Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle Size Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Influence of Measurement Uncertainties on Fractional Solubility of Iron in Mineral Aerosols over the Oceans

The atmospheric supply of mineral dust iron (Fe) plays a crucial role in the Earths biogeochemical cycle and is of specific importance as a micronutrient in the marine environment. Observations show several orders of magnitude variability in the fractional solubility of Fe in mineral dust aerosols, making it hard to assess the role of mineral dust for the global ocean biogeochemical Fe cycle. In this study we compare the operational solubility of mineral dust aerosol Fe associated with the flow-through leaching protocol to the results of the global 3-D chemical transport model GEOS-Chem. According to the protocol, aerosol Fe is defined as soluble by first deionized water leaching of mineral dust through a 0.45 m pore size membrane followed by acidification and storage of the leachate over a long period of time prior to analysis. To estimate the uncertainty in soluble Fe results introduced by the flow-through leaching protocol, we prescribe an average 50 (range of 30 to 70) fractional solubility to sub-0.45 m sized mineral dust particles that may inadvertently pass the filter and end up in the acidified (at pH1.7) leachate for a couple of month period. In the model, the fractional solubility of Fe is either explicitly calculated using a complex mineral aerosol Fe dissolution module, or prescribed to be 1 and 4. Calculations show that the fractional solubility of Fe derived through the flow-through leaching is higher compared to the model results. The largest differences (40) are predicted to occur farther away from the dust source regions, over the areas where sub-0.45 m sized mineral dust particles contribute a larger fraction of the total mineral dust mass. This study suggests that different methods used in soluble Fe measurements and inconsistences in the operational definition of filterable Fe in marine environment and soluble Fe in atmospheric aerosols are likely to contribute to the wide range of fractional solubility of aerosol Fe reported in the literature.

Soluble Iron↗

Integration of Feedstock Assembly System and Cellulosic Ethanol Conversion Models to Analyze Bioenergy System Performance

Research barriers continue to exist in all phases of the emerging cellulosic ethanol biorefining industry. These barriers include the identification and development of a sustainable and abundant biomass feedstock, the assembly of viable assembly systems formatting the feedstock and moving it from the field (e.g., the forest) to the biorefinery, and improving conversion technologies. Each of these phases of cellulosic ethanol production are fundamentally connected, but computational tools used to support and inform analysis within each phase remain largely disparate. This paper discusses the integration of a feedstock assembly system modeling toolkit and an Aspen Plus® conversion process model. Many important biomass feedstock characteristics, such as composition, moisture, particle size and distribution, ash content, etc. are impacted and most effectively managed within the assembly system, but generally come at an economic cost. This integration of the assembly system and the conversion process modeling tools will facilitate a seamless investigation of the assembly system conversion process interface. Through the integrated framework, the user can design the assembly system for a particular biorefinery by specifying location, feedstock, equipment, and unit operation specifications. The assembly system modeling toolkit then provides economic valuation, and detailed biomass feedstock composition and formatting information. This data is seamlessly and dynamically used to run the Aspen Plus® conversion process model. The model can then be used to investigate the design of systems for cellulosic ethanol production from field to final product.

09 BIOMASS FUELS↗

Relationship between recycling rate and air pollution: Waste management in the state of Massachusetts

Highlights: • This study examines the relationship between recycling rate of solid waste and air pollution. • Fixed effects Stochastic Frontier Analysis model with panel data are employed. • The case study is a waste municipality survey in the state of Massachusetts during 2009–2012. • The findings support that a negative relationship between air pollution and recycling. - Abstract: This study examines the relationship between recycling rate of solid waste and air pollution using data from a waste municipality survey in the state of Massachusetts during the period 2009–2012. Two econometric approaches are applied. The first approach is a fixed effects model, while the second is a Stochastic Frontier Analysis (SFA) with fixed effects model. The advantage of the first approach is the ability of controlling for stable time invariant characteristics of the municipalities, thereby eliminating potentially large sources of bias. The second approach is applied in order to estimate the technical efficiency and rank of each municipality accordingly. The regressions control for various demographic, economic and recycling services, such as income per capita, population density, unemployment, trash services, Pay-as-you-throw (PAYT) program and meteorological data. The findings support that a negative relationship between particulate particles in the air 2.5 μm or less in size (PM{sub 2.5}) and recycling rate is presented. In addition, the pollution is increased with increases on income per capita up to $23,000–$26,000, while after this point income contributes positively on air quality. Finally, based on the efficiency derived by the Stochastic Frontier Analysis (SFA) model, the municipalities which provide both drop off and curbside services for trash, food and yard waste and the PAYT program present better performance regarding the air quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rapid Debris Analysis Project Task 3 Final Report - Sensitivity of Fallout to Source Parameters, Near-Detonation Environment Material Properties, Topography, and Meteorology

This report describes the sensitivity of predicted nuclear fallout to a variety of model input parameters, including yield, height of burst, particle and activity size distribution parameters, wind speed, wind direction, topography, and precipitation. We investigate sensitivity over a wide but plausible range of model input parameters. In addition, we investigate a specific example with a relatively narrow range to illustrate the potential for evaluating uncertainties in predictions when there are more precise constraints on model parameters.

58 GEOSCIENCES↗

Analysis of spectrophotometric observations of Venus in the 3-4 micron region

Spectrophotometric data of Venus in the 3-4 micron region are analyzed in the context of current ideas concerning cloud properties. The results show that a homogeneous cloud model, using a unimodal particle size distribution compatible with the results of previous polarization studies, cannot satisfactorily explain the infrared observations. Assuming a composition of 75% H2SO4, agreement is possible if an upper layer of smaller particles is added to the homogeneous cloud. This inhomogeneous cloud structure, however, is not in agreement with the polarization results. Other models, involving bimodal particle size distributions, were also unsuccessful in explaining both sets of observations in a consistent manner.

Martonchik, J. V.↗

Refinement of Mg{sub 2}Si reinforcement in a commercial Al–20%Mg{sub 2}Si in-situ composite with bismuth, antimony and strontium

Refinement by addition elements of Al–Mg{sub 2}Si alloys is known to result in a change of primary Mg{sub 2}Si morphology. In this paper, the effects of Bi, Sb and Sr on the characteristic parameters of Al–20%Mg{sub 2}Si in-situ composite have been investigated by computer aided cooling curve thermal analysis and microstructural inspection. Size, density and aspect ratio measurements showed that additions of 0.4 wt.% Bi, 0.8 wt.% Sb and 0.01 wt.% Sr refined the Mg{sub 2}Si reinforcement. Exceeding these concentrations, however, resulted in coarsening of Mg{sub 2}Si particles with no change in the morphology. The results also showed that addition elements caused a decrease in the nucleation and growth temperatures of Mg{sub 2}Si particles. The refining effect of Bi, Sb and Sr is likely to be related to the effect of oxide bifilms suspended in the composite melt as favored nucleation substrates for Mg{sub 2}Si particles. - Highlight: • 0.4 wt.%, 0.8 wt.% and 0.01 wt.% is the optimum content for Bi, Sb and Sr addition. • Exceeding optimum concentration resulted in the coarsening of reinforcements. • Nucleation and growth temperatures decrease with addition of Bi, Sb and Sr. • The refining effect of Bi, Sb and Sr is likely to be related to the oxide bifilms.

36 MATERIALS SCIENCE↗

Photoconductivity in reactively evaporated copper indium selenide thin films

Copper indium selenide thin films of composition CuInSe{sub 2} with thickness of the order of 130 nm are deposited on glass substrate at a temperature of 423 ±5 K and pressure of 10{sup −5} mbar using reactive evaporation, a variant of Gunther's three temperature method with high purity Copper (99.999%), Indium (99.999%) and Selenium (99.99%) as the elemental starting materials. X-ray diffraction (XRD) studies shows that the films are polycrystalline in nature having preferred orientation of grains along the (112) plane. The structural type of the film is found to be tetragonal with particle size of the order of 32 nm. The structural parameters such as lattice constant, particle size, dislocation density, number of crystallites per unit area and strain in the film are also evaluated. The surface morphology of CuInSe{sub 2} films are studied using 2D and 3D atomic force microscopy to estimate the grain size and surface roughness respectively. Analysis of the absorption spectrum of the film recorded using UV-Vis-NIR Spectrophotometer in the wavelength range from 2500 nm to cutoff revealed that the film possess a direct allowed transition with a band gap of 1.05 eV and a high value of absorption coefficient (α) of 10{sup 6} cm{sup −1} at 570 nm. Photoconductivity at room temperature is measured after illuminating the film with an FSH lamp (82 V, 300 W). Optical absorption studies in conjunction with the good photoconductivity of the prepared p-type CuInSe{sub 2} thin films indicate its suitability in photovoltaic applications.

36 MATERIALS SCIENCE↗

Hydrogen response of porous palladium nano-films

Palladium nanoparticles were synthesized by reducing sodium tetrachloropalladate at 100°C using Ethylene Glycol as reducing agent. The nanoparticles were characterized by TEM (Transmission Electron Microscopy), and optical absorption spectroscopy. The average particle size (<10 nm) was obtained from TEM images, and the palladium SPR (Surface Plasmon Resonance) absorption maxima was observed at ∼220 nm. The porous sensing films were prepared by drying the nanoparticles precipitate on cleaned glass substrates. The high porosity of these films, as revealed by Atomic Force Microscopy (AFM) studies, made these films suitable for hydrogen sensor applications. The resistance of the films, measured by making silver paste contacts on the porous surface, changed upon exposure to 1000 ppm hydrogen in nitrogen. Optimum sensor response was obtained at 50°C, beyond which it deteriorated. The total response comprising of initial rise and subsequent fall in resistance, is due to the formation of Pd-hydrides (whose resistivity is higher relative to Pd), and closure of interparticle gaps due to lattice expansion of palladium, respectively. A detailed analysis of the results based on the sensing mechanism has been discussed in the paper.

36 MATERIALS SCIENCE↗

Interpretation of the Moessbauer Spectra of the Magnetic Nanoparticles in Mouse Spleen

We have developed a stochastic model for description of relaxation effects in the system of homogeneously magnetized single-domain particles and applied the model to the analysis of Moessbauer spectra of magnetic nanoparticles (Chemicell ARA) and mouse spleen after i.v. injection into animals. We estimate that the fraction of exogenous iron in nanoparticles in the mouse spleen 3 months after injection was 0.27{+-}0.03. The spectra of the residual nanoparticles in the spleen had almost the same isomer shift but smaller mean hyperfine magnetic field values indicating decrease in the magnetic anisotropy energy (size) of the particles compared to the initial ones in the course of biodegradation. Concentration of ferritin-like iron was about three-fold higher than that in the spleen of untreated animals showing ferritin-like forms in the mouse spleen.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Biosynthesis of amorphous mesoporous aluminophosphates using yeast cells as templates

Graphical abstract: Display Omitted Highlights: ► Amorphous aluminophosphates can take place using yeast as template. ► A mesoporous material was obtained. ► The specific surface area after calcinations ranged between 176 and 214 m{sup 2} g{sup −1}. -- Abstract: In this study aluminophosphates have been synthesized from aluminum isopropoxide and phosphoric acid solutions using yeast cells as template. The physicochemical characterization was carried out by thermogravimetric analysis; X-ray diffraction; Fourier transform infrared; N{sub 2} adsorption–desorption isotherms; scanning electron microscopy; transmission electron microscopy and potentiometric titration with N-butylamine for determination of: thermal stability; crystalline structure; textural properties; morphology and surface acidity, respectively. The calcined powders consisted of an intimate mixture of amorphous and crystallized AlPO particles with sizes between 23 and 30 nm. The average pore size observed is 13–16 nm and the specific surface area after calcinations (at 650 °C) ranged between 176 and 214 m{sup 2} g{sup −1}.

36 MATERIALS SCIENCE↗

Phase diagrams and Hofstadter butterflies in the strongly correlated bosonic systems on the lattices with Dirac points

Gauge potentials with different configurations have been recently realized in the optical lattice experiments. It is remarkable that one of the simplest gauge potential can generate particle energy spectrum with the self-similar structure known as a Hofstadter butterfly. We investigate theoretically the impact of strong on-site interaction on such a spectrum in the bosonic Mott insulator within Bose–Hubbard model. In particular, it is shown that the fractal structure is encoded in the quasi-particle and hole bosonic branches for different lattice backgrounds. For example a square lattice and other structures (brick-wall and staggered magnetic flux lattice) which contain Dirac points in energy dispersions are considered. This shows that single-particle physics is still present even in the strong interaction limit for whole Hofstadter spectrum. Additionally we observe, that although in brick-wall and staggered flux lattices the quasi-particle densities of states look qualitatively similar, the corresponding Hofstadter butterfly assumes different forms. In particular, we use a superposition of two different synthetic gauge fields which appears to be a generator of non-trivial phenomena in the optical lattice systems. We also discuss the consequences of these phenomena on the phase diagrams between bosonic Mott insulator and superfluid phase. The analysis is carried out within the strong coupling expansion method on the finite size lattices and also at finite temperatures which are relevant for the currently made experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aerosol Vacuum-Assisted Plasma Ionization (Aero-VaPI) Coupled to Ion Mobility-Mass Spectrometry

In this communication, we report on the real-time analysis of organic aerosol particles by Vacuum-assisted Plasma Ionization-Mass Spectrometry (Aero-VaPI-MS) using a home-built VaPI ion source coupled to a Synapt G2-S HDMS ion mobility-mass spectrometry (IM-MS) system. Standards of organic molecules of interest in prebiotic chemistry were used to generate aerosols. Monocaprin and decanoic acid aerosol particles were successfully detected in both the positive and negative ion modes, respectively. A complex aerosol mixture of different sizes of polymers of L-malic acid was also examined through ion mobility (IM) separations, resulting in the detection of polymers of up to eight monomeric units. This noncommercial plasma ion source is proposed as a low cost alternative to other plasma ionization platforms used for aerosol analysis, and a higher-performance alternative to more traditional aerosol mass spectrometers. VaPI provides robust online ionization of organics in aerosols without extensive ion activation, with the coupling to IM-MS providing higher peak capacity and excellent mass accuracy. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Metal Phosphide Nanoparticles Generated via a Molecular Precursor Route for Hydrotreatment of Methyl Laurate

Transition metal phosphide nanoparticles supported on silica were used as catalysts to investigate the hydrodeoxygenation of methyl laurate (used as a model compound for vegetable oils). Ni 2 P, Ni 1 Mo 1 P, and Ni 1.6 Mo 0.4 P were synthesized using a molecular precursor route. The nanoparticles were added to the silica support without any changes in their structure or particle size. As a reference and for comparison, MoP/SiO 2 was also prepared by the phosphite method. The prepared catalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, and chemical analysis. A higher conversion is reached with the MoP/SiO 2 monometallic catalyst, close to that with Ni 1 Mo 1 P/SiO 2 . However, this observation is misleading because the differences in dispersion obscure the result that the intrinsic activity (turnover frequency) of the bimetallic catalyst, prepared by a molecular precursor route, is significantly higher than that of the monometallic catalyst, prepared by the phosphite route, revealing a synergistic effect on the catalytic activity due to the formation of the bimetallic phosphide.

09 BIOMASS FUELS↗

Aerosol emissions from water-lean solvents for post-combustion CO 2 capture

Advanced water-lean solvents (WLS) for post-combustion CO 2 capture have been gaining interest due to their ability to reduce the parasitic penalty from energy needed for solvent regeneration. Commercial implementation of these novel CO 2 capture technologies hinges on successful control of amine emissions. RTI conducted a parametric study of fundamental and operational variables influence on overall amine aerosol and vapor emissions from our water-lean solvent eCO 2 Sol™ using our 6-kW equivalent bench-scale gas absorption system. The parametric testing used a simulated flue gas with 15 % CO 2 , 2.3–4.2 % H 2 O, and 0–6 ppm sulfite (SO 3 ) to examine the impact of the presence of aerosols to the capture performance and amine emissions from the system. The SO 3 reacts with water in the flue gas to create H 2 SO 4 , which forms liquid aerosol droplets and provide nucleation sites for growth of aerosols. Scanning Mobility Particle Sizer and Aerodynamic Particle Sizer instruments monitored the aerosol particle size distribution. Parametric testing results suggested that the presence of the aerosols in the flue gas could increase the overall amine emissions by 10X compared to the baseline emissions from WLS’s vapor pressure. Principal component analysis (PCA) and projection to latent squares (PLS) developed models to predict the aerosol-based amine emissions from process data. The predictive PLS model had a correlation coefficient (Q 2 ) of 0.92 and could predict the aerosol-based emissions from the NAS process with ±15 % accuracy (average absolute deviation, AAD). The PLS regression model also identified key variables affecting aerosol-based emissions from WLS.

42 ENGINEERING↗

Dynamic data-driven multiscale modeling for predicting the degradation of a 316L stainless steel nuclear cladding material

Here, we have developed a long short-term memory stacked ensemble (LSTM-SE) surrogate modeling approach that can provide rapid predictions of microstructural evolution and the resultant mechanical properties of American Iron and Steel Institute (AISI) 316L series stainless steel (316LSS) fuel cladding under conditions of varying temperature and radiation dose rate. To acquire training data, we developed and implemented a kinetic Monte Carlo (KMC) model to simulate precipitation kinetics of M 23 C 6 , γ', and G phases within SS316L cladding. Experimentally reported precipitation kinetics of SS316L in literature were linked to the kinetic parameters of the simulated precipitation in our KMC model. The model was then used to simulate microstructure evolution under synthetically generated treatments of varying temperature and radiation dose rate, for periods of up to 3000 hours. Changes in volume fraction, number density, and particle size of precipitates were recorded, and particle area fractions were correlated using statistical methods to develop the surrogate model. Simultaneously, the mechanical properties of the simulated microstructures were evaluated using microstructure-based finite element method (FEM) analysis to determine the elastic modulus, yield stress, ultimate tensile strength, and elongation to failure of the aged microstructures. Using this approach, our surrogate model can predict precipitation behavior within 0.25% volume fraction and mechanical properties within 6% relative error from the values predicted by the KMC and FEM models using 50 training simulations as input. The trained recurrent neural network-based model can return estimations of precipitation kinetics and mechanical properties ~1000 times faster than the physics-based codes. This work demonstrates, as a proof of concept, that reactor material service lifetimes under variable service conditions can be predicted for a statistics-based model from a practicably obtainable dataset.

36 MATERIALS SCIENCE↗

Nanoscale Metastable ε-Fe 3 N Ferromagnetic Materials by Self-Sustained Reactions

A single-step method for the preparation of metastable ε-Fe 3 N nanoparticles by combustion of reactive gels containing iron nitrate (Fe(NO 3 ) 3 ) and hexamethylenetetramine (C 6 H 12 N 4 ) in an inert atmosphere is reported. The results of Fourier transform infrared spectroscopy (FTIR) and thermal analysis coupled with dynamic mass spectrometry revealed that the exothermic decomposition of a coordination complex formed between Fe(NO 3 ) 3 and HMTA is responsible for the formation of ε-Fe 3 N nanoscale particles with sizes of 5-15 nm. The magnetic properties between 5 and 350 K are characterized using a superconducting quantum interference device (SQUID) magnetometer, revealing a ferromagnetic behavior with a low-temperature magnetic moment of 1.09 μB/Fe, high room temperature saturation magnetization (~80 emu/g), and low remanent magnetization (~15 emu/g). The obtained value for the Curie temperature of ~522 K is close to that (~575 K) for bulk ε-Fe 3 N reported in the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turbulent Flux Measurements of the Near‐Surface and Residual‐Layer Small Particle Events

Abstract According to recent field studies, almost half of the New Particle Formation (NPF) events occur aloft, in a residual layer, near the top of the boundary layer. Therefore, measurements of the meteorological parameters, precursor gas concentrations, and aerosol loadings conducted at the ground level are often not representative of the conditions where the NPFs take place. This paper presents new measurements obtained during the Turbulent Flux Measurements of the Residual Layer Nucleation Particles, conducted at the Southern Great Plains research site. Vertical turbulent fluxes of 3–10 nm‐sized particles were measured using a sonic anemometer and two condensation particle counters with nominal cutoff diameters of 3 nm and 10 nm mounted at the top of the 10‐m telescoping tower. Aerosol number size distribution (5–300 nm) was determined through the ground‐based Scanning Mobility Particle Sizers. The size selected (15–50 nm) particle hygroscopicity was derived with the Humidified Tandem Differential Mobility Analyzer. The ground level observations were supplemented by vertically‐resolved measurements of horizontal and vertical wind speeds and aerosol backscatter. The data analysis suggests that (a) turbulent flux measurements of 3–10 nm particles can distinguish between near‐surface and residual‐layer small particle events; (b) sub‐50 nm particles had a hygroscopicity value of 0.2, suggesting that organic compounds dominate atmospheric nanoparticle chemical composition at the site; and (c) current methodologies are inadequate for estimating the dry deposition velocity of sub‐10 nm particles because it is not feasible to measure particle concentration very near the surface, in the diffusion sublayer.

54 ENVIRONMENTAL SCIENCES↗

On vortex dust structures in magnetized dusty plasmas

To explain the generation of vortex patterns of dust grains in a magnetized dusty plasma [Huang et al., Plasma Sci. Technol. 9, 1 (2007)], a time dependent nonlinear model that describes vortices as a result of an instability is proposed. Grain-grain as well as grain-ion interactions, particle attachment, and grains drift and diffusion are key elements in the present model. It is found that the latter reproduces the experimental results quite well, whereas the stability analysis shows that the vortex core is grain size dependent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗