Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

LaAlO{sub 3}/Si capacitors: Comparison of different molecular beam deposition conditions and their impact on electrical properties

A study of the structural and electrical properties of amorphous LaAlO{sub 3} (LAO)/Si thin films fabricated by molecular beam deposition (MBD) is presented. Two substrate preparation procedures have been explored namely a high temperature substrate preparation technique-leading to a step and terraces surface morphology-and a chemical HF-based surface cleaning. The LAO deposition conditions were improved by introducing atomic plasma-prepared oxygen instead of classical molecular O{sub 2} in the chamber. An Au/Ni stack was used as the top electrode for its electrical characteristics. The physico-chemical properties (surface topography, thickness homogeneity, LAO/Si interface quality) and electrical performance (capacitance and current versus voltage and TunA current topography) of the samples were systematically evaluated. Deposition conditions (substrate temperature of 550 Degree-Sign C, oxygen partial pressure settled at 10{sup -6} Torr, and 550 W of power applied to the O{sub 2} plasma) and post-depositions treatments were investigated to optimize the dielectric constant ({kappa}) and leakage currents density (J{sub Gate} at Double-Vertical-Line V{sub Gate} Double-Vertical-Line = Double-Vertical-Line V{sub FB}- 1 Double-Vertical-Line ). In the best reproducible conditions, we obtained a LAO/Si layer with a dielectric constant of 16, an equivalent oxide thickness of 8.7 A, and J{sub Gate} Almost-Equal-To 10{sup -2}A/cm{sup 2}. This confirms the importance of LaAlO{sub 3} as an alternative high-{kappa} for ITRS sub-22 nm technology node.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Integration of high-dielectric constant Ta{sub 2}O{sub 5} oxides on diamond for power devices

The authors report on the direct integration of high-dielectric constant (high-k) Ta{sub 2}O{sub 5} films on p-type single crystal diamond for high-power electronic devices. Crystallized hexagonal phase {delta}-Ta{sub 2}O{sub 5} film is achieved on diamond by annealing the amorphous Ta{sub 2}O{sub 5} film deposited by a sputter-deposition technique. The electrical properties of the Ta{sub 2}O{sub 5} thin films are investigated by fabricating metal-insulator-semiconductor (MIS) diodes. The leakage current of the MIS diode is as low as 10{sup -8} A/cm{sup 2} for the as-deposited amorphous Ta{sub 2}O{sub 5} film and 10{sup -2} A/cm{sup 2} for the crystallized film, which is 10{sup 8} and 10{sup 2} times lower than that of the Schottky diode at a forward bias of -3 V, respectively. The dielectric constant of the amorphous Ta{sub 2}O{sub 5} films is measured to be 16 and increases to 29 after annealing at 800 Degree-Sign C. Different current leakage mechanisms and charge trapping behaviors are proposed for the amorphous and crystallized Ta{sub 2}O{sub 5} thin films.

36 MATERIALS SCIENCE↗

Upconversion luminescence, ferroelectrics and piezoelectrics of Er Doped SrBi{sub 4}Ti{sub 4}O{sub 15}

Er{sup 3+} doped SrBi{sub 4}Ti{sub 4}O{sub 15} (SBT) bismuth layered-structure ferroelectric ceramics were synthesized by the traditional solid-state method, and their upconversion photoluminescent (UC) properties were investigated as a function of Er{sup 3+} concentration and incident pump power. Green (555 nm) and red (670 nm) emission bands were obtained under 980 nm excitation at room temperature, which corresponded to the radiative transitions from {sup 4}S{sub 3/2}, and {sup 4}F{sub 9/2} to {sup 4}I{sub 15/2}, respectively. The emission color of the samples could be changed with moderating the doping concentrations. The dependence of UC intensity on pumping power indicated a two-photon emission process. Studies on dielectric properties indicated that the introduction of Er increased the ferroelectric-paraelectric phase transition temperature (Tc) of SBT, thus making this ceramic suitable for piezoelectric sensor applications at higher temperatures. Piezoelectric measurement showed that the doped SBT had a relative higher piezoelectric constant d{sub 33} compared with the non-doped ceramics. The thermal annealing behaviors of the doped sample revealed a stable piezoelectric property. The doped SBT showed bright UC emission while simultaneously having increased Tc and d{sub 33}. As a multifunctional material, Er doped SBT ferroelectric oxide showed great potential in application of sensor, future optical-electro integration and coupling devices.

36 MATERIALS SCIENCE↗

High thermal stability of piezoelectric properties in (Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}){sub x}-(BaTiO{sub 3}){sub y}-(Na{sub 0.5}K{sub 0.5}NbO{sub 3}){sub 1-x-y} ceramics

We report the piezoelectric and ferroelectric properties of (Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}){sub x}-(BaTiO{sub 3}){sub y}-(Na{sub 0.5}K{sub 0.5}NbO{sub 3}){sub 1-x-y} ceramics for Na{sub 0.5}K{sub 0.5}NbO{sub 3} rich end of composition (x, y {<=} 0.04 mol. %). These compositions were found to exhibit significantly improved thermal stability of piezoresponse. Variation of dielectric constant as a function of temperature revealed that orthorhombic-tetragonal (T{sub o-t}) and tetragonal-cubic (T{sub c}) transition temperatures for these compositions were in the vicinity of 0 Degree-Sign C and 330 Degree-Sign C, respectively. Dynamic scaling and temperature dependent X-ray diffraction analysis were conducted. Results are discussed in terms of intrinsic and extrinsic contributions to the piezoelectric response explaining the temperature dependent behavior.

36 MATERIALS SCIENCE↗

Improving dielectric properties of epitaxial Gd{sub 2}O{sub 3} thin films on silicon by nitrogen doping

We report about the effect of nitrogen doping on the electrical properties of epitaxial Gd{sub 2}O{sub 3} thin films. Epitaxial Gd{sub 2}O{sub 3}:N thin films were grown on Si (111) substrates by solid source molecular beam epitaxy using nitrous oxide as the nitridation agent. Substitutional nitrogen incorporation into the dielectric layer was confirmed by secondary ion mass spectroscopy and X-ray photoelectron spectroscopy analysis. Substantial reduction of the leakage current density and disappearance of hysteresis in capacitance-voltage characteristics observed in the Gd{sub 2}O{sub 3}:N layers indicate that nitrogen incorporation in Gd{sub 2}O{sub 3} effectively eliminates the adverse effects of the oxygen vacancy induced defects in the oxide layer.

36 MATERIALS SCIENCE↗

Reitveld refinement study of PLZT ceramics

PLZT ceramics of composition Pb{sub 0.93}La{sub 0.07}(Zr{sub 0.60}Ti{sub 0.40})O{sub 3}, have been milled for 6hrs and 24hrs were prepared by solid state synthesis route. The 6hrs milled and 24hrs milled samples are represented as PLZT-6 and PLZT-24 ceramics respectively. X-ray diffraction (XRD) pattern was recorded at room temperature. The XRD pattern has been analyzed by employing Rietveld refinement method. Phase identification shows that all the peaks observed in PLZT-6 and PLZT-24 ceramics could be indexed to P4mm space group with tetragonal symmetry. The unit cell parameters of 6hrs milled PLZT ceramics are found to be a=b=4.0781(5)A and c=4.0938(7)A and for 24hrs milled PLZT ceramics unit cell parameters are a=b=4.0679(4)A and c=4.1010(5)A . The axial ratio c/a and unit cell volume of PLZT-6 are 1.0038 and 68.09(2)A{sup 3} respectively. In PLZT-24 samples, the axial ratio c/a value is 1.0080 which is little more than that of the 6hr milled PLZT sample whereas the unit cell volume decrease to 67.88 (1) A{sup 3}. An average crystallite size was estimated by using Scherrer's formula. Dielectric properties were obtained by measuring the capacitance and tand loss using Stanford LCR meter.

36 MATERIALS SCIENCE↗

Stability of UV exposed RR-P3BT films by spectroscopic ellipsometry

Stability of regioregular poly(3-butylthiophene) (RR-P3BT) films under irradiation of ultra-violet (UV) light has been studied by spectroscopic ellipsometry at room temperature. Consistent decrease in dielectric function with UV exposure time showed the degree of degradation of polymer. This work suggests that, protective methods are mandatory to use this kind of material in optical devices.

36 MATERIALS SCIENCE↗

Synthesis, electrical and thermal properties of Bi{sub 4}V{sub 2-x}Zr{sub x}O{sub 11} (x=0.0 and 0.02) ceramics

Polycrystalline ceramic samples of Bi{sub 4}V{sub 2-x}Zr{sub x}O{sub 11} (x=0.0 and 0.02) have been synthesized by standard solid state reaction method. The formation of the compounds has been verified by room temperature (RT) X-ray diffraction. The frequency and temperature dependent dielectric constant of both the compounds have been measured. The dielectric studies indicate that the materials are highly lossy. The dc conductivity of the materials has been measured as a function of temperature from RT to 653K and their activation energies were calculated using Arrhenius relation {sigma} = {sigma}{sub Masculine-Ordinal-Indicator }exp)-Ea/kT). The heat capacity and heat flow of both the compounds were determined as a function of temperature using Modulated Differential Scanning Calorimetry (MDSC).

36 MATERIALS SCIENCE↗

Anomalous dielectric and AC conductivity behavior of the nanocrystalline Ni-Cu ferrite synthesized via combustion method

Nanocrystalline Ni-Cu ferrites (Ni{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4}) were prepared using solution combustion method. The structure of the samples were studied with the X-ray diffraction (XRD) using Cu-K{sub {alpha}} radiation. Frequency and temperature dependence of dielectric and a.c. conductivity studies have been undertaken on the Ni-Cu nanoferrites in the frequency region 100Hz-5MHz. The dielectric constant ({epsilon} Prime ) is found to decrease initially with the frequency and finally reaching a constant value at higher frequencies. Observed trends in the dielectric constant are ascribed to the Maxwell-Wagner type interfacial polarization, which is in agreement with the Koop'fs phenomenological theory. The a.c. conductivity ({sigma}{sub ac}) is found to increase with an increase in the frequency from room temperature up to 300 Degree-Sign C. However, at a temperature of 400 Degree-Sign C, the a.c. conductivity is found to decrease with an increase in the frequency exhibiting an abnormal behavior. The electrical conduction mechanism in the present nano nickel-copper ferrite is found to be in accordance with the electron hopping model.

36 MATERIALS SCIENCE↗

Dielectric response of polyethersulphone (PES) polymer irradiated with 145 MeV Ne{sup 6+} ions

Heavy ion irradiation produces modifications in polymers and adapts their electrical, chemical and optical properties in the form of rearrangement of bonding, cross-linking, chain scission and formation of carbon rich clusters. Modification depends on the ion, its energy and fluence and the polymeric material. In the present work, a study of the dielectric response of pristine and heavy ion irradiated Polyethersulphone (PES) polymer film is carried out. 250 {mu}m thick PES films were irradiated to the fluences of 10{sup 12} and 10{sup 13} ions/cm{sup 2} with Ne{sup 6+} ions of 145 MeV energy from Variable Energy Cyclotron Centre, Kolkata On irradiation with heavy ions dielectric constant ({epsilon} Prime ) decreases at higher frequencies and increases with fluences. Variation of loss factor (tan {delta}) with frequency for pristine and irradiated with Si ions reveals that tan {delta} increases as the frequency increases. The tan{delta} also increases with fluence. Tan {delta} has positive values indicating the dominance of inductive behavior.

36 MATERIALS SCIENCE↗

Structural and multiferroic properties of YMnO{sub 3} ceramics synthesized by co-precipitation method

Single phased hexagonal YMnO{sub 3} (YMO) ceramics have been synthesized via soft chemical co-precipitation route and adopting different sintering conditions. From the X-ray diffraction analysis, ceramic powder sintered at 600 Degree-Sign C was found to be amorphous. Sintering at 1000 Degree-Sign C lead to the formation of single phase YMO belonging to the noncentrosymmetric P6{sub 3}cm space group. Further, dielectric, Leakage and magnetic studies were performed at room temperature.

36 MATERIALS SCIENCE↗

Coherency strain enhanced dielectric-temperature property of rare-earth doped BaTiO{sub 3}

Core/shell-grained BaTiO{sub 3} samples were prepared with addition of rare earth elements. The core/shell interface was semi-coherent, and many misfit dislocations formed in Dy-doped samples. In contrast, a coherent interface and few dislocations were observed in Ho- and Er-doped samples. Dy-doped samples exhibited poor temperature stability, showing a peak with no frequency dispersion. Ho- and Er-doped samples exhibited a broad curve with frequency dispersion. This improved temperature stability is attributed to the coherency strain, which leads to the formation of polar nano-regions in the shell. Coherency at the core/shell interface is critical to improve the temperature stability of core/shell-structured BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

Effect of charge compensation on the photoelectrochemical properties of Ho-doped SrTiO{sub 3} films

When Ho{sup 3+} ions are substituted at Sr{sup 2+} sites in SrTiO{sub 3} (STO), the excess positive charges are compensated via three complementary routes: (1) strontium vacancies, (2) titanium vacancies, and (3) conduction electrons. In this study, we show that the photoelectrochemical properties of Ho-doped STO films are dependent on the charge compensation mechanisms. The compensation mechanism via the titanium vacancies exhibits the highest photocurrent density, which is 1.7 times higher than that of the pure STO sample. Based on the measured dielectric properties and electrochemical impedance spectroscopy data, we propose that the enhanced dielectric constant of the films can enlarge the width of the space charge region at the film/liquid interface, which eventually leads to the increase of the photocurrent density. Further enhancement of photocurrent density is obtained in the samples decorated with appropriate amounts of Pt nanoparticles, showing the advantage of composites for achieving the efficient photoelectrochemical property.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The properties of photonic band gaps for three-dimensional plasma photonic crystals in a diamond structure

In this paper, the properties of photonic band gaps (PBGs) for two types of three-dimensional plasma photonic crystals (PPCs) composed of isotropic dielectric and unmagnetized plasma with diamond lattices are theoretically investigated for electromagnetic waves based on a modified plane wave expansion method. The equations for type-1 structure are theoretically deduced, which depend on the diamond lattices realization (dielectric spheres immersed in plasma background). The influences of dielectric constant of dielectric, plasma collision frequency, filling factor, and plasma frequency on PBGs are investigated, respectively, and some corresponding physical explanations and the possible methods to realize the three-dimensional PPCs in experiments are also given. From the numerical results, it has been shown that not only the locations but also the gap/midgap ratios of the PBGs for two types of PPCs can be tuned by plasma frequency, filling factor, and the relative dielectric constant, respectively. However, the plasma collision frequency has no effect on the frequency ranges and gap/midgap ratios of the PBGs for two types of PPCs.

36 MATERIALS SCIENCE↗

Anomalous change in dielectric constant of CaCu{sub 3}Ti{sub 4}O{sub 12} under violet-to-ultraviolet irradiation

The influence of light illumination on the dielectric constant of CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO) polycrystals is studied in this work. When exposed to 405-nm laser light, a reversible enhancement in the room temperature capacitance as high as 22% was observed, suggesting application of light-sensitive capacitance devices. To uncover the microscopic mechanisms mediating this change, we performed electronic structure measurements, using photoemission spectroscopy, and measured the electrical conductivity of the CCTO samples under different conditions of light exposure and oxygen partial pressure. Together, these results suggest that the large capacitance enhancement is driven by oxygen vacancies induced by the irradiation.

36 MATERIALS SCIENCE↗

Low-temperature crystallization of high performance Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} films compatible with the current silicon-based microelectronic technology

This investigation presents a simple approach to realize the low temperature crystallization of Pb{sub 0.4}Sr{sub 0.6}TiO{sub 3} thin films at 400 Degree-Sign C by taking advantage of well controlled lead excess and kinetic-driving-force compensated thermodynamics crystalline via sputtering deposition. The thin films prepared at low temperature show fine-grained micro-structure because of the suppressed grain growth, furthermore, the intrinsic dielectric response can be modulated by the distinct level of crystallinity. The film processed at 450 Degree-Sign C exhibited a dielectric constant of 435 and high figure merit of 130 at 400 kV/cm, superior ferroelectric property, and stable performance with temperature and frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large remnant polarization and magnetic field induced destruction of cycloidal spin structure in Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2)

We prepared a series of Bi{sub 1-x}La{sub x}FeO{sub 3} (0 {<=} x {<=} 0.2) ceramics with a sol-gel method and find that both the magnetization and dielectric constant show an abrupt anomaly near a critical field H{sub c}, which is attributed to the destruction of the cycloidal antiferromagnetic spin structure. The critical field H{sub c} decreases substantially from {approx}20 T for the x = 0 sample [Y. F. Popov et al., JETP Lett. 57, 69 (1993)] to {approx}2.8 T for the x = 0.17 sample and finally to 0 T for the x = 0.2 sample at room temperature (RT). It is also found that H{sub c} increases with decreasing temperature. The variation of H{sub c} with La substitution and temperature can be ascribed to the change in the magnetic anisotropy and isotropic superexchange interaction, respectively. We have also discussed the magnetodielectric effects in these samples in terms of the Ginzburg-Landau theory and the spin-phonon model. Moreover, increasing the doping level of La to 0.15 greatly improves the RT leakage-current and ferroelectric (FE) properties. A RT square-shaped FE hysteresis loop with remnant polarization (2P{sub r}) as high as {approx}64 {mu}C/cm{sup 2} is obtained for the x = 0.15 sample. These results may be important for potential applications in BiFeO{sub 3}-based magnetoelectric devices.

36 MATERIALS SCIENCE↗