Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radar observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Science Applications of Phased Array Radars

Phased array radars (PARs) are a promising observing technology, at the cusp of being available to the broader meteorological community. PARs offer near instantaneous sampling of the atmosphere with flexible beam forming, multi-functionality, low operational and maintenance costs, and without mechanical inertia limitations. These PAR features are transformative compared to those offered by our current reflector-based meteorological radars. The integration of PARs into meteorological research has the potential to revolutionize the way we observe the atmosphere. The rate of adoption of PARs in research will depend on many factors including i) the need to continue educating the scientific community on the full technical capabilities and trade-offs of PARs through an engaging dialogue with the science and engineering communities and ii) the need to communicate the breadth of scientific bottlenecks that PARs can overcome in atmospheric measurements and the new research avenues that are now possible using PARs in concert with other measurement systems. The former is the subject of a companion article that focuses on PAR technology while the latter is the objective here.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Evidence of gravity wave-tidal interaction observed near the summer mesopause at Poker Flat, Alaska

An analysis of gravity wave-tidal interaction observed near the mesopause by the MST radar at Poker Flat in July of 1986 is presented. The observations revealed daily mean wind maxima of about 60 m/sec westward and 20 m/sec southward with daily mean momentum fluxes, contributed by gravity waves with periods less than 1 hour of 4-5 sq m/sec sq eastward and 1-2 sq m/sec sq northward. Considerable hourly height variability was found to exist for both winds and momentum fluxes. A significant modulation of the fluxes by tidal winds was observed, characterized by out-of-phase correlations over a number of heights.

Wang, Ding-Yi↗
DOE OSTI2026

ARM FY2026 Radar Plan

The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) User Facility maintains a suite of advanced atmospheric radar systems that serve as critical tools in ARM’s mission to provide continuous, high-quality observations for advancing the understanding and modeling of atmospheric processes. These radar systems enable detailed characterization of clouds, precipitation, and dynamic structures in the atmosphere, supporting a broad range of scientific applications. The number of deployed systems exceeds what current staffing levels can fully support for continuous 24/7/365 operation. As such, it is essential to have a clearly defined and community-informed plan that prioritizes radar operations and communicates ARM’s strategy for sustaining and evolving these observational assets. This FY2026 Radar Plan outlines ARM’s approach to managing its radar portfolio—balancing scientific impact, operational feasibility, and long-term sustainability. It reflects ARM’s continued commitment to delivering calibrated, well-documented radar data products that enable process-level studies and support the development and evaluation of weather and climate models. Through this plan, ARM aims to ensure transparency in decision-making, alignment with user needs, and support for innovative science across the facility’s fixed and mobile observatories. Given uncertainties around the Fiscal Year (FY) 2026 budget, this plan was developed to assume business as usual and will be updated as budgets and plans may change. It should be noted that, given the limited timeframe involved, this plan will be more succinct than previous plans.

47 OTHER INSTRUMENTATION↗
NASA NTRS1977

Preliminary comparisons of VHF radar maps of F-region irregularities with scintillations in the equatorial region

Multiantenna 50 MHz radar backscatter maps of echo power from night-time F-region equatiorial irregularities obtained at Jicamarca, Peru were compared with simultaneous VHF scintillation observations from Huancayo at 137 and 254 MHz during the period 20 November to 12 December 1975. Saturation of VHF scintillations in excess of 20 dB was observed at both these frequencies during times when radar maps showed large intense plume structures rising into the topside ionosphere. On nights when only thin layers of bottomside irregularities were observed, moderate to weak scintillations were recorded at VHF. Preliminary values of east-west horizontal irregularity drift velocities were obtained and compared with scintillation rate observations. Using the 1.5-deg and 4.5-deg longitudinal separation between the Jicamarca radar and ionospheric observation points of the two satellites from Huancayo, information was derived regarding large-scale east-west structure during the development phase of the irregularities.

Basu, S.↗
NASA NTRS1976

Remote sensing of soil moisture

The surface emissivity and reflectivity of soil are strong functions of its moisture content. Changes in emissivity, observed by passive microwave techniques (radiometry), and changes in reflectivity, observed by active microwave techniques (radar), can provide information on the moisture content of the 0 to 5 cm surface layer. In addition, the thermal inertia of the surface layer, which can be remotely sensed by observing the diurnal range of surface temperature, is an indicator of soil moisture content. The thermal infrared approach to remote sensing of soil moisture has little utility in the presence of cloud cover, but provides soil moisture data at high spatial resolutions and thermal data which are a potentially useful indicator of crop status. Microwave techniques can penetrate cloud covers. The passive technique has been demonstrated by both aircraft and spacecraft instruments, but spatial resolution is limited by the size of the antenna which can be flown. Active microwave systems offer the possibility of better spatial resolution, but have yet to be demonstrated from aircraft or spacecraft platforms.

Schmugge, T.↗
NASA NTRS1987

The Spaceborne Imaging Radar program: SIR-C - The next step toward EOS

The NASA Shuttle Imaging Radar SIR-C experiments will investigate earth surface and environment phenomena to deepen understanding of terra firma, biosphere, hydrosphere, cryosphere, and atmosphere components of the earth system, capitalizing on the observational capabilities of orbiting multiparameter radar sensors alone or in combination with other sensors. The SIR-C sensor encompasses an antenna array, an exciter, receivers, a data-handling network, and the ground SAR processor. It will be possible to steer the antenna beam electronically, so that the radar look angle can be varied.

Evans, Diane↗
NASA NTRS1992

Planetary Radar Astronomy

Planetary radar astronomy is the study of Solar System entities by transmitting a radio signal toward the target and then receiving and analyzing the echo. This field of research has primarily involved observations with Earth-based radar telescopes, but also includes certain experiments with a spaceborne transmitter and/or receiver.

radar↗
NASA NTRS2008

Reducing Surface Clutter in Cloud Profiling Radar Data

An algorithm has been devised to reduce ground clutter in the data products of the CloudSat Cloud Profiling Radar (CPR), which is a nadir-looking radar instrument, in orbit around the Earth, that measures power backscattered by clouds as a function of distance from the instrument. Ground clutter contaminates the CPR data in the lowest 1 km of the atmospheric profile, heretofore making it impossible to use CPR data to satisfy the scientific interest in studying clouds and light rainfall at low altitude. The algorithm is based partly on the fact that the CloudSat orbit is such that the geodetic altitude of the CPR varies continuously over a range of approximately 25 km. As the geodetic altitude changes, the radar timing parameters are changed at intervals defined by flight software in order to keep the troposphere inside a data-collection time window. However, within each interval, the surface of the Earth continuously "scans through" (that is, it moves across) a few range bins of the data time window. For each radar profile, only few samples [one for every range-bin increment ((Delta)r = 240 m)] of the surface-clutter signature are available around the range bin in which the peak of surface return is observed, but samples in consecutive radar profiles are offset slightly (by amounts much less than (Delta)r) with respect to each other according to the relative change in geodetic altitude. As a consequence, in a case in which the surface area under examination is homogenous (e.g., an ocean surface), a sequence of consecutive radar profiles of the surface in that area contains samples of the surface response with range resolution (Delta)p much finer than the range-bin increment ((Delta)p << r). Once the high-resolution surface response has thus become available, the profile of surface clutter can be accurately estimated by use of a conventional maximum-correlation scheme: A translated and scaled version of the high-resolution surface response is fitted to the observed low-resolution profile. The translation and scaling factors that optimize the fit in a maximum-correlation sense represent (1) the true position of the surface relative to the sampled surface peak and (2) the magnitude of the surface backscatter. The performance of this algorithm has been tested on CloudSat data acquired over an ocean surface. A preliminary analysis of the test data showed a surface-clutter-rejection ratio over flat surfaces of >10 dB and a reduction of the contaminated altitude over ocean from about 1 km to about 0.5 km (over the ocean). The algorithm has been embedded in CloudSat L1B processing as of Release 04 (July 2007), and the estimated flat surface clutter is removed in L2B-GEOPROF product from the observed profile of reflectivity (see CloudSat product documentation for details and performance at http://www.cloudsat.cira.colostate.edu/ dataSpecs.php?prodid=1).

Tanelli, Simone↗
NASA NTRS2022

Progress in Time-Series Soil Moisture Retrieval Using L- and S-Band Radar Backscatter

L- and S-band observations from NASA's Passive/Active L/S band (PALS) sensor from the SMEX02 campaign were used to estimate soil moisture. The retrieval process is based on the “alpha approximation” method. This method utilizes a time-series of normalized radar backscatter measurements as well as ancillary information to estimate soil moisture over the Walnut Creek watershed. The resulting retrieved soil moistures are compared to in-situ soil moisture measurements at multiple test sites within the watershed. The calculations show reasonable results for both L- and S-band and provide further insight into the use of L- and S-bands for the upcoming NASA/ISRO mission.

Soil moisture↗
NASA NTRS2015

Further Research on the Electrification of Pyrocumulus Clouds

Past research on pyrocumulus electrification has demonstrated that a variety of lightning types can occur, including cloud‐to‐ground (CG) flashes, sometimes of dominant positive polarity, as well as small intra‐cloud (IC) discharges in the upper levels of the pyro‐cloud. In Colorado during summer 2012, the first combined polarimetric radar, multi‐Doppler radar, and three‐dimensional lightning mapping array (LMA) observations of lightning‐producing pyrocumulus were obtained. These observations suggested that the National Lightning Detection Network (NLDN) was not sensitive enough to detect the small IC flashes that appear to be the dominant mode of lightning in these clouds. However, after an upgrade to the network in late 2012, the NLDN began detecting some of this pyrocumulus lightning. Multiple pyrocumulus clouds documented by the University of Wisconsin for various fires in 2013 and 2014 (including over the Rim, West Fork Complex, Yarnell Hill, Hardluck, and several other incidents) are examined and reported on here. This study exploits the increased‐sensitivity NLDN as well as the new nationwide U.S. network of polarimetric Next‐generation Radars (NEXRADs). These observations document the common occurrence of a polarimetric "dirty ice" signature ‐ modest reflectivities (20‐40+ dBZ), near‐zero differential reflectivity, and reduced correlation coefficient (less than 0.9) ‐ prior to the production of lightning. This signature is indicative of a mixture of ash and ice particles in the upper levels of the pyro‐cloud (less than ‐20 C), with the ice interpreted as being necessary for pyro‐cloud electrification. Pseudo‐Geostationary Lightning Mapper (GLM) data will be produced from the 2012 LMA observations, and the ability of GLM to detect small pyrocumulus ICs will be assessed. The utility of lightning and polarimetric radar for documenting rapid wildfire growth, as well as for documenting pyrocumulus impacts on the composition of the upper troposphere/lower stratosphere (UTLS), will be discussed.

Lang, Timothy J.↗
NASA NTRS2002

Numerical Study of a Convective Turbulence Encounter

A numerical simulation of a convective turbulence event is investigated and compared with observational data. The specific case was encountered during one of NASA's flight tests and was characterized by severe turbulence. The event was associated with overshooting convective turrets that contained low to moderate radar reflectivity. Model comparisons with observations are quite favorable. Turbulence hazard metrics are proposed and applied to the numerical data set. Issues such as adequate grid size are examined.

Proctor, Fred H.↗
NASA NTRS1988

Aercibo S-band radar program

The high powered 12.6 cm wavelength radar on the 1000-ft Arecibo reflector is utilized for a number of solar system studies. Chief among these are: (1) surface reflectivity mapping of Venus, Mercury and the Moon. Resolutions achievable on Venus are less than 1.5 km over some areas, for Mercury about 30 km and for the Moon 200 m at present, (2) high time resolution ranging measurements to the surfaces of the terrestrial planets. These measurements are used to obtain profiles and scattering parameters in the equatorial region. They can also be used to test relativistic and gravitational theories by monitoring the rate of advance of the perihelion of the orbit of Mercury and placing limits on the stability of the gravitational constant, (3) measurements of the orbital parameters, figure, spin vector and surface properties of asteroids and comets, and (4) observations of the Galilean Satellites of Jupiter and the satellites of Mars, Phobos and Deimos. The Galilean Satellites of Jupiter were re-observed with the 12.6 cm radar for the first time since 1981. Much more accurate measurements of the scattering properties of the three icy satellites were obtained that generally confirmed previous observations. Unambiguous measurements of the cross section and circular polarizations ratio of Io were also obtained for the first time. The radar scattering properties of four mainbelt asteroids and one near-earth asteroid were studied.

Campbell, Donald B.↗
NASA NTRS1991

Stress analysis of Tellus Regio, Venus, based on gravity and topography - Comparison with Venera 15/16 radar images

The tectonics of the Tellus Region highland on Venus is examined using the altimetry and gravity data collected by Pioneer Venus, which were incorporated into a thin elastic shell model to calculate both the global (long-wavelength) and the regional (short-wavelength) stresses for various assumed values of crust, lithosphere, and mantle thickness and modes of compensation. The resultant stress fields were compared to the surface morphology observed in the Venera 15/16 radar images and interpreted in terms of stress history of Tellus Regio. The best fitting parameters were found to be consistent with minor amounts of lithospheric flexure being necessary to produce the observed surface features of this region.

Williams, David R.↗
NASA NTRS1990

Three-dimensional simulation of the Denver 11 July Storm of 1988 - An intense microburst event

An account is given of results from a numerical simulation of an intense microburst-generating storm observed near Denver during a test operation of the Terminal Doppler Radar System, on July 11, 1988. The numerical simulation encompassed comparisons with 'observed' data from measurements by Doppler radar, aircraft flight data recorders, and surface field instruments. Model results are in excellent qualitative and quantitative agreement with major storm feature observations. The intense microburst that was generated some distance 'downshear' of the primary precipitation area was driven by cooling due to sublimating snow.

Proctor, Fred H.↗
NASA NTRS2019

An Integrated Approach to Weather Radar Calibration and Monitoring Using Ground Clutter and Satellite Comparisons

The stability and accuracy of weather radar reflectivity calibration are imperative for quantitative applications, such as rainfall estimation, severe weather monitoring and nowcasting, and assimilation in numerical weather prediction models. Various radar calibration and monitoring techniques have been developed, but only recently have integrated approaches been proposed, that is, using different calibration techniques in combination. In this paper the following three techniques are used: 1) ground clutter monitoring, 2) comparisons with spaceborne radars, and 3) the self-consistency of polarimetric variables. These techniques are applied to a C-band polarimetric radar (CPOL) located in the Australian tropics since 1998. The ground clutter monitoring technique is applied to each radar volumetric scan and provides a means to reliably detect changes in calibration, relative to a baseline. It is remarkably stable to within a standard deviation of 0.1 dB (decibels). To obtain an absolute calibration value, CPOL observations are compared to spaceborne radars on board TRMM (Tropical Rainfall Measuring Mission) and GPM (Global Precipitation Measurement) using a volume-matching technique. Using an iterative procedure and stable calibration periods identified by the ground echoes technique, we improve the accuracy of this technique to about 1 dB. Finally, we review the self-consistency technique and constrain its assumptions using results from the hybrid TRMM-GPM and ground echo technique. Small changes in the self-consistency parameterization can lead to 5 dB of variation in the reflectivity calibration. We find that the drop-shape model of Brandes et al. with a standard deviation of the canting angle of 12 degrees best matches our dataset.

Louf, Valentin↗
NASA NTRSDate not supplied

Integral Equation Model of the Martian Surface layer for the Detection of Buried Ice Deposits in Support of the international Ice Mapping Mission Synthetic Aperture Radar

This work implemented a 3-D Electromagnetic Scattering model to gain a better understanding in the observations of L- and P-band radar returns from the multi-layered Martian upper surface layer. The model is based on the Integral Equation Model (IEM) developed by Adrian Fung. Our model implementation treats the upper surface (regolith) layer as an inhomogeneous medium with irregular boundaries for a range of Martian surface and shallow subsurface scenarios. The model is well suited to study the near subsurface (upper 10 meters of surface sediments) ice detection capability of the L-band (32 cm wavelength) Synthetic Aperture Radar (SAR) planned for the international Mars Ice Mapping (I-MIM) mission launching later in the 2020s.

surface roughness, Integral Equation Model (IEM)↗
NASA NTRS1992

Preliminary analysis of ERS-1 SAR for forest ecosystem studies

An image obtained by the C-band VV-polarized ERS-1 SAR is examined with respect to potential land applications. A scene obtained near noon on August 15, 1991, along the U.S.-Canadian border near Sault Ste. Marie is calibrated relative to an array of trihedral corner reflectors and active radar calibrators distributed across the swath. Extensive contemporaneous ground observations of forest stands are used to predict the radar backscattering coefficient sigma at the time of the SAR overpass using a first-order vector radiative transfer model. These predictions generally agree with the calibrated ERS-1 data to within 1 dB. It is demonstrated that the dynamic range of sigma is sufficient to perform limited discrimination of various forest and grassland communities even for a single-date observation. Furthermore, retrieval of near-surface soil moisture is feasible for grass-covered soils when plant biomass is less than 1 tonne/ha.

Dobson, M. G.↗