Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RANS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

High thermoelectric performance of n-type PbTe 1-y S y due to deep lying states induced by indium doping and spinodal decomposition

Good thermoelectric materials should have high engineering figure-of-merit (ZT) eng , not peak ZT, to achieve high conversion efficiency. In this work, we achieved a good (ZT) eng by optimizing the carrier concentration to improve the room temperature ZT using deep lying dopant, indium, in PbTe 1-y S y . It was found that a room temperature ZT as high as ~0.5 and a peak ZT ~1.1 at about 673 K were obtained in Pb 0.98 In 0.02 Te 0.8 S 0.2 due to a lower thermal conductivity by alloy scattering and Spinodal decomposition. The calculated efficiency could be as high as ~12% at cold side 323 K and hot side 773 K. The approach is expected to work in other materials systems too.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Novel Approach to Synthesize Micrometer-Sized Porous Silicon as a High Performance Anode for Lithium-Ion Batteries

Porous structured silicon (p-Si) has been recognized as one of the most promising anodes for Li-ion batteries. However, many available methods to synthesize p-Si are difficult to scale up due to their high production cost. Here we introduce a new scalable approach to obtain spherical micrometer-sized silicon with unique porous structure by using a microemulsion and magnesiothermic reduction method. The spherical micron-sized p-Si particles prepared by this approach consist of highly aligned nano-sized silicon and exhibit a tap density close to that of bulk Si particles. They have demonstrated significantly improved electrochemical stability compared to nano-Si. Well controlled void space and a highly graphitic carbon coating on the p-Si particles enable good stability of the structure and low overall resistance, thus resulting in a Si-based anode with high capacity (~1467 mAh g-1 at 1C), enhanced cycle life (200 cycles with 90% capacity retention), and high rate capability (~650 mAh g-1 at 5C). This scalable approach may also be generalized to prepare other hierarchical structured high capacity anode materials for constructing high energy density lithium ion batteries.

Jia, Haiping↗

Using the 18-Electron Rule To Understand the Nominal 19-Electron Half-Heusler NbCoSb with Nb Vacancies

The 18-electron rule is a widely used criterion in the search for new half-Heusler thermoelectric materials. However, several 19-electron compounds such as NbCoSb have been found to be stable and exhibit thermoelectric properties rivaling state-of-the art materials. Using synchrotron X-ray diffraction and density functional theory calculations, we show that samples with nominal (19-electron) composition NbCoSb actually contain a half-Heusler phase with composition Nb0.84CoSb. The large amount of stable Nb vacancies reduces the overall electron count, which brings the stoichiometry of the compound close to an 18-electron count, and stabilizes the material. Excess electrons beyond 18 electrons provide heavy doping needed to make these good thermoelectric materials. This work demonstrates that considering possible defect chemistry and allowing small variation of electron counting leads to extra degrees of freedom for tailoring thermoelectric properties and exploring new compounds. Here we discuss the 18-electron rule as a guide to find defect-free half-Heusler semiconductors. Other electron counts such as 19-electron NbCoSb can also be expected to be stable as n-type metals, perhaps with cation vacancy defects to reduce the electron count.

36 MATERIALS SCIENCE↗

Dose-Dependent Enrichments and Improved Redox Status in Tissues of Broiler Chicks under Heat Stress by Dietary Supplemental Microalgal Astaxanthin

Here, astaxanthin (AST) is a well-known carotenoid with a high antioxidant capacity. This study was designed to evaluate the nutritional and metabolic effects of microalgal AST added to the diets of broiler chicks under heat stress. A total of 240 Cornish male chicks (1 day old) were divided into six cages per treatment (eight chicks per cage) and fed a corn-soybean meal diet supplemented with AST from Haematococcus pluvialis at 0, 10, 20, 40, and 80 mg/kg for 6 weeks. Heat stress was employed during weeks 4-6. The supplementation led to dose-dependent enrichments ( P < 0.05) of AST and total carotenoids in the plasma, the liver, and the breast and thigh muscles. There were similar enhancements ( P < 0.05) of oxygen-radical-absorbance capacities, but there were decreases or mixed responses ( P < 0.05) of glutathione concentrations and glutathione peroxidase activities in the tissues. In conclusion, supplemental dietary microalgal AST was bioavailable to the chicks and enriched in their tissues independent of heat stress, leading to coordinated changes in their endogenous antioxidant defense and meat quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stretchable Nanolasing from Hybrid Quadrupole Plasmons

This paper reports a robust and stretchable nanolaser platform that can preserve its high mode quality by exploiting hybrid quadrupole plasmons as an optical feedback mechanism. Increasing the size of metal nanoparticles in an array can introduce ultra-sharp lattice plasmon resonances with out-of-plane charge oscillations that are tolerant to lateral strain. By patterning these nanoparticles onto an elastomeric slab surrounded by liquid gain, we realized reversible, tunable nanolasing with high strain sensitivity and no hysteresis. Furthermore, our semi-quantum modeling demonstrates that lasing build-up occurs at the hybrid quadrupole electromagnetic hot spots, which provides a route towards mechanical modulation of light-matter interactions on the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Strain-Driven Nanoscale Phase Competition near the Antipolar–Nonpolar Phase Boundary in Bi 0.7 La 0.3 FeO 3 Thin Films

Complex-oxide materials tuned to be near phase boundaries via chemistry/composition, temperature, pressure, etc. are known to exhibit large susceptibilities. Here, we observe a strain-driven nanoscale phase competition in epitaxially constrained Bi 0.7 La 0.3 FeO 3 thin films near the antipolar-nonpolar phase boundary and explore the evolution of the structural, dielectric, (anti)ferroelectric, and magnetic properties with strain. We find that compressive and tensile strains can stabilize an antipolar PbZrO 3 -like Pbam phase and a nonpolar Pnma orthorhombic phase, respectively. Heterostructures grown with little to no strain exhibit a self-assembled nanoscale mixture of the two orthorhombic phases, wherein the relative fraction of each phase can be modified with film thickness. Subsequent investigation of the dielectric and (anti)ferroelectric properties reveals an electric-field-driven phase transformation from the nonpolar phase to the antipolar phase. X-ray linear dichroism reveals that the antiferromagnetic-spin axes can be effectively modified by the strain-induced phase transition. This evolution of antiferromagnetic-spin axes can be leveraged in exchange coupling between the antiferromagnetic Bi 0.7 La 0.3 FeO 3 and a ferromagnetic Co0.9Fe0.1 layer to tune the ferromagnetic easy axis of the Co 0.9 Fe 0.1 . These results demonstrate that besides chemical alloying, epitaxial strain is an alternative and effective way to modify subtle phase relations and tune physical properties in rare earth-alloyed BiFeO 3 . Furthermore, the observation of antiferroelectric-antiferromagnetic properties in the Pbam Bi 0.7 La 0.3 FeO 3 phase could be of significant scientific interest and great potential in magnetoelectric devices because of its dual antiferroic nature.

36 MATERIALS SCIENCE↗

Multistates and Polyamorphism in Phase-Change K 2 Sb 8 Se 13

The phase-change (PC) materials in the majority of optical data storage media in use today exhibit a fast, reversible crystal -> amorphous phase transition that allows them to be switched between on (1) and off (0) binary states. Solid-state inorganic materials with this property are relatively common, but those exhibiting an amorphous -> amorphous transition called polyamorphism are exceptionally rare. K 2 Sb 8 Se 13 (KSS) reported here is the first example of a material that has both amorphous -> amorphous polyamorphic transition and amorphous -> crystal transition at easily accessible temperatures (227 and 263 degrees C, respectively). The transitions are associated with the atomic coordinative preferences of the atoms, and all three states of K 2 Sb 8 Se 13 are stable in air at 25 degrees C and 1 atm. All three states of K 2 Sb 8 Se 13 exhibit distinct optical bandgaps, E-g = 1.25, 1.0, and 0.74 eV, for the amorphous-II, amorphous-I, and crystalline versions, respectively. The room-temperature electrical conductivity increases by more than 2 orders of magnitude from amorphous-I to -II and by another 2 orders of magnitude from amorphous-II to the crystalline state. This extraordinary behavior suggests that a new class of materials exist which could provide multistate level systems to enable higher-order computing logic circuits, reconfigurable logic devices, and optical switches.

amorphous-amorphous transition↗

Pressure-Induced Amorphization and Polyamorphism in One-Dimensional Single-Crystal TiO[subscript 2] Nanomaterials

The structural phase transitions of single-crystal TiO{sub 2}-B nanoribbons were investigated in situ at high pressure using synchrotron X-ray diffraction and Raman scattering. Our results have shown a pressure-induced amorphization (PIA) occurred in TiO{sub 2}-B nanoribbons upon compression, resulting in a high-density amorphous (HDA) form related to the baddeleyite structure. Upon decompression, the HDA form transforms to a low-density amorphous (LDA) form, while the samples still maintain their pristine nanoribbon shape. A high-resolution transmission electron microscopy (HRTEM) image reveals that the LDA phase has an {alpha}-PbO{sub 2} structure with short-range order. We propose a homogeneous nucleation mechanism to explain the pressure-induced amorphous phase transition in the TiO{sub 2}-B nanoribbons. Our study demonstrates for the first time that PIA and polyamorphism occurred in the one-dimensional (1D) TiO{sub 2} nanomaterials and provides a new method for preparing 1D amorphous nanomaterials from crystalline nanomaterials.

36 MATERIALS SCIENCE↗

Chemically Bonded Phosphorus/Graphene Hybrid as a High Performance Anode for Sodium-Ion Batteries

Room temperature sodium-ion batteries are of great interest for high-energy-density energy storage systems because of low-cost, natural abundance of sodium. Here, we report a novel graphene nanosheets-wrapped phosphorus composite as an anode for high performance sodium-ion batteries though a facile ball-milling of red phosphorus and graphene nanosheets. Not only can the graphene nanosheets significantly improve the electrical conductivity, but they also serve as a buffer layer to accommodate the large volume change of phosphorus in the charge-discharge process. As a result, the graphene wrapped phosphorus composite anode delivers a high reversible capacity of 2077 mAh/g with excellent cycling stability (1700 mAh/g after 60 cycles) and high Coulombic efficiency (>98%). This simple synthesis approach and unique nanostructure can potentially extend to other electrode materials with unstable solid electrolyte interphases in sodium-ion batteries.

chemical bonding↗