Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Magnetoelectric coupling at metal surfaces

Magnetoelectric coupling allows the magnetic state of a material to be changed by an applied electric field. To date, this phenomenon has mainly been observed in insulating materials such as complex multiferroic oxides. Bulk metallic systems do not exhibit magnetoelectric coupling, because applied electric fields are screened by conduction electrons. We demonstrate strong magnetoelectric coupling at the surface of thin iron films using the electric field from a scanning tunnelling microscope, and are able to write, store and read information to areas with sides of a few nanometres. Our work demonstrates that high-density, non-volatile information storage is possible in metals.

36 MATERIALS SCIENCE↗

Surface currents on ideal plasmas

The surface (or 'skin') current that can flow at a perturbed interface between plasma and vacuum is considered in the approximation where a surface marks a sharp transition from plasma to vacuum. A short magnetohydrodynamic calculation gives an exact and general expression for the component perpendicular to the average of the magnetic field either side of the surface, finding it proportional to the edge plasma pressure. A consequence is that for all plasmas with zero surface current at equilibrium, the surface current associated with any linear instability will flow parallel to the magnetic field. The surface current is calculated for a simple but realistic model of a cylindrical plasma, and found to depend on the type of instability, and consequently on the particular plasma equilibrium. This is illustrated for two well known cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Error field measurement, correction and heat flux balancing on Wendelstein 7-X

The measurement and correction of error fields in Wendelstein 7-X (W7-X) is critical to long pulse high beta operation, as small error fields may cause overloading of divertor plates in some configurations. Accordingly, as part of a broad collaborative effort, the detection and correction of error fields on the W7-X experiment has been performed using the trim coil system in conjunction with the flux surface mapping diagnostic and high resolution infrared camera. In the early commissioning phase of the experiment, the trim coils were used to open an n/m = 1/2 island chain in a specially designed magnetic configuration. The flux surfacing mapping diagnostic was then able to directly image the magnetic topology of the experiment, allowing the inference of a small similar to 4 cm intrinsic island chain. The suspected main sources of the error field, slight misalignment and deformations of the superconducting coils, are then confirmed through experimental modeling using the detailed measurements of the coil positions. Observations of the limiters temperatures in module 5 shows a clear dependence of the limiter heat flux pattern as the perturbing fields are rotated. Plasma experiments without applied correcting fields show a significant asymmetry in neutral pressure (centered in module 4) and light emission (visible, H-alpha, CII, and CIII). Such pressure asymmetry is associated with plasma-wall (limiter) interaction asymmetries between the modules. Application of trim coil fields with n = 1 waveform correct the imbalance. Confirmation of the error fields allows the assessment of magnetic fields which resonate with the n/m = 5/5 island chain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

LDRD-LW Final Report: 07-LW-041 "Magnetism in Semiconductor Nanocrystals: New Physics at the Nanoscale"

The work conducted in this project was conducted with the aim of identifying and understanding the origin and mechanisms of magnetic behavior in undoped semiconductor nanocrystals (NCs), specifically those composed of CdSe. It was anticipated that the successful completion of this task would have the effect of addressing and resolving significant controversy over this topic in the literature. Meanwhile, application of the resultant knowledge was expected to permit manipulation of the magnetic properties, particularly the strength of any magnetic effects, which is of potential relevance in a range of advanced technologies. More specifically, the project was designed and research conducted with the goal of addressing the following series of questions: (1) How does the magnitude of the magnetism in CdSe NCs change with the organic molecules used to passivate their surface the NC size? i.e. Is the magnetism an intrinsic effect in the nanocrystalline CdSe (as observed for Au NCs) or a surface termination driven effect? (2) What is the chemical (elemental) nature of the magnetism? i.e. Are the magnetic effects associated with the Cd atoms or the Se atoms or both? (3) What is/are the underlying mechanism(s)? (4) How can the magnetism be controlled for further applications? To achieve this goal, several experimental/technical milestones were identified to be fulfilled during the course of the research: (A) The preparation of well characterized CdSe NCs with varying surface termination (B) Establishing the extent of the magnetism of these NCs using magnetometry (particularly using superconducting interference device [SQUID]) (C) Establishing the chemical nature of the magnetism using x-ray magnetic circular dichroism (XMCD) - the element specific nature of the technique allows identification of the element responsible for the magnetism (D) Identification of the effect of surface termination on the empty densities of states (DOS) using x-ray absorption spectroscopy (XAS), with particular emphasis on elucidating small changes in the d-electron count. Characterizing changes in the d-electron density can yield important insight into the mechanisms of magnetism in materials. As the three attached manuscripts illustrate (presented in preprint form to ensure no infringement of copyright), each of these milestones was successfully illustrated and the results published in the scientific literature during the course of the project. The research team members were able to determine, from a series of XAS, XMCD and SQUID magnetometry measurements, that CdSe NCs are paramagnetic and that the magnitude of magnetic susceptibility is dependent upon the type of organic molecule used to passivate the NC surface (i.e. the observed magnetism results, at least in part, from a surface effect that is not intrinsic to the NCs). In addition, they identified that the mechanism by which the magnetic susceptibility is modified - via {pi} back-donation of d-electrons to the organic ligands from the Cd atoms. These findings demonstrate that the magnetic properties are related to the surface Cd atoms and illustrate the means by which the magnetic behavior can be manipulated for specific technological applications. Two of the papers published during the course of the LW project do not contain magnetometry data, but focus on the evolution in electronic structure of the CdSe NCs as a function of particle size. These measurements were crucial in developing an understanding of the electronic behavior of the NCs and, ultimately, in assigning the p back-donation mechanism for inducing controllable paramagnetic behavior. Significantly, the research team has also filed a patent application based upon their research: 'Method for Creating Ligand Induced Paramagnetism in Nanocrystalline Structures' Docket: IL-11858. It is noted that both LDRD-LW and Office of Basic Energy Sciences (OBES) funding is acknowledged in the attached manuscripts. As such, is important to indicate that funds were not comingled during the course of the project. Some of the experimental data presented in the manuscripts was collected prior to the LDRD-LW award by Dr. Meulenberg and Dr. Lee, who were supported by an OBES award at the time. This data was, in part, used by Dr. Meulenberg in his proposal/presentation for the LDRD-LW competition. Moreover, the vast majority of data presented in the three papers was collected at OBES-funded synchrotron facilities which necessitated an acknowledgement to OBES.

36 MATERIALS SCIENCE↗

Noncollinear magnetic configurations and substrate-mediated interactions in Mn trimers on the GaN (000$\bar{1}$) surface

Collinear and noncollinear calculations based on density functional theory are carried out to elucidate the magnetic ordering of Mn trimers on a GaN ($000\bar{1}$) substrate. These trimers had previously been observed in $3a \times 3a$ surface reconstructions through Mn deposition onto the N-polar face of wurtzite GaN($000\bar{1}$). In this work, we start off by studying the effect of spin orbit coupling for the case of monomers and dimers of Mn atoms on top of a GaN surface. Based on an effective spin Hamiltonian, we estimate the magnetic anisotropy energy (MAE) for those cases and found that it is four orders of magnitude weaker than the exchange magnetic coupling between Mn adatoms. In the Mn trimer case, the magnetic ground state has the Mn spins in-plane with the GaN surface in which the relative spin orientation within each trimer is noncollinear due to the competition between the two antiferromagnetic interactions that affect each Mn spin in the trimer, which leads to the found energy minimum with 120 degree angles between the spins. By exploring the nature and fundamental mechanisms for the magnetic interaction among the Mn trimers, we find that the surface states of the substrate play a key role, involving a Ruderman-Kittel-Kasuya-Yosida (RKKY)-type interaction. We report on an electron-mediated long-distance exchange coupling between localized magnetic moments on a GaN($000\bar{1}$) surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of wear on structure-sensitive magnetic properties of ceramic ferrite in contact with magnetic tape

Wear experiments and electron microscopy and diffraction studies were conducted to examine the wear and deformed layers in single-crystal Mn-Zn (ceramic) ferrite magnetic head material in contact with magnetic tape and the effects of that contact on magnetic properties. The crystalline state of the single-crystal magnetic head was changed drastically during the sliding process. A nearly amorphous structure was produced on its wear surface. Deformation in the surficial layer of the magnetic head was a critical factor in readback signal loss above 2.5 dB. The signal output level was reduced as applied normal load was increased. Considerable plastic flow occurred on the magnetic tape surface with sliding, and the signal loss due to the tape wear was approximately 1 dB.

Miyoshi, K.↗

Analytical expression of a finite, long, conical canted-cosine-theta coil for particle collider interaction regions

Magnets in the accelerator interaction region (IR) present significant challenges because of high field requirements and limited available space. Conical-shaped magnets offer advantages in these environments by allowing closer placement to the interaction point while maintaining clearance from synchrotron radiation. Interestingly, numerical studies have shown that conical canted-cosine-theta (CCT) designs produce a constant field distribution along the axial direction in the IR quadrupoles for the Electron-Ion Collider (EIC) at Brookhaven National Laboratory. However, the field harmonics generated by conical CCT windings are not yet fully understood. This paper presents an analytical approach to describe the magnetic field produced by a conical surface current and proposes a method for designing conical CCT magnets for accelerator applications. First, we begin with a surface current sheet having a general cosine-theta distribution in spherical coordinates and solve the vector potential using the Green’s function. The magnetic fields generated by the conical current sheet are expressed using associated Legendre polynomials. These results are then related to circular field harmonics and integral field harmonics for designing a coil that produces a pure multipole field. Next, a single layer of the conical CCT winding path is produced based on the cosine-theta current distribution. Finally, the magnetic field quality of dipole and quadrupole conical CCT coils with multiple layers is verified using the Biot-Savart law.

Yang, Ye↗

On radial geodesic forcing of zonal modes

The elementary local and global influence of geodesic field line curvature on radial dispersion of zonal modes in magnetised plasmas is analysed with a primitive drift wave turbulence model. A net radial geodesic forcing of zonal flows and geodesic acoustic modes can not be expected in any closed toroidal magnetic confinement configuration, since the flux surface average of geodesic curvature identically vanishes. Radial motion of poloidally elongated zonal jets may occur in the presence of geodesic acoustic mode activity. Phenomenologically a radial propagation of zonal modes shows some characteristics of a classical analogon to second sound in quantum condensates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Excitation of surface plasma waves by a density-modulated electron beam in a magnetized plasma cylinder

A density-modulated electron beam propagating through a plasma cylinder excites surface plasma waves (SPWs) via Cerenkov and fast cyclotron interaction. A nonlocal theory of this process has been developed. Numerical calculations of the growth rate and unstable mode frequencies have been carried out for the typical parameters of the SPWs. The growth rate {gamma} (in rad/s) of the unstable wave instability increases with the modulation index {Delta} and has the largest value for {Delta}{approx}1 in addition to when the frequency and wave number of the modulation are comparable to that of the unstable wave. For {Delta}=0, {gamma} turns out to be {approx}6.06x10{sup 9} rad/s for Cerenkov interaction and {approx}5.47x10{sup 9} rad/s for fast cyclotron interaction. The growth rate of the instability increases with the beam density and scales as one-third power of the beam density in Cerenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. The real part of the frequency of the unstable wave increases as almost the square root of the beam voltage. The results of the theory are applied to explain some of the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetization reversal and local switching fields of ferromagnetic Co/Pd microtubes with radial magnetization

Three-dimensional nanomagnetism is a rapidly growing field of research covering both noncollinear spin textures and curved magnetic geometries including microtubular structures. Here, we spatially resolve the field-induced magnetization reversal of free-standing ferromagnetic microtubes utilizing multifrequency magnetic force microscopy (MFM). The microtubes are composed of Co/Pd multilayer films with perpendicular magnetic anisotropy that translates to an anisotropy with radial easy axis upon rolling-up. Simultaneously mapping the topography and the perpendicular magnetostatic force derivative, the relation between surface angle and local magnetization configuration is evaluated for a large number of locations with slopes exceeding 45 degrees. The angle-dependence of the switching field is concurrent with the Kondorsky model, i.e., the rolled-up nanomembrane behaves like a planar magnetic film with perpendicular anisotropy and a pinning dominated magnetization reversal. Additionally, we discuss methodological challenges when detecting magnetostatic force derivatives near steep surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimizing Magnetic Force Microscopy Resolution and Sensitivity to Visualize Nanoscale Magnetic Domains

Magnetic force microscopy (MFM) enables mapping local magnetic fields across a sample surface with nanoscale resolution. To perform MFM, an atomic force microscopy (AFM) probe whose tip has been magnetized vertically (i.e., perpendicular to the probe cantilever) is oscillated at a fixed height above the sample surface. The resultant shifts in the oscillation phase or frequency, which are proportional to the magnitude and sign of the vertical magnetic force gradient at each pixel location, are then tracked and mapped. Although the spatial resolution and sensitivity of the technique increases with decreasing lift height above the surface, this seemingly straightforward path to improved MFM images is complicated by considerations such as minimizing topographical artifacts due to shorter range van der Waals forces, increasing the oscillation amplitude to further improve sensitivity, and the presence of surface contaminants (in particular water due to humidity under ambient conditions). In addition, due to the orientation of the probe's magnetic dipole moment, MFM is intrinsically more sensitive to samples with an out-of-plane magnetization vector. Here, high-resolution topographical and magnetic phase images of single and bicomponent nanomagnet artificial spin-ice (ASI) arrays obtained in an inert (argon) atmosphere glovebox with <0.1 ppm O 2 and H 2 O are reported. Further, optimization of lift height and drive amplitude for high resolution and sensitivity while simultaneously avoiding the introduction of topographical artifacts is discussed, and detection of the stray magnetic fields emanating from either end of the nanoscale bar magnets (~250 nm long and <100 nm wide) aligned in the plane of the ASI sample surface is shown. Likewise, using the example of a Ni-Mn-Ga magnetic shape memory alloy (MSMA), MFM is demonstrated in an inert atmosphere with magnetic phase sensitivity capable of resolving a series of adjacent magnetic domains each ~200 nm wide.

47 OTHER INSTRUMENTATION↗

BABCOCK–LEIGHTON SOLAR DYNAMO: THE ROLE OF DOWNWARD PUMPING AND THE EQUATORWARD PROPAGATION OF ACTIVITY

The key elements of the Babcock–Leighton dynamos are the generation of poloidal field through decay and the dispersal of tilted bipolar active regions and the generation of toroidal field through the observed differential rotation. These models are traditionally known as flux transport dynamo models as the equatorward propagations of the butterfly wings in these models are produced due to an equatorward flow at the bottom of the convection zone. Here we investigate the role of downward magnetic pumping near the surface using a kinematic Babcock–Leighton model. We find that the pumping causes the poloidal field to become predominately radial in the near-surface shear layer, which allows the negative radial shear to effectively act on the radial field to produce a toroidal field. We observe a clear equatorward migration of the toroidal field at low latitudes as a consequence of the dynamo wave even when there is no meridional flow in the deep convection zone. Both the dynamo wave and the flux transport type solutions are thus able to reproduce some of the observed features of the solar cycle including the 11-year periodicity. The main difference between the two types of solutions is the strength of the Babcock–Leighton source required to produce the dynamo action. A second consequence of the magnetic pumping is that it suppresses the diffusion of fields through the surface, which helps to allow an 11-year cycle at (moderately) larger values of magnetic diffusivity than have previously been used.

79 ASTRONOMY AND ASTROPHYSICS↗

Physics of forced magnetic reconnection in coaxial helicity injection experiments in National Spherical Torus Experiment

We numerically examine the physics of fast flux closure in transient coaxial helicity injection (CHI) experiments in National Spherical Torus Experiment (NSTX). By performing resistive Magnetohydrodynamics (MHD) simulations with poloidal injector coil currents held constant in time, we find that closed flux surfaces are formed through forced magnetic reconnection. Through a local Sweet-Parker type reconnection with an elongated current sheet in the injector region, closed flux surfaces expand in the NSTX global domain. Simulations demonstrate outflows approaching poloidally Alfvénic flows and reconnection times consistent with the Sweet-Parker model. Critical requirements for magnetic reconnection and flux closure are studied in detail. These primary effects, which are magnetic diffusivity, injector flux, injector flux footprint width, and rate of injector voltage reduction, are simulated for transient CHI experiments. The relevant time scales for effective reconnection are τ{sub V}<τ{sub rec}≈τ{sub A}√(S)(1+Pm){sup 1/4}<τ{sub R}, where τ{sub V} is the time for the injector voltage reduction, τ{sub A} is the poloidal Alfvén transit time, τ{sub R} is the global resistive diffusion time, and Pm and S are Prandtl and Lundquist numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Absolute magnetic helicity and the cylindrical magnetic field

The different magnetic helicities conserved under conditions of perfect electrical conductivity are expressions of the fundamental property that every evolving fluid surface conserves its net magnetic flux. This basic hydromagnetic point unifies the well known Eulerian helicities with the Lagrangian helicity defined by the conserved fluxes frozen into a prescribed set of disjoint toroidal tubes of fluid flowing as a permanent partition of the entire fluid [B. C. Low, Astrophys. J. 649, 1064 (2006)]. This unifying theory is constructed from first principles, beginning with an analysis of the Eulerian and Lagrangian descriptions of fluids, separating the ideas of fluid and magnetic-flux tubes and removing the complication of the magnetic vector potential's free gauge from the concept of helicity. The analysis prepares for the construction of a conserved Eulerian helicity, without that gauge complication, to describe a 3D anchored flux in an upright cylindrical domain, this helicity called absolute to distinguish it from the well known relative helicity. In a version of the Chandrasekhar-Kendall representation, the evolving field at any instant is a unique superposition of a writhed, untwisted axial flux with a circulating flux of field lines all closed and unlinked within the cylindrical domain. The absolute helicity is then a flux-weighted sum of the writhe of that axial flux and its mutual linkage with the circulating flux. The absolute helicity is also conserved if the frozen-in field and its domain are continuously deformed by changing the separation between the rigid cylinder-ends with no change of cylinder radius. This hitherto intractable cylindrical construction closes a crucial conceptual gap for the fundamentals to be complete at last. The concluding discussion shows the impact of this development on our understanding of helicity, covering (i) the helicities of wholly contained and anchored fields; (ii) the Eulerian and Lagrangian descriptions of field evolution; (iii) twist as a topological property of solenoidal fields versus the linkage properties of open and closed discrete curves treated by Gauss, Caligarneau, Berger, and Prior; and (iv) the change of absolute helicity by resistive diffusion. These are important hydromagnetic properties of twisted magnetic fields in the million-degree hot, highly conducting corona of the Sun.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The generation of magnetic fields in astrophysical bodies. X - Magnetic buoyancy and the solar dynamo

The magnetic field appearing as bipolar magnetic regions at the surface of the sun represents the lines of force from a general azimuthal field of the order of 100 gauss somewhere beneath the surface. The amplification time, as a consequence of the nonuniform rotation, is of the order of 10 years. But magnetic buoyancy brings the azimuthal field up through much of the convective zone in a time rather less than 10 years, raising the question of where the azimuthal field can be retained long enough to be amplified. We show that magnetic fields can be retained for long periods of time in the stable radiative region beneath the convective zone, but unfortunately the solar dynamo cannot function there because turbulent diffusion is an essential part of its operation. The only possible conclusion appears to be that the dynamo operates principally in the very lowest levels of the convective zone at depths of 150,000 km or more, where the gas density is 0.1 g/cu cm, and the fields are limited to 50 gauss.

Parker, E. N.↗

On the reversal of the dipolar field of the sun and its possible implication for the reversal of the earth's field

Changes of the neutral line on the source surface (analogous to the magnetic dip equator of the earth) during the period between 1976 and 1983 are examined on the basis of the Stanford solar magnetic field data. Instead of the standard Mercator-like projection, the neutral line is shown on a spherical surface for 16 selected Carrington rotations. In spite of great complexity of the field variations, this presentation depicts clearly a fairly systematic rotational reversal of the dipolar field on the source surface during the sunspot maximum years. It is suggested that this solar situation is somewhat analogous to the planet earth in the sense that the core surface and the earth's surface may correspond to the photosphere and the source surface, respectively.

Saito, T.↗

Self-suppression of double tearing modes via Alfven resonance in rotating tokamak plasmas

Reversed magnetic shear configuration, a key method for improving plasma confinement in advanced tokamaks, is prone to exciting double tearing modes (DTMs) that can severely degrade the plasma confinement. In this letter, we reveal a new mechanism of suppressing the DTM instability due to the self-induced Alfven resonance in rotating tokamak plasmas. The linear growth rate is reduced from {approx}S{sub Hp}{sup -1/3} of the fast DTM regime to {approx}S{sub Hp}{sup -3/5} of the slow single tearing mode regime, where S{sub Hp} is magnetic Reynolds number. Instead of generating magnetic islands at the inner rational surface that can greatly enhance plasma transport in the core region, the formation of current sheets at resonance layers not only prevents the fast nonlinear DTM reconnection phase but also contributes to plasma heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗