Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Column Aerosol Optical Properties and Aerosol Radiative Forcing During a Serious Haze-Fog Month over North China Plain in 2013 Based on Ground-Based Sunphotometer Measurements

In January 2013, North China Plain experienced several serious haze events. Cimel sunphotometer measurements at seven sites over rural, suburban and urban regions of North China Plain from 1 to 30 January 2013 were used to further our understanding of spatial-temporal variation of aerosol optical parameters and aerosol radiative forcing (ARF). It was found that Aerosol Optical Depth at 500 nm (AOD500nm) during non-pollution periods at all stations was lower than 0.30 and increased significantly to greater than 1.00 as pollution events developed. The Angstrom exponent (Alpha) was larger than 0.80 for all stations most of the time. AOD500nm averages increased from north to south during both polluted and non-polluted periods on the three urban sites in Beijing. The fine mode AOD during pollution periods is about a factor of 2.5 times larger than that during the non-pollution period at urban sites but a factor of 5.0 at suburban and rural sites. The fine mode fraction of AOD675nm was higher than 80% for all sites during January 2013. The absorption AOD675nm at rural sites was only about 0.01 during pollution periods, while 0.03-0.07 and 0.01-0.03 during pollution and non-pollution periods at other sites, respectively. Single scattering albedo varied between 0.87 and 0.95 during January 2013 over North China Plain. The size distribution showed an obvious tri-peak pattern during the most serious period. The fine mode effective radius in the pollution period was about 0.01-0.08 microns larger than during nonpollution periods, while the coarse mode radius in pollution periods was about 0.06-0.38 microns less than that during nonpollution periods. The total, fine and coarse mode particle volumes varied by about 0.06-0.34 cu microns, 0.03-0.23 cu microns, and 0.03-0.10 cu microns, respectively, throughout January 2013. During the most intense period (1-16 January), ARF at the surface exceeded −50W/sq m, −180W/sq m, and −200W/sq m at rural, suburban, and urban sites, respectively. The ARF readings at the top of the atmosphere were approximately −30W/sq m in rural and −40-60W/sq m in urban areas.

Atmosphere↗

Alteration of Optical Properties in Polymer Materials under Low Earth Orbit (LEO) Space and Simulated Exposure

This paper provides an overview of the 16th Materials International Space Station Experiment (MISSE) project, conducted by a multiorganizational team of researchers. The orbital environment during the mission, including environmental sensors data and unexpected occurrences, are discussed. The research further examines the spectral changes in selected material, Kapton TF, exposed to low Earth orbit conditions during the mission. Optical images of the material taken during the mission were analyzed using a machine learning approach. This process involved the use of a Radial Basis Function network to extract reflectance spectra from RGB/IR images. The findings were then compared with lab-based experiments of identical materials subjected to simulated space weather conditions. This comprehensive study aids in making accurate predictions about the performance of materials in space, thereby improving the reliability and safety of future space missions.

Insulators↗

SIMBIOS Data Product and Algorithm Validation with Emphasis on the Biogeochemical and Inherent Optical Properties

The purpose of our component of the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) program is to address and quantify the relative accuracy of the various ocean color remote sensing products by means of product and algorithm validation. In order to accomplish these goals, we have been collaborating in an international research program in the Gulf of California designed to examine the spatial and temporal bio-optical variability in this region. In addition, we participated in various cruises of opportunity to supplement our validation data set. Our long-term objectives are to: (1) collect optical and biochemical data in oceanic and coastal regions of interest; (2) provide collected data to the Sea-Viewing Wide Field-of-view Sensor (SeaWiFS) Bio-Optical Archive and Storage System (SeaBASS) database, the SIMBIOS project office, and other interested users; (3) maintain and update instrumentation and data archiving and dissemination systems; and (4) determine spatial and temporal error fields for the biological and geophysical data products from the various ocean color missions.

Zaneveld, J. Ronald V.↗

H I CONTENT AND OPTICAL PROPERTIES OF FIELD GALAXIES FROM THE ALFALFA SURVEY. II. MULTIVARIATE ANALYSIS OF A GALAXY SAMPLE IN LOW-DENSITY ENVIRONMENTS

This is the second paper of two reporting results from a study of the H I content and stellar properties of nearby galaxies detected by the Arecibo Legacy Fast ALFA blind 21 cm line survey and the Sloan Digital Sky Survey in a 2160 deg{sup 2} region of high galactic latitude sky covered by both surveys, in the general Virgo direction. Here, we analyze a complete H I flux-limited subset of 1624 objects with homogeneously measured 21 cm and multi-wavelength optical attributes extracted from the control sample of H I emitters in environments of low local galactic density assembled by Toribio et al. (Paper I). Strategies of multivariate data analysis are applied to this data set in order to (i) investigate the correlation structure of the space defined by an extensive set of potentially independent observables describing gas-rich systems, (ii) identify the intrinsic parameters that best define their neutral gas content, and (iii) explore the scaling relations arising from the joint distributions of the quantities most strongly correlated with the H I mass. The principal component analysis performed over a set of five galaxy properties reveals that they are strongly interrelated, supporting previous claims that nearby H I emitters show a high degree of correlation. The best predictors for the expected value of M{sub HI} are the diameter of the stellar disk, D{sub 25,r}, followed by the total luminosity (both in the r band), and the maximum rotation speed, while morphological proxies such as color show only a moderately strong correlation with the gaseous content attenuated by observational error. Among the various inferred prescriptions, the simplest and most accurate is log(M{sub HI}/M{sub sun}) = 8.72 + 1.25 log(D{sub 25,r}/kpc). We find a slope of -8.2 {+-} 0.5 for the relation between optical magnitude and log rotation speed, in good agreement with Tully-Fisher studies, as well as a log slope of 1.55 {+-} 0.06 for the H I mass-optical galaxy size relation. Given the homogeneity of the measurements and the completeness of our data set, the latter outcome suggests that the constancy of the average (hybrid) H I surface density advocated by some authors for the spiral population is just a crude approximation.

79 ASTRONOMY AND ASTROPHYSICS↗

Optical properties of grains in molecular clouds and accretion disks

A baseline model of the composition and abundances of grains and gases in molecular cloud cores and accretion disks around young stars is defined by employing: a wide range of astronomical data and theory; the composition of primitive bodies in the solar system; and solar elemental abundances. It is proposed that in the coldest portions of these objects the major grain species include amorphous olivine, amorphous orthopyroxene, volatile and refractory organics, water ice, troilite, and metallic iron. Using a combination of laboratory measurements of optical constants and asymptotic theory, values of the real and imaginary indices of refraction of these grain species over a wavelength range that runs from the vacuum UV to the radio domain are derived. Auxiliary information for these grain species, such as their vaporization temperatures bulk densities, and their fractional abundances by mass. The above information on grain properties in molecular cloud cores and accretion disks is used to estimate the Rosseland mean opacity of the grains in both environments and the IR and microwave opacity of grains in accretion disks.

Pollack, J. B.↗

Investigation of optical properties of epitaxial yttrium iron garnet films

In work we investigated yttrium iron garnet epitaxial films with a thickness of 10 µm and 55 µm which were grown on the surface of garnet substrate. Using the polarizing microscopy method the branching domain structure of films was shown with the period of domains 21.5 µm and 42.5 µm. Disappearance of domains at presence of an external magnetic field up to 100 Oe was noted. The optical transmission of films for the polarized beam of HeNe laser is investigated and zero diffraction order and odd diffraction rings orders were shown. Interconnection of the period of chaotically oriented domains with angles of axially symmetric diffraction rings orders was shown. Diffraction patterns at various longitudinal magnetic fields are investigated. Disappearance of odd diffraction orders and increasing in intensity of zero diffraction order were fixed. Optical transmission of epitaxial films was measured in range of 500 - 900 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Long-Term Variation of Aerosol Optical Properties Associated With Aerosol Types Over East Asia Using AERONET and Satellite (VIIRS, OMI) Data (2012–2019)

We analyzed annual and seasonal frequency in aerosol type over an 8-year period (2012–2019) to identify aerosol parameter trends over four ground sites and country regions in Korea, China, and Japan by using the Aerosol Robotic Network (AERONET), and the satellite-based Visible Infrared Imaging Radiometer Suite (VIIRS) and Ozone Monitoring Instrument (OMI). Decreasing trends are shown for aerosol optical depth (AOD), Ångstr¨om exponent (AE), and fine mode fraction (FMF) in all countries. The decreasing trend in these data is considered to be due to a decrease in anthropogenic emissions. For the aerosol type frequency, decreases in the proportions of carbonaceous aerosols (CA) and non-absorbing aerosols (NA) were shown in the ground and satellite data, respectively. At most sites, the fractions of low AOD case (LOW) increased, whereas those of the Black and Brown Carbon (BC + BrC) category decreased. In Seoul, the fraction of LOW increased from 48.9% to 70.0%, and that of BC + BrC decreased continuously from 20.4% to 11.1% during 2012–2019. Beijing, on the other hand, showed decreasing LOW from 83.3% (2012) to 52.0% (2019), and that of BC + BrC increased significantly, from 2.4% to 26.2%. The satellite data showed that the percentage of LOW increased continuously, while that of NA aerosols decreased continuously in East Asia. A noticeable decrease in the fraction of CA was detected in China [21.5% (2013) to 11.2% (2019)]. In all countries, CA and NA aerosols had the greatest effect in winter and summer, respectively. We also detected significant differences between the fractions of NA and BC between the ground and satellite data. Changes in aerosol type and properties were observed concurrently in all ground and satellite data, and changes in aerosol type may explain the increasing and decreasing trends that we recorded for most parameters. Consistent results from both ground and satellite data suggest a steady decreasing in fine aerosol pollution in East Asia.

Sujin Eom↗

Leaf Optical Properties in Higher Plants: Linking Spectral Characteristics with Plant Stress

A number of studies have addressed responses of leaf spectral reflectance, transmittance, or absorptance to physiological stress. Stressors included dehydration, ozone, herbicides, disease, insufficient mycorrhizae and N fertilization, flooding and insects. Species included conifers, grasses, and broadleaved trees. Increased reflectance with maximum responses near 700 nm wavelength occurred in all cases. Varying the chlorophyll content in leaves or pigment extracts can simulate this effect. Thus, common optical responses to stress result from decreases in leaf chlorophyll contents or the capacity of chloroplasts to absorb light. Leaf optic can be quite sensitive to any stressor that alters soil-plant-atmosphere processes.

Carter, Gregory A.↗

Optical properties of marine stratocumulus clouds modified by ship track effluents

Results are presented from multispectral radiation measurements made within a marine stratocumulus cloud layer modified by ship-track effluents. The measurements showed that, compared with nearby noncontaminated clouds not affected by pollution, the upwelling intensity field of the modified stratocumulus clouds increased at a nonabsorbing wavelength in the visible region and decreased in the NIR, where absorption by liquid water is significant. The observations are consistent with an increased optical thickness, a reduced effective radius of the cloud droplets, and a reduced absorption in the contaminated cloud layer compared to a noncontaminated cloud.

King, Michael D.↗

Simulating the optical properties of soot using a stochastic soot model

KL extinction measurements are common in literature concerning soot producing sprays because of their nonintrusiveness. Unfortunately, these measurements often rely on bold assumptions of uniform and monodisperse spherical particles. In this work, a Spray A case is simulated using a highly detailed 3D stochastic soot model and the measured and simulated soot volume fraction are compared. Although the simulated volume fraction magnitude is approximately correct, features are much sharper than in the measured data. Optical models based on particle shape are applied to the simulated soot particles to nd the local optical thickness. The modeled optical thickness aligns with the measured volume fraction much more closely than the simulated volume fraction indicating KL extinction measurements are not simply related to soot volume fraction.

Strickland, Tyler↗

Optical properties of mercury ion thruster exhausts and implications for science instruments

Emission from the exhaust plume of a 30 cm mercury ion thruster was measured from 160 to 600 nm as a function of axial and radial distance from the thruster discharge chamber. The spectrally dispersed absolute intensities were used to construct an empirical volume rate function. The function was integrated along a typical instrument field of view, and the resulting apparent brightness was compared with instrument sensitivities to evaluate the extent of optical interference. Most of the emitted radiation came from UV lines of excited mercury atoms and ions, with no observable continuum emission. The intensity levels degraded rapidly with distance from the thruster so that optical interference was negligible for fields of view not intercepting the beam axis. The operation of only one instrument, a zodiacal photopolarimeter, was considered incompatible with simultaneous thruster operation.

Monahan, K. M.↗

Effect of purity on the electro-optical properties of single wall nanotube-based transparent conductive electrodes

We present a detailed assessment of centrifugation technique for purification of single wall carbon nanotubes (SWCNTs) for application as transparent conductive electrodes. As- grown and highly-purified SWCNTs were dispersed in surfactants by ultrasonication, and then centrifuged to selectively remove carbonaceous and metal impurities. The centrifuged supernatant suspensions were made into thin films by transferring filtrated nanotube coat- ings onto glass slides. The absorbance and resistance of nanotube coatings were measured, and their optical purity level estimated from a comparison of the area of the near-infrared S22 SWCNT optical absorption band relative to the area of the background. The single-step centrifugation process is shown to purify laser-vaporization grown SWCNTs from an initial optical purity of 0.10 to an averaged purity of 0.23, with an 8.8% yield, which is comparable to other purification techniques. The quality of transparent conductive electrodes esti- mated as a ratio of visible-spectrum absorbance to sheet conductivity is improved by a fac- tor of 12 upon purification.

nanotube↗

Optical properties of mercury ion thruster exhaust plumes Significance for candidate SEP science instruments

Emission from the exhaust plume of a 30 cm mercury ion thruster was measured from 160 to 600 nm as a function of axial and radial distance from the thruster discharge chamber. The spectrally dispersed absolute intensities were used to construct an empirical volume emission rate function. The function was integrated along a typical instrument field of view, and the resulting apparent brightness was compared with instrument sensitivities to evaluate the extent of optical interference. The intensity levels degraded rapidly with distance from the thruster so that optical interference was negligible for fields of view not intercepting the beam axis. The operation of only one instrument, a zodiacal photopolarimeter was considered incompatible with simultaneous thruster operation.

Goldstein, R.↗

Study of the effects of MeV Ag, Cu, Au, and Sn implantation on the optical properties of LiNbO3

The authors present the results of characterization of linear absorption and nonlinear refractive index of Au, Ag, Cu and Sn ion implantation into LiNbO3. Ag was implanted at 1.5 MeV to fluences of 2 to 17 x 17(exp 16)/sq cm at room temperature. Au and Cu were implanted to fluences of 5 to 20 x 10(exp 16)/sq cm at an energy of 2.0 MeV. Sn was implanted to a fluence of 1.6 x 10(exp 17)/sq cm at 160 kV. Optical absorption spectrometry indicated an absorption peak for the Au implanted samples after heat treatment at 1,000 C at approx. 620 nm. The Ag implanted samples absorption peaks shifted from approx. 450 nm before heat treatment to 550 nm after 500 C for 1h. Heat treatment at 800 C returned the Ag implanted crystals to a clear state. Cu nanocluster absorption peaks disappears at 500 C. No Sn clusters were observed by optical absorption or XRD. The size of the Ag and Au clusters as a function of heat treatment were determined from the absorption peaks. The Ag clusters did not change appreciably in size with heat treatment. The Au clusters increased from 3 to 9 nm diameter upon heat treatment at 1000 C. TEM analysis performed on a Au implanted crystal indicated the formation of Au nanocrystals with facets normal to the c-axis. Measurements of the nonlinear refractive indices were carried out using the Z-scan method with a tunable dye laser pumped by a frequency doubled mode-locked Nd:YAG laser. The dye laser had a 4.5 ps pulse duration time and 76 MHz pulse repetition rate (575 nm).

Williams, E. K.↗

Tailoring the optical properties of MoS 2 and WS 2 single layers via organic functionalization

Tailoring the structural and electronic properties of 2D materials is fundamental to boost their use in a wide range of technological applications. In this paper, by means of first principles simulations, we show how methyl functionalization of MoS2 and WS2 monolayers can be employed to change their energy gap, tune their optoelectronic properties and modify the relative stability of their structural phases (or polytypes). In particular for both compound monolayers, we find that the most stable semiconducting H phase becomes metallic upon methyl functionalization, while in the metastable T' phase the band gap increases as a function of the –CH3 coverage; correspondingly the phase stability is reversed and the on-set of the optical absorption is blue-shifted.

Palummo, M.↗

Structure and optical properties of evaporated films of the Cr- and V-group metals

Thin films of Cr, Mo, and W rapidly evaporated in high vacuum (5 x 10 to the -7th torr) onto room-temperature substrates show anomalously low reflectance (compared to bulk samples). From electron and X-ray diffraction and electron microscopy, the normal bcc crystal structure is found, but with very fine grains. Columnar grains about 100 A in diameter were separated by a less dense grain-boundary network about 10-A wide. The measured optical conductivity agrees with an inhomogeneous-medium model that assumes the normal crystalline conductivity for the grain interiors, with model parameters that correlate to the observed columnar grain size. In contrast, V and Nb films rapidly evaporated onto room-temperature substrates have the reflectance of bulk crystalline material. On liquid-nitrogen temperature substrates, however, V and Nb have normal bcc crystal structure but with small flat-plate grains, and the same model, with appropriate parameters, accounts for the optical conductivity. The difference between these two groups apparently depends on residual gases segregated at the grain boundaries in the Cr-group films.

Nestell, J. E., Jr.↗