Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCREEN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Hydrocarbon concentrations in fire toxicity tests as an indication of flash fire propensity

The concentrations of hydrocarbons in the gases from fire toxicity tests are often determined to obtain an indication of their contribution to toxic effects and of the mechanisms of thermal decomposition. Because the gas compositions produced in the University of San Francisco/NASA toxicity screening test are generated under identical pyrolysis conditions, they offer the potential of comparing the flash-fire propensity of various materials.

Hilado, C. J.↗

Sigma/deg/ signature of the Amazon rain forest obtained from the Seasat scatterometer

Scatterometer data from Seasat of the Amazon rain forest were examined to determine if the region is suitable to use as a reference for calibration of radars. The consistency of Skylab data viewing the Amazon region prompted the analyses, and the Seasat-A scatterometer system (SASS) gathered data of the same region at varying angles. The instrument employed a 100 W 14.6 GHz signal with the reflected power sampled 61 times during each 1.89 sec measurement period. Doppler filters were used in 15 parallel channels of reception, and represented areas 20 km by 50-70 km. Tests were made of regional and temporal stability of the Amazon area, with five measurement angles averaged at different incidence angles to find the mean deviation, which was found to be less than 0.5 dB. Diurnal effects were confined to early morning, and further tests are recommended to obtain results for an entire year, to develop screening methods for thick clouds and rain, and to determine the deviation more precisely.

Birrer, I. J.↗

Evaluation of turbulence induced noise in coherent anti-Stokes Raman scattering

The effect of turbulence in a transonic wind tunnel on coherent anti-Stokes Raman scattering is considered. The driving pump and Stokes waves are taken to be coaxially propagating Gaussian beam waves which are focused on the Raman active medium through the turbulent boundary layer of the flow tube. The random index of refraction variations in the layer are modeled as phase perturbations of the driving waves which cause a reduction of the mean on-axis field and an increase in the mean diameter of the beams. Effective Gaussian beam parameters are developed and the radiated anti-Stokes power calculated as a function of the phase screen parameters. A significant reduction in signal strength occurs for realistic estimates of the phase screen parameter appropriate to a confined transonic flow. A method for estimating the signal degradation which could be applied to other experimental situations is presented.

Elliott, R. A.↗

Warm Pressurant Gas Effects on the Liquid Hydrogen Bubble Point

This paper presents experimental results for the liquid hydrogen bubble point tests using warm pressurant gases conducted at the Cryogenic Components Cell 7 facility at the NASA Glenn Research Center in Cleveland, Ohio. The purpose of the test series was to determine the effect of elevating the temperature of the pressurant gas on the performance of a liquid acquisition device. Three fine mesh screen samples (325 x 2300, 450 x 2750, 510 x 3600) were tested in liquid hydrogen using cold and warm noncondensible (gaseous helium) and condensable (gaseous hydrogen) pressurization schemes. Gases were conditioned from 0 to 90 K above the liquid temperature. Results clearly indicate a degradation in bubble point pressure using warm gas, with a greater reduction in performance using condensable over noncondensible pressurization. Degradation in the bubble point pressure is inversely proportional to screen porosity, as the coarsest mesh demonstrated the highest degradation. Results here have implication on both pressurization and LAD system design for all future cryogenic propulsion systems. A detailed review of historical heated gas tests is also presented for comparison to current results.

Liquid Hydrogen↗

Nearly a Decade of CALIPSO Observations of Asian and Saharan Dust Properties Near Source and Transport Regions

The lidar on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission, makes robust measurements of dust and has generated a length of record that is significant both seasonally and inter-annually. We exploit this record to determine a multi-year climatology of the properties of Asian and Saharan dust, in particular seasonal optical depths, layer frequencies, and layer heights of dust gridded in accordance with the Level 3 data products protocol, between 2006-2015. The data are screened using standard CALIPSO quality assurance flags, cloud aerosol discrimination (CAD) scores, overlying features and layer properties. To evaluate the effects of transport on the morphology, vertical extent and size of the dust layers, we compare probability distribution functions of the layer integrated volume depolarization ratios, geometric depths and integrated attenuated color ratios near the source to the same distributions in the far field or transport region. CALIPSO is collaboration between NASA and Centre National D'études Spatiales (CNES), was launched in April 2006 to provide vertically resolved measurements of cloud and aerosol distributions. The primary instrument on the CALIPSO satellite is the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), a near-nadir viewing two-wavelength polarization-sensitive instrument. The unique nature of CALIOP measurements make it quite challenging to validate backscatter profiles, aerosol type, and cloud phase, all of which are used to retrieve extinction and optical depth. To evaluate the uncertainty in the lidar ratios, we compare the values computed from dust layers overlying opaque water clouds, considered nominal, with the constant lidar ratio value used in the CALIOP algorithms for dust. We also explore the effects of noise on the CALIOP retrievals at daytime by comparing the distributions of the properties at daytime to the nighttime distributions.

Omar, Ali H.↗

Metrics in Space Life Support Technology Selection

Engineering metrics are useful in space life support technology selection, but they must be carefully used. Metrics are only part of a complete system trade-off. Metrics do harm if they cause neglect of other important technical, organizational, or intuitive decision factors. Two metrics have damaged space life support, closure and Equivalent Systems Mass (ESM). Closure measures the fraction of the required system inputs that are produced by recycling system outputs. Increasing closure produces diminishing returns and becomes increasingly expensive. Increasing closure does not directly contribute to providing better life support. ESM measures the total launch mass required to provide life support. ESM includes the mass of the system hardware and of its power, cooling, pressurized volume, spares, and logistics. ESM predicts launch costs, but recently launch costs have been reduced by a factor of 20 or more. System development cost for space hardware is often much greater than launch cost. The past nearly exclusive use of ESM has led to the neglect of Life Cycle Cost (LCC), reliability, cost, and the other engineering factors. Closure and ESM have misguided space life support technology selection for more than twenty years and have adversely affected the expenditure of 100’s of millions of dollars. Metrics can be effectively used three ways in space life support technology selection: 1. A small set of key engineering metrics for preliminary screening. 2. A full set of engineering to guide technical selection. 3. Combining engineering metrics with organizational, political, and intuitive decision factors to understand technology selection. The past emphasis on closure and ESM served to support recycling life support over resupply and built on the intuitive appeal of a human ecosystem in space.

Harry W Jones↗

The Effective Use of Metrics in Space Life Support System Trade-Offs

Engineering metrics are useful in space life support technology selection, but they must be carefully used. Metrics are only part of a complete system trade-off. Metrics do harm if they cause neglect of other important technical, organizational, or intuitive decision factors. Two metrics have damaged space life support, closure and Equivalent Systems Mass (ESM). Closure measures the fraction of the required system inputs that are produced by recycling system outputs. Increasing closure produces diminishing returns and becomes increasingly expensive. Increasing closure does not directly contribute to providing better life support. ESM measures the total launch mass required to provide life support. ESM includes the mass of the system hardware and of its power, cooling, pressurized volume, spares, and logistics. ESM predicts launch costs, but recently launch costs have been reduced by a factor of 20 or more. System development cost for space hardware is often much greater than launch cost. The past nearly exclusive use of ESM has led to the neglect of Life Cycle Cost (LCC), reliability, cost, and the other engineering factors. Closure and ESM have misguided space life support technology selection for more than twenty years and have adversely affected the expenditure of 100’s of millions of dollars. Metrics can be effectively used three ways in space life support technology selection: 1. A small set of key engineering metrics for preliminary screening. 2. A full set of engineering to guide technical selection. 3. Combining engineering metrics with organizational, political, and intuitive decision factors to understand technology selection. The past emphasis on closure and ESM served to support recycling life support over resupply and built on the intuitive appeal of a human ecosystem in space.

Harry W. Jones↗

RECOMMENDATIONS FOR UO3 PLANT BIOASSAY

Alternative urine bioassay programs are described for application with decontamination and decommissioning activities at the Hanford UO3 Plant. The alternatives are based on quarterly or monthly urine bioassay for recycled uranium, assuming multiple acute inhalation intakes of recycled uranium occurring over a year. The inhalations are assumed to be 5µm AMAD particles of 80% absorption type F and 20% absorption type M. Screening levels, expressed as daily uranium mass excretion rates in urine, and the actions associated with these levels are provided for both quarterly and monthly sampling frequencies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

THE EXTENT OF MAGNETIC FIELDS AROUND GALAXIES OUT TO z {approx} 1

Radio quasar sightlines with strong Mg II absorption lines display statistically enhanced Faraday rotation measures (RMs), indicating the presence of additional magneto-active plasma with respect to sightlines free of such absorption. In this Letter, we use multi-color optical imaging to identify the galaxies likely hosting the magneto-active plasma, and to constrain the location of the latter with respect to the putative parent halo. We find that all of the sightlines with high |RM| pass within 50 kpc of a galaxy and that the |RM| distribution for low impact parameters, D < 50 kpc, is significantly different than for larger impact parameters. In addition, we find a decrease in the ratio of the polarization at 21 cm and 1.5 cm, p{sub 21}/p{sub 1.5}, toward lower D. These two effects are most likely related, strengthen the association of excess |RM| with intervening galaxies, and suggest that intervening galaxies operate as inhomogeneous Faraday screens. These results are difficult to reconcile with only a disk model for the magnetic field, but are consistent with highly magnetized winds associated with Mg II systems. We infer strong magnetic fields of a few tens of {mu}G, consistent with the values required by the lack of evolution of the FIR-radio correlation at high redshifts. Finally, these findings lend support to the idea that the small-scale helicity bottleneck of {alpha}-{Omega} galactic dynamos can be significantly alleviated via galactic winds.

79 ASTRONOMY AND ASTROPHYSICS↗

A high-throughput method for assessing chemical toxicity using a Caenorhabditis elegans reproduction assay

The National Research Council has outlined the need for non-mammalian toxicological models to test the potential health effects of a large number of chemicals while also reducing the use of traditional animal models. The nematode Caenorhabditis elegans is an attractive alternative model because of its well-characterized and evolutionarily conserved biology, low cost, and ability to be used in high-throughput screening. A high-throughput method is described for quantifying the reproductive capacity of C. elegans exposed to chemicals for 48 h from the last larval stage (L4) to adulthood using a COPAS Biosort. Initially, the effects of exposure conditions that could influence reproduction were defined. Concentrations of DMSO vehicle {<=} 1% did not affect reproduction. Previous studies indicated that C. elegans may be influenced by exposure to low pH conditions. At pHs greater than 4.5, C. elegans reproduction was not affected; however below this pH there was a significant decrease in the number of offspring. Cadmium chloride was chosen as a model toxicant to verify that automated measurements were comparable to those of traditional observational studies. EC{sub 50} values for cadmium for automated measurements (176-192 {mu}M) were comparable to those previously reported for a 72-h exposure using manual counting (151 {mu}M). The toxicity of seven test toxicants on C. elegans reproduction was highly correlative with rodent lethality suggesting that this assay may be useful in predicting the potential toxicity of chemicals in other organisms.

60 APPLIED LIFE SCIENCES↗

Time-dependent behavioral data from zebrafish reveals novel signatures of chemical toxicity using point of departure analysis

High-content imaging of embryonic zebrafish behavior can be used as a screening approach to rapidly evaluate the relative potential for chemicals to cause toxicity. However, most statistical methods applied to these data so far transform movement values to incidence-based “hits” and calculate lowest effect levels (LELs), which loses individual fish resolution of behavior and defies hazard ranking due to reliance on applied dose levels. Here, we have developed and parallelized a workflow to calculate benchmark dose (BMD) values from dynamic, high-content zebrafish behavior data that scales for high-throughput chemical screening. To appropriately capture the dynamics of zebrafish response from light to dark stimulus, we summarized time-dependent data using both area under the curve and immediate change at the transition point into two novel metrics that characterized abnormal behavior as a function of chemical concentration. The BMD workflow was applied to calculate BMD 10 values of 1,060 ToxCast chemicals for 24 zebrafish endpoints, including behavior, mortality and morphology. The BMD 10 values provided better precision and separation than LELs for clustering chemicals since they were derived from models that best-fit their concentration-response curves. Clustering analysis revealed behavioral signatures as the most sensitive endpoints. High concordance in chemical activity was observed between ToxCast assays and zebrafish behavioral endpoints, however ToxPi analysis indicated that rankings based on in vitro data was not a reliable predictor of in vivo rankings for lower potency chemicals. The methods developed in this work will enable the use of high-content zebrafish behavioral screening data for BMD analysis in toxicological hazard assessment.

59 BASIC BIOLOGICAL SCIENCES↗

Sensitivity of F-106B Leading-Edge-Vortex Images to Flight and Vapor-Screen Parameters

A flight test was undertaken at NASA Langley Research Center with vapor-screen and image-enhancement techniques to obtain qualitative and quantitative information about near-field vortex flows above the wings of fighter aircraft. In particular, the effects of Reynolds and Mach numbers on the vortex system over an angle-of-attack range were sought. The relevance of these flows stems from their present and future use at many points in the flight envelope, especially during transonic maneuvers. The aircraft used in this flight program was the F-106B because it was available and had sufficient wing sweep (60 deg) to generate a significant leading-edge vortex system. The sensitivity of the visual results to vapor screen hardware and to onset flow changes is discussed.

Lamar, John E.↗

Energy relaxation of hot electrons in Si-doped GaN

Energy relaxation of the hot electrons in Si-doped bulk GaN is studied theoretically, taking into account non-equilibrium polar optical phonons, electron degeneracy, and screening from the mobile electrons. The electron power dissipation and energy relaxation time are calculated as functions of the electron temperature T{sub e}, the hot-phonon effect (HPE) is examined by varying the optical phonon lifetime values, and the results are compared with previous calculations for typical GaN-based heterostructures. Particular attention is paid to the distinct temperature T{sub e} dependences of the power loss and the energy relaxation time τ{sub E} at the low and high electron temperatures. At low electron temperatures (T{sub e}<500 K), the exponential rise of phonon generation number, fast weakened screening and HPE result in a rapid increase of power loss and sharp drop of relaxation time with T{sub e}. At high electron temperatures (T{sub e}>1500 K), the power loss increases slowly with T{sub e} due to the decrease in phonon generation rate, and the temperature-dependence of the energy relaxation time depends on the polar optical phonon lifetime—saturation in energy relaxation occurs when the phonon lifetime increases or varies little with T{sub e}. Our calculated temperature dependences of the energy relaxation time are in good agreement with experimental findings [Liberis et al., Appl. Phys. Lett. 89, 202117 (2006); Matulionis et al., Phys. Status Solidi C 2, 2585 (2005)]. With no HPE, the electron energy relaxation is much faster in bulk GaN (τ{sub E}∼ several tens femtoseconds) than in the GaN-based heterostructures. However, stronger hot-phonon re-absorption occurs in bulk GaN due to rapid polar-optical phonon emission compared to phonon decay. Therefore, including HPE yields very close power loss and energy relaxation times in bulk and heterostructures with similar densities of electrons (τ{sub E}∼ several tenths of a picosecond). Transparent expressions for energy relaxation are obtained in the Boltzmann approximation, which are very useful for resolving the temperature dependences of the energy relaxation in the low- and high-T{sub e} regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Massively parallel, computationally guided design of a proenzyme

Proteins have shown promise as therapeutics and diagnostics, but their effectiveness is limited by our inability to spatially target their activity. To overcome this limitation, we developed a computationally guided method to design inactive proenzymes or zymogens, which are activated through cleavage by a protease. Since proteases are differentially expressed in various tissues and disease states, including cancer, these proenzymes could be targeted to the desired microenvironment. We tested our method on the therapeutically relevant protein carboxypeptidase G2 (CPG2). We designed Pro-CPG2s that are inhibited by 80 to 98% and are partially to fully reactivatable following protease treatment. The developed methodology, with further refinements, could pave the way for routinely designing protease-activated protein-based therapeutics and diagnostics that act in a spatially controlled manner. Confining the activity of a designed protein to a specific microenvironment would have broad-ranging applications, such as enabling cell type-specific therapeutic action by enzymes while avoiding off-target effects. While many natural enzymes are synthesized as inactive zymogens that can be activated by proteolysis, it has been challenging to redesign any chosen enzyme to be similarly stimulus responsive. Here, we develop a massively parallel computational design, screening, and next-generation sequencing-based approach for proenzyme design. For a model system, we employ carboxypeptidase G2 (CPG2), a clinically approved enzyme that has applications in both the treatment of cancer and controlling drug toxicity. Detailed kinetic characterization of the most effectively designed variants shows that they are inhibited by ∼80% compared to the unmodified protein, and their activity is fully restored following incubation with site-specific proteases. Introducing disulfide bonds between the pro- and catalytic domains based on the design models increases the degree of inhibition to 98% but decreases the degree of restoration of activity by proteolysis. A selected disulfide-containing proenzyme exhibits significantly lower activity relative to the fully activated enzyme when evaluated in cell culture. Structural and thermodynamic characterization provides detailed insights into the prodomain binding and inhibition mechanisms. The described methodology is general and could enable the design of a variety of proproteins with precise spatial regulation.

59 BASIC BIOLOGICAL SCIENCES↗

Concepts for a Deuterium–Deuterium Fusion Reactor

We revisit the assumption that reactors based on deuterium–deuterium (D–D) fusion process have to be necessarily developed after the successful completion of experiments and demonstrations for deuterium–tritium (D–T) fusion reactors. Two possible mechanisms for enhancing the reactivity are discussed. Hard tails in the energy distribution of the nuclei, through the so-called κ-distribution, allow to boost the number of energetic nuclei available for fusion reactions. At higher temperatures than usually considered in D–T plasmas, vacuum polarization effects from real e{sup +}e{sup –} and μ{sup +}μ{sup –} pairs may provide further speed-up due to their contribution to screening of the Coulomb barrier. Furthermore, the energy collection system can benefit from the absence of the lithium blanket, both in simplicity and compactness. The usual thermal cycle can be bypassed with comparable efficiency levels using hadron calorimetry and third-generation photovoltaic cells, possibly allowing to extend the use of fusion reactors to broader contexts, most notably maritime transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

S961, an insulin receptor antagonist causes hyperinsulinemia, insulin-resistance and depletion of energy stores in rats

Research highlights: {yields}Insulin receptor antagonist S961 causes hyperglycemia, hyperinsulinemia and insulin resistance in rats. {yields}Peroxysome-proliferator-activated-receptor-gamma agonist pioglitazone improves S961 induced hyperglycemia and glucose intolerance. {yields}Long term treatment with insulin receptor antagonist S961 results in the decreased adiposity and hepatic glycogen content. {yields}Improvement in the hyperglycemia and glucose intolerance by pioglitazone clearly demonstrates that S961 treated rats can be successfully used to screen the novel therapeutic interventions having potential to improve glucose disposal through receptor independent mechanisms. -- Abstract: Impairment in the insulin receptor signaling and insulin mediated effects are the key features of type 2 diabetes. Here we report that S961, a peptide insulin receptor antagonist induces hyperglycemia, hyperinsulinemia ({approx}18-fold), glucose intolerance and impairment in the insulin mediated glucose disposal in the Sprague-Dawley rats. Further, long-term S961 treatment (15 day, 10 nM/kg/day) depletes energy storage as evident from decrease in the adiposity and hepatic glycogen content. However, peroxysome-proliferator-activated-receptor-gamma (PPAR{gamma}) agonist pioglitazone significantly (P < 0.001) restored S961 induced hyperglycemia (196.73 {+-} 16.32 vs. 126.37 {+-} 27.07 mg/dl) and glucose intolerance ({approx}78%). Improvement in the hyperglycemia and glucose intolerance by pioglitazone clearly demonstrates that S961 treated rats can be successfully used to screen the novel therapeutic interventions having potential to improve glucose disposal through receptor independent mechanisms. Further, results of the present study reconfirms and provide direct evidence to the crucial role of insulin receptor signaling in the glucose homeostasis and fuel metabolism.

60 APPLIED LIFE SCIENCES↗

Real-time monitoring of IL-6 and IL-10 reporter expression for anti-inflammation activity in live RAW 264.7 cells

Highlights: • This assay could monitor expression of IL-6 and IL-10 reporters in real-time. • The assay continuously determines expression of reporters in living single cells. • Lipopolysaccharide strongly induces expression of IL-6 and IL-10 reporters. In previous study, we suggested that the interleukin (IL)-6 and IL-10 could serve as a good biomarker for anti-inflammation that related to chronic inflammatory disease. Recently, we are finding new anti-inflammation compounds from natural products by screening of IL-6 and IL-10 levels. Although, we could measure IL-6 and IL-10 levels by several methods. However, all methods could not measure continuous kinetic of IL-6 and IL-10 levels. Most methods have multiple steps and take a long time. Therefore, there is no a suitable method for screening. To this end, we established IL-6 and IL-10 promoter assay which can monitor with reference gene as Glyceraldehyde 3-phosphate dehydrogenase (gapdh) promoter in living single cell. It could determine IL-6 and IL-10 levels continuously in real-time within two steps. We evaluated IL-6 and IL-10 reporter expression in LPS-induced RAW 264.7 cells with well-known anti-inflammatory compounds such as quercetin, xanthones, β-D-glucan and dexamethasone. As the results, the expression of IL-6 and IL-10 reporters were strongly induced by LPS. The expression of IL-6 reporter was inhibited by all anti-inflammation compounds in LPS-induced RAW 264.7 cells. The expression of IL-10 reporter was inhibited by quercetin, xanthones and dexamethasone in LPS-induced RAW 264.7 cells. While, expression of IL-10 reporter was induced by β-D-glucan. These results indicated that this assay could use for determination of IL-6 and IL-10 reporter expression in LPS-induced RAW 264.7 cells for anti-inflammation activity. Moreover, the results showed that natural compounds have an effect on the time course of IL-6 and IL-10 expressions. Therefore, real-time monitoring has a merit for natural compounds screening. We suggested that this assay could serve as a compound screening assay for anti-inflammation activity.

60 APPLIED LIFE SCIENCES↗

Liquid acquisition devices for superfluid helium transfer

To transfer superfluid helium (He II) in the milli-g or micro-g environment in orbit, it is necessary to provide a reasonably steady supply of liquid to the inlet of the pump in the supply dewar. To accomplish this without providing an artificial gravity through acceleration requires a liquid acquisition device. Fluid swirl and electrostatic devices have been proposed to orientate the fluid. However, the simplest mechanisms appear to be the use of surface tension or the thermomechanical effect. This paper examines four concepts for providing He II to the inlet of a thermomechanical pump. The devices are a distributed thermomechanical pump, a distributed pump with a main thermomechanical pump, a screened channel system and a vane/sponge combination. Calculations on the efficiency of these types of liquid acquisition devices are made using laboratory data from tests involving small scale devices where applicable. These calculations show that the latter two types of liquid acquisition devices are the most efficient. Questions as to the probability of cavitation and the effect of the residual shuttle acceleration on their operation remain to be answered, however.

Dipirro, M. J.↗