Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOLIDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Towards the Commercialization of the All-Solid-State Li-ion Battery: Local Bonding Structure and the Reversibility of Sheet-Style Si-PAN Anodes

A slurry-coated sheet-style Si-based anode is developed for use in all-solid-state Li-ion batteries. Inexpensive, mixed-conducting polyacrylonitrile (PAN) is utilized as both binder and conductive additive, enabling Si-rich electrodes (70 wt%) to attain large reversible capacities ~1,500 mAh g-1 (Si) at 1 C rates (>3 mA cm -2 ). Cross sectional analysis of a discharged all-solid-state half-cell indicates that the Si-PAN anode achieves the largest volumetric specific capacity ever reported for a Li-ion electrode (>1500 mAh cm -3 ). Ex situ Raman spectroscopic studies reveal that the anodes' reversibility is attributed to the preservation of small tetrahedrally coordinated clusters within their Si nanoparticles upon discharge. We therefore argue that careful lithiation limitations should be implemented in all Si-based Li-ion anodes to preserve this local tetrahedral atomic structure. Furthermore, the slurry-coated sheet-style Si-PAN anodes have been successfully cycled in all-solid-state full-cells against high-voltage nickel-rich NMC 811 composite cathodes to encourage future commercialization of similar sheet-style all-solid-state designs.

25 ENERGY STORAGE↗

Mechano-Electrochemical Interaction in Solid-State Lithium Batteries

A solid-state lithium (Li) battery primarily consists of Li metal anode, solid electrolyte separator, and cathode. The asymmetric volume changes, originating from ion transport and interfacial Li growth during plating, lead to significant stresses in the layered architecture. In this study, we develop a coupled mechanics-electrochemistry formalism for polymer electrolyte based solid-state batteries, in particular, focusing on the stress effect on electrochemical performance. By means of a coupling coefficient, it is found that stress-assisted ion transport in the electrolyte results in a delayed Sand’s time and increased critical current density of unstable electrodeposition, and consequently, alleviates the propensity of dendrite formation. Stress at the Li metal-electrolyte interface affects the electrochemical reaction kinetics, and the influences from the deviatoric stress and hydrostatic pressure vary with Li plating time. In addition, a low restraint stiffness to the layered structure could elastically buffer the volumetric changes and thus reduce the stress during Li plating. This fundamental study provides guidance for the design of solid-state batteries, aimed at stable electrodeposition and mechanical integrity.

25 ENERGY STORAGE↗

Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Lithium-ion Battery Models using Symmetric Polynomials: Mass Conservation and Computational Efficiency

Lithium-ion batteries are typically modeled using porous electrode theory coupled with various transport and reaction mechanisms, along with suitable discretization or approximations for the solid-phase diffusion equation. The solid-phase diffusion equation represents the main computational burden for typical pseudo-2-dimensional (p2D) models since these equations in the pseudo r -dimension must be solved at each point in the computational grid. This substantially increases the complexity of the model as well as the computational time. Traditional approaches towards simplifying solid-phase diffusion possess certain significant limitations, especially in modeling emerging electrode materials which involve phase changes and variable diffusivities. A computationally efficient representation for solid-phase diffusion is discussed in this paper based on symmetric polynomials using Orthogonal Collocation and Galerkin formulation (weak form). A systematic approach is provided to increase the accuracy of the approximation (p form in finite element methods) to enable efficient simulation with a minimal number of semi-discretized equations, ensuring mass conservation even for non-linear diffusion problems involving variable diffusivities. These methods are then demonstrated by incorporation into the full p2D model, illustrating their advantages in simulating high C-rates and short-time dynamic operation of Lithium-ion batteries.

25 ENERGY STORAGE↗

Stable Lithium Plating in “Lithium Metal-Free” Solid-State Batteries Enabled by Seeded Lithium Nucleation

In the “Li 0 -free” architecture, cells are manufactured with a bare anode current collector and the Li metal anode is plated in situ during the first charging step. While this architecture has many attractive qualities from manufacturing and energy density perspectives, stable Li plating in solid-state “Li 0 -free” cells can be challenging. It is generally accepted that the Li overpotential affects Li homogeneity in “Li 0 -free” cells. We demonstrate that the nucleation overpotential for Li plating in solid-state “Li 0 -free” cells using commercial current collectors can be eliminated by introducing metal clusters that guide Li nucleation. Au is used as model alloying metal cluster. Here, we demonstrate stable Li plating with thickness 16.5 μ m (3.3 mAh cm −2 ) in oxide solid-state electrolyte “Li 0 -free” cells enabled by Au metal clusters. It is shown that 97% of the in situ plated Li can be reversibly stripped at 60 °C and 2.5 MPa. Conversely, Au interlayers which are flat and continuous instead of clustered in morphology consistently showed short-circuiting during in situ Li plating, limiting Li electrodeposition to <0.1 mAh cm −2 . These results can help guide future studies of Li nucleation and growth at solid/solid interfaces, as well as offer alternative manufacturing pathways for “Li 0 -free” solid-state batteries.

25 ENERGY STORAGE↗

Transition from Vogel-Fulcher-Tammann to Arrhenius Ion-Conducting Behavior in Poly(Ethyl Acrylate)-Based Solid Polymer Electrolytes via Succinonitrile Plasticizer Addition

Solid polymer electrolytes (SPEs) offer potential advantages over liquid electrolytes, including flexibility, safety, and processability. However, they suffer from low room-temperature ionic conductivity. Recently, it has been reported a poly(ethyl acrylate) based (polyEA) SPE, by incorporating 50 wt% of succinonitrile (SN) solid plasticizer, 30 wt% of lithium salt and 5 wt% of fluoroethylene carbonate additive, which achieves a high room-temperature ionic conductivity of 1.01 × 10 −3 S cm −1 (Nat. Nanotechnol, 2022, 17, 768-776). This novel SPE exhibits stability against Li 0 and anodic stability up to 4.9 V vs Li + /Li. However, the specific mechanism responsible for its high ionic conductivity remains elusive. In this work, by adjusting the weight ratio of SN in the SPE, a transition from Vogel-Fulcher-Tammann to Arrhenius ion-conducting behavior is observed. It is demonstrated that the addition of SN leads to the gradual decoupling of Li-ion from the polymer backbone and its coordination with SN, as revealed by 6 Li solid-state nuclear magnetic resonance spectroscopy. As a result, Li-ion migration primarily occurs through SN rather than the segmental motion of the polymer backbone. Performances of the SPE in Cu||Li, Li||Li and a LiFePO 4 ||Li pouch cells are shown to demonstrate the commercial viability of this SPE in Li 0 -anode solid-state batteries.

Electrochemistry↗

Fundamental Relationship of Microstructure and Ionic Conductivity of Amorphous LLTO as Solid Electrolyte Material

All-solid-state Li-ion batteries (ASSLiB) attracted lots of attention mainly due to their higher safety compared with commercial Li-ion batteries. The research of solid electrolyte is critical for the development of ASSLiB, and among all the candidates of solid electrolyte materials, amorphous Lithium Lanthanum Titanate Oxide (LLTO) is promising because of its outstanding electrochemical stability up to 12V. However, the fundamental relationship among the ionic conductivity, microstructure, and mechanism of Li ion transport is still unrevealed. In this study, both amorphous LLTO thin film and LLTO powder were successfully prepared by sol-gel process. In order to determine the relationship between microstructure and ionic conductivity, various annealing time at 500°C were applied. This work shows that the ionic conductivity increases from 2.32 × 10 -8 S/cm to 9.01 × 10 -6 S/cm with the annealing time before LLTO starts to crystallize and decreases back to ~1.6 × 10 -9 S/cm after the formation of crystal phase. The absolute value of difference is close to 3 orders of magnitude. Furthermore, the morphology of the thin film changes accordingly, solvent evaporation, surface refinement and crystallization phases would occur sequentially, and this indicates that there is an optimal synthesis condition for the LLTO film. However, the changes of structure, morphology and ionic conductivity does not affect activation energy. This will help researchers to find optimized synthesis condition of amorphous LLTO and potentially search for and design other solid electrolyte materials.

25 ENERGY STORAGE↗

Supercooling of Hydrogen on Template Materials to Deterministically Seed Ignition-Quality Solid Fuel Layers

In this study, we explored templating effects of various materials for hydrogen (H 2 and D 2 ) solidification by measuring the degree of supercooling required for liquid hydrogen to solidify below each triple point. The results show high supercooling (>100 mK) for most metallic, covalent, and ionic solids, and low supercooling (<100 mK) for van der Waals (vdW) solids. We attribute the low supercooling of vdW solids to the weak interaction of the substrate and hydrogen. Highly ordered pyrolytic graphite showed the lowest supercooling among materials that are solid at room temperature, but did not exhibit a templating effect within a fill-tube and capsule assembly.

36 MATERIALS SCIENCE↗

Characterization of nanostructured organic-inorganic hybrid materials using advanced solid-state NMR spectroscopy

We demonstrate the applications of several novel techniques in solid-state nuclear magnetic resonance spectroscopy (SSNMR) to the structural studies of mesoporous organic-inorganic hybrid catalytic materials. Most of these latest capabilities of solid-state NMR were made possible by combining fast magic angle spinning (at {ge} 40 kHz) with new multiple RF pulse sequences. Remarkable gains in sensitivity have been achieved in heteronuclear correlation (HETCOR) spectroscopy through the detection of high-{gamma} ({sup 1}H) rather than low-{gamma} (e.g., {sup 13}C, {sup 15}N) nuclei. This so-called indirect detection technique can yield through-space 2D {sup 13}C-{sup 1}H HETCOR spectra of surface species under natural abundance within minutes, a result that earlier has been out of reach. The {sup 15}N-{sup 1}H correlation spectra of species bound to a surface can now be acquired, also without isotope enrichment. The first indirectly detected through-bond 2D {sup 13}C-{sup 1}H spectra of solid samples are shown, as well. In the case of 1D and 2D {sup 29}Si NMR, the possibility of generating multiple Carr-Purcell-Meiboom-Gill (CPMG) echoes during data acquisition offered time savings by a factor of ten to one hundred. Examples of the studied materials involve mesoporous silica and mixed oxide nanoparticles functionalized with various types of organic groups, where solid-state NMR provides the definitive characterization.

36 MATERIALS SCIENCE↗

In operando neutron imaging characterizations of all-solid-state batteries

The surge in electric vehicle demand has propagated the extensive application of lithium-ion batteries (LIBs) in recent years. Gaining significant traction due to their promising high-energy density and elevated safety over traditional LIBs, all-solid-state Li batteries (ASLBs) have nonetheless been faced with hurdles relating to battery performance. These include concerns with interfacial compatibility, structural stability, Li dendrite inhibition, and large-scale manufacturing. To tackle these issues, it is necessary to employ advanced characterization methods to comprehend the intrinsic mechanisms within ASLBs. In this article, we advocate for the use of neutron imaging as a nondestructive approach for the operando visualization of ASLBs. We draw comparisons with other operando visualization strategies, underline the benefits of neutron imaging, and discuss its potential applicability in the scrutiny of all-solid-state Li metal batteries and all-solid-state Li-sulfur batteries. Neutron imaging provides valuable insights into the dynamics of Li concentration, reaction mechanisms, and transport constraints in ASLBs. These insights are pivotal in contributing to the evolution of high-performance all-solid-state batteries.

25 ENERGY STORAGE↗

High-pressure phase transitions of Fe 3-x Ti x O 4 solid solution up to 60 GPa correlated with electronic spin transition

The structural phase transition of the titanomagnetite (Fe 3–x Ti x O 4 ) solid solution under pressures up to 60 GPa has been clarified by single-crystal and powder diffraction studies using synchrotron radiation and a diamond-anvil cell. Present Rietveld structure refinements of the solid solution prove that the prefered cation distribution is based on the crystal field preference rather than the magnetic spin ordering in the solid solution. The Ti-rich phases in 0.734 ≤ x ≤1.0 undergo a phase transformation from the cubic spinel of Fd3m to the tetragonal spinel structure of I4 1 /amd with c/a < 1.0. The transition is driven by a Jahn-Teller effect of IV Fe 2+ (3d 6 ) on the tetrahedral site. The c/a < 1 ratio is induced by lifting of the degeneracy of the e orbitals by raising the d x2-y2 orbital below the energy of the d z2 orbital. The distortion characterized by c/a < 1 is more pronounced with increasing Ti content in the Fe 3–x Ti x O 4 solid solutions and with increasing pressure. An X-ray emission experiment of Fe 2 TiO 4 at high pressures confirms the spin transition of FeKβ from high spin to intermediate spin (IS) state. The high spin (HS)-to-low spin (LS) transition starts at 14 GPa and the IS state gradually increases with compression. The VI Fe 2+ in the octahedral site is more prone for the HS-to-LS transition, compared with Fe 2+ in the fourfold- or eightfold-coordinated site. The transition to the orthorhombic post-spinel structure with space group Cmcm has been confirmed in the whole compositional range of Fe 3–x Ti x O 4 . The transition pressure decreases from 25 GPa (x = 0.0) to 15 GPa (x = 1.0) with increasing Ti content. There are two cation sites in the orthorhombic phase: M1 and M2 sites of eightfold and sixfold coordination, respectively. Fe 2+ and Ti 4+ are disordered on the M2 site. This structural change is accelerated at higher pressures due to the spin transition of Fe 2+ in the octahedral site. This is because the ionic radius of VI Fe 2+ becomes 20% shortened by the spin transition. At 53 GPa, the structure transforms to another high-pressure polymorph with Pmma symmetry with the ordered structure of Ti and Fe atoms in the octahedral site. This structure change results from the order-disorder transition.

Yamanaka, Takamitsu↗

Effects of Time, Heat, and Oxygen on K Basin Sludge Agglomeration, Strength, and Solids Volume

Sludge disposition will be managed in two phases under the K Basin Sludge Treatment Project. The first phase is to retrieve the sludge that currently resides in engineered containers in the K West (KW) Basin pool at ~10 to 18°C. The second phase is to retrieve the sludge from interim storage in the sludge transport and storage containers (STSCs) and treat and package it in preparation for eventual shipment to the Waste Isolation Pilot Plant. The work described in this report was conducted to gain insight into how sludge may change during long-term containerized storage in the STSCs. To accelerate potential physical and chemical changes, the tests were performed at temperatures and oxygen partial pressures significantly greater than those expected in the T Plant canyon cells where the STSCs will be stored. Tests were conducted to determine the effects of 50°C oxygenated water exposure on settled quiescent uraninite (UO2) slurry and a full simulant of KW containerized sludge to determine the effects of oxygen and heat on the composition and mechanical properties of sludge. Shear-strength measurements by vane rheometry also were conducted for UO2 slurry, mixtures of UO2 and metaschoepite (UO3•2H2O), and for simulated KW containerized sludge. The results from these tests and related previous tests are compared to determine whether the settled solids in the K Basin sludge materials change in volume because of oxidation of UO2 by dissolved atmospheric oxygen to form metaschoepite. The test results also are compared to determine if heating or other factors alter sludge volumes and to determine the effects of sludge composition and settling times on sludge shear strength. It has been estimated that the sludge volume will increase with time because of a uranium metal → uraninite → metaschoepite oxidation sequence. This increase could increase the number of containers required for storage and increase overall costs of sludge management activities. However, the volume might decrease because of decreases in the water-volume fraction caused by sludge solid reactions, compaction, or intergrowth and recrystallization of metaschoepite. In that case, fewer STSCs may be needed, but the shear strength would increase, and this could challenge recovery by water jet erosion and require more aggressive retrieval methods. Overall, the tests described herein indicate that the settled solids volume remains the same or decreases with time. The only case for which the sludge solids volumes increase with time is for the expansion factor attendant upon the anoxic corrosion of uranium metal to produce UO2 and subsequent reaction with oxygen to form equimolar UO2.25 and UO3•2H2O.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

SOLID PHASE CHARACTERIZATION OF HEEL SAMPLES FROM TANK 241-C-110

During sluicing operations of tank 241-C-110, a significant amount of solids were unable to be retrieved. These solids (often referred to as the tank 'heel') were sampled in 2010 and chemically and mineralogically analyzed in the 222-S Laboratory. Additionally, dissolution tests were performed to identify the amount of undissolvable material after using multiple water contacts. This report covers the solid phase characterization of six samples from these tests using scanning electron microscopy, polarized light microscopy, and X-ray diffraction. The chemical analyses, particle size distribution analysis, and dissolution test results are reported separately. Two of the samples were from composites created from as-received material - Composite A and Composite B. The main phase in these samples was sodium-fluoride-phosphate hydrate (natrophosphate) - in the X-ray diffraction spectra, this phase was the only phase identifiable. Polarized light microscopy showed the presence of minor amounts of gibbsite and other phases. These phases were identified by scanning electron microscopy - energy dispersive X-ray spectroscopy as sodium aluminosilicates, sodium diuranate, and sodium strontium phosphate hydrate (nastrophite) crystals. The natrophosphate crystals in the scanning electron microscopy analysis showed a variety of erosive and dissolution features from perfectly shaped octahedral to well-rounded appearance. Two samples were from water-washed Composites A and B, with no change in mineralogy compared to the as-received samples. This is not surprising, since the water wash had only a short period of water contact with the material as opposed to the water dissolution tests. The last two samples were residual solids from the water dissolution tests. These tests included multiple additions of water at 15 C and 45 C. The samples were sieved to separate a coarser fraction of > 710 {mu}m and a finer fraction of < 710 {mu}m. These two fractions were analyzed separately. The coarser fraction contained mostly gibbsite with minor amounts of sodium aluminosilicates (cancrinite) and bismuth aluminum-rich phases. The finer fraction was mostly composed of gibbsite, the sodium alumino silicate phase, cancrinite, and a poorly crystalline to non-crystalline phase containing varying amounts of iron, bismuth, aluminum, and phosphorus.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

An Invariant-Preserving ALE Method for Solids under Extreme Conditions

We are proposing a fundamentally new approach to ALE methods for solids undergoing large deformation due to extreme loading conditions. Our approach is based on a physically-motivated and mathematically rigorous construction of the underlying Lagrangian method, vector/tensor reconstruction, remapping, and interface reconstruction. It is transformational because it deviates dramatically from traditionally accepted ALE methods and provides the following set of unique attributes: (1) a three-dimensional, finite volume, cell-centered ALE framework with advanced hypo-/hyper-elasto-plastic constitutive theories for solids; (2) a new physically and mathematically consistent reconstruction method for vector/tensor fields; (3) advanced invariant-preserving remapping algorithm for vector/tensor quantities; (4) moment-of-fluid (MoF) interface reconstruction technique for multi-material problems with solids undergoing large deformations. This work brings together many new concepts, that in combination with emergent cell-centered Lagrangian hydrodynamics methods will produce a cutting-edge ALE capability and define a new state-of-the-art. Many ideas in this work are new, completely unexplored, and hence high risk. The proposed research and the resulting algorithms will be of immediate use in Eulerian, Lagrangian and ALE codes under the ASC program at the lab. In addition, the research on invariant preserving reconstruction/remap of tensor quantities is of direct interest to ongoing CASL and climate modeling efforts at LANL. The application space impacted by this work includes Inertial Confinement Fusion (ICF), Z-pinch, munition-target interactions, geological impact dynamics, shock processing of powders and shaped charges. The ALE framework will also provide a suitable test-bed for rapid development and assessment of hypo-/hyper-elasto-plastic constitutive theories. Today, there are no invariant-preserving ALE algorithms for treating solids with large deformations. Therefore, this is a high-impact effort that will significantly advance the state of ALE methods and position LANL as world leaders in advanced ALE methods.

42 ENGINEERING↗

Test Plan - Solids Accumulation Scouting Studies

This plan documents the highlights of the Solids Accumulations Scouting Studies test; a project, from Washington River Protection Solutions (WRPS), that began on February 1, 2012. During the last 12 weeks considerable progress has been made to design and plan methods that will be used to estimate the concentration and distribution of heavy fissile solids in accumulated solids in the Hanford double-shell tank (DST) 241-AW-105 (AW-105), which is the primary goal of this task. This DST will be one of the several waste feed delivery staging tanks designated to feed the Pretreatment Facility (PTF) of the Waste Treatment and Immobilization Plant (WTP). Note that over the length of the waste feed delivery mission AW-105 is currently identified as having the most fill empty cycles of any DST feed tanks, which is the reason for modeling this particular tank. At SRNL an existing test facility, the Mixing Demonstration Tank, which will be modified for the present work, will use stainless steel particles in a simulant that represents Hanford waste to perform mock staging tanks transfers that will allow solids to accumulate in the tank heel. The concentration and location of the mock fissile particles will be measured in these scoping studies to produce information that will be used to better plan larger scaled tests. Included in these studies is a secondary goal of developing measurement methods to accomplish the primary goal. These methods will be evaluated for use in the larger scale experiments. Included in this plan are the several pretest activities that will validate the measurement techniques that are currently in various phases of construction. Aspects of each technique, e.g., particle separations, volume determinations, topographical mapping, and core sampling, have been tested in bench-top trials, as discussed herein, but the actual equipment to be employed during the full test will need evaluation after fabrication and integration into the test facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Results of Characterization and Retrieval Testing on Tank 241-C-109 Heel Solids

Eight samples of heel solids from tank 241-C-109 were delivered to the 222-S Laboratory for characterization and dissolution testing. After being drained thoroughly, one-half to two-thirds of the solids were off-white to tan solids that, visually, were fairly evenly graded in size from coarse silt (30-60 μm) to medium pebbles (8-16 mm). The remaining solids were mostly strongly cemented aggregates ranging from coarse pebbles (16-32 mm) to fine cobbles (6-15 cm) in size.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Uncertainty quantification tools for multiphase gas-solid flow simulations using MFIX

Computational fluid dynamics (CFD) has been widely studied and used in the scientific community and in the industry. Various models were proposed to solve problems in different areas. However, all models deviate from reality. Uncertainty quantification (UQ) process evaluates the overall uncertainties associated with the prediction of quantities of interest. In particular it studies the propagation of input uncertainties to the outputs of the models so that confidence intervals can be provided for the simulation results. In the present work, a non-intrusive quadrature-based uncertainty quantification (QBUQ) approach is proposed. The probability distribution function (PDF) of the system response can be then reconstructed using extended quadrature method of moments (EQMOM) and extended conditional quadrature method of moments (ECQMOM). The report first explains the theory of QBUQ approach, including methods to generate samples for problems with single or multiple uncertain input parameters, low order statistics, and required number of samples. Then methods for univariate PDF reconstruction (EQMOM) and multivariate PDF reconstruction (ECQMOM) are explained. The implementation of QBUQ approach into the open-source CFD code MFIX is discussed next. At last, QBUQ approach is demonstrated in several applications. The method is first applied to two examples: a developing flow in a channel with uncertain viscosity, and an oblique shock problem with uncertain upstream Mach number. The error in the prediction of the moment response is studied as a function of the number of samples, and the accuracy of the moments required to reconstruct the PDF of the system response is discussed. The QBUQ approach is then demonstrated by considering a bubbling fluidized bed as example application. The mean particle size is assumed to be the uncertain input parameter. The system is simulated with a standard two-fluid model with kinetic theory closures for the particulate phase implemented into MFIX. The effect of uncertainty on the disperse-phase volume fraction, on the phase velocities and on the pressure drop inside the fluidized bed are examined, and the reconstructed PDFs are provided for the three quantities studied. Then the approach is applied to a bubbling fluidized bed with two uncertain parameters, particle-particle and particle-wall restitution coefficients. Contour plots of the mean and standard deviation of solid volume fraction, solid phase velocities and gas pressure are provided. The PDFs of the response are reconstructed using EQMOM with appropriate kernel density functions. The simulation results are compared to experimental data provided by the 2013 NETL small-scale challenge problem. Lastly, the proposed procedure is demonstrated by considering a riser of a circulating fluidized bed as an example application. The mean particle size is considered to be the uncertain input parameter. Contour plots of the mean and standard deviation of solid volume fraction, solid phase velocities, and granular temperature are provided. Mean values and confidence intervals of the quantities of interest are compared to the experiment results. The univariate and bivariate PDF reconstructions of the system response are performed using EQMOM and ECQMOM.

97 MATHEMATICS AND COMPUTING↗

Thermophysical properties of BKC 44306 and BKC 44307 PMDI urethane solid and foams

Accurate knowledge of thermophysical properties of urethane foam is considered extremely important for meaningful models and analyses to be developed of scenarios wherein the foam is heated. Its performance at temperature requires a solid understanding of the foam material properties at temperature. Also, foam properties vary with density/porosity. An experimental program to determine the thermal properties of the two foams and their parent solid urethane was developed in order to support development of a predictive model relating density and thermal properties from first principles. Thermal properties (thermal conductivity, diffusivity, and specific heat) of the foam were found to vary with temperatures from 26°C to 90°C. Thermal conductivity generally increases with increasing temperature for a given initial density and ranges from .0433 W/mK at 26°C to .0811 W/mK at 90°C; thermal diffusivity generally decreases with increasing temperature for a given initial density and ranges from .4101 mm 2 /s at 26°C to .1263 mm 2 /s at 90°C; and specific heat generally increases with increasing temperature for a given initial density and ranges from .1078 MJ/m 3 K at 26°C to .6323 MJ/m 3 K at 90°C. Thermal properties of the solid urethane were also found to vary with temperatures from 26°C to 90°C. Average thermal conductivity generally increases with increasing temperature for a given initial density and ranges from 0.126 to 0.131 W/mK at 26°C to 0.153 to 0.157 W/mK at 90°C; average thermal diffusivity generally decreases with increasing temperature for a given initial density and ranges from 0.142 to 0.147 mm 2 /s at 26°C to 0.124 to 0.125 mm 2 /s at 90°C; and average specific heat generally increases with increasing temperature for a given initial density and ranges from 0.889 to 0.899 MJ/m 3 K to 1.229 to 1.274 MJ/m 3 K at 90°C. The density of both foam and solid urethane decreased with increasing temperature.

36 MATERIALS SCIENCE↗

Solid-State Powered X-band Accelerator

In this report we disseminate the hot test results of an X-band 100-W solid state amplifier chain for linear accelerator (linac) applications. Solid state power amplifiers have become increasingly attractive solutions for achieving high power in radar and maritime applications. Here the performance of solid state amplifiers when driving an RF cavity is investigated. Commercially available, matched and fully-packaged GaN on SiC HEMTs are utilized, comprising a wideband driver stage and two power stages. The amplifier chain has a high poweradded- efficiency and is able to supply up to ~1.2 MV/m field gradient at 9.2 GHz in a simple test cavity, with a peak power exceeding 100 W. These findings set forth the enabling technology for solid-state powered linacs.

47 OTHER INSTRUMENTATION↗