Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ultraviolet to far-infrared dielectric function of n -doped cadmium oxide thin films

Spectroscopic ellipsometry and Fourier transform infrared spectroscopy were applied to extract the ultraviolet to far-infrared (150 – 33333 cm -1 ) complex dielectric functions of high-quality, sputtered indium-doped cadmium oxide (In:CdO) thin crystalline films on MgO substrates possessing carrier densities (N d ) ranging from 1.1 x 10 19 cm -1 to 4.1 x 10 20 cm -1 . A multiple oscillator fit model was used to identify and analyze the three major contributors to the dielectric function and their dependence on doping density: interband transitions in the visible, free-carrier excitations (Drude response) in the near- to far-infrared, and IR-active optic phonons in the far-infrared. More specifically, values pertinent to the complex dielectric function such as the optical band gap (E g ), are shown here to be dependent upon carrier density, increasing from approximately 2.5–3 eV, while the high-frequency permittivity (ε ∞ ) decreases from 5.6 to 5.1 with increasing carrier density. The plasma frequency (ω p ) scales as $\sqrt{N_d}$, resulting in ω p values occurring within the mid- to near-IR, and the effective mass (m *) was also observed to exhibit doping density-dependent changes, reaching a minimum of 0.11 m o in unintentionally doped films (1.1 x 10 19 cm -1 ). Good quantitative agreement with prior work on polycrystalline, higher-doped CdO films is also demonstrated, illustrating the generality of the results. The analysis presented here in this paper will aid in predictive calculations for CdO-based next-generation nanophotonic and optoelectronic devices, while also providing an underlying physical description of the key properties dictating the dielectric response in this atypical semiconductor system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Probing the electronic properties of gap states near the surface of n -SrTiO 3-δ / i -Si (001) heterojunctions with high sensitivity

We have measured soft x-ray resonant photoemission for the n–SrTiO 3–δ /i–Si⁡(001) (δ=~0.0003) hybrid semiconductor heterojunction with the goal of probing occupied electronic states in the band gap near the surface. By utilizing both swept energy, angle-integrated and fixed-energy, and angle-resolved spectroscopies, we identify the atomic and orbital character of the in-gap state as well as the different electronic phases that contribute to it. Specifically, we isolate the state associated with trapped charge on the n–SrTiO 3–δ surface that causes surface depletion from the localized gap state resulting from electron correlation effects in the complex oxide. Using an x-ray energy close to select dipole allowed TiL 3 → 3⁢d x-ray absorption resonances results in a 40-fold increase in sensitivity. Furthermore, this feature makes photoemission possible when probing electrons from dopants at concentrations as low as a few hundredths of a percent.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ab initio prediction of FeCr sigma (001)/FCC Fe(111) interfacial energy: Effect of interfacial doping of C, B, and N

Interfacial energy plays a crucial role for high-temperature material systems in determining their microstructure evolution and mechanical properties. Optimizing the interfacial energy through doping can improve the stability, performance, and overall functionality of these materials. Here, the present study delivers theoretical investigation on the sigma FeCr (001)//FCC Fe (111) interfacial energy using ab initio methods, focusing on the implications of interfacial doping with important interstitial elements carbon (C), boron (B), and nitrogen (N). The calculated interfacial energy without doping is 0.183J/m 2 . Upon doping, notable reductions in interfacial energy were observed. Doping with B decreased the interfacial energy to 0.046J/m 2 , with single C doping to 0.126J/m 2 , with two C doping to 0.098J/m 2 , and with a single N doping to 0.071J/m 2 . These findings not only shed light on the atomistic origin for the effect of stabilizing the microstructure of stainless steel at elevated temperatures by interstitial doping, but also present a systematic, thorough ab initio approach to predict interfacial doping properties and guide alloy design to enhance the performance and stability.

FeCr sigma phase↗
DOE OSTI2024

Crystal structure of N-terminally hexahistidine-tagged Onchocerca volvulus macrophage migration inhibitory factor-1

Onchocerca volvulus causes blindness, onchocerciasis, skin infections and devastating neurological diseases such as nodding syndrome. New treatments are needed because the currently used drug, ivermectin, is contraindicated in pregnant women and those co-infected with Loa loa . The Seattle Structural Genomics Center for Infectious Disease (SSGCID) produced, crystallized and determined the apo structure of N-terminally hexahistidine-tagged O. volvulus macrophage migration inhibitory factor-1 (His- Ov MIF-1). Ov MIF-1 is a possible drug target. His- Ov MIF-1 has a unique jellyfish-like structure with a prototypical macrophage migration inhibitory factor (MIF) trimer as the `head' and a unique C-terminal `tail'. Deleting the N-terminal tag reveals an Ov MIF-1 structure with a larger cavity than that observed in human MIF that can be targeted for drug repurposing and discovery. Removal of the tag will be necessary to determine the actual biological oligomer of Ov MIF-1 because size-exclusion chomatographic analysis of His- Ov MIF-1 suggests a monomer, while PISA analysis suggests a hexamer stabilized by the unique C-terminal tails.

Kimble, Amber D. (ORCID:0000000167851596)↗
DOE OSTI2020

Crystal structure of bis(1-mesityl-1 H -imidazole-κ N 3 )diphenylboron trifluoromethanesulfonate

The solid-state structure of bis(1-mesityl-1 H -imidazole-κ N 3 )diphenylboron trifluoromethanesulfonate, C 36 H 38 BN 4 + ·CF 3 SO 3 − or ( Ph 2 B(MesIm) 2 OTf ), is reported. Bis(1-mesityl-1 H -imidazole-κ N 3 )diphenylboron ( Ph 2 B(MesIm) 2 + ) is a bulky ligand that crystallizes in the orthorhombic space group Pbcn . The asymmetric unit contains one Ph 2 B(MesIm) 2 + cationic ligand and one trifluoromethanesulfonate anion that balances the positive charge of the ligand. The tetrahedral geometry around the boron center is distorted as a result of the steric bulk of the phenyl groups. Weak interactions, such as π–π stacking are present in the crystal structure.

Kouton, Aniffa↗
DOE OSTI2021

Crystal structure of [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 : a discrete molecular capsule built from multinuclear organothorium cluster cations

An unusually large and structurally complex charge-neutral polynuclear cluster, hexa-μ 2 -azido-di-μ 3 -chlorido-hexa-μ 2 -hydroxido-di-μ 3 -oxido-hexakis(pentamethylcyclopentadienyl)hexathorium–diethyl ether–tetrahydrofuran (1/0.56/1.44), [Th 3 (C 10 H 15 ) 6 Cl 3 (N 3 ) 6 (OH) 6 O 2 ]·0.56C 4 H 10 O·1.44C 4 H 8 O or [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 ·0.56C 4 H 10 O·1.44C 4 H 8 O (Cp* = [pentamethylcyclopentadienyl]) − , has been crystallized as a mixed tetrahydrofuran/diethyl ether solvate and structurally characterized. The molecule contains a number of unusual features, the most notable being a finite yet exceptionally long cyclic metal-azido chain. These rare features are the consequence of both sterically protecting Cp* ligands and highly bridging oxide and hydroxide ligands in the same system and illustrate the interesting new possibilities that can arise from combining organometallic and solvothermal f -block element chemistry.

Kelley, Steven P.↗
DOE OSTI2020

Mitigating Process Induced Degradation in p- and n-Czochralski Silicon Wafers with Tabula Rasa

We report on the bulk properties of of n- and p- type Czochralski silicon (Cz-Si) after a high-temperature annealing process known as Tabula Rasa (TR), which is primarily used to annihilate oxygen precipitates. We find significant differences in n- and p-type substrates as well as a strong dependence on the ambient in the resulting process induced degradation. We attribute this ambient dependence to either injection of interstitials or vacancies into the bulk during TR. Finally, we show that subsequent gettering is enhanced due to the annihilation of oxygen precipitates.

14 SOLAR ENERGY↗
DOE OSTI2020

Sulfurization as a promising surface passivation approach for both n- and p-type Si

Sulfur is shown to be an effective and promising surface passivation element for both n- and p-type Si wafers after reacting in dilute hydrogen sulfide gas (2 - 6% in argon) at 550°C. Effective minority carrier lifetimes of > 2 ms and > 0.25 ms are achieved for n- and p-type Si wafers, respectively, comparable to the industry standard thermal oxide and atomic layer deposited aluminum oxide passivation level. Surface characterization by x-ray photoelectron and emission spectroscopy reveals that sulfur is primarily bonded in a sulfide environment.

42 ENGINEERING↗
DOE OSTI2023

Critical Current Densities and n-Values of MgB 2 Conductors for SMES, MRI, and Low AC Loss Applications

Multifilamentary MgB 2 strands (filament numbers 36 to 114) prepared by the in-situ power-in-tube (PIT) route with carbon doping contents of 0, 2, and 3.2% were wound on barrels for transport J c and n -value measurement at 4.2 K in fields of up to 12 T. The strand and gauge lengths were 1 m and 0.5 m. Heat treatments at 675 °C and 650 °C centered around the melting point of Mg (650 °C) and both utilized the liquid-solid reaction. A pair of strands, with and without 2% C doping exhibited the J c (B) crossover effect. Here studied were the dependencies of J c on field strength, dopant concentration, and cabling and the dependence of n -value on field strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Measurements of He-Ar, He-N 2 , and He-air thermal creep slip and accommodation coefficients at high temperatures

Understanding gas flows in capillaries has many applications in modeling the transport of gases in nano-structured, porous, or fractured media. A network of capillaries can often approximate these media, and also information on gas-surface interactions obtained from capillary experiments can be used for modeling flows in these media. Experimental data on flows of different mixtures of He-Ar, He-N 2 , and He-air in the slip regime and in stainless steel capillaries at high temperatures were obtained by using a two-bulb apparatus. An accurate expression for the thermal creep slip coefficients with the Lennard-Jones potential parameters and diffuse-specular reflection gas-surface interaction conditions were then used to obtain the accommodation coefficients for the different gases. The experimental data are best described with values of accommodation coefficients in the range of 0.1–0.3 for He and 0.5–1.0 for Ar, N 2 , and air. Further, the use of values in this range is suggested for modeling gaseous flows in capillaries and nano-structured, porous, or fractured media if other direct measured values for a particular medium are unavailable.

42 ENGINEERING↗
DOE OSTI2022

Alkali metal halide–coated perovskite redox catalysts for anaerobic oxidative dehydrogenation of n -butane

Oxidative dehydrogenation (ODH) of n-butane has the potential to efficiently produce butadiene without equilibrium limitation or coke formation. Despite extensive research efforts, single-pass butadiene yields are limited to <23% in conventional catalytic ODH with gaseous O 2 . This article reports molten LiBr as an effective promoter to modify a redox-active perovskite oxide, i.e., La 0.8 Sr 0.2 FeO 3 (LSF), for chemical looping–oxidative dehydrogenation of n-butane (CL-ODHB). Under the working state, the redox catalyst is composed of a molten LiBr layer covering the solid LSF substrate. Characterizations and ab initio molecular dynamics (AIMD) simulations indicate that peroxide species formed on LSF react with molten LiBr to form active atomic Br, which act as reaction intermediates for C–H bond activation. Meanwhile, molten LiBr layer inhibits unselective CO 2 formation, leading to 42.5% butadiene yield. The redox catalyst design strategy can be extended to CL-ODH of other light alkanes such as iso-butane conversion to iso-butylene, providing a generalized approach for olefin production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lithium-compatible and air-stable vacancy-rich Li 9 N 2 Cl 3 for high–areal capacity, long-cycling all–solid-state lithium metal batteries

Attaining substantial areal capacity (>3 mAh/cm 2 ) and extended cycle longevity in all–solid-state lithium metal batteries necessitates the implementation of solid-state electrolytes (SSEs) capable of withstanding elevated critical current densities and capacities. In this study, we report a high-performing vacancy-rich Li 9 N 2 Cl 3 SSE demonstrating excellent lithium compatibility and atmospheric stability and enabling high–areal capacity, long-lasting all–solid-state lithium metal batteries. The Li 9 N 2 Cl 3 facilitates efficient lithium-ion transport due to its disordered lattice structure and presence of vacancies. Notably, it resists dendrite formation at 10 mA/cm 2 and 10 mAh/cm 2 due to its intrinsic lithium metal stability. Furthermore, it exhibits robust dry-air stability. Incorporating this SSE in Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathode-based all–solid-state batteries, we achieve substantial cycling stability (90.35% capacity retention over 1500 cycles at 0.5 C) and high areal capacity (4.8 mAh/cm 2 in pouch cells). These findings pave the way for lithium metal batteries to meet electric vehicle performance demands.

25 ENERGY STORAGE↗
DOE OSTI2021

The diphoton $$q_T$$ spectrum at N$$^3$$LL$$^\prime $$ + NNLO

Abstract We present a $$q_T$$ q T -resummed calculation of diphoton production at order N $$^3$$ 3 LL $$^\prime $$ ′ + NNLO. To reach the primed level of accuracy we have implemented the recently published three-loop $${\mathcal {O}}(\alpha _s^3)$$ O ( α s 3 ) virtual corrections in the $$q\bar{q}$$ q q ¯ channel and the three-loop transverse momentum dependent beam functions and combined them with the existing infrastructure of , a code performing resummation at order N $${}^3$$ 3 LL. While the primed predictions are parametrically not more accurate, one typically observes from lower orders and other processes that they are the dominant effect of the next order. We include in both the $$q\bar{q}$$ q q ¯ and loop-induced gg channel the hard contributions consistently together at order $$\alpha _s^3$$ α s 3 and find that the resummed $$q\bar{q}$$ q q ¯ channel without matching stabilizes indeed. Due to large matching corrections and large contributions and uncertainties from the gg channel, the overall improvements are small though. We furthermore study the effect of hybrid-cone photon isolation and hard-scale choice on our fully matched results to describe the ATLAS $$\text {8}$$ 8 TeV data and find that the hybrid-cone isolation worsens agreement at small $$q_T$$ q T compared to smooth-cone isolation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Supersymmetric Wilson loops on the lattice in the large N limit

We propose additional tests of holography by studying supersymmetric Wilson loops in p+1-dimensional maximally supersymmetric Yang?Mills (SYM) theories on the lattice in the large N limit. In the dual gravity description, this computation involves calculating the area of a fundamental string worldsheet in certain Type II supergravity backgrounds. Though thermodynamic observables have been computed on the lattice using Monte Carlo methods and agree with the supergravity results in various dimensions, not much has been done for the gauge-invariant operators such as the Wilson loop. We provide analytical predictions for these loops for various non-conformal Dp-brane background cases with ? ? 2 p?2 in the large N limit and comment on how these can be computed on non-orthogonal lattices in various models.

Jha, Raghav G. (ORCID:0000000329330102)↗
DOE OSTI2021

Stability of Atomically Dispersed Fe–N–C ORR Catalyst in Polymer Electrolyte Fuel Cell Environment

We have investigated the durability of a platinum group metal (PGM-)free Fe–N–C catalyst in which the Fe sites are atomically dispersed (AD), and found it to be quite stable in standard accelerated stress test (AST) cycles normally used for low-PGM catalysts: a square wave with 0.6 V lower potential limit (LPL)—0.95 V upper potential limit (UPL) with 3-s holds at UPL and LPL in H 2 /N 2 , at 1.5 atm, 80 °C and 100% RH. Considering the metrics normally employed to characterize the durability of the low-PGM catalysts after 30,000 AST cycles, this PGM-free catalyst lost <50% catalyst activity, <50% H 2 /air performance at 0.8 V, and 40 mV at 1.5 A cm -2 . However, it is less stable in H 2 /air, losing ~50% catalyst activity after just 7.5 h of polarization measurements (load cycles). In combined cycles, the majority of the loss in catalyst activity occurred during the load cycles in H 2 /air rather than AST cycles in H 2 /N 2 . We have concluded that, unlike low-PGM catalysts that lose electrochemically active surface area (ECSA) through potential cycling-induced processes, (AD)Fe–N–C catalysts degrade by processes associated with the presence of oxygen.

25 ENERGY STORAGE↗
DOE OSTI2024

Modeling aerosol transmission spectra from n(λ) and k(λ) infrared optical constants measurements of organic liquids and solids

The effects of light scattering and refraction play significantly different roles for aerosols than for bulk materials, making it challenging to identify aerosolized chemicals using traditional spectral methods or spectral reference libraries. Due to a potentially infinite number of particle morphologies, sizes, and compositions, constructing a database of laboratory-measured aerosol spectra is not a practical solution. Here, as an alternative approach, the measured n / k optical vectors of two example organic materials (diethyl phthalate and D-mannitol) are used in combination with particle absorption / scattering theory (Mie theory and FDTD) and the Beer-Lambert law to generate a series of synthetic infrared transmission / scattered light spectra. The synthetic spectra show significant differences versus simple slab transmission spectra, even for small changes in particle size (e.g., 5 vs. 10 µm) for both single particles and ensembles, potentially serving as useful reference data for aerosol sensing. For spherical single particles with diameters of 1 to 10 µm, FDTD simulations predict changes in the magnitudes of spectral shifts and the shapes of the peaks vs. particle size with only small deviations from Mie theory predictions, yet reliably capture the direction of the shifts. Typical spectral peak shifts in the longwave infrared correspond to Δλ ∼0.20 µm (∼34 cm -1 ) when compared to corresponding slab transmission spectra. Additionally, synthetic spectra generated from the n / k values derived using two different methods (KBr pellet transmission and single-angle reflectance) are compared using the Mie theory model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On the Nature of Surface Defects Found in 2/0 N-Doped 9-Cell Cavities

In this contribution, we present a systematic study on the microstructure of 1.3 GHz 9-cell TESLA type SRF cavity, processed with 2/0 Nitrogen-doping surface treatment, to explain the premature quench phenomena commonly observed in N-doping treated cavities. The microstructure characterization was carried out using Secondary electron images, advanced metallurgical techniques such as EBSD in parallel with chemical information obtained from spectroscopic techniques. The most remarkable difference is observed in the ends-cavities (1 and 9), which showed roughening of the surface, revealing a series of morphologies associated with Nb cubic phase. The cell-to-cell analysis also showed standard features such as pits with different geometry and distribution, located in grains and grain boundaries. The defects found in this system suggest that the standard electropolishing chemical etching was insufficient to eliminate history defects produced during the manufacture of the cavity, without discarding the role of the impurities, N and O, that could have induced the growth of these morphologies.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

First N-Doping and Mid-T Baking of Medium-ß 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University’s Facility for Rare Isotope Beams

Two hadron linacs currently under development in the US, the PIP-II linac at Fermi National Accelerator Laboratory (FNAL) and the upgrade for Michigan State University’s Facility For Rare Isotope Beams (FRIB), will employ 650 and 644 MHz ß-0.6 elliptical superconducting cavities respectively to meet their design energy requirements. The desired CW operation modes of these two linacs sets Q-factor requirements well above any previously achieved for cavities at this operating frequency and velocity, driving the need to explore new high-Q treatments. The N-doping technique developed at FNAL and employed at an industrial scale to the LCLS-II cryomodules is a strong candidate for high-Q treatments, but work is needed to refine the treatment to the lower operating frequency and velocity regime. We present the first results of the first N-doping tests and a "mid-T" bake test in the FRIB 644 MHz 5-cell elliptical cavities.

43 PARTICLE ACCELERATORS↗