Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Magnetic suspension and balance system advanced study, phase 2

The design improvements for the system encompass 14 or 18 external superconductive coils mounted on a 8 x 8 foot wind tunnel, a superconductive model core magnet on a holmium mandrel to fit an F-16 model, model wings of permanent magnet material Nd2Fe14B, and fiber glass epoxy structure. The Magnetic Suspension and Balance System (MSBS) advanced design is confirmed by the successful construction and test of a full size superconductive model core solenoid with holmium mandrel. The solenoid is 75 cm long and 12.6 cm in diameter and produces 6.1 tesla for a hold time of 47 minutes. An integrated coil system design of a new compact configuration without specific coils for roll or pitch shows promise of simplicity; magnet reductions of 30 percent compared to the most recent 1985 design are possible.

Boom, R. W.↗

Long and short timescale variability of magnetic activity on the BY Dra star BD+26 deg 730

BD+26 degree 730 is a very active K5V flare star with a 60 year starspot cycle. Since it is also nearly pole-on, it presents an unusual opportunity to study purely temporal evolution of magnetic activity. Contemporaneous International Ultraviolet Explorer (IUE), magnetic flux, polarimetric, and H alpha observations of the star taken over several rotational periods in 1988 are presented. When combined with older photometry, optical and IUE archive spectra, the data show a surprising lack of any activity variability on either short (few days) or long (years) timescales. The lack of variability is suggested to be due to a nearly saturated level of magnetic activity on the star, as indicated by its large magnetic filling factor.

Saar, S. H.↗

Magnetic suspension systems for space applications

An overview of techniques is presented used in the described magnetic suspension systems. Also a review is presented of the systems already developed, which demonstrate the usefulness, applicability, and flight readiness of magnetic suspension to a broad range of payloads and environments. The following subject areas are covered: programs overview; key concepts; magnetic suspension as an isolator and as a pointer; pointing and isolation systems; magnetic actuator control techniques; and test data.

Havenhill, Douglas G.↗

Magnetic suspension and balance system advanced study, 1989 design

The objectives are to experimentally confirm several advanced design concepts on the Magnetic Suspension and Balance Systems (MSBS). The advanced design concepts were identified as potential improvements by Madison Magnetics, Inc. (MMI) during 1984 and 1985 studies of an MSBS utilizing 14 external superconductive coils and a superconductive solenoid in an airplane test model suspended in a wind tunnel. This study confirmed several advanced design concepts on magnetic suspension and balance systems. The 1989 MSBS redesign is based on the results of these experiments. Savings of up to 30 percent in supporting magnet ampere meters and 50 percent in energy stored over the 1985 design were achieved.

Boom, Roger W.↗

Reduction in bearing size due to superconductors in magnetic bearings

A design concept that reduces the size of magnetic bearings is assessed. The small size will enable magnetic bearings to fit into limited available bearing volume of cryogenic machinery. The design concept, called SUPERC, uses (high Tc) superconductors or high-purity aluminum conductors in windings instead of copper. The relatively high-current density of these conductors reduces the slot radial thickness for windings, which reduces the size of the bearings. MTI developed a sizing program called SUPERC that translates the high-current density of these conductors into smaller sized bearings. This program was used to size a superconducting bearing to carry a 500 lb. load. The sizes of magnetic bearings needed by various design concepts are as follows: SUPERC design concept = 3.75 in.; magnet-bias design concept = 5.25 in.; and all electromagnet design concept = 7.0 in. These results indicate that the SUPERC design concept can significantly reduce the size of the bearing. This reduction, in turn, reduces the weight and yields a lighter bearing. Since the superconductors have inherently near-zero resistance, they are also expected to save power needed for operation considerably.

Rao, Dantam K.↗

Magnetic and electrical properties of Martian particles

The only determinations of the magnetic properties of Martian materials come from experiments on the two Viking Landers. The results suggest Martian soil containing 1 to 10 percent of a highly magnetic phase. Though the magnetic phase mineral was not conclusively identified, the predominate interpretation is that the magnetic phase is probably maghemite. The electrical properties of the surface of Mars were only measured remotely by observations with Earth based radar, microwave radiometry, and inference from radio-occultation of Mars orbiting spacecraft. No direct measurements of electrical properties on Martian materials have been performed.

Olhoeft, G. R.↗

The collective gyration of a heavy ion cloud in a magnetized plasma

In both the ionospheric barium injection experiments CRIT 1 and CRIT 2, a long duration oscillation was seen with a frequency close to the gyro frequency of barium and a time duration of about one second. A model for the phenomena which was proposed for the CRIT 1 experiment is compared to the results from CRIT 2 which made a much more complete set of measurements. The model follows the motion of a low Beta ion cloud through a larger ambient plasma. The internal field of the model is close to antiparallel to the injection direction v sub i but slightly tilted towards the self polarization direction E sub p = -V sub i by B. As the ions move across the magnetic field, the space charge is continuously neutralized by magnetic field aligned electron currents from the ambient ionosphere, drawn by the divergence in the perpendicular electric field. These currents give a perturbation of the magnetic field related to the electric field perturbation by Delta E/Delta B approximately equal to V sub A. The model predictions agree quite well with the observed vector directions, field strengths, and decay times of the electric and magnetic fields in CRIT 2. The possibility to extend the model to the active region, where the ions are produces in this type of self-ionizing injection experiments, is discussed.

Brenning, N.↗

A self-consistent two-dimensional resistive fluid theory of field-aligned potential structures including charge separation and magnetic and velocity shear

A self-consistent two-fluid theory that includes the magnetic field and shear patterns is developed to model stationary electrostatic structures with field-aligned potential drops. Shear flow is also included in the theory since this seems to be a prominent feature of the structures of interest. In addition, Ohmic dissipation, a Hall term, and pressure gradients in a generalized Ohm's law, modified for cases without quasi-neutrality, are included. In the analytic theory, the electrostatic force is balanced by field-aligned pressure gradients (i.e., thermal effects in the direction of the magnetic field) and by pressure gradients and magnetic stresses in the perpendicular direction. Within this theory, simple examples of applications are presented to demonstrate the kind of solutions resulting from the model. The results show how the effects of charge separation and shear in the magnetic field and the velocity can be combined to form self-consistent structures such as are found to exist above the aurora, suggested also in association with solar flares.

Hesse, Michael↗

Magnetic suspension and balance systems (MSBSs)

The problems of wind tunnel testing are outlined, with attention given to the problems caused by mechanical support systems, such as support interference, dynamic-testing restrictions, and low productivity. The basic principles of magnetic suspension are highlighted, along with the history of magnetic suspension and balance systems. Roll control, size limitations, high angle of attack, reliability, position sensing, and calibration are discussed among the problems and limitations of the existing magnetic suspension and balance systems. Examples of the existing systems are presented, and design studies for future systems are outlined. Problems specific to large-scale magnetic suspension and balance systems, such as high model loads, requirements for high-power electromagnets, high-capacity power supplies, highly sophisticated control systems and position sensors, and high costs are assessed.

Britcher, Colin P.↗

Magnetic petrology of eastern North America diabases. I - Olivine-normative dikes from western South Carolina

The oxide mineralogy and the magnetic behavior of 15 olivine-normative samples obtained from South-Caroline diabase dikes were investigated using electron microprobe and SEM analyses and measurements of natural remanence magnetization (NRM), saturation isothermal remanence magnetization (SIRM), and anhysteritic remanence magnetization. It was found that chromite (which for these olivine-normative diabases is a sensitive petrologic indicator) constitutes up to 0.5 vol pct and that its abundance and composition correlate with bulk rock Cr. Microscopic analyses showed that titanomagnetite compositions were mostly between 0.4 and 0.55. The values of NRM and the NRM/SIRM ratios varied between 4 and 0.01 A sq m/kg and 0.0019 and 0.032, respectively. These properties inversely correlate with Cr content and demonstrably contrast Cr-rich and Cr-poor samples.

Warner, Richard D.↗

The significance of vector magnetic field measurements

Observations of four flaring solar active regions, obtained during 1980-1986 with the NASA Marshall vector magnetograph (Hagyard et al., 1982 and 1985), are presented graphically and characterized in detail, with reference to nearly simultaneous Big Bear Solar Observatory and USAF ASW H-alpha images. It is shown that the flares occurred where local photospheric magnetic fields differed most from the potential field, with initial brightening on either side of a magnetic-neutral line near the point of maximum angular shear (rather than that of maximum magnetic-field strength, typically 1 kG or greater). Particular emphasis is placed on the fact that these significant nonpotential features were detected only by measuring all three components of the vector magnetic field.

Hagyard, M. J.↗

Heating of the corona by magnetic singularities

Theoretical models of current-sheet formation and magnetic heating in the solar corona are examined analytically. The role of photospheric connectivity in determining the topology of the coronal magnetic field and its equilibrium properties is explored; nonequilibrium models of current-sheet formation (assuming an initially well connected field) are described; and particular attention is given to models with discontinuous connectivity, where magnetic singularities arise from smooth footpoint motions. It is shown that current sheets arise from connectivities in which the photospheric flux structure is complex, with three or more polarity regions and a magnetic null point within the corona.

Antiochos, Spiro K.↗

The outer magnetic field

The magnetic field of the sun extends outward through the photosphere into the corona. The resulting coronal and interplanetary magnetic fields therefore respond to and evolve with the solar cycle, as well as on shorter and longer time scales. These fields are modeled using photospheric magnetic field observations under the assumption that the coronal field is current free, becomes radial at a 'source surface' placed at 2.5 solar radii from the center of the sun, and is passively advected by the solar wind beyond the source surface. This review covers the computation of such models and their applications to characterize the morphology, evolution, and rotation of coronal and interplanetary magnetic fields using data collected between 1976 and the present at the Wilcox Solar Observatory.

Hoeksema, J. T.↗

Transverse conductivity of a relativistic plasma in oblique electric and magnetic fields

Resistive tearing in a primary candidate for flares occurring in stressed magnetic fields. Its possible application to the strongly magnetized environments (Hz about 10 to the 12th G) near the surface of neutron stars, particularly as a mechanism for generating the plasma heating and particle acceleration leading to gamma-ray bursts, has motivated a quantum treatment of this process, which requires knowledge of the electrical conductivity sigma of a relativistic gas in a new domain (i.e., that of a low-density n/e/) plasma in oblique electric and magnetic fields. This paper discusses the mathematical formalism for calculating sigma and present numerical results for a wide range of parameter values. The results indicate that sigma depends very strongly on both the applied electric and magnetic fields.

Melia, Fulvio↗

dc modulation noise in thin film magnetic recording disk media

A study of dc modulation noise as a function of magnetic layer thickness has been conducted for plated longitudinal low-noise Co-alloy disk media with a range of 900 to 1100 Oe. The noise, produced by the application of a reverse longitudinal dc field to a uniformly magnetized disk, supplies data regarding the uniformity of the disk. A spectrum analyzer measures the noise by means of electronic detection, and noise spectra and autocorrelation functions calculated with a model are compared to the experimental results. The model correlates with experimental data to more than 0.99. The maximum distance between effective transitions diminishes from 2.8 microns to 1 micron when the thickness of the magnetic layer is increased from 25 nm to 60 nm. The maximum average transition amplitude is found to be independent of thickness, and is bounded by 0.001 of the saturation magnetization.

Katti, R. R.↗

The interaction of a very large interplanetary magnetic cloud with the magnetosphere and with cosmic rays

The observation of one of the largest magnetic clouds ever observed at a distance of 1 AU, with a diameter of greater than about 0.4 AU, is reported. The cloud is shown to be almost unchanged structurally by interaction with the earth bow shock. The first observations are reported of an auroral activity response to the passage of a magnetic cloud, with a nearly immediate increase in auroral activity when the IMF theta(B) angle reversed polarity to negative near the cloud center. The results provide strong evidence that turbulent magnetic fields behind interplanetary shocks are a possible cause of Forbush decreases, but contest the idea that relatively smooth, strong fields in clouds are a cause of such decreases. The cloud field modeling supports the existence of magnetic force-free fields in describing cloud structure.

Lepping, R. P.↗

Expansion of a superbubble in a uniform magnetic field

The effects of interstellar magnetic fields on the evolution and structure of superbubbles are investigated. First, the governing equations for propagation of a radiative shock are derived and solved analytically in the limit of high expansion velocity. A numerical code able to solve them in the general case and discuss the numerical results is then presented. It is found that magnetic fields of the strength present in the Galactic disk do not significantly modify the overall shape and dimensions of a superbubble. They reduce the volume of the interior cavity by one-third on average during the expansion phase. The shell elongates slightly in the direction of the external field. Magnetic pressure dominates over gas pressure in most of the shell and forces it to thicken substantially. Finally, because of the transverse mass motions which take place from the magnetic poles to the equator, the column density at the poles is reduced by typically a factor of 10.

Ferriere, Katia M.↗

Inverse photoelectron spectrometer with magnetically focused electron gun

An inverse photoelectron spectrometer is described which is based on the design of a magnetically focused low energy electron gun. The magnetic lens extends its field over a relatively large segment of the electron trajectory, which could provide a better focusing effect on a high-current-density low-velocity electron beam, providing the magnetic field in the vicinity of the target is reduced sufficiently to preserve the collinearity of the beam. In order to prove the concept, ray tracing is conducted using the Herrmannsfeldt program for solving electron trajectories in electrostatic and magnetostatic focusing systems. The program allows the calculation of the angles of the electron trajectories with the z axis, at the target location. The results of the ray-tracing procedure conducted for this gun are discussed. Some of the advantages of the magnetic focusing are also discussed.

Krainsky, Isay L.↗