Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precipitation Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy

Highlights: • For in-process cryocooling (IPC) during FSP, an efficient cooling fixture was designed & fabricated. • FSP of Al7075 alloy with IPC setup suppressed precipitate coarsening as well as grain growth. • Nanosize η′ precipitates (20–30 nm) in IPC condition increased work hardening capacity & strength. • Simultaneous improvement in ductility & strength occurred for sample FSPed with IPC. - Abstract: Friction stir processing (FSP) of heat treatable aluminum alloys is reported to deteriorate strength and hardness properties in spite of huge grain size refinement. The improvement in strength due to the grain size refinement after FSP could not be able to offset the reduction in strength due to coarsening or dissolution of the strengthening precipitate(s). To overcome this, the present work investigates an effective way of heat rejection from the FSP zone to control the precipitate evolution besides the grain size refinement during FSP of Al7075 alloy. The FSP was carried out with standardized process parameters (i.e. 720 rpm, 65 mm/min traverse speed) under two different cooling environments: (i) at normal air cooling and (ii) by rushing a chilled mixture (−30 °C) of liquid nitrogen and methanol through the bottom of the backing plate. Microstructural evolution was examined through optical, scanning and transmission electron microscopy and electron backscatter diffraction to confirm the grain size and morphology of precipitate(s) formed. The in-process cryocooling during the FSP led to 65 and 72% improvement in the Vickers hardness and tensile strength, respectively, in comparison to the solutionized base metal. The results have been analyzed in terms of precipitate interface characteristics and its strengthening effect, Hall–Petch strengthening due to grain size reduction and tradeoff between them.

36 MATERIALS SCIENCE↗

Idaho National Laboratory Site Environmental Surveillance Program Report: Third Quarter 2023

This report for the third quarter of 2023 contains results from the INL Site environmental surveillance program’s monitoring of the U.S. Department of Energy’s Idaho National Laboratory (INL) Site’s onsite, boundary and offsite location environment, July 1 through September 30, 2023. All sample types (media) and the sampling schedule followed during 2023 are listed in Appendix A. This report contains results for the following sample types: (1) Air, including particulate air filters, charcoal cartridges, and atmospheric moisture; (2) Precipitation; (3) Surface water; (4) Milk; (5) Agricultural; and (6) Large game animal sampling.

54 ENVIRONMENTAL SCIENCES↗

Critical Issues on Materials for Gen-IV Reactors

Within the LDRD on 'Critical Issues on Materials for Gen-IV Reactors' basic thermodynamics of the Fe-Cr alloy and accurate atomistic modeling were used to help develop the capability to predict hardening, swelling and embrittlement using the paradigm of Multiscale Materials Modeling. Approaches at atomistic and mesoscale levels were linked to build-up the first steps in an integrated modeling platform that seeks to relate in a near-term effort dislocation dynamics to polycrystal plasticity. The requirements originated in the reactor systems under consideration today for future sources of nuclear energy. These requirements are beyond the present day performance of nuclear materials and calls for the development of new, high temperature, radiation resistant materials. Fe-Cr alloys with 9-12% Cr content are the base matrix of advanced ferritic/martensitic (FM) steels envisaged as fuel cladding and structural components of Gen-IV reactors. Predictive tools are needed to calculate structural and mechanical properties of these steels. This project represents a contribution in that direction. The synergy between the continuous progress of parallel computing and the spectacular advances in the theoretical framework that describes materials have lead to a significant advance in our comprehension of materials properties and their mechanical behavior. We took this progress to our advantage and within this LDRD were able to provide a detailed physical understanding of iron-chromium alloys microstructural behavior. By combining ab-initio simulations, many-body interatomic potential development, and mesoscale dislocation dynamics we were able to describe their microstructure evolution. For the first time in the case of Fe-Cr alloys, atomistic and mesoscale were merged and the first steps taken towards incorporating ordering and precipitation effects into dislocation dynamics (DD) simulations. Molecular dynamics (MD) studies of the transport of self-interstitial, vacancy and point defect clusters in concentrated Fe-Cr alloys were performed for future diffusion data calculations. A recently developed parallel MC code with displacement allowed us to predict the evolution of the defect microstructures, local chemistry changes, grain boundary segregation and precipitation resulting from radiation enhanced diffusion. We showed that grain boundaries, dislocations and free surfaces are not preferential for alpha-prime precipitation, and explained experimental observations of short-range order (SRO) in Fe-rich FeCr alloys. Our atomistic studies of dislocation hardening allowed us to obtain dislocation mobility functions for BCC pure iron and Fe-Cr and determine for FCC metals the dislocation interaction with precipitates with a description to be used in Dislocation Dynamic (DD) codes. A Synchronous parallel Kinetic Monte Carlo code was developed and tested which promises to expand the range of applicability of kMC simulations. This LDRD furthered the limits of the available science on the thermodynamic and mechanic behavior of metallic alloys and extended the application of physically-based multiscale materials modeling to cases of severe temperature and neutron fluence conditions in advanced future nuclear reactors. The report is organized as follows: after a brief introduction, we present the research activities, and results obtained. We give recommendations on future LLNL activities that may contribute to the progress in this area, together with examples of possible research lines to be supported.

36 MATERIALS SCIENCE↗

DIMENSION REDUCTION NUMERICAL CLOSURE METHOD FOR ADVECTION-DIFFUSION-REACTION SYSTEMS

Many natural physical processes exhibit a multiscale behavior, that is the same processes allow different mathematical description on different scales. The microscale description is usually based on fundamental conservation laws that form a closed system of ordinary differential equations (ODEs) or partial differential equations (PDEs) but the numerical discretization of these equations may produce a system of ODEs with an enormous number of unknowns. Furthermore, a time integration of the microscale equations usually requires time steps that are smaller than the observation time by many orders of magnitude. A direct solution of these ODEs can be extremely expensive. This necessitates development of advanced algorithms for model (or dimension) reduction. Often, we are only interested in the average behavior of the system rather than the exact solution of the ODEs. Here we developed a novel dimension reduction method that gives an approximate solution of the ODEs and gives an accurate prediction of the average behavior. The method relies on a computational closure of averaged evolution balance equations. The computational closure is achieved via short bursts of microscale simulation. The dimension reduction model was used to simulate flow and transport with mixing controlled reactions and mineral precipitation. A pore-scale model was used as a microscale model. A good agreement between microscale simulations and the accelerated microscale simulations confirms the accuracy and computational efficiency of the dimension reduction model. The method significant accelerates microscale simulations, while providing accurate approximation of the solution and accurate prediction of the average behavior of the system.

99 GENERAL AND MISCELLANEOUS↗

A novel protease activity assay using a protease-responsive chaperone protein

Protease activity assays are important for elucidating protease function and for developing new therapeutic agents. In this study, a novel turbidimetric method for determining the protease activity using a protease-responsive chaperone protein is described. For this purpose, a recombinant small heat-shock protein (sHSP) with an introduced Factor Xa protease recognition site was synthesized in bacteria. This recombinant mutant, FXa-HSP, exhibited chaperone-like activity at high temperatures in cell lysates. However, the chaperone-like activity of FXa-HSP decreased dramatically following treatment with Factor Xa. Protein precipitation was subsequently observed in the cell lysates. The reaction was Factor Xa concentration-dependent and was quantitatively suppressed by a specific inhibitor for Factor Xa. Protein aggregation was detected by a simple method based on turbidimetry. The results clearly demonstrate that this assay is an effective, easy-to-use method for determining protease activities without the requirement of labeling procedures and the use of radioisotopes.

54 ENVIRONMENTAL SCIENCES↗

The effect of heat treatment on microstructure evolution in artificially aged carbon nanotube/Al2024 composites synthesized by mechanical alloying

Although carbon nanotubes/aluminum (CNT/Al) composites are promising materials in the production of structural components, their mechanical behavior under overaging conditions has not been considered. In this paper the effect of CNTs on the microstructural and mechanical behavior of a 2024 aluminum alloy (Al2024) synthesized by mechanical alloying (MA) and powder metallurgy routes is discussed, as well as the effect of aging heat treatments at different temperatures and aging times. The mechanical behavior of composites was screened by hardness measurements as function of aging time. After 96 h of aging time, composites showed mechanical stability in their hardness performance. Images from transmission electron microscopy showed that the mechanical stability of composites was due to a homogeneous dispersion of CNTs in the aluminum matrix and a subsequent alteration in the kinetics of precipitation is due to their presence in the aluminum matrix. Even though strengthening precipitation took place during aging, this was not the main strengthening mechanism observed in composites. - Highlights: • Dispersion of carbon nanotubes during mechanical alloying • Microstructural evolution observed by HRTEM. • Mechanical performance evaluated through micro-hardness test. • Increased mechanical performance at high working temperatures • Acceleration of kinetics of precipitation due to CNTs, and milling conditions.

36 MATERIALS SCIENCE↗

Lithium-Rich Nanoscale Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 Cathode Material Prepared by Co-Precipitation Combined Freeze Drying (CP-FD) for Lithium-Ion Batteries

Nanoscale Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 material is synthesized by a co-precipitation combined freeze drying (CP-FD) method, and compared with a conventional co-precipitation method combined vacuum drying (CP-VD). With the combination of X-ray diffraction (XRD) and scanning electron microscopy (SEM), it is found that the sample from CP-FD method consists of a pure phase with good crystallinity and small, homogenous particles (100-300 nm) with uniform particle size distribution. Inductively coupled plasma spectroscopy (ICP) shows that the sample has a stoichiometric ratio of n((Li)): n((Mn)): n((Ni)): n((Co))=9: 4: 1: 1; and its Brunauer-Emmett-Teller (BET) specific surface area is 5.749 m(2)g(-1). This sample achieves excellent electrochemical properties: its initial discharge capacities are 298.9 mAhg(-1) at 0.1C (20 mAg(-1)), 246.1 mAhg(-1) at 0.5C, 215.8 mAhg(-1) at 1C, and 154.2 mAhg(-1) at 5C (5C charge and 5C discharge), as well as good cycling performance. In addition, the Li+ chemical diffusion coefficient of Li1.2Mn0.54Ni0.13Co0.13O2 material prepared by the CP-FD method is 4.59 x 10(-11) cm(2) s(-1), which is higher than that of the Li1.2Mn0.54Ni0.13Co0.13O2 material prepared by CP-VD. This phenomenon illustrates the potential for Li1.2Mn0.54Ni0.13Co0.13O2 with good rate performance synthesized by CP-FD method.

36 MATERIALS SCIENCE↗

Effect of Irradiation on Strengthening of a Model Fe-9Cr Oxide Dispersion Strengthened Alloy

The growing energy demand will increasingly call upon advanced nuclear reactors to supply safe and reliable energy worldwide. However, structural and cladding materials in these reactors will be subject to extreme conditions of up to a few hundred displacements per atom (dpa) at temperatures as high as 600 deg. C. Oxide dispersion strengthened (ODS) alloys are leading candidates for these components because their dispersion of Y-Ti-O nanoclusters provides high strength at elevated temperatures and dimensional stability under irradiation. But recent work has suggested that the oxides are unstable under irradiation, which has serious implications on mechanical performance. Thus, the objective of this work is to understand the change in strengthening mechanisms of an Fe-9Cr ODS alloy under irradiation. We use two approaches to assess strengthening of a proton-irradiated and neutron-irradiated Fe-9Cr ODS. First, nanoindentation directly measures changes in yield strength. Second, microstructure measurements are passed through models of two strengthening mechanisms. Results of these two approaches are compared to infer the strengthening mechanisms in the irradiated ODS alloy. A model Fe-9Cr ODS steel was irradiated to 3 dpa at 500 deg. C using either 2.0 MeV protons or a fast neutron spectrum. Both irradiation types induced the formation of dislocation loops and voids. Both proton and neutron irradiation resulted in dissolution of oxide nanoclusters, though neutron irradiation led to much more extensive oxide nano-cluster dissolution. The irradiated microstructure was used to predict irradiation hardening by considering both the precipitation strengthening and solid solution strengthening mechanisms. Due to more extensive oxide nano-cluster dissolution under neutron irradiation, the solid solution strengthening mechanism must be considered in order for the predicted change in yield strength to be comparable to that measured by nanoindentation. (authors)

36 MATERIALS SCIENCE↗

Creep-induced microstructural evolution in a nickel-based superalloy designed for advanced ultra-supercritical boilers

Highlights: • Microstructural evolution of a nickel-based superalloy during long-term creep was investigated. • Precipitate-free zones (PFZs) widely arose near the grain boundary under stress. • The coarsened and elongated particles in the PFZs were identified as γ′ precipitates. • The boundary movement plays a role in evolution of grain boundary precipitates. - Abstract: Long-term microstructural stability is a major concern for candidate materials used in advanced ultra-supercritical (A-USC) power plants. In the present work, precipitation behavior of a nickel based superalloy designed for A-USC boilers, with a base composition of Ni-25Cr-20Co, was investigated during long-term thermal exposure under different stresses at 1043 K. The results showed that the coarsening of γ′ precipitates in the grain interior had occurred during thermal exposure in the presence and absence of stress. The microstructure around grain boundary was altered remarkably under stress. The precipitate-free zones (PFZs) commonly existed near the grain boundary in the gauge sections of specimens after long-term creep. Coarsened and elongated particles in the PFZs were identified as γ′-Ni{sub 3} (Ti, Al) precipitates by chemical composition analysis and diffraction pattern. Furthermore, the morphology and distribution of MC-type carbides have no significant changes observed due to their good stability, but discontinuous M{sub 23}C{sub 6} appeared under stress, due to formation of PFZs resulting in dissolution of the adjacent M{sub 23}C{sub 6}. Besides, the creep-rupture mechanism was discussed to explore a potential approach for improving creep properties.

36 MATERIALS SCIENCE↗

Assessment of retrogression and re-aging treatment on microstructural and mechanical properties of Al-Zn-Mg-Cu P/M alloy

In order to understand the importance of the retrogression and re-aging as a heat treatment for improving microstructural and mechanical properties of the Al-Zn-Mg-Cu powder metallurgy alloys, Al-Zn-Mg-Cu-Fe-Cr alloys were fabricated from the elemental powders. Green compacts are compressed under compaction pressure about 370 MPa. The sintering process carried out for the samples of aluminum alloys at temperature was 650°C under argon atmosphere for two hours. The sintered compacts were subjected into homogenizing condition at 470°C for 1.5 hours and then aged at 120°C for 24 hours (T6 temper) after that it carried out the retrogressed at 180°C for 30 min., and then re-aged at 120°C for 24 hours (RRA). Observations microstructures were examined using optical, scanning electron microscopy coupled with energy dispersive spectroscopy and X-ray diffraction. Density and porosity content was conducted for the samples of alloys. The result showing that the highest Vickers hardness exhibited for an Al-Zn-Mg-Cu alloy after underwent the retrogression and reaging treatment. Increasing in hardness was because of the precipitation hardening through precipitate the (Mg Zn) and (Mg{sub 2}Zn{sub 11}) phases during matrix of aluminum-alloy.

36 MATERIALS SCIENCE↗

Multi-scale processes driving tropical convection and influence of the aerosol (Final Technical Report)

This DOE GoAmazon collaborative project between scientists in the US and Brazil addresses fundamental processes that drive tropical deep convection including aerosol effects. The results provide guidance for improving the parameterizations of cloud and aerosol effects by increasing the knowledge of processes at work in tropical convection, especially over tropical land. Highlights include: • GoAmazon2014/5 observations permitted, for the first time, a comprehensive evaluation of the strong relationship between lower free tropospheric moisture and deep convective onset over the Amazon (Schiro et al. 2016, JAS; Schiro et al. 2018b, PNAS; Chakraborty et al. 2018, ACP; Schiro and Neelin 2018c). A set of diagnostics for deep convective onset has been established using data from the GoAmazon2014/5 campaign (Schiro et al. 2016, JAS), highlighting similarities and differences between the convective transition statistics over tropical land versus corresponding statistics from ARM campaigns in the tropical Western Pacific. The initial set of diagnostics has been provided as a module to be incorporated into the ARM Diagnostics Package of Shaocheng Xie and coworkers, which is being integrated into the PCMDI and E3SM diagnostics packages. Additionally, a set of downdraft diagnostics to inform model parameterizations has been developed (Schiro and Neelin 2018a, ACP). • These diagnostics have been used in constraining the behavior of modeled convective parameterizations. This includes using them with parameter perturbation experiments in the Community Earth System Model to show which parameter ranges are consistent with observed onset statistics, and to show that the primary causal direction of the water vapor-precipitation relationship is via the impact of mixing processes and free tropospheric moisture on convection (Kuo et al. 2017, JAS). Lintner et al. (2017, GRL) used this impact of free tropospheric moisture to systematically analyze issues in the simulation of Amazon rainfall in the CMIP5 model ensemble. • Leveraging the multi-instrument GoAmazon observations, Schiro et al. (2018, PNAS) are able to provide for the first time an empirical mixing using radar wind profiler data that provides a good predictor of precipitation for both mesoscale convective systems and smaller-scale convection. In addition, buoyancy estimated from these results is a good predictor of precipitation across the seasonal and diurnal cycles (Schiro and Neelin 2018c, JAS) and permits the effects of aerosols to be distinguished from those of the thermodynamic environment in the transition to deep convection (Chakraborty et al. 2018, ACP). • Placing the GoAmazon campaign in a larger context, in collaboration with U. São Paulo investigators, Rehbein et al. (2018) analyzed the characteristics of the mesoscale convective systems (MCS) that affect Amazon rainfall, including origins, lifetimes, propagation speed and displacement. de Barros Soares et al. (2017) establish statistically significant observed warming trends over much of South America and are able to attribute the origin of this to anthropogenic forcing based on the agreement of climate model simulations with and without anthropogenic forcings. This analysis left open the attribution of precipitation trends due to large natural variability. Barkhardorian et al. (2018) provide evidence indicating that the observed regional precipitation decrease and drying during recent over northern South America during recent austral springs will continue and intensify in the course of unfolding anthropogenic climate change.

54 ENVIRONMENTAL SCIENCES↗

Evaluating soil moisture feedback on convective triggering: Roles of convective and land–model parameterizations

Feedbacks between soil moisture and convective precipitation are not well represented in current Earth system models, and can affect projections of drought and heavy-precipitation extremes. To explore the atmospheric and land-surface influences on the initiation (triggering) of daytime deep convection, single-column model experiments were performed using the NCAR Community Earth System Model (CESM1.2), over the U.S. Southern Great Plains. The results indicate that the positive and negative feedback mechanisms found in earlier studies (using simplified boundary-layer models) are robust to large-scale forcing and interactions between boundary-layer turbulence, cloud dynamics, and radiation. However, systematic responses of convective triggering to soil moisture emerged only after switching from a convective available potential energy-based to a convective inhibition energy-based convective parameterization. This suggests that the choice of convective mass-flux closure largely determines the sensitivity of parameterized convective clouds to land-surface state. Errors in land-model parameterizations of evapotranspiration also affect the probability of deep convection, with vegetation (transpiration) playing an important role in linking soil moisture to surface energy partitioning and clouds. Parameterizations that permit the triggering feedback mechanism better predict the statistics of daytime shallow and deep convection, with respect to observations from the Atmospheric Radiation Measurement site in the Southern Great Plains. Here, the results illustrate how errors in the representation of evapotranspiration in land-surface models can propagate through the chain of coupled land-atmosphere processes to affect convective clouds.

54 ENVIRONMENTAL SCIENCES↗

Formation of Supercooled Liquid Solutions from Nanoscale Amorphous Solid Films of Methanol and Ethanol

Molecular beam techniques are used to create layered nanoscale composite films of amorphous methanol and ethanol at 20 K. The films are then heated and temperature programmed desorption (TPD) and FTIR spectroscopy are used to observe the mixing, desorption, and crystallization behavior from the initially unmixed amorphous layers. We find that after heating above Tg, the layers completely intermix to form a deeply supercooled liquid solution. Modeling of the desorption kinetics shows that the supercooled liquid films behave as ideal solutions. Deviations from ideal solution desorption behavior are observed when the metastable supercooled solution remains for longer times in regions of the phase diagram where crystallization is thermodynamically favorable. In those cases, the finite lifetime of the metastable solutions results in the precipitation of crystalline solids. Finally, in very thick films at temperatures and compositions where a stable liquid should exist, we unexpectedly observe deviations from ideal solution behavior. Visual inspection of the sample indicates that these apparent departures from ideality arise from dewetting of the liquid film from the substrate. We conclude that compositionally tailored nanoscale amorphous films provide a useful means for preparing and examining deeply-supercooled solutions in metastable regions of the phase diagram.

10 SYNTHETIC FUELS↗

Impact of KOH on the interfacial precipitation rates of C-S-H during the early hydration of C3S

In this work we investigated the influence of alkalis on the hydration of two triclinic samples of C{sub 3}S. One pure C{sub 3}S and one Al-doped C{sub 3}S (0.5 wt.‐% Al{sub 2}O{sub 3}). We added differently concentrated KOH solutions representing alkalis in the pore solution, which lead to an increase of the interfacial precipitation rates of C-S-H during the hydration of C{sub 3}S compared to the hydration without KOH. Isothermal calorimetry was conducted for the determination of the rates of reaction during the hydration process and ICP-OES measurements for the determination of the pore solution composition at certain times of hydration. The increasing effect of KOH solution on the calculated interfacial precipitation rates from pore solution data can explain the enhancement of the rates of reaction recorded by heat flow calorimetry during the early hydration. Therefore, the interfacial precipitation rates of C-S-H can accurately describe the acceleration effect of alkalis on the early hydration of C{sub 3}S.

36 MATERIALS SCIENCE↗

Continuous laser irradiation under ambient conditions: A simple way for the space-selective growth of gold nanoparticles inside a silica monolith

Highlights: {yields} Visible continuous laser direct-write gold nanoparticles inside a silica monolith. {yields} The presence of the additive (Na{sub 2}CO{sub 3}) is not necessary to the growth of gold nanoparticles. {yields} A simple heat treatment leads to precipitation of gold nanoparticles inside the silica matrices with, or without, the additive. {yields} The local precipitation of gold nanoparticles by continuous photo-irradiation occurs following a photo-thermal activated mechanism. -- Abstract: Thanks to the potential and various applications of metal-dielectric nanocomposites, their syntheses constitute an interesting subject in material research. In this work, we demonstrate the achievement of gold nanocrystals growth through a visible and continuous laser irradiation. The in situ and direct space-selective generation of metallic nanoparticles is localized under the surface within transparent silica monoliths. For that purpose, the porous silica monoliths are prepared using a sol-gel route and post-doped with gold precursors before the irradiation. The presence of Au nanoparticles inside the irradiated areas was evidenced using absorption spectroscopy, X-ray diffraction analysis and transmission electron microscopy. The comparison between the results obtained after a laser irradiation and by a simple heat-treatment reveals that the local precipitation of gold nanoparticles by continuous photo-irradiation occurs following a photo-thermal activated mechanism.

36 MATERIALS SCIENCE↗

Aging effects on the mechanical properties of alumina-forming austenitic stainless steels

Isothermal aging and tensile evaluation were conducted for recently developed alumina-forming austenitic stainless steels (AFAs). Microstructural observation reveals that NiAl-type B2 and Fe{sub 2}(Mo,Nb)-type Laves phase precipitates form as dominant second phases in the austenitic matrix during aging at 750 C. At room temperature these precipitates increase the strength but decrease the ductility of the AFA alloys. However, when tested at 750 C, the AFA alloys did not show strong precipitation hardening by these phases, moreover, the elongation to fracture was not affected by aging. Fracture surface and cross-sectional microstructure analysis after tensile testing suggests that the difference of mechanical behaviors between room temperature and 750 C results from the ductile-brittle transition of the B2 precipitates. At room temperature, B2 precipitates are strong but brittle, whereas they become weak but ductile above the ductile-brittle transition temperature (DBTT).

36 MATERIALS SCIENCE↗

Investigating Hydrometeorological Conditions Associated with Increasing Dust Events in Southwestern United States

A recent study (Tong et al. 2017) shows a rapid intensification of dust storm activity over the southwestern United States in the past decades. For example, the frequency of windblown dust storms has increased 240 percent from 1990s to 2000s. Increasing dust storms can worsen air quality in the region. The study also finds that the intensification of dust events has a close connection with a fast-rising infectious disease (valley fever) caused by inhaling soil-dwelling fungi (Coccidioides immitis and C. posadasii) in the southwestern United States. Hydrometeorological conditions play an important role in dust storm activity, including winds, precipitation, soil moisture, atmospheric boundary stability, land surface types, etc. In this presentation, we describe our preliminary results of linking the dust trends to variations of hydrometeorological conditions at regional and global scales, using a number of Earth observations, including products from NLDAS (North American Land Data Assimilation System), TRMM (Tropical Rainfall Measuring Mission), and MERRA (Modern Era Retrospective-analysis for Research and Applications) datasets, from NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC). The GES DISC, one of the 12 NASA data centers, is home to multidisciplinary data archives such as precipitation, hydrology, atmospheric chemistry, atmospheric dynamics, etc. We demonstrate that multidisciplinary datasets and services at GES DISC can be used for interdisciplinary investigation to understand the interactions of Earth system components from an observational perspective.

satellite↗

Microbial Activity and Precipitation at Solution-Solution Mixing Zones in Porous Media (Final Report)

The use of biological and chemical processes that degrade or immobilize contaminants in subsurface environments is a cornerstone of remediation technology. The enhancement of biological and chemical processes in situ, involves the transport, displacement, distribution and mixing of one or more reactive agents. Biological and chemical reactions all require diffusive transport of solutes to reaction sites at the molecular scale and accordingly, the success of processes at the meter-scale and larger is dictated by the success of phenomena that occur at the micron-scale. However, current understanding of scaling effects on the mixing and delivery of nutrients in biogeochemically dynamic porous media systems is limited, despite the limitations this imposes on the efficiency and effectiveness of the remediation challenges at hand. We therefore proposed to experimentally characterize and computationally describe the growth, evolution, and distribution of microbial activity and mineral formation as well as changes in transport processes in porous media that receive two or more reactive amendments. The model system chosen for this project was based on a method for immobilizing 90 Sr, which involves stimulating microbial urea hydrolysis with ensuing mineral precipitation (CaCO 3 ), and co-precipitation of Sr. Studies at different laboratory scales were used to visualize and quantitatively describe the spatial relationships between amendment transport and consumption that stimulate the production of biomass and mineral phases that subsequently modify the permeability and heterogeneity of porous media. Biomass growth, activity, and mass deposition in mixing zones was investigated using two-dimensional micro-model flow cells as well as flow cells that could be analyzed using synchrotron-based x-ray tomography. Larger-scale flow-cell experiments were conducted where the spatial distribution of media properties, flow, segregation of biological activity and impact on ancillary constituents (i.e., Sr) was determined. Model simulations accompanied the experimental efforts. The research contributed towards defining the key physical, chemical, and biological processes influencing the form and mobility of DOE priority contaminants (e.g., 60 Co, 90 Sr, U) in the subsurface. The work conducted and reported herein, will in the future (i) contribute to controlling the juxtaposition of microbial activity, contaminants and amendments, (ii) promote new strategies for delivering amendments, and (iii) allow new approaches for modifying permeability and flow in porous media. We feel that the work has already translated directly to improving the efficiency of amendment based remediation strategies. The results of the project have been published in a number of peer reviewed journal articles. The abstracts and citations to those articles, given in section 2.0 below, make up the bulk of this final report.

42 ENGINEERING↗