Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy

Highlights: • The phase transformation in the plate-like precipitates was investigated by TEM. • The shape of a plate-like Al{sub 6}Mn was kept after transforming to the α-Al{sub 12}Mn{sub 3}Si. • Pseudomorph in metal materials has been found out. - Abstract: The phase transformation in the plate-like precipitates of Al{sub 6}Mn in an AA3004 Al-Mn based alloy, which was prepared by a chemical extraction technique, was investigated using transmission electron microscopy. The boiling-phenol method observed the entire range of possible shapes of the precipitates and the habit planes of the plate-like Al{sub 6}Mn were <001> in the sheet plane and <110> on its edges. The two orientation relationships between Al{sub 6}Mn and α-Al{sub 12}Mn{sub 3}Si after the phase transformation is observed to be [00 1-bar ]{sub 6}//[02 3-bar ]{sub α} and (130){sub 6}//(5 3-bar 2){sub α} and [00 1-bar ]{sub 6}//[1 5-bar 2]{sub α} and (200){sub 6}//(311){sub α} (particles 1 and 2) (the suffixes 6 and α indicate zone axises or lattice planes of Al{sub 6}Mn and α-Al{sub 12}Mn{sub 3}Si phases, respectively). The lattice misfits in these orientation relationships were observed to be − 1.4% and 1.0%, respectively. Additionally, the thickness of the plate-like Al{sub 6}Mn was kept constant after transforming into the α-Al{sub 12}Mn{sub 3}Si phase. Further, we did not observe any low index planes of the α-Al{sub 12}Mn{sub 3}Si parallel to the (001) plane of the Al{sub 6}Mn, which means that the outlines of α-Al{sub 12}Mn{sub 3}Si were constrained by the original shape of Al{sub 6}Mn, i.e., the transformed α-Al{sub 12}Mn{sub 3}Si may be considered as a pseudomorph after Al{sub 6}Mn.

36 MATERIALS SCIENCE↗

EBSD characterization of boundary types after discontinuous precipitation in a grit-blasted nickel-based superalloy

Highlights: • During recrystallization, high-angle grain boundaries increased dramatically. • The reaction fronts are high-angle GBs, but are not always correspond to CSL type. • Σ3 twin boundaries have been confirmed to be positive on reducing residual stress. • No advancing reaction front corresponds to Σ3 twin boundary type. - Abstract: In the present work, direct and detailed insights with respect to the statistical information on boundary type of discontinuous precipitates and their advancing reaction fronts in a Re-containing single crystal superalloy DD6 have been obtained by EBSD. With the annealing time prolonging, the reaction fronts proceeded into the original matrix for gradual release of grit-blast induced stress. The average recrystallized grain diameter and the average depth of recrystallization were respective 0.83 μm and 3.98 μm for the specimen annealed at 1050 °C for 10 min, which, after 16 h, had grown to the average values of 3.22 μm and 31.17 μm. The reaction fronts of discontinuous precipitation have been confirmed to be high-angle grain boundaries, but do not always correspond to CSL type. Besides the role of strain energy dissipation for recrystallization, the formation of twin structure has no direct relationship with the proceeding of reaction fronts. The information of boundary type of discontinuous precipitation and its advancing reaction fronts would provide new insight into the cellular recrystallization behavior.

36 MATERIALS SCIENCE↗

Precipitation behavior of stainless steel weld overlay cladding exposed to a long-term thermal aging

Highlights: • Silicide phase formation with G-phase was first time to be observed. • Precipitation behavior discrepancy existed at different locations of ferrite phase. • G-phase and silicide phase formed along dislocations and within ferrite matrix. • Heterogeneous distribution of elements induced silicide phase formation. - Abstract: Thermal aging behavior of stainless steel weld overlay cladding aged at 400 °C for 10,000 h was investigated. The results showed that the precipitates along the dislocation and within ferrite matrix contained the face-centered cubic structural G-phase and silicide phase. Silicide phase, supposed to be (Fe, Mn){sub 3}Si phase, preferred to form with G-phase along the dislocations and within ferrite matrix. Silicide phase showed a cube-on-cube relationship with ferrite phase and G-phase. Heterogeneous distribution of elements within Ni-Mn-Si clusters was responsible for silicide phase formation during thermal aging process, and the corresponding precipitation behavior discrepancy at different forming sites (dislocations, ferrite matrix and phase boundary) was discussed.

36 MATERIALS SCIENCE↗

Dispersoids and γ′ precipitates in an ultrafine grained René 88DT – 5vol.%Y2O3 alloy with outstanding thermal stability

Highlights: • Dispersoids and precipitates in UFG René 88DT was systematically studied. • TiN and Y4Al2O9 particles are thermally stable in UFG René 88DT. • High thermal stability of the UFG structure was achieved by dispersoids formation. - Abstract: We report on an ultrafine-grained (UFG) René 88DT-5vol.%Y{sub 2}O{sub 3} alloy with a high thermal stability fabricated through high energy mechanical milling and thermomechanical powder consolidation. The as-extruded sample consists of an ultrafine grained γ matrix with an average size of 122 nm with Y{sub 4}Al{sub 2}O{sub 9} nanoparticles (average size: 12.6 nm) and TiN particles (size about 150 nm) being dispersed in the matrix. The UFG microstructure of the alloy showed an outstanding thermal stability with the average grain size only increasing slightly from 122 to 145 nm after holding at 1120 °C (0.85T{sub m}, where T{sub m} is the solidus temperature of the alloy in Kelvin scale) for 2 h and subsequently holding at 760 °C for 16 h. Due to the consumption of γ′ forming elements, Ti and Al, by the formation of the Y{sub 4}Al{sub 2}O{sub 9} and TiN dispersoids, the content of γ′ precipitates in the microstructure of the heat treated sample is significantly reduced, as confirmed by experimentation and calculation using the JMatPro software. Additionally, the size of γ′ precipitates also sharply decreased to 20–30 nm in the heat treated UFG René 88DT-5vol.%Y{sub 2}O{sub 3} alloy, in contrast to a size of 100–150 nm in the Y{sub 2}O{sub 3}-free base alloy under the same heat treatment condition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of titanium and vanadium based precipitates on hydrogen induced degradation of ferritic materials

Highlights: • Hydrogen induced damage is studied in Fe-C-Ti and Fe-C-V ferritic alloys. • Fe-C-Ti is less susceptible to hydrogen embrittlement than Fe-C-V. • Fe-C-V is less susceptible to blistering than Fe-C-Ti. • The role of diffusible hydrogen depends on the damage mechanism. - Abstract: The hydrogen induced damage of generic Fe-C-Ti and Fe-C-V ferritic alloys was investigated to assess the influence of precipitates on the hydrogen sensitivity of a material. The precipitates, formed during heat treatment, were evaluated by scanning transmission electron microscopy (STEM). The hydrogen/material interaction was evaluated by: 1) melt and hot extraction to determine the total and diffusible hydrogen content, respectively, 2) permeation experiments to calculate the diffusion coefficient, 3) thermal desorption spectroscopy to determine the hydrogen trapping characteristics of the materials. Furthermore, two different types of hydrogen induced damage were evaluated, i.e. hydrogen assisted cracking and blistering, resulting from electrochemical hydrogen charging with and without the application of an external load, respectively. Evaluation of the hydrogen induced damage and the role of the precipitates was performed by combining optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). An important though divertive role of diffusible hydrogen is observed in both damage mechanisms for the investigated microstructures. On the one hand, a large amount of diffusible hydrogen compared to strongly trapped hydrogen promotes hydrogen assisted cracking of materials, while on the other hand, the blistering phenomenon is delayed under such conditions.

36 MATERIALS SCIENCE↗

On visualizing material flow and precipitate evolution during probeless friction stir spot welding of an Al-Li alloy

Highlights: • Severe thermal cycle and deformation refined grains and intermetallic particles in SZ. • T{sub 1} phases fully dissolved in SZ followed by re-precipitation of GP zone and δ′ phases. • The predominant flow direction remained in spiral-like pattern during P-FSSW. • Local abrasion existed in the lap-weld interface due to flow difference, forming joining. - Abstract: The precipitate evolution and material flow visualization during probeless friction stir spot welding (P-FSSW) of an Al-Li alloy has been investigated experimentally and numerically in this work. Due to severe heat input during welding, the main strengthening phases of T{sub 1} fully dissolved in the stir zone followed by the re-precipitation of GP zone and δ′ phases, assisted with the refinement of the intermetallic particles and grains. The history of material flow was three-dimensionally visualized with a tracer, studied with X-ray tomography. The experiments and the simulation results provided a consistent interpretation of a circumferential material flow which moved inwards radially near the top surface. Upward flow in the bottom sheet improved with dwell time, causing the interface to bend. Local abrasion between the two sheets due to flow difference led to the disruption of oxide layer, and formed a connection at the interface.

36 MATERIALS SCIENCE↗

Characterization of the effects of different tempers and aging temperatures on the precipitation behavior of Al-Mg (5.25at.%)-Mn alloys

We investigated the effects of different tempers (H131 and H116) and different aging temperatures (50 and 70 °C) on the precipitation behavior of Al-Mg (5.25 at.%)-Mn (Al 5083) alloys aged for a long time (41 and 30 months) using electron backscatter diffraction(EBSD), scanning transmission electron microscopy(STEM), energy-dispersive X-ray spectroscopy(EDS), atom probe tomography (APT), and small angle neutron scattering (SANS). Results for the GP zones and β'' phases were found in Al 5083 H116 aged at 50 °C for 24 months using APT. EDS and SANS revealed that a phase transformation process from GP zones to β'/β phases occurred for precipitates formed in both Al 5083 H131 and H116 aged at 70 °C. The effective diffusion coefficient of Mg in Al 5083 H131 is 1.8 times of that in Al 5083 H116 aged at 70 °C. The precipitation process in Al 5083 H116 aged at 50 °C is much slower than that in the sample aged at 70 °C. Finally, we identified the coarsening process in Al 5083 H131 and H116 aged at 70 °C for > 9 months.

36 MATERIALS SCIENCE↗

High rate performances of the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} synthesized using low temperature hydroxide precipitation

Graphical abstract: A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize a cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. The charge-discharge tests were performed at 1000 mA g{sup -1} between 2.5 and 4.5 V and the discharge capacity is about 160 mAh g{sup -1}. The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance. Highlights: {yields} A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize a novel cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. {yields} The charge-discharge tests were performed at higher current as 5 C between 2.5 and 4.5 V. {yields} The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance. -- Abstract: A low-temperature reaction route is introduced based on hydroxide precipitation method to synthesize the cathode material LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2}. The crystal structure and morphology of the prepared powder have been characterized by X-ray diffraction and Scan electron microscope, respectively. The charge-discharge tests were performed between 2.5 and 4.5 V. The discharge capacity of the material is strongly impacted by the reaction temperature. The powders sintered at 850 {sup o}C show the best electrochemical performance and the initial discharge capacity is about 160 mAh g{sup -1} at 5 C. Powder X-ray diffraction and Scan electron microscope results reveal that the excellent electrochemical performances should be ascribed to the lower precursor reaction temperature, the lower degree of cation mixing and analogous spherical small particles, which can improve the transfer of Li ions and electrons. All these results indicate that this material has potential application in lithium-ion batteries.

36 MATERIALS SCIENCE↗

Preparation of graphene/TiO{sub 2} anode materials for lithium-ion batteries by a novel precipitation method

Graphical abstract: Large-scale preparation of graphene/TiO{sub 2} composites was carried out by precipitation method using graphene oxide nanosheet, Ti(SO{sub 4}){sub 2} and NH{sub 3}H{sub 2}O as starting materials. Highlights: Black-Right-Pointing-Pointer We use cheap graphene oxides, Ti(SO{sub 4}){sub 2} and NH{sub 3}H{sub 2}O as starting materials for preparation of graphene/TiO{sub 2} composites. Black-Right-Pointing-Pointer The reversible capacity and the cycling stability of the TiO{sub 2} are improved by graphene additive. Black-Right-Pointing-Pointer Shorter diffusion length and a larger contact area of graphene/TiO{sub 2} result in excellent electrochemical performance. -- Abstract: This paper reports a large-scale production route for graphene/TiO{sub 2} nanocomposites using water-based in situ precipitation method. In this method, freshly prepared graphene oxides/TiO{sub 2} obtained by precipitating Ti(SO{sub 4}){sub 2} with NH{sub 3}H{sub 2}O was subjected to heat treatment in the presence of N{sub 2}, which resulted in the formation of graphene/TiO{sub 2} nanocomposites. Graphene/TiO{sub 2} composites prepared by our method were found to be suitable as anode materials for lithium ion batteries because of its stable cycling performance and high capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of E{sub h}-pH diagram for room temperature precipitation of zinc stannate microcubes in an aqueous media

Graphical abstract: - Highlights: • One pot aqueous synthesis of zinc stannate (ZnSnO{sub 3}) particles at low temperature. • Synthesis designed with the assistance of potential-pH diagram. • ZnSnO{sub 3} estimated to be stable between pH 8 and 12 was used for synthesis of the particles. • ZnSnO{sub 3}·3H{sub 2}O were formed during the precipitation of zinc stannate. - Abstract: Potential-pH diagram assisted-design for controlled precipitation is an attractive method to obtain engineered binary and ternary oxide particles. Aqueous synthesis conditions of zinc stannate (ZnSnO{sub 3}) particles at low temperature were formulated with the assistance of potential-pH diagram. The pH of a solution containing stoichiometric amounts of Zn{sup 2+} and Sn{sup 4+} was controlled for the precipitation in a one pot synthesis step at room temperature (25 °C). The effect of the concentration of the reactants on the particle size was studied by varying the concentration of the precursor (Zn{sup 2+} + Sn{sup 4+}) solution. Scanning electron micrographs show that the particles are monodispersed micron sized cubes formed by the self-organization of nano-sized crystallites. The obtained microcubes characterized by X-ray Diffraction and thermo gravimetric analysis (TGA) show that the particles are in ZnSnO{sub 3}·3H{sub 2}O form.

36 MATERIALS SCIENCE↗

Preparation of magnesium hydroxide nanoflowers from boron mud via anti-drop precipitation method

Highlights: • We use the anti-drop precipitation method for synthesis of magnesium hydroxide. • Boron mud which is solid waste from a borax factory is used as the magnesium source. • The magnesium hydroxide nanoflowers are prepared in a short time. • The as-prepared magnesium hydroxide can be used as an effective flame retardant. - Abstract: Using boron mud as the starting material, the flower-like magnesium hydroxide (MH) has been successfully prepared via anti-drop precipitation method. The effect of NH{sub 3}·H{sub 2}O concentration, aging time, and surfactant on the morphology of MH was investigated. The optimum precipitation conditions are dropping MgSO{sub 4} solution in 5% NH{sub 3}·H{sub 2}O solution, with 3% polyethylene glycol as surfactant, aging for 30 min. XRD, SEM, FI-IR, and TG/DTA have been employed to characterize the as-prepared samples. XRD reveals that MH with high purity has the brucite structure. SEM images show that the flower-like MH exists in the form of mono-disperse well uniform spherical aggregation with diameter of 3–5 μm. TG/DTA shows a total percentage of weight loss 33.6% with a well-defined endothermic peak near 381.3 °C corresponding to the decomposition of MH. Furthermore, it reports that the extremely fast primary nucleation is of significance for crystal growth of MH.

36 MATERIALS SCIENCE↗

Precipitation kinetics during aging of an alumina-forming austenitic stainless steel

The microstructural evolution of DAFA26, an alumina-forming austenitic (AFA) stainless steel, was investigated during aging. The effect of aging at 750 °C and 800 °C on the growth of spherical γ’-Ni 3 (Al, Ti) particles present in the as-processed state was studied extensively using X-ray diffraction, microhardness testing, scanning electron microscopy, transmission electron microscopy, and atom probe tomography. The γ’ particles had a cube-on-cube orientation relationship with the matrix (i.e. ((010)(010) m //(010)(010) p , [100][100] m //[100][100] p )). The coarsening kinetics of γ’-Ni 3 Al particles were in agreement with the Lifshitz, Slyozof-Wagner theory. Coarse Laves phase particles were also present in the as-processed state, and during the aging process both smaller Laves phase precipitates and B2-NiAl precipitates formed on both the grain boundaries and in the matrix. As a result, the γ’ precipitates were determined to have the most impact on the room temperature hardness.

36 MATERIALS SCIENCE↗

A high-strength precipitation hardened cobalt-free high-entropy alloy

Recent studies on precipitation-hardened high-entropy alloys (HEAs) demonstrate their high strength and thermal stability, making them promising materials for high-temperature structural applications such as nuclear reactors. However, many existing HEAs contain cobalt (Co), which is unsuitable for nuclear applications because of the long-term activation issue of Co. Co is also expensive and considered a critical material for other applications. Therefore, it is desired to exclude Co from the composition. A Co-free (Fe 0.3 Ni 0.3 Mn 0.3 Cr 0.1 ) 88 Ti 4 Al 8 HEA was developed and studied in this work. In contrast to previous Co-free HEAs, this alloy is close to equiatomic in its composition and promises a more pronounced high-entropy effect. Scanning electron microscopy, transmission electron microscopy, atom probe tomography, and synchrotron-based, high-energy X-ray diffraction were used to characterize this alloy and revealed a complex four-phase structure, with an FCC matrix, γ’ precipitates, and a network of B2 and χ phase particles. This structure granted 2151 MPa compressive strength and good thermal stability, but with limited ductility and slow precipitation kinetics. A strengthening analysis of the alloy shows that the B2 and χ provided the most significant strengthening contribution, adding 312 MPa and 788 MPa respectively. Furthermore the strengthening effect from the nanoscale γ' is also considerable, adding 608 MPa in total. This study lays the foundation for the continued development of high-strength Co-free HEAs with improved and satisfactory ductility.

36 MATERIALS SCIENCE↗

Dose rate dependence of Cr precipitation in an ion-irradiated Fe-18Cr alloy

We report precipitation of α' in F - Cr alloys under neutron irradiation is thermodynamically driven while being accelerated by radiation-enhanced diffusion. However, similar alloys under ion irradiation at high dose rates (> 10 -4 dpa/s) fail to exhibit α' precipitation. Here, the microstructure of an Fe - 18Cr alloy under ion or neutron-irradiation at 300 °C at dose rates from ~ 10 -7 to 10 -4 dpa/s was analyzed by atom probe tomography. The steady-state composition content of the clusters depends on the ion irradiation dose and dose rate, confirming the contribution of ballistic mixing in diluting the Cr concentration in non-equilibrium α' precipitates.

36 MATERIALS SCIENCE↗

Post irradiation examination of nanoprecipitate stability and α' precipitation in an oxide dispersion strengthened Fe-12Cr-5Al alloy

Oxide dispersion strengthened (ODS) FeCrAl alloy (Fe-12Cr-5Al wt%) was neutron irradiated to 1.8 displacements per atom (dpa) at 215, 357, and 557 °C to investigate (Y,Al,O) nano-oxide stability and Cr-rich α' precipitate formation using atom probe tomography. Here, the nano-oxide sizes remain unchanged after irradiation, but the compositions are dependent on irradiation temperature due to competition between ballistic dissolution and precipitate reformation. Cr-rich clusters observed after 357 °C irradiation have lower Cr contents (61 at.%) than equilibrium α', with a lower number density than wrought FeCrAl alloys. This suggests a suppression of α' precipitation due to the high sink strength of ODS FeCrAl.

36 MATERIALS SCIENCE↗

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗

Enhanced Manganese Oxidation at the Biofilm–Fluid Interface Drives Pore-Scale Patterns in Mineral Precipitation

Microbial oxidation of manganese (Mn) from aqueous Mn(II) to solid-phase Mn(III, IV) minerals catalyzes Mn(II) removal in natural and engineered porous systems. However, little is known about the spatiotemporal evolution of Mn biomineralization in confined spaces that experience simultaneous Mn(II) delivery and Mn oxide precipitation. Here, we combine time-lapse microscopy, image analysis, and mass spectrometry to quantify the extent and rate of Mn biomineralization by Pseudomonas putida GB-1 in an optically transparent two-dimensional porous medium. We found that Mn(II) oxidation initially occurred within biofilms but shifted over time toward the edges of biofilms in contact with pore fluid. Minerals precipitated outside of the initial biofilm footprint likely due to surface-mediated oxidation of Mn(II) by nascent biogenic Mn oxides, reinforcing a gradient in mineral accumulation from the Mn(II) source near the reactor inlet to the outlet. The rate of mineral precipitation outside the biofilm footprint surpassed the rate of mineral accumulation inside biofilms within 6 h and accounted for two-thirds of the total Mn oxide mass in the pore space at the end of the experiment. This work advances a mechanistic understanding of coupled biotic and abiotic Mn oxidation in porous environments while providing a novel platform to quantify microbe-mineral-fluid interactions.

Biofilms↗

Kinetics of Ni Sorption in Soils: Roles of Soil Organic Matter and Ni Precipitation

The kinetics of Ni sorption to two Delaware agricultural soils were studied to quantitatively assess the relative importance of Ni adsorption on soil organic matter (SOM) and the formation of Ni layered double hydroxide (Ni-LDH) precipitates using both experimental studies and kinetic modeling. Batch sorption kinetic experiments were conducted with both soils at pH 6.0, 7.0, and 7.5 from 24 h up to 1 month. Time-resolved Ni speciation in soils was determined by X-ray absorption spectroscopy (XAS) during the kinetic experiments. A kinetics model was developed to describe Ni kinetic reactions under various reaction conditions and time scales, which integrated Ni adsorption on SOM with Ni-LDH precipitation in soils. The soil Ni speciation (adsorbed phases and Ni-LDH) calculated using the kinetics model was consistent with that obtained through XAS analysis during the sorption processes. Under our experimental conditions, both modeling and XAS results demonstrated that Ni adsorption on SOM was dominant in the short term and the formation of Ni-LDH precipitates accounted for the long-term Ni sequestration in soils, and, more interestingly, that the adsorbed Ni may slowly transfer to Ni-LDH phases with longer reaction times.

54 ENVIRONMENTAL SCIENCES↗