Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Resonant and random excitations on the proton beam in the Large Hadron Collider for active halo control with pulsed hollow electron lenses

We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is being considered. In standard electron-lens operation, a proton bunch sees the same electron current at every revolution. Pulsed electron beam operation (i.e., different currents for different turns) is also considered, because it can widen the range of achievable halo removal rates. For an axially symmetric electron beam, only protons in the halo are excited. If a residual field is present at the location of the beam core, these particles are exposed to time-dependent transverse kicks and to noise. We discuss the numerical simulations and the experiments conducted in 2016 and 2017 at injection energy in the LHC. The excitation patterns were generated by the transverse feedback and damping system, which acted as a flexible source of dipole kicks. Proton beam losses, emittances, and transverse distributions were recorded as a function of excitation patterns and strengths. The resonant excitations induced rich dynamical effects and nontrivial changes of the beam distributions, which, to our knowledge, have not previously been observed and studied in this detail. We conclude with a discussion of the tolerable and achievable residual fields and proposals for further studies.

43 PARTICLE ACCELERATORS↗

Transport and Fate of Natural Gas and Brine Escaping from a Hydrocarbon Reservoir Through a Failed Deepwater Well in the Oceanic Subsurface of the Gulf of Mexico

The possibility of broaching, or the release of fluids at the seafloor due to a damaged or faulty well, is a hazard that must be assessed in the well permitting process. Here, this paper describes a numerical simulation study of a real-life scenario where a complex, permeable sandy formation, connected to the seafloor via known chimneys/seeps, is intersected by a damaged production well that drains another deeper, gas-bearing formation. The objective of the study is to determine the transport and fate of hydrocarbon reservoir fluids (gas and brines) escaping into the sandy formation through the casing shoe of the failed well, and to determine the time it takes for these contaminants to reach the ocean floor. We conducted a detailed simulation study to represent the conditions, properties, and behavior of the system under such failure conditions, and we investigated the migration of gas and brine for a range of reservoir and chimney properties. A key conclusion is that, for such complex systems, modeling the three-dimensional geometry of the system in detail is the key to describing transport and assessing the time and magnitude of potential releases. For the system studied here, transport times range from under 2 years (highest permeabilities) to many decades, ensuring significant time to respond to potential broaching hazards. Lastly, under the conditions investigated in this study, we also determine that gas-dominated releases associated with low rates of water flow into the sandy formation are likely to cause hydrate formation that can reduce permeabilities in the colder, upper regions of the chimneys and possibly mitigate releases.

58 GEOSCIENCES↗

EGS Collab Project: Accomplishments and Plan

To better understand stimulation and inter-well flow in crystalline rock with the goal of developing and improving subsurface heat exchangers for enhanced geothermal energy recovery, the EGS (Enhanced Geothermal Systems) Collab project is developing highly monitored, well- characterized intermediate scale (~10-20 m) field test beds, stimulating, and performing flow tests. These tests provide the ability to evaluate concepts, data to test and validate models, and tools to be used for EGS development, which may be evaluated at DOE’s Frontier Observatory for Research in Geothermal Energy (FORGE) project. Numerical simulation is key to the project, for experiment design and interpretation of results. Testbed characterization included optical and acoustic televiewers, full waveform seismic, electromagnetic, gamma, and temperature. The test block was further characterized using seismic tomography (p- and s-), electrical resistance tomography (ERT), and hydrologic characterization including tracer tests. Coupled process models are constrained by the detailed site characterization data. Installed monitoring systems include: 1) passive seismic/acoustic emissions; 2) continuous active source seismic; 3) ERT, with dynamic imaging using high contrast fluids; and 4) distributed acoustic, temperature, and strain fiber optic sensors. During flow and stimulation tests, fracture aperture strain monitoring is performed using the Step-rate Injection Method for Fracture In-situ Properties (SIMFIP) tool. Pressure and flow in the injection and production boreholes are monitored, and tracer tests and wavefield imaging and inversion are performed to provide additional constraints. Stimulations have been performed at several locations, connecting our injection and production wells. An overview of the EGS Collab project is presented to provide a framework for other EGS Collab presentations, along with results from numerical simulations and experiments performed at the Sanford Underground Research Facility in South Dakota.

Enhanced Geothermal Systems, EGS Collab, stimulati↗

Measurement of pulsed-power-driven magnetic fields via proton deflectometry

Measuring magnetic field and current distribution in Z-pinch plasma systems is crucial to the validation of Z-pinch theory. In this letter, the demonstration of proton deflectometry to pulsed-power-driven loads at the mega-amp scale is presented, which is capable of making more detailed field maps in high-density regions of plasmas. In this method, a laser-driven, broad-spectrum, MeV-energy proton beam is directed through a pulsed-power-driven plasma system, and the resulting deflections are measured to examine configuration of magnetic fields and to infer the currents that support them. The technique was first demonstrated on simple short-circuit loads, and the results are in excellent agreement with numerical simulations providing reliable estimates of the field and current configurations. It was then applied to a more complex—radial foil—plasma load. The measurements show unexpected proton deflections that exhibit the complexity of the plasma load and that with further analysis will reveal details about the current and magnetic field topology in this complex configuration.

Mariscal, D.↗

Effect of Cr Spacer on Structural and Magnetic Properties of Fe/Gd Multilayers

Here, we analyze the role of a thin Cr spacer between Fe and Gd layers on the structure and magnetic properties of a [Fe(35 Å)/Cr(t Cr )/Gd(50 Å)/Cr(t Cr )] 12 superlattice. Samples without the Cr spacer (t Cr = 0) and with a thin spacer (t Cr = 4 Å) are investigated using X-ray diffraction, polarized neutron and resonance X-ray magnetic reflectometry, static magnetometry, magneto-optical Kerr effect, and ferromagnetic resonance techniques. Magnetic properties are studied experimentally in a wide temperature range 4–300 K and analyzed theoretically using numerical simulation on the basis of the mean-field model. We show that a reasonable agreement with the experimental data can be obtained considering temperature dependence of the effective field parameter in gadolinium layers. In conclusion, the analysis of the experimental data shows that besides a strong reduction of the antiferromagnetic coupling between Fe and Gd, the introduction of Cr spacers into Fe/Gd superlattice leads to modification of both structural and magnetic characteristics of the ferromagnetic layers.

36 MATERIALS SCIENCE↗

Gravitational Waves from F-modes Excited by the Inspiral of Highly Eccentric Neutron Star Binaries

As gravitational wave instrumentation becomes more sensitive, it is interesting to speculate about subtle effects that could be analyzed using upcoming generations of detectors. One such effect that has great potential for revealing the properties of very dense matter is fluid oscillations of neutron stars. These have been found in numerical simulations of the hypermassive remnants of double neutron star mergers and of highly eccentric neutron star orbits. Here we focus on the latter and sketch out some ideas for the production, gravitational-wave detection, and analysis of neutron star oscillations. These events will be rare (perhaps up to several tens per year could be detected using third-generation detectors such as the Einstein Telescope or the Cosmic Explorer), but they would have unique diagnostic power for the analysis of cold, catalyzed, dense matter. Furthermore, these systems are unusual in that analysis of the tidally excited f-modes of the stars could yield simultaneous measurements of their masses, moments of inertia, and tidal Love numbers, using the frequency, damping time, and amplitude of the modes. They would thus present a nearly unique opportunity to test the I-Love-Q relation observationally. The analysis of such events will require significant further work in nuclear physics and general relativistic nonlinear mode coupling, and thus we discuss further directions that will need to be pursued. For example, we note that for nearly grazing encounters, numerical simulations show that the energy delivered to the f-modes may be up to two orders of magnitude greater than predicted in the linear theory.

79 ASTRONOMY AND ASTROPHYSICS↗

Asymptotic behavior of the mixed mass in Rayleigh–Taylor and Richtmyer–Meshkov instability induced flows

Rayleigh–Taylor instability (RTI) and Richtmyer–Meshkov instability (RMI) are serious practical issues in inertial confinement fusion research, and also have relevance to many cases of astrophysical fluid dynamics. So far, much of the attention has been paid to the late-time scaling of the mixed width, which is used as a surrogate to how well the fluids have been mixed. Yet, the actual amount of mixed mass could be viewed as a more direct indicator on the evolution of the mixing layers due to hydrodynamic instabilities. Despite its importance, there is no systematic study as yet on the scaling of the mixed mass for either the RTI or the RMI induced flow. In this article, the normalized mixed mass (Ψ) is introduced for measuring the efficiency of the mixed mass. Six large numerical simulation databases have been employed: the RTI cases with heavy-to-light fluid density ratios of 1.5, 3, and 9; the single shock RMI cases with density ratios of 3 and 20; and a reshock RMI case with density ratio of 3. Using simulated flow fields, the normalized mixed mass Ψ is shown to be more sensitive in discriminating the variation with Atwood number for the RTI flows. Moreover, Ψ is demonstrated to provide more consistent results for both the RTI and RMI flows when compared with the traditional mixedness parameters, Ξ and Θ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

What Controls the Entrainment Rate of Dry Buoyant Thermals with Varying Initial Aspect Ratio?

Here, this study uses theory and numerical simulations to analyze the nondimensional spreading rate a (change in radius with height) of buoyant thermals as they rise and entrain surrounding environmental fluid. A focus is on how a varies with initial thermal aspect ratio A r , defined as height divided by width of the initial buoyancy perturbation. An analytic equation for thermal ascent rate w t that depends on a is derived from the thermal-volume-averaged momentum bud get equation. The thermal top height when w t is maximum, defining a critical height z c , is inversely proportional to a. The height z c also corresponds to the thermal top height when buoyant fluid along the thermal’s vertical axis is fully replaced by entrained nonbuoyant environmental fluid rising from below the thermal. The time scale for this process is controlled by the vertical velocity of parcels rising upward through the thermal’s core. This parcel vertical velocity is approximated from Hill’s analytic spherical vortex, yielding an analytic inverse relation between a and A r . Physically, this a–A r relation is connected to changes in circulation as A r is modified. Numerical simulations of thermals with A r varied from 0.5 to 2 give a values close to the analytic theoretical relation, with a factor of ~3 decrease in a as A r is increased from 0.5 to 2. The theory also explains why a of initially spherical thermals from past laboratory and modeling studies is about 0.15. Overall, this study provides a theoretical underpinning for understanding the entrainment behavior of thermals, relevant to buoyantly driven atmospheric flows.

54 ENVIRONMENTAL SCIENCES↗

Performance metrics for inertial confinement fusion implosions: Aspects of the technical framework for measuring progress in the National Ignition Campaign

The National Ignition Campaign (NIC) uses non-igniting 'tritium hydrogen deuterium (THD)' capsules to study and optimize the hydrodynamic assembly of the fuel without burn. These capsules are designed to simultaneously reduce DT neutron yield and to maintain hydrodynamic similarity with the DT ignition capsule. We will discuss nominal THD performance and the associated experimental observables. We will show the results of large ensembles of numerical simulations of THD and DT implosions and their simulated diagnostic outputs. These simulations cover a broad range of both nominal and off-nominal implosions. We will focus on the development of an experimental implosion performance metric called the experimental ignition threshold factor (ITFX). We will discuss the relationship between ITFX and other integrated performance metrics, including the ignition threshold factor (ITF), the generalized Lawson criterion (GLC), and the hot spot pressure (HSP). We will then consider the experimental results of the recent NIC THD campaign. We will show that we can observe the key quantities for producing a measured ITFX and for inferring the other performance metrics. We will discuss trends in the experimental data, improvement in ITFX, and briefly the upcoming tuning campaign aimed at taking the next steps in performance improvement on the path to ignition on NIF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Self-assembly of a drop pattern from a two-dimensional grid of nanometric metallic filaments

We report experiments, modeling, and numerical simulations of the self–assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO 2 flat surface, and then they are melted by laser irradiation with ~18-ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear array of drops along each side of the squares. The experimental data provide a series of SEM images of the resultant morphology as a function of the number of laser pulses or cumulative liquid lifetime. These data are analyzed in terms of fluid mechanical models that account for mass conservation and consider flow evolution with the aim to predict the final number of drops resulting from each side of the square. The aspect ratio, δ, between the square sides' lengths and their widths is an essential parameter of the problem. Our models allow us to predict the δ intervals within which a certain final number of drops are expected. The comparison with experimental data shows a good agreement with the model that explicitly considers the Stokes flow developed in the filaments neck region that lead to breakup points. Furthermore, numerical simulations that solve the Navier-Stokes equations along with slip boundary condition at the contact lines are implemented to describe the dynamics of the problem.

42 ENGINEERING↗

Classification of Orbits in Poincare Maps Using Machine Learning

Poincare plots, also called Poincare maps, are used by plasma physicists to understand the behavior of magnetically confined plasma in numerical simulations of a tokamak. These plots are created by the intersection of field lines with a two-dimensional poloidal plane that is perpendicular to the axis of the torus representing the tokamak. A plot is composed of multiple orbits, each created by a different field line as it goes around the torus. Each orbit can have one of four distinct shapes, or classes, that indicate changes in the topology of the magnetic fields confining the plasma. Given the (x, y) coordinates of the points that form an orbit, the analysis task is to assign a class to the orbit, a task that appears ideally suited for a machine learning approach. In this paper, we describe how we overcame two major challenges in solving this problem - creating a high-quality training set, with few mislabeled orbits, and converting the coordinates of the points into features that are discriminating, despite the variation within the orbits of a class and the apparent similarities between orbits of different classes. Our automated approach is not only more objective and accurate than visual classification, but is also less tedious, making it easier for plasma physicists to analyze the topology of magnetic fields from numerical simulations of the tokamak.

97 MATHEMATICS AND COMPUTING↗

Nonlinear dynamics and dissipation of a curvilinear vortex driven by a strong time-dependent Meissner current

Here, we report numerical simulations of large-amplitude oscillations of a trapped vortex line under a strong ac magnetic field $\textit{H(t) = H}$ sin$\textit{ωt}$ parallel to the surface. The power dissipated by an oscillating vortex segment driven by the surface ac Meissner currents was calculated by taking into account the nonlinear vortex line tension, vortex mass, and a nonlinear Larkin-Ovchinnikov (LO) viscous drag coefficient $\textit{η(v)}$. We show that the LO decrease of $\textit{η(v)}$ with the vortex velocity $\textit{v}$ can radically change the field dependence of the surface resistance R i ( H ) caused by trapped vortices. At low frequencies, $R_i(H)$ exhibits a conventional increase with $\textit{H}$, but as $\textit{ω}$ increases, the surface resistance becomes a nonmonotonic function of $\textit{H}$ which decreases with $\textit{H}$ at higher fields. The effects of frequency, pin spacing, and the mean-free path $l_i$ on the field dependence of $R_i(H)$ were calculated. It is shown that, as the surface gets dirtier and $l_i$ decreases, the anomalous drop of $R_i(H)$ with $\textit{H}$ shifts to lower fields which can be much smaller than the lower critical magnetic field. Our numerical simulations also show that the LO decrease of $\textit{η(v)}$ with $\textit{v}$ can cause a vortex bending instability at high field amplitudes and frequencies, giving rise to the formation of dynamic kinks along the vortex. Measurements of $R_i(H)$ caused by sparse vortices trapped perpendicular to the surface can offer opportunities to investigate an extreme nonlinear dynamics of vortices driven by strong current densities up to the depairing limit at low temperatures. The behavior of $R_i(H)$, which can be tuned by varying the rf frequency or concentration of nonmagnetic impurities, is not masked by strong heating effects characteristic of dc or pulse transport measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Unsteady deflagration speed of an auto-ignitive dimethyl-ether (DME)/air mixture at stratified conditions

The propagation speed of an auto-ignitive dimethyl-ether (DME)/air mixture at elevated pressures and subjected to monochromatic temperature oscillations is numerically evaluated in a one-dimensional statistically stationary configuration using fully resolved numerical simulations with reduced kinetics and transport. Two sets of conditions with temperatures within and slightly above the negative temperature coefficient (NTC) regime are simulated to investigate the fundamental aspects of auto-ignition and flame propagation along with the transition from auto-ignitive deflagration to spontaneous propagation regimes under thermal stratification. Contrary to the standard laminar flame speed, the steady propagation speed of an auto-ignitive front is observed to scale proportionally to its level of upstream reactivity. It is shown that this interdependence is primarily influenced by the characteristic residence time and the homogeneous auto-ignition delay. Furthermore, the unsteady reaction front in either of the two cases responds distinctly to the imposed stratification. Specifically, the results in both cases show that the dynamic flame response depends on the mean temperature at the flame base Tb and the time-scale of thermal stratification. It is also found that, based on Tb and the propensity of the mixture to two-stage chemistry, the instantaneous peak propagation speed and the overall time taken to achieve that speed differs considerably. A displacement speed analysis is carried out to elucidate the underlying combustion modes that are responsible for such a variation in flame response.

Energy & Fuels↗

Finding the first cosmic explosions. IV. 90–140 M{sub ⊙} pair-instability supernovae

Population III stars that die as pair-instability supernovae are usually thought to fall in the mass range of 140–260 M{sub ⊙}. But several lines of work have now shown that rotation can build up the He cores needed to encounter the pair instability at stellar masses as low as 90 M{sub ⊙}. Depending on the slope of the initial mass function of Population III stars, there could be 4–5 times as many stars from 90–140 M{sub ⊙} in the primordial universe as in the usually accepted range. We present numerical simulations of the pair-instability explosions of such stars performed with the MESA, FLASH, and RAGE codes. We find that they will be visible to supernova factories such as Pan-STARRS and LSST in the optical out to z ∼ 1–2 and to James Webb Space Telescope and the 30 m class telescopes in the near-infrared (NIR) out to z ∼ 7–10. Such explosions will thus probe the stellar populations of the first galaxies and cosmic star formation rates in the era of cosmological reionization. These supernovae are also easily distinguished from more massive pair-instability explosions, underscoring the fact that there is far greater variety to the light curves of these events than previously understood.

79 ASTRONOMY AND ASTROPHYSICS↗

Application of the new IAPWS Guideline on the fast and accurate calculation of steam and water properties with the Spline-Based Table Look-Up Method (SBTL) in RELAP-7

The numerical simulation of thermalhydraulic processes in nuclear power plants requires very accurate and extremely fast algorithms for calculating the thermophysical properties of water and steam. In order to provide such algorithms, the International Association for the Properties of Water and Steam (IAPWS) has adopted the new “IAPWS Guideline on the Fast Calculation of Steam and Water Properties with the Spline-Based Table Look-Up Method (SBTL)”. In this article, the SBTL method is applied to property functions of specific volume and specific internal energy (v,e) based on the scientific formulation IAPWS-95 and the latest IAPWS formulations for transport properties. From the newly generated SBTL functions, thermodynamic and transport properties as well as their derivatives and inverse functions are calculable in the fluid range of state for pressures up to 100 MPa and for temperatures up to 1273 K, including the metastable liquid and the metastable vapor regions. The SBTL functions reproduce the underlying formulations with an accuracy of 10–100 ppm and significantly reduced computing times. The SBTL method has been implemented into the nuclear reactor system safety analysis code RELAP-7 [2] to consider the real fluid behavior of water and steam in a novel 7-equation two-phase flow model.

42 ENGINEERING↗

Shock compression behavior of stainless steel 316L octet-truss lattice structures

Lattice structures offer desirable mechanical properties for applications of energy absorption and impact mitigation but limited research has been carried out on their shock compression behavior. In this work, the shock compression behavior of stainless steel 316L (SS316L) octet-truss lattice structures was investigated through experimental techniques and numerical simulations. Plate impact experiments with high-speed imaging were conducted at impact velocities of 270 – 390 m/s on lattice specimens with 5x5x10 unit cell geometries additively manufactured (AM) using direct metal laser sintering. High-speed imaging together with digital image correlation was used to extract full-field measurements and define a two-wave structure consisting of an elastic wave and planar compaction (shock) wave which propagated along the impact direction. A linear shock velocity versus particle velocity relation was found to approximate the measurements with a unit slope and a linear fit constant equal to the crushing speed. Furthermore, the shock velocity versus particle velocity relation, full-field measurements, and elastic limit together with the Eulerian form of the Rankine-Hugoniot jump conditions were used to find relations for the stress and internal energy behind the shock. Stress behind the shock increased with relative density and particle velocity, and specific internal energy converged to a single curve similar to that of bulk AM SS316L. Explicit finite element analysis using the Johnson-Cook constitutive model demonstrated similar shock behavior observed in experiments and a linear shock velocity versus particle velocity relation and corresponding Hugoniot calculations were found to be in agreement with experimental results. Numerical simulations confirmed negligible effects of exterior versus interior measurements and further validated the application of one-dimensional shock theory.

42 ENGINEERING↗

Spatiotemporal dynamics of a digital phase-locked loop based coupled map lattice system

We explore the spatiotemporal dynamics of a coupled map lattice (CML) system, which is realized with a one dimensional array of locally coupled digital phase-locked loops (DPLLs). DPLL is a nonlinear feedback-controlled system widely used as an important building block of electronic communication systems. We derive the phase-error equation of the spatially extended system of coupled DPLLs, which resembles a form of the equation of a CML system. We carry out stability analysis for the synchronized homogeneous solutions using the circulant matrix formalism. It is shown through extensive numerical simulations that with the variation of nonlinearity parameter and coupling strength the system shows transitions among several generic features of spatiotemporal dynamics, viz., synchronized fixed point solution, frozen random pattern, pattern selection, spatiotemporal intermittency, and fully developed spatiotemporal chaos. We quantify the spatiotemporal dynamics using quantitative measures like average quadratic deviation and spatial correlation function. We emphasize that instead of using an idealized model of CML, which is usually employed to observe the spatiotemporal behaviors, we consider a real world physical system and establish the existence of spatiotemporal chaos and other patterns in this system. We also discuss the importance of the present study in engineering application like removal of clock-skew in parallel processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Jetting Response in Architected Structures

Architected structures are gaining prominence for structural applications as the additive manufacturing technologies that can enable such materials mature. With the expanded design space, such mesoscopic structures occupy the middle ground between random foams and bulk materials. Studies into the deformation response of such structures are limited, particularly under dynamic compression. Early studies indicate the presence of an elastic precursor wave running ahead of the compaction wave. Additional studies also have shown that jetting is known to occur under shock loading conditions due to the presence of geometric perturbations introduced in the long-range periodic structures. Given that starting point, the motivation for this research was to understand the origin of the observed jetting and extend our understanding of how this comes about across a broad spectrum of lattice types, material compositions, length scales, and dynamic loading conditions. The jetting behavior due to lattice structures was studied through a series of dynamic compression plate impact experiments with in-situ x-ray imaging. This work was enabled by the NNSA-funded Dynamic Compression Sector at the Advanced Photon Source, which is housed at Argonne National Laboratory. Prior studies, and also evident in this work, have shown that deformation mechanisms in architected structures are difficult to study using our traditional diagnostics, and the role of in situ observations in this regard cannot be overstated. The role of the impact conditions, the lattice spacing, the lattice architecture, and the lattice base material was explored in the context of promoting or suppressing jet formation. A transition from latticeled to impactor-led jetting is observed above a certain impact threshold. Complementary direct numerical simulations (DNS) were also performed to compare with the experiments, study the underlying stress state giving rise to jetting, and provide insight for conditions not studied experimentally. Such simulations suggest certain trends for promoting or suppressing jetting akin to traditional Richtmyer-Meshkov instability studies. We present a geometric argument to explain the competitive process leading to lattice and/or impactor jetting which incorporates base material properties, the periodicity of the lattice, and basic tunable length scales of the lattice. Our results are consistent with previous observations on such lattices. Expanding on that work, the emergence of a transition of the jet material composition must depends solely on the base material properties and the geometric arrangement of the lattice structure. The fact that we have obtained reasonable qualitative and quantitative agreement regarding the jet formation and propagation behavior leads us to trust the underlying materials models. We can speculate that this and potentially other emergent phenomena might also be possible from a unique combination of base material properties and geometric arrangement of lattice structures. While the transition from polymer-led to flyer-led jetting might seem counterintuitive at first, it is a natural extension of the impact conditions and the arrangement of the materials. Better understanding of how the base material properties are coupled to the lattice structure to give rise to such phenomena will likely improve design for such structures under dynamic compression conditions. As such, the direct numerical simulations provide a pathway to design of architectures in future applications.

36 MATERIALS SCIENCE↗