Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Measurements of admittances and characteristic combustion times of reactive gaseous propellant coaxial injectors

The results of an experimental investigation that was concerned with the quantitative determination of the capabilities of combustion processes associated with coaxial injectors to amplify and sustain combustor oscillations was described. The driving provided by the combustion process was determined by employing the modified standing-wave method utilizing coaxial injectors and air-acetylene mixtures. Analyses of the measured data indicate that the investigated injectors are capable of initiating and amplifying combustion instabilities under favorable conditions of injector-combustion coupling and over certain frequency ranges. These frequency ranges and the frequency at which an injector's driving capacity is maximum are observed to depend upon the equivalence ratio, the pressure drop across the injector orifices and the number of injector elements. The characteristic combustion times of coaxial injectors were determined from steady state temperature measurements.

Janardan, B. A.↗
NASA NTRS1979

Measurements of reactive gaseous rocket injector admittances

The paper describes the results of an experimental study of the quantitative determination of the capabilities of the combustion processes associated with coaxial gaseous propellant rocket injectors to drive combustor pressure oscillations. The data, obtained by employing the modified impedance tube technique with compressed air as the oxidizer and acetylene gas as the fuel, describe the frequency dependence of the admittance of the combined injector-combustion process. The measured data are compared with the predictions of the Feiler and Heidmann analytical model utilizing different values for the characteristic combustion time tau sub b. The values of tau sub b which result in a best fit between the measured and predicted data are indicated for different equivalence ratios. It is shown that for the coaxial injector investigated in this study the tau sub b varies between 0.7 and 1.2 msec for equivalence ratios in the range of 0.57 to 1.31. In addition, the experimental data indicate that the tested injector system could drive combustion instabilities over a frequency range that is in qualitative agreement with the predictions of the Feiler and Heidmann model.

Janardan, B. A.↗
NASA NTRS1980

Reactive mixing in swirling flows

The effect of swirl on the mixing of two gas streams of the same density and axial velocity in a coaxial annular geometry has been examined. The flow is studied via a fluorescent tracer, 2-3 biacetyl. Through direct excitation, collisional excitation, and collisional de-excitation of the tracer, the turbulent transport, molecularly mixed and unmixed regions in the flow are visualized. The visualization results indicate that there are interesting three dimensional inviscid large scale structures. Mixing in the molecular level is found to be mainly localized in these structures.

Cheng, W. K.↗
NASA NTRS1978

In situ measurement of reactive neutral constituents in the thermosphere by atomic and molecular resonance fluorescence

The Tethered Satellite System in combination with in situ atomic and molecular resonance fluorescence techniques can treat the problem of simultaneously determining the absolute density of atomic and molecular species known to control the photochemical structure of the upper atmosphere. Two familities of reactants which can be treated by these techniques are the nitrogen oxygen family and the hydrogen oxygen family.

Anderson, J. G.↗
NASA NTRS1980

Reactivity of stratospheric aerosols to small amounts of ammonia in the laboratory environment

Trace ammonia in laboratory air reacts easily with sulfuric acid aerosol samples to form crystalline ammonium sulfate. Argon atmospheres, however, protect sampling surfaces from ammonia contamination. It is found that atmospheric aerosols treated in this way contain only sulfuric acid. After an hour exposed to laboratory air, these same samples convert to ammonium sulfate. Aerosol particles have been collected, using argon control, to determine if the absence of crystalline sulfate is common. But so far there is no evidence that aerosols are neutralized by ammonia in the stratosphere.

Hayes, D.↗
NASA NTRS1982

Optogalvanic wavelength calibration for laser monitoring of reactive atmospheric species

Laser-based techniques have been successfully employed for monitoring atmospheric species of importance to stratospheric ozone chemistry or tropospheric air quality control. When spectroscopic methods using tunable lasers are used, a simultaneously recorded reference spectrum is required for wavelength calibration. For stable species this is readily achieved by incorporating into the sensing instrument a reference cell containing the species to be monitored. However, when the species of interest is short-lived, this approach is unsuitable. It is proposed that wavelength calibration for short-lived species may be achieved by generating the species of interest in an electrical or RF discharge and using optogalvanic detection as a simple, sensitive, and reliable means of recording calibration spectra. The wide applicability of this method is emphasized. Ultraviolet, visible, or infrared lasers, either CW or pulsed, may be used in aircraft, balloon, or shuttle experiments for sensing atoms, molecules, radicals, or ions.

Webster, C. R.↗
NASA NTRS1983

Impact reactivity of materials at very high oxygen pressure

The requirements for impact testing of materials in an oxygen atmosphere at pressures from 82.7 MPa (12,000 psi) to 172 MPa (25,000 psi) were evaluated. The impact tester system was evaluated for potential pressure increases from 69 MPa (10,000 psi) to 82.7 MPa (12,000 psi). The low pressure oxygen and nitrogen systems, the impact tower, the impact test cell, and the high pressure oxygen system were evaluated individually. Although the structural integrity of the impact test cell and the compressor were sufficient for operation at 82.7 MPa (12,000 psi), studies revealed possible material incompatibility at that pressure and above. It was recommended that if a component should be replaced for 82.7 MPa (12,000 psi) operation the replacement should meet the final objectives of 172 MPa (25,000 psi). Recommended changes in the system include; use of Monel 400 for pressures above 82.7 MPa (12,000 psi), use of bellows to replace the seal in the impact tester, use of a sapphire window attached to a fiber optic for event sensing, and use of a three diaphragm compressor.

Connor, H. W.↗
NASA NTRS1984

Ultralight reactive metal foams produced as structural shapes in space: System design

This autonomous experiment for foaming metals in space involved: (1) payload support structure; (2) furnace and foaming apparatus; (3) electronic controls; (4) battery power; and (5) metallurgy. Emphasis was laid on a modular design which was easily modifiable and which offered maximum durability, safety, and failure tolerance.

Cocks, F. H.↗
NASA NTRS1984

Reactive sintering of SiC

Investigation of the sintering processes involved in the sintering of SiC revealed a connection between the types and quantities of sintering additives or catalysts and densification, initial shrinkage, and weight loss of the sintered SiC material. By sintering processes, is meant the methods of mass transport, namely solid vapor transport and grain boundary diffusion.

Kim, Y. W.↗
NASA NTRS1984

A Production System Model of Capturing Reactive Moving Targets

Subjects manipulated a control stick to position a cursor over a moving target that reacted with a computer-generated escape strategy. The cursor movements were described at two levels of abstraction. At the upper level, a production system described transitions among four modes of activity; rapid acquisition, close following, a predictive mode, and herding. Within each mode, differential equations described trajectory-generating mechanisms. A simulation of this two-level model captures the targets in a manner resembling the episodic time histories of human subjects.

Jagacinski, R. J.↗
NASA NTRS1985

Real-time SEM studies in controlled reactive atmospheres

A unique scanning electron accessory has been developed that allows the observation of specimens under partial pressures of any gas. The sample is placed in a metal support boat inside a special sample holder. The sample in the boat is imaged on a CRT and is simultaneously recorded on a videotape, allowing the reaction between the sample and the gas to be observed in real time. Sample changes can be seen continuously as the sample is being heated or cooled. This process allows the observation of material transformations such as phase changes as they happen. Temperatures as high as 1000 C have been used and are continuously monitored using a thermocouple with a digital display on the CRT and videotape. X-ray analyses can also be run before and after any reactions. In the study described here, thick-film screen-printing inks using molybdenum/tin compositions as a replacement for silver were developed to be used on terrestrial photovoltaic cells. Pieces were placed on the sample stage and heated in both O2 and H2 atmospheres. The results were used to determine the most effective frits to be used in the thick-film inks.

Gallagher, B. D.↗
NASA NTRS1986

The reactive thermal conductivity of air at high temperatures

This paper presents the thermal conductivity of air from the dissociation and ionization reactions of the nitrogen and oxygen species in air from 1000 K to 25,000 K. The results for nitrogen are compared with results for the nonreactive (frozen) contribution to the thermal conductivity of the 'nitrogen system' (N2, N, N/+/, and the electron, e). At 6000 K, the contribution to the thermal conductivity from the dissociation of N2 is more than an order of magnitude greater than the frozen thermal conductivity and, at 15,000 K, the contribution to the thermal conductivity from the ionization of nitrogen atoms is about as large as the contribution from the frozen thermal conductivity.

Biolsi, L.↗
NASA NTRS1986

Presence, segregation and reactivity of H, C and N dissolved in some refractory oxides

The sources of impurities, particularly carbon, in high melting oxides and silicates are discussed, along with detection and quantification methods. The impurities are important for their effects on bulk material properties through the media of, e.g., surface or grain boundary characteristics. The impurities are usually encountered by the contact of the oxide (refractory) material with volatiles such as H2O and CO2, which become incorporated in the material and form anion complexes with oxygen acting as a covalent bonded ligand. The specific processes undergone by MgO in assimilating C impurities are delineated, using data obtained with X-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry and nuclear reaction profiling. Finally, maintenance of a supersaturated solid solution with C impurities by space charge control is described as a means of offset impurity effects.

Freund, F.↗