Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Transient particle acceleration in strongly magnetized neutron stars

Although several reasonable physical processes have been proposed to account for the initial energy release in transient events on strongly magnetized neutron stars, and although the manifestation of this activity as a burst of X- or gamma-radiation evidently results from the Compton upscattering of soft photons by relativistic electrons, a self-consistent picture for the particle acceleration itself is lacking. Here, a detailed model is developed in which sheared Alfven waves generated by the energized stellar crust (e.g., due to a starquake) accelerate the changes to large Lorentz factors. For canonical stellar parameters and a burst energy of about 10 to the 37th ergs, the maximum attainable Lorentz factor is gamma(max) 50m, where m (of about 2-3/cm) characterizes the shear of the magnetic perturbation. This value of gamma(max) is consistent with the particle energy required to produce the most energetic gamma-rays (of about 10-100 MeV) observed in gamma-ray bursts.

Melia, Fulvio↗
DOE OSTI2016

Characterization of compact-toroid injection during formation, translation, and field penetration

We have developed a compact toroid (CT) injector system for particle refueling of the advanced beam-driven C-2U field-reversed configuration (FRC) plasma. The CT injector is a magnetized coaxial plasma gun (MCPG), and the produced CT must cross the perpendicular magnetic field surrounding the FRC for the refueling of C-2U. To simulate this environment, an experimental test stand has been constructed. A transverse magnetic field of ∼1 kG is established, which is comparable to the C-2U axial magnetic field in the confinement section, and CTs are fired across it. On the test stand we have been characterizing and studying CT formation, ejection/translation from the MCPG, and penetration into transverse magnetic fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2014

Origins and Distribution of Chondritic Olivine Inferred from Wild 2 and Chondrite Matrix

To date, only 180 particle impact tracks from Wild 2 have been extracted from the Stardust aerogel collector and even fewer have been thoroughly characterized. In order to provide a cohesive compositional dataset that can be compared to the meteorite record, we have made both major and minor element analyses (TEM/EDXS) of olivine and low-Ca pyroxene for 39 particles harvested from 26 tracks. However, the dearth of equivalent analyses for these phases in chondrite matrix hinders their comparison to the Wild 2 samples. To properly permit comparison of chondritic olivine and pyroxene to the Wild 2 samples, we have also provided a large, comprehensive EPMA dataset (greater than10(exp 3) analyses) of analogous grains (5-30 micrometers) isolated in L/LL3.0-4, CI, CM, CR, CH, CO, CV, Acfer 094, EH3, EL6, and Kakangari matrix

Frank, D. R.↗
DOE OSTI2020

Complex plant-derived organic aerosol as ice-nucleating particles – more than the sums of their parts?

Quantifying the impact of complex organic particles on the formation of ice crystals in clouds remains challenging, mostly due to the vast number of different sources ranging from sea spray to agricultural areas. In particular, there are many open questions regarding the ice nucleation properties of organic particles released from terrestrial sources such as decaying plant material. In this work, we present results from laboratory studies investigating the immersion freezing properties of individual organic compounds commonly found in plant tissue and complex organic aerosol particles from vegetated environments, without specifically investigating the contribution from biological particles, which may contribute to the overall ice nucleation efficiency observed at high temperatures. To characterize the ice nucleation properties of plant-related aerosol samples for temperatures between 242 and 267 K, we used the Aerosol Interaction and Dynamics in the Atmosphere (AIDA) cloud chamber and the Ice Nucleation SpEctrometer of the Karlsruhe Institute of Technology (INSEKT), which is a droplet freezing assay. Individual plant components (polysaccharides, lignin, soy and rice protein) were mostly less ice active, or similarly ice active, compared to microcrystalline cellulose, which has been suggested by recent studies to be a proxy for quantifying the primary cloud ice formation caused by particles originating from vegetation. In contrast, samples from ambient sources with a complex organic matter composition (agricultural soils and leaf litter) were either similarly ice active or up to 2 orders of magnitude more ice active than cellulose. Of all individual organic plant components, only carnauba wax (i.e., lipids) showed a similarly high ice nucleation activity as that of the samples from vegetated environments over a temperature range between 245 and 252 K. Hence, based on our experimental results, we suggest considering cellulose as being representative for the average ice nucleation activity of plant-derived particles, whereas lignin and plant proteins tend to provide a lower limit. In contrast, complex biogenic particles may exhibit ice nucleation activities which are up to 2 orders of magnitude higher than observed for cellulose, making ambient plant-derived particles a potentially important contributor to the population of ice-nucleating particles in the troposphere, even though major uncertainties regarding their transport to cloud altitude remain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

The energy spectra of solar flare electrons

A survey of 50 electron energy spectra from .1 to 100 MeV originating from solar flares was made by the combination of data from two spectrometers onboard the International Sun Earth Explorer-3 spacecraft. The observed spectral shapes of flare events can be divided into two classes through the criteria of fit to an acceleration model. This standard two step acceleration model, which fits the spectral shape of the first class of flares, involves an impulsive step that accelerates particles up to 100 keV and a second step that further accelerates these particles up to 100 MeV by a single shock. This fit fails for the second class of flares that can be characterized as having excessively hard spectra above 1 MeV relative to the predictions of the model. Correlations with soft X-ray and meter radio observations imply that the acceleration of the high energy particles in the second class of flares is dominated by the impulsive phase of the flares.

Evenson, P. A.↗
DOE OSTI2019

Graphene Wrapped FeSe 2 Nano–Microspheres with High Pseudocapacitive Contribution for Enhanced Na–Ion Storage

Pseudocapacitance is a Faradaic process that involves surface or near surface redox reactions. Increasing the pseudocapacitive contribution is one of the most effective means to improve the rate performance of electrode materials. In this study, graphene oxide is used as a template to in situ synthesize burr globule–like FeSe 2 /graphene hybrid (B–FeSe 2 /G) using a facile one–step hydrothermal method. Structural characterization demonstrates that graphene layers not only wrap the surfaces of FeSe 2 particles, but also stretch into the interior of these particles, as a result of which the unique nano–microsphere structure is successfully established. When serving as anode material for Na–ion batteries, B–FeSe 2 /G hybrid displays high electrochemical performance in the voltage range of 0.5–2.9 V. The B–FeSe 2 /G hybrid has high reversible capacity of 521.6 mAh·g –1 at 1.0 A g –1 . Meanwhile, after 400 cycles, high discharge capacity of 496.3 mAh g –1 is obtained at a rate of 2.5 A g –1 , with a high columbic efficiency of 96.6% and less than 1.0% loss of discharge capacity. Even at the ultrahigh rate of 10 A g –1 , a specific capacity of 316.8 mAh g –1 can be achieved. Furthermore, kinetic analyses reveal that the excellent performance of the B–FeSe 2 /G hybrid is largely attributed to the high pseudocapacitive contribution induced by the special nano–micro structure.

25 ENERGY STORAGE↗
DOE OSTI2018

Laser Welding-Brazing of Immiscible AZ31B Mg and Ti-6Al-4V Alloys Using an Electrodeposited Cu Interlayer

Metallurgical bonding between immiscible system AZ31B magnesium (Mg) and Ti-6Al-4V titanium (Ti) was achieved by adding Cu interlayer using laser welding-brazing process. Effect of the laser power on microstructure evolution and mechanical properties of Mg/Cu-coated Ti joints was studied. Visually acceptable joints were obtained at the range of 1300 to 1500 W. The brazed interface was divided into three parts due to temperature gradient: direct irradiation zone, intermediate zone and seam head zone. Ti{sub 3}Al phase was produced along the interface at the direct irradiation zone. Ti-Al reaction layer grew slightly with the increase in laser power. A small amount of Ti{sub 2}(Cu,Al) interfacial compounds formed at the intermediate zone and the (α-Mg + Mg{sub 2}Cu) eutectic structure dispersed in the fusion zone instead of gathering when increasing the laser power at this zone. At the seam head zone, Mg-Cu eutectic structure was produced in large quantities under all cases. Joint strength first increased and then decreased with the variation of the laser power. The maximum fracture load of Mg/Cu-coated Ti joint reached 2314 N at the laser power of 1300 W, representing 85.7% joint efficiency when compared with Mg base metal. All specimens fractured at the interface. The feature of fracture surface at the laser power of 1100 W was characterized by overall smooth surface. Obvious tear ridge and Ti{sub 3}Al particles were observed at the fracture surface with increase in laser power. It suggested atomic diffusion was accelerated with more heat input giving rise to the enhanced interfacial reaction and metallurgical bonding in direct irradiation zone, which determined the mechanical properties of the joint.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Comparison of Experimental Measurements of Thermal Conductivity of Fe{sub 2}O{sub 3} Nanofluids Against Standard Theoretical Models and Artificial Neural Network Approach

In the present work, the practicability of Fe{sub 2}O{sub 3} nanofluids for heat transfer applications has been examined. Nanofluids performance, in terms of modulation of thermal conductivity, has been investigated with increasing concentration of Fe{sub 2}O{sub 3} nanoparticles in water and ethylene glycol base fluids at 10, 20, 30, 40, 50, 60 and 70 °C. Fe{sub 2}O{sub 3} nanoparticles have been synthesized using the wet chemical method and characterized using TEM, SEM, XRD and UV–Vis. The characterization results revealed a face-centered cubic structure having alpha phase and particle size in the range of 40-55 nm for the synthesized Fe{sub 2}O{sub 3} nanoparticles. Thermal conductivity measurement results show increases in thermal conductivity with the increase in concentration and temperature of nanofluids. 16.45 and 19.76% enhancement in thermal conductivity have been observed for Fe{sub 2}O{sub 3}–water and Fe{sub 2}O{sub 3}–ethylene glycol nanofluids of 2 vol.% at 70 °C compared to water and ethylene glycol base fluids at 10 °C, respectively. Results of the ANN approach are in good agreement with experimental results, and H–C model gives better predictions compared to other standard models. The study gives clear insights into improved heat transfer performance by material engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Flame ignition in the counterflow configuration: Reassessing the experimental assumptions

The counterflow configuration is widely used to study experimentally premixed and non-premixed flame ignition, with the advantage being that the data can be modeled using quasi one-dimensional codes. In this study, experiments and direct numerical simulations were carried out in order to assess the validity of the assumptions of the one-dimensional formulation. Experimentally, particle image velocimetry, shadowgraph, and a high-speed camera were employed to characterize the flow field before ignition, and to capture the ignition position and further evolution of the flame. The modeling involved axisymmetric numerical simulations using detailed molecular transport and chemical kinetic models. We report both experiments and simulations revealed that if solid surfaces are present in the vicinity of the jets exit, the flow separates generating recirculation zones that are unstable and result in the bifurcation of the flow field. As a result, for a given set of boundary conditions at the burners’ exits, there exists two possible stable states of the flow field which have different velocity and scalars distribution, and the fuel concentration at which ignition occurs was determined to differ for these two states. A novel approach is proposed to correct for the unavoidable radial non-uniformity of the temperature profile at the exit of the heated jet and the conditions that do not result in bifurcation are outlined, so that the results from one-dimensional codes can be compared to the data with confidence.

42 ENGINEERING↗
DOE OSTI2016

Meso-scale framework for modeling granular material using computed tomography

Numerical modeling of unconsolidated granular materials is comprised of multiple nonlinear phenomena. Accurately capturing these phenomena, including grain deformation and intergranular forces depends on resolving contact regions several orders of magnitude smaller than the grain size. Here, we investigate a method for capturing the morphology of the individual particles using computed X-ray and neutron tomography, which allows for accurate characterization of the interaction between grains. The ability of these numerical approaches to determine stress concentrations at grain contacts is important in order to capture catastrophic splitting of individual grains, which has been shown to play a key role in the plastic behavior of the granular material on the continuum level. Discretization approaches, including mesh refinement and finite element type selection are presented to capture high stress concentrations at contact points between grains. The effect of a grain’s coordination number on the stress concentrations is also investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Manipulation of self-organized multi-vortical states in active magnetic roller suspensions

Ensembles of active magnetic colloids demonstrate complex collective behavior and self-organization when driven out of equilibrium by external magnetic fields. The interplay between magnetic and hydrodynamic interactions often result in spontaneous self-assembly and the emergence of localized vortices in ensembles of ferromagnetic rollers. We report experimental and computational study of the self-organized multi-vortical state in ensembles of magnetic rollers under the imposed external confining potential realized by patterned substrates. We explore the behavior of the system on a substrate patterned with shallow wells ordered in a lattice with square symmetry and lattice spacing smaller than the wells’ diameter. Here we demonstrate, that ensembles of active magnetic rollers evolve in response to changes in the geometry of the confining lattice from a globally correlated state characterized by anti-ferromagnetic vortex ordering to a state with rapidly changing particle flows and self-organized vortical states with a lattice constant larger than one of the confining pattern. Our experimental observations are accompanied by numerical simulations based on phenomenological coarse grained particle dynamics coupled to Navier–Stokes hydrodynamics in shallow water approximation. The reported results provide insights into the collective behavior of active magnetic rollers under confinement and suggest strategies for the manipulation of collective dynamic states in active magnetic liquids.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstrain screening towards defect-less layered transition metal oxide cathodes

Microstrain and the associated surface-to-bulk propagation of structural defects are known to be major roadblocks to developing high-energy and long-life batteries. However, the origin and effects of microstrain during the synthesis of battery materials remain largely unknown. Here, in this study, we perform microstrain screening during real-time and realistic synthesis of sodium layered oxide cathodes. Evidence gathered from multiscale in situ synchrotron X-ray diffraction and microscopy characterization collectively reveals that the spatial distribution of transition metals within individual precursor particles strongly governs the nanoscale phase transformation, local charge heterogeneity and accumulation of microstrain during synthesis. This unexpected dominance of transition metals results in a counterintuitive outward propagation of defect nucleation and growth. These insights direct a more rational synthesis route to reduce the microstrain and crystallographic defects within the bulk lattice, leading to significantly improved structural stability. The present work on microstrain screening represents a critical step towards synthesis-by-design of defect-less battery materials.

25 ENERGY STORAGE↗
DOE OSTI2024

An implicit solution for Asay foil trajectories generated by separable, sustained-production ejecta source models

We present a simple implicit solution for the time-dependent trajectory of a thin Asay foil ejecta diagnostic for the general case where the impinging ejecta cloud is generated by a source function characterized by an arbitrary (sustained) time dependence and a time-independent (stationary) particle velocity distribution. In the limit that the source function time dependence becomes a delta function, this solution—which is amenable to rapid numerical calculations of arbitrary accuracy—exactly recovers a previously published solution for the special case of instantaneous ejecta production. We also derive simple expressions for the free-surface arrival (catch-up) time as well as the true ejecta areal mass accumulation on the accelerating foil and place bounds on the level of error incurred when applying instant-production mass solutions to a sustained-production trajectory. We demonstrate these solutions with example calculations for hypothetical source functions spanning a wide range of ejecta production durations, velocity distributions, and temporal behaviors. These calculations demonstrate how the foil trajectory is often insensitive to the temporal dependence of the source function, instead being dominated by the velocity distribution. We quantify this insensitivity using a “compatibility score” metric. Under certain conditions, one may capitalize upon this insensitivity to obtain a good approximation of the second integral of the velocity distribution from the observed foil trajectory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Hyperheavy spherical and toroidal nuclei: The role of shell structure

The properties of toroidal hyperheavy even-even nuclei and the role of toroidal shell structure are extensively studied within covariant density functional theory. The general trends in the evolution of toroidal shapes in the Z ≈ 130–180 region of the nuclear chart are established for the first time. These nuclei are stable with respect to breathing deformations. The most compact fat toroidal nuclei are located in the Z ≈ 136, N ≈ 206 region of the nuclear chart, but thin toroidal nuclei become dominant with increasing proton number and toward proton and neutron drip lines. The roles of toroidal shell structure, its regularity, supershell structure, and shell gaps as well as the role of different groups of the pairs of the orbitals in its formation are investigated in detail. The lowest in energy solutions at axial symmetry are characterized either by large shell gaps or low density of the single-particle states in the vicinity of the Fermi level in at least one of the subsystems (proton or neutron). Related quantum shell effects are expected to act against the instabilities in breathing and sausage deformations for these subsystems. The investigation with a large set of covariant energy density functionals reveals that substantial proton Z = 154 and 186 and neutron N = 228, 308, and 406 spherical shell gaps exist in all functionals. The nuclei in the vicinity of the combination of these particle numbers form the islands of stability of spherical hyperheavy nuclei. Furthermore, the study suggests that the N = 210 toroidal shell gap plays a substantial role in the stabilization of fat toroidal nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Hyperuniform Structures Formed by Shearing Colloidal Suspensions

In periodically sheared suspensions there is a dynamical phase transition, characterized by a critical strain amplitude $γ_c$, between an absorbing state where particle trajectories are reversible and an active state where trajectories are chaotic and diffusive. Repulsive nonhydrodynamic interactions between “colliding” particles’ surfaces have been proposed as a source of this broken time reversal symmetry. A simple toy model called random organization qualitatively reproduces the dynamical features of this transition. Random organization and other absorbing state models exhibit hyperuniformity, a strong suppression of density fluctuations on long length scales quantified by a structure factor $S(q → 0) ~q^α$ with $\textit{α}$ > 0, at criticality. In this work, we show experimentally that the particles in periodically sheared suspensions organize into structures with anisotropic short-range order but isotropic, long-range hyperuniform order when oscillatory shear amplitudes approach $γ_c$.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Sub-daily virus sampling at the Bermuda Atlantic Time Series reveals diel and depth-structured population dynamics without community-level shifts

Ocean microbes contribute to biogeochemical cycles and ecosystem function, but they do so under top-down pressure imposed by viruses. While viruses are increasingly understood spatially and beginning to be incorporated into predictive modeling, high-frequency ocean virus dynamics remain understudied due to methodological challenges. Here we sampled stratified Bermuda Atlantic Time Series (BATS) waters for 112 hours at sub-daily 4- (surface) or 12- (deep chlorophyll maximum) hour intervals, purified viral particles from these samples, sequenced their metagenomes, and used the resulting data to characterize high-frequency virus community dynamics. Aggregated community diversity metrics changed with depth, but were not statistically significant temporally at a fixed location. However, finer-scale population-level analyses revealed both depth and temporal change, including physicochemical depth-driven differences and, in surface waters, thousands of viral populations that exhibited statistically significant diel rhythms. Statistical analyses revealed three main archetypes of temporal dynamics that themselves differed in abundance patterns, host predictions, viral taxonomy, and gene functions. Among these, highlights include viruses resembling an archetype with a night peaking pattern in activity that include an over-representation of viruses that putatively infect Prochlorococcus, a phototrophic cyanobacteria. Together, these efforts provide baseline community- and population-scale short-time-frame observations relevant to future climate state modeling.

Carrillo, Alfonso [The Ohio State University, Colu↗