Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

SLUDGE BATCH 7 PREPARATION TANK 4 AND 12 CHARACTERIZATION

Samples of PUREX sludge from Tank 4 and HM sludge from Tank 12 were characterized in preparation for Sludge Batch 7 (SB7) formulation in Tank 51. SRNL analyses on Tank 4 and Tank 12 were requested in separate Technical Assistance Requests (TAR). The Tank 4 samples were pulled on January 19, 2010 following slurry operations by F-Tank Farm. The Tank 12 samples were pulled on February 9, 2010 following slurry operations by H-Tank Farm. At the Savannah River National Laboratory (SRNL), two 200 mL dip samples of Tank 4 and two 200 mL dip samples of Tank 12 were received in the SRNL Shielded Cells. Each tank's samples were composited into clean 500 mL polyethylene storage bottles and weighed. The composited Tank 4 sample was 428.27 g and the composited Tank 12 sample was 502.15 g. As expected there are distinct compositional differences between Tank 4 and Tank 12 sludges. The Tank 12 slurry is much higher in Al, Hg, Mn, and Th, and much lower in Fe, Ni, S, and U than the Tank 4 slurry. The Tank 4 sludge definitely makes the more significant contribution of S to any sludge batch blend. This S, like that observed during SB6 washing, is best monitored by looking at the total S measured by digesting the sample and analyzing by inductively coupled plasma - atomic emission spectroscopy (ICPAES). Alternatively, one can measure the soluble S by ICP-AES and adjust the value upward by approximately 15% to have a pretty good estimate of the total S in the slurry. Soluble sulfate measurements by ion chromatography (IC) will be biased considerably lower than the actual total S, the difference being due to the non-sulfate soluble S and the undissolved S. Tank 12 sludge is enriched in U-235, and hence samples transferred into SRNL from the Tank Farm will need to be placed on the reportable special nuclear material inventory and tracked for total U per SRNL procedure requirements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Structural analysis and functional evaluation of the disordered ß–hexosyltransferase region from Hamamotoa (Sporobolomyces) singularis

Hamamotoa (Sporobolomyces) singularis codes for an industrially important membrane bound ß-hexosyltransferase (BHT), (BglA, UniprotKB: Q564N5) that has applications in the production of natural fibers such as galacto-oligosaccharides (GOS) and natural sugars found in human milk. When heterologously expressed by Komagataella phaffii GS115, BHT is found both membrane bound and soluble secreted into the culture medium. In silico structural predictions and crystal structures support a glycosylated homodimeric enzyme and the presence of an intrinsically disordered region (IDR) with membrane binding potential within its novel N-terminal region (1–110 amino acids). Additional in silico analysis showed that the IDR may not be essential for stable homodimerization. Thus, we performed progressive deletion analyses targeting segments within the suspected disordered region, to determine the N-terminal disorder region’s impact on the ratio of membrane-bound to secreted soluble enzyme and its contribution to enzyme activity. The ratio of the soluble secreted to membrane-bound enzyme shifted from 40% to 53% after the disordered N-terminal region was completely removed, while the specific activity was unaffected. Furthermore, functional analysis of each glycosylation site found within the C-terminal domain revealed reduced total secreted protein activity by 58%–97% in both the presence and absence of the IDR, indicating that glycosylation at all four locations is required by the host for the secretion of active enzyme and independent of the removed disordered N-terminal region. Overall, the data provides evidence that the disordered region only partially influences the secretion and membrane localization of BHT.

59 BASIC BIOLOGICAL SCIENCES↗

Guiding Principles for Geochemical/Thermodynamic Model Development and Validation in Nuclear Waste Disposal: A Close Examination of Recent Thermodynamic Models for H + —Nd 3+ —NO 3 - (—Oxalate) Systems

Development of a defensible source-term model (STM), usually a thermodynamical model for radionuclide solubility calculations, is critical to a performance assessment (PA) of a geologic repository for nuclear waste disposal. Such a model is generally subjected to rigorous regulatory scrutiny. In this article, we highlight key guiding principles for STM model development and validation in nuclear waste management. We illustrate these principles by closely examining three recently developed thermodynamic models with the Pitzer formulism for aqueous H + —Nd 3+ —NO 3 - (—oxalate) systems in a reverse alphabetical order of the authors: the XW model developed by Xiong and Wang, the OWC model developed by Oakes et al., and the GLC model developed by Guignot et al., among which the XW model deals with trace activity coefficients for Nd(III), while the OWC and GLC models are for concentrated Nd(NO 3 ) 3 electrolyte solutions. The principles highlighted include the following: (1) Principle 1. Validation against independent experimental data: A model should be validated against experimental data or field observations that have not been used in the original model parameterization. We tested the XW model against multiple independent experimental data sets including electromotive force (EMF), solubility, water vapor, and water activity measurements. The results show that the XW model is accurate and valid for its intended use for predicting trace activity coefficients and therefore Nd solubility in repository environments. (2) Principle 2. Testing for relevant and sensitive variables: Solution pH is such a variable for an STM and easily acquirable. All three models are checked for their ability to predict pH conditions in Nd(NO 3 ) 3 electrolyte solutions. The OWC model fails to provide a reasonable estimate for solution pH conditions, thus casting serious doubt on its validity for a source-term calculation. In contrast, both the XW and GLC models predict close-to-neutral pH values, in agreement with experimental measurements. (3) Principle 3. Honoring physical constraints: Upon close examination, it is found that the Nd(III)-NO 3 association schema in the OWC model suffers from two shortcomings. Firstly, its second stepwise stability constant for Nd(NO 3 ) 2+ (log K 2 ) is much higher than the first stepwise stability constant for NdNO 3 2+ (log K 1 ), thus violating the general rule of (log K 2 –log K 1 ) < 0, or $\frac{K1}{K2}$>1. Secondly, the OWC model predicts abnormally high activity coefficients for Nd(NO 3 ) 2 + (up to ~900) as the concentration increases. (4) Principle 4. Minimizing degrees of freedom for model fitting: The OWC model with nine fitted parameters is compared with the GLC model with five fitted parameters, as both models apply to the concentrated region for Nd(NO 3 ) 3 electrolyte solutions. The latter appears superior to the former because the latter can fit osmotic coefficient data equally well with fewer model parameters. The work presented here thus illustrates the salient points of geochemical model development, selection, and validation in nuclear waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Fluorescence-Based Aqueous Phosphate Sensing Using Eu(cpboda)(DMF) 2

Fluorescence-based phosphate sensing using phosphate-sensitive phosphors is a promising approach for in situ monitoring of phosphate pollution in waterways and reservoirs. To date, the most sensitive phosphor developed for this purpose is Tb(cpboda)(DMF) 2 , where cpboda = (3,3'-((5-Carboxy-1,3-phenylene)bis(oxy))dibenzoic acid). In this study, we further improve this sensitivity by replacing the Tb 3+ ions with Eu 3+ ions to make Eu(cpboda)(DMF) 2 and find concentration-independent phosphate-sensitivity of 1570 ± 120, which is ≈8× more sensitive than the Tb-version. This improvement is attributed to Eu 3+ having a hypersensitive transition, while Tb 3+ does not. Additionally, we characterize the phosphor’s optical properties, photodegradation, and water solubility. We find that the phosphor presents challenges with regards to both photodegradation and solubility, as it is found to be poorly soluble in water and is quickly photodegraded under UV radiation <360 nm. However, these obstacles can, in theory, be overcome with the use of direct excitation of the Eu 3+ ions at 394 nm and careful design of an analysis instrument to reduce concentration variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of prepreg graphite tape with insoluble polymer

Powdered polymer is finely ground. Second polymer, soluble, is mixed with appropriate solvent. Milled polymer and graphite filaments are added to soluble polymer-solvent solution to create slurry. Slurry is dried, and when ready for processing, the soluble, binder-polymer is removed by heat during precure or cure cycle.

Yates, C. I.↗

Analysis of liquid metal embrittlement from a bond energy viewpoint

Absorption induced embrittlement of solid metals by certain liquid metals is analyzed through an Engel-Brewer calculation of the solid-liquid interaction energy, and of the effect of the latter in reducing fracture surface energy. The reduction in fracture surface energy is estimated by comparison of the electronic contribution to the solid-liquid interaction energy with solid-solid bond energy for some 40 liquid-solid couples. Regular solution theory is used to estimate mutual solubility as the relative difference in parameter values. Embrittlement can be predicted by using reduction in fracture surface energy and solubility parameter difference as critical variables. The effect of solute additions to the liquid on the degree of embrittlement is interpreted via the same two variables; the principal effect of solutes is to modify solubility relationships at the solid-liquid interface.

Kelley, M. J.↗

A simple approach to metal hydride alloy optimization

Certain metals and related alloys can combine with hydrogen in a reversible fashion, so that on being heated, they release a portion of the gas. Such materials may find application in the large scale storage of hydrogen. Metal and alloys which show high dissociation pressure at low temperatures, and low endothermic heat of dissociation, and are therefore desirable for hydrogen storage, give values of the Hildebrand-Scott solubility parameter that lie between 100-118 Hildebrands, (Ref. 1), close to that of dissociated hydrogen. All of the less practical storage systems give much lower values of the solubility parameter. By using the Hildebrand solubility parameter as a criterion, and applying the mixing rule to combinations of known alloys and solid solutions, correlations are made to optimize alloy compositions and maximize hydrogen storage capacity.

Lawson, D. D.↗

Objective appraisal of tolerance to ventriculography with various radiocontrast media (according to electronystagmography data)

The vestibulo oculomotor reflex (nystagmus) was recorded by means of electronystagmography in 33 neurosurgical patients in dynamics prior to and after ventriculography. For contrasting the ventricular system a water soluble medium (Conrey, dimer X or Amipak) was used in 18 patients and contrast mixtures of water soluble agents in combination with Myodil emulsion in 15. It was established that after ventriculography with water soluble media the trunk vestibular reactions in all types of nystagmus grew frequently and sharply and the vestibulovegetative reactions increased markedly.

Blagoveshchenskaya, N. S.↗

Making a Lightweight Battery Plaque

Plaque formed in porous plastic by electroless plating. Lightweight plaque prepared by electroless plating of porous plastic contains embedded wire or expanded metal grid. Plastic may or may not be filled with soluble pore former. If it contains soluble pore former, treated to remove soluble pore former and increase porosity. Porous plastic then clamped into rig that allows plating solutions to flow through plastic. Lightweight nickel plaque used as electrode substrate for alkaline batteries, chiefly Ni and Cd electrodes, and for use as electrolyte-reservoir plates for fuel cells.

Reid, M. A.↗

Volatile solubities in magmas - Transport of volatiles from mantles to planet surfaces

The solubility of CO2, CO, CH4, H2, and H2O in melts of NaAlSi3O8 composition was measured at the mantle conditions of pressure (10-20 Kb) and temperature (1200 C). The melt volatiles were found to have dramatically lower H2/H2O and higher CO/CO2 ratios than the fluid, due to large variations in relative solubilities of volatile species in the melt. Partial melting of source regions of either high or low oxygen fugacity (fO2) will result in magmas with intermediate fO2. This means that volcanic gases can be either more, or less reducing than their source regions and that a volcanic gas composition cannot be used to directly estimate either the fO2 or the volatile composition of the source region. The results suggest that volcanic gases will usually lie in the 'neutral' range, with the fO2 values near those of the quartz-fayalite-magnetite buffer. These gases are predominately H2O with minor CO2, CO, CH4, and H2. These conclusions should apply to earth, Mars, and Venus mantles, in which the magmas produced by partial melting have moderate silica contents, but will probably not apply to very low silica magmas, such as kimberlites, because of the very high solubility of CO2 in those magmas.

Holloway, J. R.↗

Protein crystal growth in low gravity

The solubility and growth mechanism of canavalin were studied, and the applicability of the Schlieren technique to protein crystal growth was investigated. Canavalin which may be crystallized from a basic solution by the addition of hydrogen (H+) ions was shown to have normal solubility characteristics over the range of temperatures (5 to 25 C) and pH (5 to 7.5) studied. The solubility data combined with growth rate data gathered from the seeded growth of canavalin crystals indicated that the growth mechanism at high supersaturation ratios (>1.28) is screw dislocation like. A Schlieren apparatus was constructed and flow patterns were observed in Rochelle salt (sodium potassium tartrate), lysozyme, and canavalin. The critical parameters were identified as the change in density with concentration (dp/dc) and the change in index of refraction with concentration (dn/dc). Some of these values were measured for the materials listed.

Feigelson, Robert S.↗

Acid dew and the role of chemistry in the dry deposition of reactive gases to wetted surfaces

A formalism is developed to describe the dry deposition of soluble reactive gases to wetted surfaces in terms of the relevant meteorological conditions, the surface roughness, the total amount of liquid water present on the surface, the rate of accumulation of this water, and the species' solubility and reactivity in the surface water. This formulation is then incorporated into a model designed to simulate the generation of acidic dew from the deposition of HNO3, SO2, S(IV) oxidants, H2O2, and O3. Similar to the observations of dew in the continental U.S., the model generates a dewdrop pH of about 4 by the end of the night; the pH can rapidly fall to toxic levels due to rapid evaporation after sunrise. Relatively low deposition velocities are predicted for the SO2 and O3 because of their lower solubilities and hence larger surface resistances than those of the other oxidants. Because the chemical lifetime of the SO2 in the dew is influenced by the atmospheric levels of H2O2, O3, and SO2, the SO2 deposition velocity is a strong function of these species' atmospheric abundances.

Chameides, William L.↗

Choosing Compositions Of Electrocatalysts

Simple theory predicts compositions of alloys that exhibit maximum catalytic activities in presence of certain reactants. Method used to select best catalysts for electrochemical batteries and fuel cells. Oxygen-electrode overvoltage plotted against solubility parameter of lead/platinum electrode in acidic and basic solutions. Electrode formed by plating mixtures of lead and platinum, corresponding to various solubility parameters. Method based on one used to analyze activities of nonelectrical catalysts in reactions involving hydrogen or oxygen. Rate of such reaction increases when solubility parameter of catalyst matches reactant.

Lawson, Daniel D.↗

Protein crystal growth in low gravity

The solubility and growth of the protein canavalin, and the application of the schlieren technique to study fluid flow in protein crystal growth systems were investigated. These studies have resulted in the proposal of a model to describe protein crystal growth and the preliminary plans for a long-term space flight experiment. Canavalin, which may be crystallized from a basic solution by the addition of hydrogen (H+) ions, was shown to have normal solubility characteristics over the range of temperatures (5 to 25 C) and pH (5 to 7.5) studies. The solubility data combined with growth rate data gathered from the seeded growth of canavalin crystals indicated that the growth rate limiting step is a screw dislocation mechanism. A schlieren apparatus was constructed and flow patterns were observed in Rochelle salt (sodium potassium tartrate), lysozyme, and canavalin. The critical parameters were identified as the change in density with concentration (dp/dc) and the change in index of refraction with concentration (dn/dc). Some of these values were measured for the materials listed. The data for lyrozyme showed non-linearities in plots of optical properties and density vs. concentration. In conjunction with with W. A. Tiller, a model based on colloid stability theory was proposed to describe protein crystallization. The model was used to explain observations made by ourselves and others. The results of this research has lead to the development for a preliminary design for a long-term, low-g experiment. The proposed apparatus is univeral and capable of operation under microprocessor control.

Feigelson, Robert S.↗

Development of new techniques for the characterization of crystals and their growth solutions: Center director's discretionary fund

The solubility measurement system and the laser scattering microscope system were designed, built, and utilized for the study of crystal growth solutions and crystal characterization measurements. Solubility measurements and crystal defect maps were made with this equipment for a number of new materials. In some cases, where there have been published solubility data (i.e., TGS), more accurate measurements were made and discrepancies in the published data were resolved. The design of these instruments is presented along with a description of their use and some typical data generated using them.

Kroes, Roger L.↗

Model simulations of rainout and washout from a warm stratiform cloud

Calculations utilizing a one-dimensional, time-dependent stratiform cloud model with parameterized microphysics to study the washout and rainout of soluble trace gases are presented. It is shown that the in-cloud concentrations of relatively insoluble species remain essentially unaffected by the presence of cloudwater and rainwater, while the concentrations of highly soluble species are rapidly depleted within the cloud. Due to this depletion it is shown that for highly soluble species the below-cloud scavenging via washout can dominate over in-cloud scavenging via rainout; in-cloud, aqueous-phase cloudwater and rainwater concentrations can differ considerably and, near the cloudbase, cloudwater concentrations can exceed rainwater concentrations by factors of two to ten.

Xing, Lin↗

Physical properties of cryovolcanic brines: Applications to the evolution of Ganymede

Carbonaceous chondrites contain abundant veins of water soluble salts, including carbonates and hydrated sulfates of Mg, Ca, Na, Ni, and Fe. These constitute over 1/4 of the mass of the meteorite Orgueil. Magnesium sulfate is the most abundant salt, constituting nearly half the mass of all salt components combined (anhydrous), and 73 pct. of the highly water soluble salts. The assumption that icy satellites and asteroids contain rock compositionally similar to carbonaceous chondrites suggests that salts may be important in the cryoigneous evolution of icy satellites and asteroids. Ordinary chondrites, an alternative rock component of icy satellites, lack abundant salts, although their anhydrous silicate assemblages are unstable with respect to water and would react to produce salts upon initial melting of ice. Some basic physiochemical properties are reviewed of likely cryovolcanic brines and how the existence of soluble salts in Ganymede might affect its structure and evolution is considered. Observations indicate late stage (post heavy bombardment and post tectonic) volcanism on Ganymede. The highly fluid character of Ganymedian volcanism is consistent with extrusions of either water or salt water brines.

Kargel, Jeffrey S.↗

Breadboard activities for advanced protein crystal growth

The proposed work entails the design, assembly, testing, and delivery of a turn-key system for the semi-automated determination of protein solubilities as a function of temperature. The system will utilize optical scintillation as a means of detecting and monitoring nucleation and crystallite growth during temperature lowering (or raising, with retrograde solubility systems). The deliverables of this contract are: (1) turn-key scintillation system for the semi-automatic determination of protein solubilities as a function of temperature, (2) instructions and software package for the operation of the scintillation system, and (3) one semi-annual and one final report including the test results obtained for ovostatin with the above scintillation system.

Rosenberger, Franz↗