Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Site Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Simplest Monodentate Imidazole Stabilization of the oxy‐Tyrosinase Cu 2 O 2 Core: Phenolate Hydroxylation through a Cu III Intermediate

Abstract Tyrosinases are ubiquitous binuclear copper enzymes that oxygenate to Cu II 2 O 2 cores bonded by three histidine Nτ‐imidazoles per Cu center. Synthetic monodentate imidazole‐bonded Cu II 2 O 2 species self‐assemble in a near quantitative manner at −125 °C, but Nπ‐ligation has been required. Herein, we disclose the syntheses and reactivity of three Nτ‐imidazole bonded Cu II 2 O 2 species at solution temperatures of −145 °C, which was achieved using a eutectic mixture of THF and 2‐MeTHF. The addition of anionic phenolates affords a Cu III 2 O 2 species, where the bonded phenolates hydroxylate to catecholates in high yields. Similar Cu III 2 O 2 intermediates are not observed using Nπ‐bonded Cu II 2 O 2 species, hinting that Nτ‐imidazole ligation, conserved in all characterized Ty, has functional advantage beyond active‐site flexibility. Substrate accessibility to the oxygenated Cu 2 O 2 core and stabilization of a high oxidation state of the copper centers are suggested from these minimalistic models.

Chiang, Linus↗

Adding to the Arsenal of Zirconium‐Based Metal–Organic Frameworks: the Topology as a Platform for Solvent‐Assisted Metal Incorporation

Gaining control over the assembly of mesoporous Zr‐based metal–organic frameworks (MOFs) with modifiable metal nodes remains a challenge. The the topology is intriguing, particularly if considering postsynthetic modification, as it presents large sodalite‐like cages surrounded by 12 interconnected 1D channels that allow for efficient diffusion of guest molecules throughout the structure. Herein, we demonstrate the first Zr MOF with the topology, NU‐1200, which was synthesized by controlling the geometry of the organic building unit. In addition, by using NU‐1200 as a platform, we perform solvent‐assisted metal incorporation to form single‐site metalated nodes, a process that is characterized by single‐crystal X‐ray diffraction.

Liu, Tian‐Fu↗

Restructuring and integrity of molecular catalysts in electrochemical CO 2 reduction

Electrocatalysts that start a reaction as molecules do not always end the reaction as molecules, and even when they do, they might not be molecules during catalysis. In this Perspective, we discuss knowledge learned from the study of Cu-based molecularly structured electrocatalysts––including metal coordination complexes, metal-organic frameworks, single-atom catalysts, and polymeric materials––that restructure under electrochemical CO 2 reduction reactions. Recent reports are summarized with an emphasis on the nature and significance of post-mortem and in situ characterization for the proper identification of active sites. We demonstrate that molecular and material structures determine whether electrocatalysts restructure and how they restructure, that understanding of restructuring processes can help us identify active sites for catalysis, and that this knowledge can be leveraged to design precatalysts that generate highly active catalysts under reaction conditions. In addition, we provide recommended practices for studying the integrity of heterogeneous molecular catalysts during and after CO 2 reduction reactions.

CO2 reduction↗

Bismuth iron titanate pyrochlores: Thermostability, structure and properties

Iron containing bismuth titanates with pyrochlore structure Bi{sub 1.6}Fe{sub x}Ti{sub 2}O{sub 7−δ}, where 0.08≤x≤0.4, were obtained by ceramic procedure. The results of bough pycnometric density of the pyrochlores and of X-ray powder diffraction structure refinement points to the preference for iron atoms to occupy the Bi{sup 3+}-sites. Electric and magnetic properties were studied for single phase pyrochlores based on bismuth titanates. The magnetic ordering was studied by the methods of Mössbauer spectroscopy and magnetic susceptibility. - Graphical abstract: The ideal crystal structure of pyrochlore A{sub 2}B{sub 2}O{sub 6}O' (A—Bi{sup 3+}, Fe{sup 3+}; B—Ti{sup 4+}, Fe{sup 3+}). Highlights: • Bismuth titanate pyrochlores stable over a wide temperature range were obtained. • The distribution of Fe{sup 3+} over various sites was determined. • The obtained systems were characterized by magnetic susceptibility, Mössbauer spectroscopy and conductivity.

36 MATERIALS SCIENCE↗

Friction stir spot welding of hot-stamped boron steel

Hot-stamped, boron steel was successfully joined via friction stir spot welding using polycrystalline cubic boron nitride tooling. The resulting microstructure, microhardness and mechanical properties are reported, including a brief look into failure mechanisms. Relationships between the unique mechanical mixing, phase transformations and failure initiation sites associated with joining martensitic steels are characterized.

boron steel↗

Examinations of Oxidation and Sulfidation of Grain Boundaries in Alloy 600 Exposed to Simulated Pressurized Water Reactor Primary Water

High-resolution characterizations of intergranular attack in alloy 600 (Ni-17Cr-9Fe) exposed to 325 °C simulated pressurized water reactor (PWR) primary water have been conducted using a combination of scanning electron microscopy, NanoSIMS, analytical transmission electron microscopy and atom probe tomography. The intergranular attack exhibited a two-stage microstructure that consisted of continuous corrosion/oxidation to a depth of ~200 nm from the surface followed by discrete Cr-rich sulfides to a further depth of ~500 nm. The continuous oxidation region contained primarily nanocrystalline MO-structure oxide particles and ended at Ni-rich, Cr-depleted grain boundaries with spaced CrS precipitates. Three-dimensional characterization of the sulfidized region using site-specific atom probe tomography revealed extraordinary grain boundary composition changes, including total depletion of Cr across a several nm wide dealloyed zone as a result of grain boundary migration.

36 MATERIALS SCIENCE↗

An integrated workflow for characterizing intact phosphoproteins from complex mixtures

The phosphorylation of any site on a given protein can affect its activity, degradation rate, ability to dock with other proteins or bind divalent cations, and/or its localization. These effects can operate within the same protein; in fact, multisite phosphorylation is a key mechanism for achieving signal integration in cells. Hence, knowing the overall phosphorylation signature of a protein is essential for understanding the "state" of a cell. However, current technologies to monitor the phosphorylation status of proteins are inefficient at determining the relative stoichiometries of phosphorylation at multiple sites. Here we report a new capability for comprehensive liquid chromatography-mass spectrometry (LC-MS) analysis of intact phosphoproteins. The technology platform built upon integrated bottom-up and top-down approach that is facilitated by intact protein reversed-phase (RP)LC concurrently coupled with Fourier transform ion cyclotron resonance (FTICR) MS and fraction collection.

59 BASIC BIOLOGICAL SCIENCES↗

First-Principles Investigation of Electrides Derived from Sodalites

Recently, electride materials, with excess anionic electrons confined in their empty space, have received growing attention due to their promising applications in catalysis, nonlinear optics, and spin electronics. However, the utilization of electride materials is limited by their thermal instability. Here, we introduce an alternative way to achieve the localized anionic electron states via the removal of highly symmetric Wyckoff sites of anions from the existing sodalite compounds. Using four halide sodalites as the parental structures, our simulation reveals that the materials after the removal of anionic halide sites exhibit typical electride behaviors that are characterized by the existence of localized electronic states near the Fermi level. Compared to most previously studied electrides, these materials are expected to be more thermally stable due to the complex structural framework and thus promising for practical applications. Among them, Na 4 (AlSiO 4 ) 3 manifests magnetic electronic structure. We demonstrate that this magnetism originates from a highly localized excess electron state surrounded by electropositive alkaline cations. Here, our results suggest Na 4 (AlSiO 4 ) 3 could be a promising spintronics component, thus encouraging further experimental study.

36 MATERIALS SCIENCE↗

Reducing Coke and Increasing Bio-Oil Yield during Catalytic Fast Pyrolysis of Biomass Using Phosphorus-Modified Zeolite Catalysts

Catalytic fast pyrolysis (CFP) is a promising strategy for producing hydrocarbon transportation fuels from biomass feedstocks. However, catalyst development is needed to increase bio-oil yields and enhance process economics. In this work, we demonstrate how post synthetic modification of formed ZSM-5 with phosphorus shifts CFP selectivity from coke and light gases toward the desired bio-oil product. Microscale experiments demonstrated reduced coke production relative to unmodified ZSM-5 and identified an optimal P loading. Extensive catalyst characterization revealed that P interacted with Al sites to reduce the acid site density, with preferential binding to the strongest acid sites. Insights from the microscale experiments were leveraged to produce kilogram quantities of formed P-ZSM-5 for evaluation in a larger semi-integrated process. These experiments generated liters of bio-oil that was hydrotreated and fractionated into gasoline, diesel, and jet cuts. The phosphorus-modified ZSM-5 improved CFP bio-oil yield, resulting in an 11% relative increase in the carbon yield from biomass to aviation fuel and a 14% decrease in the minimum fuel selling price. These results highlight the impact targeted changes in catalyst acidity, achieved by adding 2.5 wt % P, can have on the carbon efficiency and feasibility of fuel production from biomass feedstocks.

09 BIOMASS FUELS↗

Kβ X-ray Emission Spectroscopy of Cu(I)-Lytic Polysaccharide Monooxygenase: Direct Observation of the Frontier Molecular Orbital for H 2 O 2 Activation

Lytic polysaccharide monooxygenases (LPMOs) catalyze the degradation of recalcitrant carbohydrate polysaccharide substrates. These enzymes are characterized by a mononuclear Cu(I) active site with a three-coordinate T-shaped “His-brace” configuration including the N-terminal histidine and its amine group as ligands. Here, this study explicitly investigates the electronic structure of the d 10 Cu(I) active site in a LPMO using Kβ X-ray emission spectroscopy (XES). The lack of inversion symmetry in the His-brace site enables the 3d/p mixing required for intensity in the Kβ valence-to-core (VtC) XES spectrum of Cu(I)-LPMO. These Kβ XES data are correlated to density functional theory (DFT) calculations to define the bonding, and in particular, the frontier molecular orbital (FMO) of the Cu(I) site. These experimentally validated DFT calculations are used to evaluate the reaction coordinate for homolytic cleavage of the H 2 O 2 O–O bond and understand the contribution of this FMO to the low barrier of this reaction and how the geometric and electronic structure of the Cu(I)-LPMO site is activated for rapid reactivity with H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore size effects on the sorption of supercritical carbon dioxide in mesoporous CPG-10 silica

Excess sorption isotherms of supercritical carbon dioxide in mesoporous CPG-10 silica glasses with nominal pore sizes of 75 (7.5 nm) and 350 (35 nm) were measured gravimetrically at 35 C and 50 C and pressures of 0-200 bar. Formation of broad maxima in the excess sorption was observed at fluid densities below the bulk critical density. Positive values of excess sorption were measured at bulk densities below about 0.65-0.7 g/cm3, whereas zero and negative values were obtained at higher densities, indicating that the interfacial fluid becomes less dense than the corresponding bulk fluid at high fluid densities. A shift of the excess sorption peak position to higher fluid density is found with increasing pore width. The excess sorption of CO2 normalized to the specific surface area is higher for the 35 nm pore size material, suggesting pore confinement effects. Conversely, the pore volume normalized excess sorption is higher for the 7.5 nm pore size material. Assessment of mean pore density reveals regions of constant pore fluid density, located between the excess sorption peak and the adsorption/depletion transition. Both materials exhibit such regions of constant mean pore fluid density as a function of bulk CO2 density at the lower temperature of 35 C, but not at 50 C. The results of this study suggest that the CO2 storage capacity in quartz-rich reservoirs is higher for sites with low temperature and rock textures characterized by narrow pores with high surface to volume ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction of nitric oxide by acetylene on Ir surfaces with different morphologies: Comparison with reduction of NO by CO

Reduction of nitric oxide (NO) by acetylene (C 2 H 2 ) has been investigated by temperature-programmed desorption (TPD) on planar Ir(210) and faceted Ir(210) with tunable sizes of three-sided nanopyramids exposing (311), (311), and (110) faces. Upon adsorption, C 2 H 2 dissociates to form acetylide (CCH) and H species on the Ir surfaces at low C 2 H 2 precoverage. For adsorption of NO on C 2 H 2 -covered Ir, both planar and faceted Ir(210) exhibit high reactivity for reduction of NO with high selectivity to N 2 at low C 2 H 2 precoverage, although the reaction is completely inhibited at high C 2 H 2 precoverage. Coadsorbed C 2 H 2 significantly influences dissociation of NO. The N-, H-, and C-containing TPD products are dominated by N 2 , H 2 , CO, and CO 2 together with small amounts of H 2 O. For adsorption of NO on C-covered Ir(210) at fractional C precoverage, formation of CO 2 is promoted while production of CO is reduced. Reduction of NO by C 2 H 2 is structure sensitive on faceted Ir(210) versus planar Ir(210), but no evidence is found for size effects in the reduction of NO by C 2 H 2 on faceted Ir(210) for average facet sizes of 5 nm and 14 nm. The results are compared with reduction of NO by CO on the same Ir surfaces. As for NO+C 2 H 2 , the Ir surfaces are very active for reduction of NO by CO with high selectivity to N 2 and the reaction is structure sensitive, but dear evidence is found for size effects in the reduction of NO by CO on the nanometer scale. Furthermore, coadsorbed CO does not affect dissociation of NO at low CO precoverage whereas coadsorbed CO considerably influences dissociation of NO at high CO precoverage. Finally, the adsorption sites of CCH+H on Jr are characterized by density functional theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NMR longitudinal relaxation enhancement in metal halides by heteronuclear polarization exchange during magic-angle spinning

Orders of magnitude decrease of {sup 207}Pb and {sup 199}Hg NMR longitudinal relaxation times T{sub 1} upon magic-angle-spinning (MAS) are observed and systematically investigated in solid lead and mercury halides MeX{sub 2} (Me = Pb, Hg and X = Cl, Br, I). In lead(II) halides, the most dramatic decrease of T{sub 1} relative to that in a static sample is in PbI{sub 2}, while it is smaller but still significant in PbBr{sub 2}, and not detectable in PbCl{sub 2}. The effect is magnetic-field dependent but independent of the spinning speed in the range 200–15 000 Hz. The observed relaxation enhancement is explained by laboratory-frame heteronuclear polarization exchange due to crossing between energy levels of spin-1/2 metal nuclei and adjacent quadrupolar-spin halogen nuclei. The enhancement effect is also present in lead-containing organometal halide perovskites. Our results demonstrate that in affected samples, it is the relaxation data recorded under non-spinning conditions that characterize the local properties at the metal sites. A practical advantage of fast relaxation at slow MAS is that spectral shapes with orientational chemical shift anisotropy information well retained can be acquired within a shorter experimental time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolutionary convergence in lignin-degrading enzymes

The resurrection of ancestral enzymes of now-extinct organisms (paleogenetics) is a developing field that allows the study of evolutionary hypotheses otherwise impossible to be tested. In the present study, we target fungal peroxidases that play a key role in lignin degradation, an essential process in the carbon cycle and often a limiting step in biobased industries. Ligninolytic peroxidases are secreted by wood-rotting fungi, the origin of which was recently established in the Carboniferous period associated with the appearance of these enzymes. These first peroxidases were not able to degrade lignin directly and used diffusible metal cations to attack its phenolic moiety. The phylogenetic analysis of the peroxidases of Polyporales, the order in which most extant wood-rotting fungi are included, suggests that later in evolution these enzymes would have acquired the ability to degrade nonphenolic lignin using a tryptophanyl radical interacting with the bulky polymer at the surface of the enzyme. Here, we track this powerful strategy for lignin degradation as a phenotypic trait in fungi and show that it is not an isolated event in the evolution of Polyporales. Using ancestral enzyme resurrection, we study the molecular changes that led to the appearance of the same surface oxidation site in two distant peroxidase lineages. By characterization of the resurrected enzymes, we demonstrate convergent evolution at the amino acid level during the evolution of these fungi and track the different changes leading to phylogenetically distant ligninolytic peroxidases from ancestors lacking the ability to degrade nonphenolic lignin.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization and Structural Studies of the Plasmodium falciparum Ubiquitin and Nedd8 Hydrolase UCHL3

Like their human hosts, Plasmodium falciparum parasites rely on the ubiquitin-proteasome system for survival. We previously identified PfUCHL3, a deubiquitinating enzyme, and here we characterize its activity and changes in active site architecture upon binding to ubiquitin. We find strong evidence that PfUCHL3 is essential to parasite survival. The crystal structures of both PfUCHL3 alone and in complex with the ubiquitin-based suicide substrate UbVME suggest a rather rigid active site crossover loop that likely plays a role in restricting the size of ubiquitin adduct substrates. Molecular dynamics simulations of the structures and a model of the PfUCHL3-PfNedd8 complex allowed the identification of shared key interactions of ubiquitin and PfNedd8 with PfUCHL3, explaining the dual specificity of this enzyme. Distinct differences observed in ubiquitin binding between PfUCHL3 and its human counterpart make it likely that the parasitic DUB can be selectively targeted while leaving the human enzyme unaffected.

36 MATERIALS SCIENCE↗

Hydropower Evaluation Framework for Wildfire Resilient Microgrids

This paper presents a framework for characterizing hydropower plants based on plant and site attributes, assessing their feasibility to function within microgrids during periods of wildfire-induced outages. A set of nine metrics is developed to assign scores to hydropower plants, considering their suitability for forming wildfire-resilient microgrids, their capability to operate within such microgrids, and their simulated performance during wildfire events. A comprehensive database is constructed, comparing hydropower plants according to their suitability and capability metrics. To evaluate the performance score of a specific hydropower plant, namely the Hills Creek plant situated in a wildfire-prone region of Oregon, a case study is conducted, simulating a wildfire scenario. The results of steady-state and dynamic simulations demonstrate that the Hills Creek hydropower plant can effectively provide crucial microgrid services and power nearby communities during a prolonged wildfire-related outages.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Growth of Cd 0.9 Zn 0.1 Te 1-y Se y Single Crystals for Room Temperature Gamma-Ray Detection

Quaternary Cd 0.9 Zn 0.1 Te 1-y Sey (CZTS) single crystals, a novel room-temperature nuclear radiation detector semiconductor material, have been grown using a modified vertical Bridgman method (VBM) and a travelling heater method (THM). The percentage concentration of selenium in the VBM-grown crystal was 3% and that in the THM-grown crystal was 2%. While the THM Frisch collar detector (4.4 × 4.4 × 10.7 mm 3 ) produced a highly resolved pulse height spectra (PHS) with a resolution of ~1.06% for 662-keV gamma rays without any correction, the VBM-grown detector (10 × 10 × 2 mm 3 ) offered a high energy resolution of ~2% after application of a digital biparametric correction. The high-resolution performance of these detectors has been attributed to the addition of Se in the Cd 0.9 Zn 0.1 Te (CZT) matrix. Ab-initio calculations based on density functional theory (DFT) also confirmed that the addition of Se in the CZT matrix helps to reduce the formation of TeCd and the TeZn anti-sites. The VBM-grown crystals were characterized using powder x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS). While XRD results revealed sharp diffraction peaks confirming the crystalline nature of the grown crystal, the EDS results confirmed the targeted stoichiometry of the elemental composition. The bulk resistivity of the grown crystal was calculated to be ~3 × 10 10 Ω-cm from current-voltage characteristics recorded at room temperature in a planar configuration, ensuring that the grown CZTS crystals have low dark current as required for detector-grade crystals.

42 ENGINEERING↗