, first-principles confirmation for the early hypotheses on the thermodynamic stability of amorphous surface films and provide insights for the critical role they play in oxidation protection. Handling the complexities associated with the initial film growth, including bulk, surface, interface, and strain energy effects in realistically complex ab initio simulations, we expect this approach to contribute to understanding of the mechanism behind effective passivation films for aluminum alloys and beyond.

36 MATERIALS SCIENCE↗

Distinct Surface and Bulk Thermal Behaviors of LiNi 0.6 Mn 0.2 Co 0.2 O 2 Cathode Materials as a Function of State of Charge

Understanding how structural and chemical transformations take place in particles under thermal conditions can inform designing thermally robust electrode materials. Such a study necessitates the use of diagnostic techniques that are capable of probing the transformations at multiple length scales and at different states of charge (SOC). In this study, the thermal behavior ofLiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC-622) was examined as a function of SOC, using an array of bulk and surface-sensitive techniques. In general, thermal stability decreases as lithium content is lowered and conversion in the bulk to progressively reduced metal oxides (spinels, rock salt) occurs as the temperature is raised. Hard X-ray absorption spectroscopy (XAS) and X-ray Raman spectroscopy (XRS) experiments, which probe the bulk, reveal that Ni and Co are eventually reduced when partially delithiated samples (regardless of the SOC) are heated, although Mn is not. Surface-sensitive synchrotron techniques, such as soft XAS and transmission X-ray microscopy (TXM), however, reveal that for 50% delithiated samples, apparent oxidation of nickel occurs at particle surfaces under some circumstances. This is partially compensated by reduction of cobalt but may also be a consequence of redistribution of lithium ions upon heating. TXM results indicate the movement of reduced nickel ions into particle interiors or oxidized nickel ions to the surface or both. These experiments illustrate the complexity of the thermal behavior of NMC cathode materials. The study also informs the importance of investigating the surface and bulk difference as a function of SOC when studying the thermal behaviors of battery materials.

25 ENERGY STORAGE↗

Enhancing the Electrocatalysis of LiNi 0.5 Co 0.2 Mn 0.3 O 2 by Introducing Lithium Deficiency for Oxygen Evolution Reaction

LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523), as a cathode material for rechargeable lithium-ion batteries, has attracted considerable attention and been successfully commercialized for decades. NCM is also a promising electrocatalyst for the oxygen evolution reaction (OER), and the catalytic activity is highly correlated to its structure. In this paper, we successfully obtain NCM523 with three different structures: spinel NCM synthesized at low temperature (LT-NCM), disordered NCM (DO-NCM) with lithium deficiency obtained at high temperature, and layered hexagonal NCM at high temperature (HT-NCM). By introducing lithium deficiency to tune the valence state of transition metals in NCM from Ni 2+ to Ni 3+ , DO-NCM exhibits the best catalytic activity with the lowest onset potential (~1.48 V) and Tafel slope (~85.6 mV dec -1 ), whereas HT-NCM exhibits the worst catalytic activity with the highest onset potential (~1.63 V) and Tafel slope (~241.8 mV dec -1 ).

36 MATERIALS SCIENCE↗

Pulsed Laser Deposition and Characterization of Heteroepitaxial LiMn 2 O 4 /La 0.5 Sr 0.5 CoO 3 Bilayer Thin Films as Model Lithium Ion Battery Cathodes

Epitaxial LiMn 2 O 4 (LMO)/La 0.5 Sr 0.5 CoO 3 (LSCO) bilayer thin films were grown on single crystalline SrTiO 3 (STO) (111) substrates as model lithium ion battery cathodes. The LSCO layer was used as an electrically conducting buffer layer for electrochemical testing. The LMO and LSCO layers were both epitaxial, with sub-nano flat LMO/LSCO interfaces as seen by X-ray diffraction, synchrotron X-ray scattering, and high-resolution transmission electron microscopy (HRTEM), but with a large LMO surface roughness due to the relatively large lattice mismatch with LSCO. Three-dimensional islands and depressions were formed on the strain-relaxed LMO layer, and misfit dislocations at the LMO/LSCO interface were discerned through HRTEM imaging, suggesting a Stranski–Krastanov (SK) mode thin-film growth. A crystalline structural change from cubic spinel at the LMO surface and interior to tetragonal oxygen-deficient LMO at the LMO/LSCO interface was examined. Furthermore, electrochemical tests along with in situ synchrotron X-ray scattering measurements on the epitaxial LMO/LSCO bilayers showed a significant loss of capacity after the first cycle, which was attributed to an electrical conductivity loss of the LSCO buffer layer due to irreversible lattice oxygen loss.

25 ENERGY STORAGE↗

Lithium-Ion Battery Materials as Tunable, “Redox Non-Innocent” Catalyst Supports

The development of general strategies for the electronic tuning of a catalyst’s active site is an ongoing challenge in heterogeneous catalysis. To this end, herein, we describe the application of Li-ion battery cathode and anode materials as redox non-innocent catalyst supports that can be continuously modulated as a function of lithium intercalation. A zero-valent nickel complex was oxidatively grafted onto the surface of lithium manganese oxide (Li x Mn 2 O 4 ) to yield isolated Ni2+ occupying the vacant interstitial octahedral site in the Li diffusion channel on the surface and subsurface of the spinel structure (Ni/Li x Mn 2 O 4 ). Additionally, the activity of Ni/Li x Mn 2 O 4 for olefin hydrogenation, as a representative probe reaction, was found to increase monotonically as a function of support reductive lithiation. Simulation of Ni/Li x Mn 2 O 4 reveals the dramatic impact of surface redox states on the viability of the homolytic oxidative addition mechanism for H 2 activation. Catalyst control through support lithiation was extended to an organotantalum complex on Li x TiO 2 , demonstrating the generality of this phenomenon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Active Sites of MoS 2 Based Hydrotreating Catalysts Using Modulation Excitation Spectroscopy

The reactive surface sites of MoS 2 hydrotreating catalysts (unpromoted as well as Co- and Ni-promoted) supported on MgAl 2 O 4 spinel were investigated with respect to the substitution of sulfur by oxygen using in situ XAS coupled with modulation excitation spectroscopy (MES). Specifically, MES experiments were carried out by periodically cycling between a H 2 O and H 2 S containing hydrogen gas mixture at 400 °C. Due to the low fraction of S–O exchange, conventional XANES and EXAFS data hardly showed any changes when these catalysts were exposed to increasing ratios of H 2 O to H 2 S in an H 2 atmosphere. XANES and EXAFS data extracted at the Mo K-edge by MES analysis showed that for approximately 1% of the Mo atoms, sulfur atoms are replaced by oxygen atoms when exposed to H 2 O, causing partial oxidation of these active sites. The reaction is reversible and Mo returns to its initial sulfide phase when H 2 O is removed and H 2 S is supplied in the feed. In the case of Co- and Ni-promoted catalysts, the magnitude of S–O exchange was found to be reduced, indicating the beneficial effect of promotion. MES at the Ni K-edge showed that Ni was oxidized during H 2 O exposure, which in turn delayed the Mo oxidation in the Ni-promoted catalyst. The structures of these catalysts under S–O exchange were modeled using density functional theory (DFT) calculations, showing that the edge atoms are affected strongly. For all three catalysts, OH substitution is more favorable, while O substitution could be possible at high H 2 O pressure for unpromoted MoS 2 . Mo K-edge XANES spectra calculated using these simulated structures support the results obtained from the MES experiments. In conclusion, the presented approach using MES in combination with XAS and supported by DFT can be extended in general to catalysts under operando conditions and is thus a useful tool for determination of the active site on an atomic-scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring the First High-Entropy Thin Film Libraries: Composition Spread-Controlled Crystalline Structure

Thin films of two types of high-entropy oxides (HEOs) have been deposited on 76.2 mm Si wafers using combinatorial sputter deposition. In one type of the oxides, (MgZnMnCoNi)O x , all the metals have a stable divalent oxidation state and similar cationic radii. In the second type of oxides, (CrFeMnCoNi)O x , the metals are more diverse in the atomic radius and valence state, and have good solubility in their sub-binary and ternary oxide systems. Therefore, the resulting HEO thin films were characterized using several high-throughput analytical techniques. The microstructure, composition, and electrical conductivity obtained on defined grid maps were obtained for the first time across large compositional ranges. The crystalline structure of the films was observed as a function of the metallic elements in the composition spreads, that is, the Mn and Zn in (MgZnMnCoNi)O x and Mn and Ni in (CrFeMnCoNi)O x . The (MgZnMnCoNi)O x sample was observed to form two-phase structures, except single spinel structure was found in (MgZnMnCoNi)O x over a range of Mn > 12 at. % and Zn < 44 at. %, while (CrFeMnCoNi)O x was always observed to form two-phase structures. Composition-controlled crystalline structure is not only experimentally demonstrated but also supported by density function theory calculation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of an Anti-Core–Shell Structure in Layered Oxide Cathodes for Li-Ion Batteries

The layered → rock-salt phase transformation in the layered dioxide cathodes for Li-ion batteries is believed to result in a “core-shell” structure of the primary particles, in which the core region maintains as the layered phase while the surface region undergoes the phase transformation to the rock-salt phase. Using transmission electron microscopy, here we demonstrate the formation of an “anti-core-shell” structure in cycled primary particles with a formula of LiNi0.80Co0.15Al0.05O2, in which the surface and subsurface regions remain as the layered structure while the rock-salt phase forms as domains in the bulk with a thin layer of the spinel phase between the rock-salt core and the skin of the layered phase. Formation of this anti-core-shell structure is attributed to the oxygen loss at the surface that drives the migration of oxygen from the bulk to the surface, thereby resulting in localized areas of significantly reduced oxygen levels in the bulk of the particle, which subsequently undergoes the phase transformation to the rock-salt domains. The formation of the anti-core-shell rock-salt domains is responsible for the reduced capacity, discharge voltage and ionic conductivity in cycled cathode.

25 ENERGY STORAGE↗

Applying Configurational Complexity to the 2D Ruddlesden–Popper Crystal Structure

The layered Ruddlesden–Popper crystal structure can host a broad range of functionally important behaviors. In this work, we establish extraordinary configurational disorder in a layered Ruddlesden–Popper (RP) structure using entropy stabilization assisted synthesis. A protype A 2 CuO 4 RP cuprate oxide with five cations on the A-site sublattice is designed and fabricated into epitaxial single crystal films using pulsed laser deposition. When grown on a near lattice matched substrate, the (La 0.2 Pr 0.2 Nd 0.2 Sm 0.2 Eu 0.2 ) 2 CuO 4 film features a T'-type RP structure with uniform A-site cation mixing and square-planar CuO4 units. These observations are made with a range of combined characterizations using X-ray diffraction, atomic-resolution scanning transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption spectroscopy measurements. It is further found that heteroepitaxial strain plays an important role in crystal phase formation during synthesis. Compressive strain over ~1.5% results in the formation of a non-RP cubic phase consistent with a Cu X 2O 4 spinel structure. The ability to manipulate configurational complexity and move between 2D layered RP and 3D cubic crystal structures in cuprate and related materials promises to enable flexible design strategies for a range of functionalities, such as magnetoresistance, unconventional superconductivity, ferroelectricity, catalysis, and ion transport.

36 MATERIALS SCIENCE↗

Structural changes and thermal stability of charged LiNi x Mn y Co z O 2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy

Thermal stability of charged LiNi x Mn y Co z O 2 (NMC, with x + y + z = 1, x:y:z = 4:3:3 (NMC433), 5:3:2 (NMC532), 6:2:2 (NMC622), and 8:1:1 (NMC811)) cathode materials is systematically studied using combined in situ time- resolved X-ray diffraction and mass spectroscopy (TR-XRD/MS) techniques upon heating up to 600 °C. The TR-XRD/MS results indicate that the content of Ni, Co, and Mn significantly affects both the structural changes and the oxygen release features during heating: the more Ni and less Co and Mn, the lower the onset temperature of the phase transition (i.e., thermal decomposition) and the larger amount of oxygen release. Interestingly, the NMC532 seems to be the optimized composition to maintain a reasonably good thermal stability, comparable to the low-nickel-content materials (e.g., NMC333 and NMC433), while having a high capacity close to the high-nickel-content materials (e.g., NMC811 and NMC622). The origin of the thermal decomposition of NMC cathode materials was elucidated by the changes in the oxidation states of each transition metal (TM) cations (i.e., Ni, Co, and Mn) and their site preferences during thermal decomposition. It is revealed that Mn ions mainly occupy the 3a octahedral sites of a layered structure (R3¯m) but Co ions prefer to migrate to the 8a tetrahedral sites of a spinel structure (Fd3¯m) during the thermal decomposition. Such element-dependent cation migration plays a very important role in the thermal stability of NMC cathode materials. The reasonably good thermal stability and high capacity characteristics of the NMC532 composition is originated from the well-balanced ratio of nickel content to manganese and cobalt contents. As a result, this systematic study provides insight into the rational design of NMC-based cathode materials with a desired balance between thermal stability and high energy density.

25 ENERGY STORAGE↗

Probing the Degradation Mechanism of Li2MnO3 Cathode for Li-Ion Batteries

Capacity and voltage fading of Li2MnO3 is a major challenge for the application of this category of material, which is believed to be associated with the structural and chemical evolution of the materials. This paper reports the detailed structural and chemical evolutions of Li2MnO3 cathode captured by using aberration corrected scanning/transmission electron microscope (S/TEM) after certain numbers of charge-discharge cycling of the batteries. It is found that structural degradation occurs from the very first cycle and is spatially initiated from the surface of the particle and propagates towards the inner bulk as cyclic number increase, featuring the formation of the surface phase transformation layer and gradual thickening of this layer. The structure degradation is found to follow a sequential phase transformation: monoclinic C2/m → tetragonal I41 → cubic spinel, which is consistently supported by the decreasing lattice formation energy based on DFT calculations. For the first time, high spatial resolution quantitative chemical analysis reveals that 20% oxygen in the surface phase transformation layer is removed and such newly developed surface layer is a Li-depleted layer with reduced Mn cations. This work demonstrates a direct correlation between structural degradation and cell’s electrochemical degradation, which enhances our understanding of Li-Mn-rich (LMR) cathode materials.

Environmental Molecular Sciences Laboratory↗

Synthesis, characterization and electrochemmistry of lithium battery electrodes : xLi{sub 2}MnO{sub 3}{center_dot}(1-x)LiMn{sub 0.333}Ni{sub 0.333}Co{sub 0.333}O{sub2} (0{le}x{le}0.7).

Lithium- and manganese-rich layered electrode materials, represented by the general formula xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMO{sub 2} in which M is Mn, Ni, and Co, are of interest for both high-power and high-capacity lithium ion cells. In this paper, the synthesis, structural and electrochemical characterization of xLi{sub 2}MnO{sub 3} {center_dot} (1-x)LiMn{sub 0.333}Ni{sub 0.333}Co{sub 0.333}O{sub 2} electrodes over a wide compositional range (0 {le} x {le} 0.7) is explored. Changes that occur to the compositional, structural, and electrochemical properties of the electrodes as a function of x and the importance of using a relatively high manganese content and a high charging potential (>4.4 V) to generate high capacity (>200 mAh/g) electrodes are highlighted. Particular attention is given to the electrode composition 0.3Li{sub 2}MnO{sub 3} {center_dot} 0.7LiMn{sub 0.333}Ni{sub 0.333}Co{sub 0.333}O{sub 2} (x = 0.3) which, if completely delithiated during charge, yields Mn{sub 0.533}Ni{sub 0.233}Co{sub 0.233}O{sub 2}, in which the manganese ions are tetravalent and, when fully discharged, LiMn{sub 0.533}Ni{sub 0.233}Co{sub 0.233}O{sub 2}, in which the average manganese oxidation state (3.44) is marginally below that expected for a potentially damaging Jahn-Teller distortion (3.5). Acid treatment of 0.3Li{sub 2}MnO{sub 3} {center_dot} 0.7LiMn{sub 0.333}Ni{sub 0.333}Co{sub 0.333}O{sub 2} composite electrode structures with 0.1 M HNO{sub 3} chemically activates the Li{sub 2}MnO{sub 3} component and essentially eliminates the first cycle capacity loss but damages electrochemical behavior, consistent with earlier reports for Li{sub 2}MnO{sub 3}-stabilized electrodes. Differences between electrochemical and chemical activation of the Li{sub 2}MnO{sub 3} component are discussed. Electrochemical charge/discharge profiles and cyclic voltammogram data suggest that small spinel-like regions, generated in cycled manganese-rich electrodes, serve to stabilize the electrodes, particularly at low lithium loadings (high potentials). The study emphasizes that, for high values of x, a relatively small LiMO{sub 2} concentration stabilizes a layered Li{sub 2}MnO{sub 3} electrode to reversible lithium insertion and extraction when charged to a high potential.

74 ATOMIC AND MOLECULAR PHYSICS↗

Hydrogen production by reforming of simulated hot coke oven gas over nickel catalysts promoted with lanthanum and cerium in a membrane reactor

Catalysts of Ni/Mg(Al)O promoted with lanthanum and cerium were tested in a BaCo{sub 0.7}Fe{sub 0.2}Nb{sub 0.1}O{sub 3{delta}} (BCFNO) membrane reactor by catalytic partial oxidation of simulated hot coke oven gas (COG) with toluene as a model tar compound under atmospheric pressure. Analysis of the catalysts suggested that the hydrotalcite precursor after thermal treatment lead to a good dispersion of nickel forming the solid solution NiO-MgO and spinel (Ni,Mg)Al{sub 2}O{sub 4}. The promoted catalysts had higher oxygen permeation flux, better catalytic activity, and better resistance to carbon formation, which will be promising catalysts in the catalytic partial oxidation reforming of hot COG. 29 refs., 11 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

High-temperature adsorption of carbon dioxide on mixed oxides derived from hydrotalcite-like compounds

Various X{sub n}Y{sub 3}-{sub n}Al-hydrotalcite-like compounds (HTlcs) were synthesized by the constant pH coprecipitation method with the (X{sup 2+} + Y{sup 2+})/Al{sup 3+} molar ratio fixed at 3.0. Well-mixed oxides X{sub n}Y{sub 3}-{sub n}AlO were derived from corresponding HTlcs precursors upon calcination. Physicochemical characterization with X-ray diffraction analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and the Brunauer-Emmett-Teller equation indicates that the derived oxides are of either periclase or spinel phase, with an interparticle pore diameter of 9.6-15.4 nm. These oxides generally show a high CO{sub 2} adsorption capability at 350{sup o}C. For example, CaCoAlO captures 1.39 mmol/g of CO{sub 2} (i.e., 6.12 wt %) from a gas mixture (8% CO{sub 2} in N{sub 2}) at 350{sup o}C and 1 atm in a fixed-bed reactor within 20 min. All other mixed oxides adsorb 0.87-1.28 mmol/g (3.83-5.63 wt %) of CO{sub 2}. Therefore, these mixed oxides are potential cost-effective CO{sub 2} sorbents for environmental remediation. In addition, the CO{sub 2} adsorption behavior is well-described with the deactivation model. The species of CO{sub 2} formed on the sorbents are various carbonates, as revealed by in situ IR spectra as well as TGA. 24 refs., 4 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Fe3-xTixO4 Nanoparticles as Tunable Probes of Microbial Metal Oxidation

Present and emerging biotechnological applications for iron (oxyhydr)oxide nanomaterials depend on their interaction with microorganisms, as do their toxicity, transport, and fate in biological and environmental systems. However, mass or electron transfer along key molecular pathways at microbe-nanomaterial interfaces is extremely difficult to quantify because of system complexity. Inspired by Fe(II)-oxidizing microbes widespread in nature, we isolate and characterize one such pathway by examining the oxidation of Fe3-xTixO4 (magnetite-titanomagnetite) nanoparticles by the bacterial electron transfer enzyme MtoA, a decaheme c-type cytochrome. Oxidation by MtoA was studied as a function of the thermodynamic driving force for electron transfer by controlling the Ti(IV) doping content (x), which tunes the solid-state Fe(II)/Fe(III) ratio built into the nanoparticles. A higher Fe(II)/Fe(III) ratio appears to proportionally increase the electron transfer kinetics to the cytochrome. In situ x-ray diffraction indicated that during oxidation the spinel ferrite lattice remains intact while structural Fe(II) is progressively depleted. Surface and atomic site specific Fe L2,3-edge x-ray magnetic circular dichroism indicated that MtoA directly accesses magnetically-ordered B-sublattice Fe(II) at the interface. This study provides first quantitative insights into an isolated molecular pathway for biotransformation of iron (oxyhydr)oxide nanomaterials. And, more generally, it also illustrates new techniques for probing these pathways in detail, featuring use of tailored nanoparticles, purified metalloenzyme, and synchrotron x-ray absorption spectroscopies.

magnetite ∙ titanomagnetite ∙ microbial iron oxida↗