Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

XPS analysis of the effect of fillers on PTFE transfer film development in sliding contacts

The development of transfer films atop steel counterfaces in contact with unfilled and bronze-filled PTFE has been studied using X-ray photoelectron spectroscopy. The sliding apparatus was contained within the vacuum of the analytical system, so the effects of the native oxide, hydrocarbon, and adsorbed gaseous surface layers of the steel upon the PTFE transfer behavior could be studied in situ. For both the filled and the unfilled PTFE, cleaner surfaces promoted greater amounts of transfer. Metal fluorides, which formed at the transfer film/counterface interface, were found solely in cases where the native oxide had been removed to expose the metallic surface prior to sliding. These fluorides also were found at clean metal/PTFE interfaces formed in the absence of frictional contact. A fraction of these fluorides resulted from irradiation damage inherent in XPS analysis. PTFE transfer films were found to build up with repeated sliding passes, by a process in which strands of transfer filled in the remaining counterface area. Under these reported test conditions, the transfer process is not expected to continue atop previously deposited transfer films. The bronze-filled composite generated greater amounts of transfer than the unfilled PTFE. The results are discussed relative to the observed increase in wear resistance imparted to PTFE by a broad range of inorganic fillers.

Blanchet, T. A.↗

Oxyfluoride superlattices K Ta O 3 / K M F 3 ( M = Zn , Ni ) : Structural and electronic phenomena

The structural and electronic properties of KTaO 3 /KZnF 3 and KTaO 3 /KNiF 3 oxyfluoride superlattices are studied from first-principles density functional theory calculations. Here we highlight, that beyond a critical layer thickness, these systems exhibit an insulator to metal transition that gives rise to the appearance of two-dimensional electron and hole gas, confined both, due the band alignment, within the oxide layer. The origin of the insulator to metal transition is related to the polar discontinuity at the interfaces. The behavior is discussed in terms of a simple electrostatic model and compared to that of the prototypical LaAlO 3 /SrTiO 3 oxide system. The magnetic properties KTaO 3 /KNiF 3 superlattices are further discussed, revealing a sizable Rashba-type spin splitting at these interfaces, much larger than in similar oxide/oxide systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic thermal expansion and anharmonic phonon behavior of mullite-type Bi{sub 2}Ga{sub 4}O{sub 9}

Graphical abstract: - Highlights: • Anisotropic lattice thermal expansion of Bi{sub 2}Ga{sub 4}O{sub 9} was modeled using extended Grüneisen first-order approximation. • The model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy. • Temperature dependent Raman frequency shift and line-width was analyzed using symmetric phonon decay channel. - Abstract: We report the lattice thermal expansion and the temperature-dependent phonon behavior of the mullite-type Bi{sub 2}Ga{sub 4}O{sub 9} complex oxide. The thermal expansion was studied using composite data collected from powder and single crystal X-ray diffraction between 100 K and 1273 K. The lattice expansion occurred in the order of a < c < b. The anisotropic expansion behavior was monitored with respect to thermal expansion coefficients and the anisotropy factor. The volume thermal expansion was expressed using an extended Grüneisen first-order approximation to the zero-pressure equation of state; the model includes harmonic, quasi-harmonic and intrinsic anharmonic contributions to the internal energy as a function of temperature. The temperature dependent Raman spectra were collected from a single crystal between 78 K and 1273 K. The shift of the frequencies and the broadening of the line-widths with increasing temperature helped to analyze the anharmonicity and the thermal behavior of some phonons.

36 MATERIALS SCIENCE↗

Structural “ δ Doping” to Control Local Magnetization in Isovalent Oxide Heterostructures

Modulation and δ-doping strategies, in which atomically thin layers of charged dopants are precisely deposited within a heterostructure, have played enabling roles in the discovery of new physical behavior in electronic materials. Here in this paper, we demonstrate a purely structural “δ-doping” strategy in complex oxide heterostructures, in which atomically thin manganite layers are inserted into an isovalent manganite host, thereby modifying the local rotations of corner-connected MnO 6 octahedra. Combining scanning transmission electron microscopy, polarized neutron reflectometry, and density functional theory, we reveal how local magnetic exchange interactions are enhanced within the spatially confined regions of suppressed octahedral rotations. Finally, the combined experimental and theoretical results illustrate the potential to utilize noncharge-based approaches to “doping” in order to enhance or suppress functional properties within spatially confined regions of oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles insights into chromium-induced oxide phases in NiO

The high-temperature oxidation of Ni–Cr alloys leads to complex oxide scales comprising Ni(Cr)O solid solutions, NiCr 2 O 4 spinel, and Cr 2 O 3 corundum within the NiO matrix. Understanding the atomic-scale mechanisms of Cr segregation and precipitate formation is crucial for enhancing oxidation resistance. Here, we employ density functional theory calculations to investigate Cr behavior on NiO(100), (110), and (111) surfaces and in the bulk. Our results reveal that isolated Cr atoms preferentially segregate to the surfaces, stabilizing Ni(Cr)O solid solutions via strong Cr–O bonding, whereas Cr pairs and clusters favor subsurface migration and bulk aggregation, promoting nucleation of NiCr 2 O 4 and Cr 2 O 3 phases. These findings elucidate a size-dependent segregation mechanism linking Cr coordination environments to oxide phase evolution. This atomic-scale insight informs strategies to tailor oxide microstructures and enhance the high-temperature oxidation resistance of Ni–Cr alloys.

Chromium Segregation↗

Electrochemical properties and lithium ion diffusion in Li{sub 4}FeSbO{sub 6} studied by first principle

Due to the high capacity, Li-rich materials Li{sub 2}MO{sub 3} (M = transition metal) have attracted considerable attention as the next generation of Li-ion batteries. Li{sub 4}FeSbO{sub 6} is a new Li-rich layered oxide material with antiferromagnet honeycomb structure. In this work, the electrochemical behavior, charging process and oxygen stability of Li{sub x}FeSbO{sub 6} (0 ≤ x<4) material are investigated by using the spin-polarized density functional theory. Moreover, climbing image nudged elastic band (CI-NEB) method is used to calculate the Li ion migration properties. The results show that Li{sub 4}FeSbO{sub 6} exhibits poor inherent conductivity with the band gap of 2.45 eV. During charging process, the structure presents the excellent volume stability. When Li is extracted, the charge compensation is mainly contributed by the oxygen atoms through analyzing the Bader charges of each element. In addition, oxygen evolution reactions will occur in Li{sub x}FeSbO{sub 6} (x ≤ 1.5), which will decay the capacities during cycling process. Finally, we calculated that the lithium ion can diffuse in a three-dimensional pathway with the activation barriers from 0.36 eV to 0.67 eV. - Graphical abstract: Li{sub 4}FeSbO{sub 6} is a new Li-rich layered oxide material with antiferromagnet honeycomb structure. We calculated that the lithium ion can diffuse in a three-dimensional pathway Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New rock salt-related oxides Li{sub 3}M{sub 2}RuO{sub 6} (M=Co, Ni): Synthesis, structure, magnetism and electrochemistry

We describe the synthesis, crystal structure, magnetic and electrochemical characterization of new rock salt-related oxides of formula, Li{sub 3}M{sub 2}RuO{sub 6} (M=Co, Ni). The M=Co oxide adopts the LiCoO{sub 2} (R-3m) structure, where sheets of LiO{sub 6} and (Co{sub 2}/Ru)O{sub 6} octahedra are alternately stacked along the c-direction. The M=Ni oxide also adopts a similar layered structure related to Li{sub 2}TiO{sub 3}, where partial mixing of Li and Ni/Ru atoms lowers the symmetry to monoclinic (C2/c). Magnetic susceptibility measurements reveal that in Li{sub 3}Co{sub 2}RuO{sub 6}, the oxidation states of transition metal ions are Co{sup 3+} (S=0), Co{sup 2+} (S=1/2) and Ru{sup 4+} (S=1), all of them in low-spin configuration and at 10 K, the material orders antiferromagnetically. Analogous Li{sub 3}Ni{sub 2}RuO{sub 6} presents a ferrimagnetic behavior with a Curie temperature of 100 K. The differences in the magnetic behavior have been explained in terms of differences in the crystal structure. Electrochemical studies correlate well with both magnetic properties and crystal structure. Li-transition metal intermixing may be at the origin of the more impeded oxidation of Li{sub 3}Ni{sub 2}RuO{sub 6} when compared to Li{sub 3}Co{sub 2}RuO{sub 6}. Interestingly high first charge capacities (between ca. 160 and 180 mAh g{sup −1}) corresponding to ca. 2/3 of theoretical capacity are reached albeit, in both cases, capacity retention and cyclability are not satisfactory enough to consider these materials as alternatives to LiCoO{sub 2}. - Graphical abstract: Two new rock salt related oxides of formula, Li{sub 3}M{sub 2}RuO{sub 6}, (M=Co, Ni) have been prepared. The M=Co oxide adopts the LiCoO{sub 2} (R-3m) structure and the M=Ni oxide adopts a similar layered structure related to Li{sub 2}TiO{sub 3,} monoclinic (C2/c), with partial mixing of Li and Ni/Ru atoms. For Li{sub 3}Co{sub 2}RuO{sub 6}, oxidation state for Ru is 4+ and antiferromagnetic (AFM) order is found below 10 K while for the analogous Li{sub 3}Ni{sub 2}RuO{sub 6} , Ru oxidation state is 5+ and a ferrimagnetic (FM) behavior with a Curie temperature of 100 K is found. Electrochemical studies correlate well with both magnetic properties and crystal structure. - Highlights: • New Ruthenium rock salt-related oxides of formula, Li{sub 3}M{sub 2}RuO{sub 6} (M=Co, Ni) were studied. • Structurally different: rhombohedral α-NaFeO{sub 2}-type (Co) and monoclinic Li{sub 2}TiO{sub 3}-type (Ni) • Magnetic behavior is different: the Co sample is AFM while the Ni one is ferrimagnetic. • Ruthenium oxidation states are different: 4+ in the Co sample and 5+ in the Ni one. • Electrochemical studies correlate well with magnetic properties and crystal structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for non-electrostatic interactions between a pyrophosphate-functionalized uranyl peroxide nanocluster and iron (hydr)oxide minerals

We report the terminal oxygen atoms of the pyrophosphate groups in the uranyl peroxide nanocluster U 24 Pp 12 ([(UO 2 ) 24 (O 2 ) 24 (P 2 O 7 ) 12 ] 48- ) are not fully satisfied by bond valence considerations and can become protonated. This functionality could allow for specific interactions with mineral surfaces, as opposed to the electrostatically-driven interactions observed between non-functionalized uranyl peroxide nanoclusters and mineral surfaces. The sorption of U 24 Pp 12 to goethite and hematite was studied using batch sorption experiments as a function of U 24 Pp 12 concentration, mineral concentration, and pH. A suite of spectroscopic techniques, scanning electron microscopy, and electrophoretic mobility measurements were used to examine the minerals before and after reaction with U 24 Pp 12 , leading to a proposed conceptual model for U 24 Pp 12 interactions with goethite. The governing rate laws were determined and compared to those previously determined for a non-functionalized uranyl peroxide nanocluster. The rate of uranyl peroxide nanocluster sorption depends on the charge density and functionalized component of the uranyl peroxide cage. Electrophoretic mobility and attenuated total reflectance Fourier transform infrared spectroscopy analyses show that an inner-sphere complex forms between the U 24 Pp 12 cluster and the goethite surface through the terminal pyrophosphate groups, leading to a proposed conceptual model in which U 24 Pp 12 interacts with the triply-coordinated reactive sites on the (110) plane of goethite. Finally, these results demonstrate that the behavior of U 24 Pp 12 at the iron (hydr)oxide-water interface is unique relative to interactions of the uranyl ion and non-functionalized uranyl peroxide nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag

We investigated the effect of direct reduced iron (DRI) addition on dephosphorization of molten steel by electric arc furnace (EAF) slag at 1823 K (1550 °C). Various phenomena such as CO gas evolution and slagmaking by gangue oxides in DRI were experimentally observed at each reaction step. Thermodynamic behaviors of phosphorus, oxygen, and carbon were strongly dependent on DRI content. Basicity, which is the thermodynamic driving force of dephosphorization, decreased with the increasing DRI content because SiO{sub 2} concentration in the slag was proportional to DRI addition. The excess free energy of P{sub 2}O{sub 5} increased with the increasing SiO{sub 2} content in slag. A higher DRI content made dephosphorization difficult by decreasing the basicity and stability of P{sub 2}O{sub 5} in the slag. Therefore, when using DRI in EAF process, it is very important to control the basicity of slag.

36 MATERIALS SCIENCE↗

The role of the alloy matrix in the creep behavior of particle-strengthened alloys

The strengthening microstructural features in heat-resistant super-alloys are oxide dispersoids and/or gamma-prime precipitates. The role of the strength of the alloy matrix in the creep resistance of these alloys is considered. An evaluation was made of experimental data on oxide-dispersion- and/or precipitation-strengthened nickel-based alloys with various levels of matrix solid solution strengthening; a generalized expression for creep rates which separates the matrix contributions from the particle contributions to the resisting stress and creep strength of these alloys was derived. It is concluded that the major role of the alloy matrix in the creep behavior of these alloys is in determining the apparent stress dependence of the creep rates.

Ajaja, O.↗

Facile Oxide to Chalcogenide Conversion for Actinides Using the Boron–Chalcogen Mixture Method

Actinide chalcogenides are of interest for fundamental studies of the behavior of 5f electrons in actinides located in a soft ligand coordination environment. As actinides exhibit an extremely high affinity for oxygen, the synthesis of phase pure actinide chalcogenide materials free of oxide impurities is a great challenge and, moreover, requires the availability and use of oxygen free starting materials. Herein, we report a new method, the Boron-Chalcogen Mixture (BCM) method, for the synthesis of phase pure uranium chalcogenides based on the use of a boron/chalcogen mixture, where boron functions as an “oxygen sponge” to remove oxygen from an oxide precursor and where the elemental chalcogen effects transformation of the oxide precursor into an oxygen free chalcogenide reagent. Here, the boron oxide can be separated from the reaction mixture that is left to react to form the desired chalcogenide product. Several syntheses are presented that demonstrate the broad functionali-ty of the technique and thermodynamic calculations that show the underlying driving force are discussed. Specifically, three classes of chalcogenides that include both new (rare earth uranium sulfides and alkali-thorium thiophosphates) and previously reported compounds were prepared to validate the approach: binary uranium and thorium sulfides, oxide to sulfide transfor-mation in solid state reactions, and in situ generation of actinide chalcogenides in flux crystal growth reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fatigue crack growth and low cycle fatigue of two nickel base superalloys

The fatigue crack growth and low cycle fatigue behavior of two P/M superalloys, Rene 95 and Astroloy, in the hot isostatically pressed (HIP) condition, was determined. Test variables included frequency, temperature, environment, and hold times at peak tensile loads (or strains). Crack initiation sites were identified in both alloys. Crack growth rates were shown to increase in argon with decreasing frequency or with the imposition of hold times. This behavior was attributed to the effect of oxygen in the argon. Auger analyses were performed on oxide films formed in argon. Low cycle fatigue lives also were degraded by tensile hold, contrary to previous reports in the literature. The role of environment in low cycle fatigue behavior is discussed.

Stoloff, N. S.↗

A Super-Oxidized Radical Cationic Icosahedral Boron Cluster

While the icosahedral closo-[B 12 H 12 ] 2– cluster does not display reversible electrochemical behavior, perfunctionalization of this species via substitution of all 12 B–H vertices with alkoxy or benzyloxy (OR) substituents engenders reversible redox chemistry, providing access to clusters in the dianionic, monoanionic, and neutral forms. In this work, we evaluated the electrochemical behavior of the electron-rich B 12 (O-3-methylbutyl) 12 (1) cluster and discovered that a new reversible redox event that gives rise to a fourth electronic state is accessible through one-electron oxidation of the neutral species. Chemical oxidation of 1 with [N(2,4-Br 2 C 6 H 3 ) 3 ] •+ afforded the isolable [1] •+ cluster, which is the first example of an open-shell cationic B 12 cluster in which the unpaired electron is proposed to be delocalized throughout the boron cluster core. The oxidation of 1 is also chemically reversible, where treatment of [1] •+ with ferrocene resulted in its reduction back to 1. The identity of [1] •+ is supported by EPR, UV–vis, multinuclear NMR ( 1 H, 11 B), and X-ray photoelectron spectroscopic characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of probe oxide in local surface conductivity measurements

Local probe methods can be used to measure nanoscale surface conductivity, but some techniques including nanoscale four point probe rely on at least two of the probes forming the same low resistivity non-rectifying contact to the sample. Here, the role of probe shank oxide has been examined by carrying out contact and non-contact I V measurements on GaAs when the probe oxide has been controllably reduced, both experimentally and in simulation. In contact, the barrier height is pinned but the barrier shape changes with probe shank oxide dimensions. In non-contact measurements, the oxide modifies the electrostatic interaction inducing a quantum dot that alters the tunneling behavior. For both, the contact resistance change is dependent on polarity, which violates the assumption required for four point probe to remove probe contact resistance from the measured conductivity. This has implications for all nanoscale surface probe measurements and macroscopic four point probe, both in air and vacuum, where the role of probe oxide contamination is not well understood.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Sintered-reaction Bonded Silicon Nitride Densified by a Gas Pressure Sintering Process Effects of Rare Earth Oxide Sintering Additives

Reaction-bonded silicon nitrides containing rare-earth oxide sintering additives were densified by gas pressure sintering. The sintering behavior, microstructure and mechanical properties of the resultant specimens were analyzed. For that purpose, Lu2O3-SiO2 (US), La2O3-MgO (AM) and Y2O3-Al2O3 (YA) additive systems were selected. Among the tested compositions, densification of silicon nitride occurred at the lowest temperature when using the La2O3-MgO system. Since the Lu2O3-SiO2 system has the highest melting temperature, full densification could not be achieved after sintering at 1950oC. However, the system had a reasonably high bending strength of 527 MPa at 1200oC in air and a high fracture toughness of 9.2 MPa m1/2. The Y2O3-Al2O3 system had the highest room temperature bending strength of 1.2 GPa

36 MATERIALS SCIENCE↗

Atomically Thin Polymer Layer Enhances Toughness of Graphene Oxide Monolayers

During the last decade, two-dimensional (2D)materials have emerged as versatile building blocks for the next generation of engineered materials. However, the intrinsically brittle behavior of 2D materials has thus far delayed their adoption in applications such as sensors and structural materials. Herein, we demonstrate a strategy for toughening graphene oxide (GO) through synergistic interfacial interactions between GO monolayers and ultrathin layers of strongly interacting poly(vinyl alcohol) (PVA). By creating GO-PVA and PVA-GO-PVA nanolaminates, we demonstrate a 2-fold increase in GO toughness, which translates into dramatic increases in energy dissipation and piercing resistance. Atomistic simulations show that this remarkable behavior arises from a polymer chain crack-bridging mechanism, resulting froma synergistic combination of interdomain reinforcements across the GO monolayer and extensive GO-polymer interfacial hydrogen-bonding interactions. Here, the reported findings highlight the potential for achieving engineered 2D materials with superior mechanical properties by incorporating deformation and failure-resistant mechanics arising from tailored chemical interactions between constituents.

2D materials↗

Summary of Gas Generation Behavior Observed in 3013 Surveillance and Monitoring Program Shelf-Life Experiments

Gas generation experiments have been conducted in small- and full-scale test containers at Los Alamos National Laboratory on samples of plutonium oxide material collected from plutonium processes across the DOE complex and tested at the bounding conditions for the Department of Energy 3013 Standard. The gas composition and pressures in the sealed experimental containers were measured over periods of months to years. These experiments have provided results for the formation and consumption of hydrogen and other gases. The conditions supporting the formation of flammable gas mixtures of hydrogen and oxygen in flammable gas mixtures were also determined. Different behaviors were observed between the materials tested based on their compositions, the stabilization performed on the material, and the post stabilization handling of the material. Many of the experiments are still ongoing. This report summarizes the results obtained for the gas generation behavior for high-purity plutonium oxides and salt-bearing impure plutonium oxides in sealed containers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effects of water-vapor on friction and deformation of polymeric magnetic media in contact with a ceramic oxide

The effects of humidity (water-vapor) in nitrogen on the friction and deformation behavior of magnetic tape in contact with a Ni-Zn ferrite spherical pin were studied. The coefficient of friction is markedly dependent on the ambient relative humidity. In elastic contacts the coefficient of friction increased linearly with increasing humidity; it decreased linearly when humidity was lowered. This effect is the result of changes in the chemistry and interaction of tape materials such as degradation of the lubricant. In plastic contacts there was no effect of humidity on friction below 40 percent relative humidity. There is no effect on friction associated with the breakthrough of the adsorbed water-vapor film at the interface of the tape and Ni-Zn ferrite. The coefficient of friction, however, increased rapidly with increasing relative humidity above 40 percent in plastic contacts.

Miyoshi, K.↗