Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lead”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Neutron production in collisions between carbon nuclei of energy 2 GeV per nucleon and carbon, aluminum, copper, cadmium, and lead nuclei

Double-differential cross sections for neutron production were measured by the time-of-flight method for the interactions between carbon nuclei of energy 2 GeV per nucleon and carbon, aluminum, copper, cadmium, and lead nuclei. These measurements were performed for angles of 30 Degree-Sign , 53 Degree-Sign , and 90 Degree-Sign in the neutron-energy range fromseveral hundred keVunits to 300MeV. The phenomenologicalmodel of four moving sources was used as a basis in analyzing experimental results and in estimating the contribution to neutron emission from various reaction stages. The temperature parameters determined from the slope of the neutron energy spectra proved to be 22 {+-} 2 MeV for a hot source (fireball) and 4.5 {+-} 0.3 MeV for the stage of thermal fragmentation of highly excited heavy nuclear residues. The relative contribution of these two sources to the total neutron yield is independent of the type of the target nucleus and is about 42%, on average.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Coherent fragmentation of {sup 12}C nuclei of momentum 4.5 GeV/c per nucleon through the {sup 8}Be{sub g.s.}+{sup 4}He channel in a nuclear photoemulsion containing lead nuclei

A two-particle channel in which an unbound nucleus of {sup 8}Be in the ground state ({sup 8}Be{sub g.s.}) was one of the fragments was selected among events where {sup 12}C nuclei of momentum 4.5 GeV/c per nucleon undergo coherent dissociation into three alpha particles. The events in question were detected in a track nuclear photoemulsion containing lead nuclei, which was irradiated at the synchrophasotron of the Laboratory of High Energies at the Joint Institute for Nuclear Research (JINR, Dubna). The average transverse momentum of alpha particles produced upon the decay of {sup 8}Be{sub g.s.} nuclei was 87±6 MeV/c, while that for “single” alpha (α{sub s}) particles was 123±15 MeV/c. The average value of the transverse-momentum transfer in the reaction being considered, Pt(12C), was 223 ± 20 MeV/c. The average value of the cross section for this channel involving Ag and Br target nuclei was 13 ± 4 mb, while the cross section for the reaction on the Pb nucleus was 40 ± 15 mb. The Coulomb dissociation contribution evaluated on the basis of the number of events where the momentum P{sub t}({sup 12}C) did not exceed 0.1 GeV/c saturated about 20%. In nine events, the measured total transverse energy of the fragments in the reference frame comoving with the decaying carbon nucleus did not exceed 0.45 MeV, which did not contradict the excitation of the participant {sup 12}C nucleus to the level at 7.65 MeV. The average value of the transverse momentum in those events was 234 ± 25 MeV/c.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation and calculation of the piezoelectric modulus of a lead zirconate-titanate thin film in a test microstructure

Results of simulation of stresses in the test structure of a silicon beam and analytical calculation of piezoelectric modulus d{sub 31} of a lead zirconate-titanate (PZT) thin film arranged in the region of an elastic element are presented. The characteristics of the sensitive element of acceleration are calculated based on a PZT thin film with an inertial mass made of silicon.

36 MATERIALS SCIENCE↗

Optical properties of nanostructured lead sulfide films with a D0{sub 3} cubic structure

The optical transmittance of nanostructured cubic PbS (lead sulfide) films with a D0{sub 3} structure is measured in the wavelength range 300 to 3200 nm. The film thicknesses are in the range {approx}120 to {approx}400 nm. Electron microscopy of the microstructure shows that about half of the films' particles are 60 nm or smaller in size. As the average particle size is decreased, the band gap E{sub g} increases from 0.85 to 1.5 eV, being noticeably larger than the band gap of coarse-grained PbS, 0.41 eV. This is indicative of a blue shift of the optical absorption band in nanostructured PbS films.

36 MATERIALS SCIENCE↗

Study of the self-organization processes in lead sulfide quantum dots

A procedure is described for the synthesis of nanoparticles based on lead chalcogenides. The procedure combines the synthesis of colloidal quantum dots (QDs) in aqueous solutions with simultaneous organization of the QDs into ordered arrays. The processes of the self-organization of QDs are analyzed at the nano- and microscopic levels by the photoluminescence method, atomic-force microscopy, and optical microscopy.

36 MATERIALS SCIENCE↗

Effect of the Sintering Temperature on the Formation of Ferroelectric Properties of a Lead Zirconate–Titanate Ceramic

Effect of the sintering temperature on the formation of the microstructure, the domain structure, and the ferroelectric properties of a lead zirconate–titanate Pb(Ti{sub x}Zr{sub 1–} {sub x})O{sub 3} piezoelectric ceramics has been studied. It is shown that the ferroelectric phase forms at a sintering temperature of 860°C. At higher sintering temperatures, the main effect on the properties is due to a unit cell deformation and free charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrocaloric Effect in a Lead Magnoniobate–Scandoniobate Relaxor

The electrocaloric effect and also the dielectric, pyroelectric, acoustic, and piezoelectric properties of a lead magnoniobate–scandoniobate solid solution in a biasing electric field have been studied. The dielectric and electromechanical contributions to the pyroelectric and electrocaloric effects are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Peculiarities of the Intermediate Phase in Zr-Rich Lead Zirconate Titanate

This paper presents the results of X-ray diffraction studies on a single crystal of lead zirconate titanate PbZr{sub 0.993}Ti{sub 0.007}O{sub 3} in the region of existence of an intermediate ferroelectric phase. In addition to the known superstructure reflections of the M type q{sub M} = {(1/2),(1/2),0} and the first-order satellite reflections q{sub M} + {δ, δ, δ}, unknown second-order satellites have been observed near q{sub M} and near the Bragg reflections. Structural model of regular system of antiphase domains is used for diffraction calculation. The model is shown to describe the first- and second-orders satellite reflections in the vicinity of q{sub M}, but it cannot explain the appearance of satellites around the main Bragg peaks. A possible origin of the system of the superstructures observed in the intermediate phase is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Peculiarities of Electron Transport and Photoconductivity in a Layer of Lead Sulfide Nanoparticles

The main laws of electron transport in layers of lead sulfide (PbS) nanoparticles deposited from aqueous ethanol suspensions were determined by analysis of their current–voltage characteristics. Optical spectra measured at wavelengths in the region of 3500 nm showed that these layers contain almost no any organic components. The photocurrent in deposited PbS nanopowders exhibits variation under the exposure to broadband radiation corresponding to “transparency window” of the atmosphere (8000–14 000 nm), in which the absorption on free charge carriers can take place.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on hydrogen isotopes permeation in fluidized state of liquid lithium-lead

Lithium-lead (Li-Pb) is one of the most promising candidate materials for the liquid blanket of fusion reactors. Hydrogen transfer under a fluidized condition of Li-Pb is investigated experimentally to design a Li-Pb blanket system. Li-Pb eutectic alloy flows inside a Ni tube in the experimental system, where H{sub 2} permeates into and out of the forced Li-Pb flow. The overall H{sub 2} permeation rate is analyzed using a mass balance model. Hydrogen atoms diffuse in Ni and Li-Pb. The steady-state H{sub 2} permeation rate obtained by this experiment is smaller than the result of the calculation model. A resistance factor is introduced to the present analysis in order to evaluate the influence of other H{sub 2} transfer mechanisms, such as diffusion in Li-Pb and dissolution reaction between Ni and Li-Pb. The contribution of the resistance to the overall H{sub 2} permeation rate becomes large when the flow rate of Li-Pb is low. This is because the boundary layer thickness between Ni and Li-Pb affects the overall H{sub 2} permeation rate. When the flow velocity of Li-Pb increases, the thickness of the boundary layer becomes thin, and the driving force of H{sub 2} permeation through the Ni wall becomes bigger. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-destructive Assay Measurements Using the RPI Lead Slowing Down Spectrometer

The use of a Lead Slowing-Down Spectrometer (LSDS) is consid- ered as a possible option for non-destructive assay of fissile material of used nuclear fuel. The primary objective is to quantify the 239Pu and 235U fissile content via a direct measurement, distinguishing them through their characteristic fission spectra in the LSDS. In this pa- per, we present several assay measurements performed at the Rensse- laer Polytechnic Institute (RPI) to demonstrate the feasibility of such a method and to provide benchmark experiments for Monte Carlo cal- culations of the assay system. A fresh UOX fuel rod from the RPI Criticality Research Facility, a 239PuBe source and several highly en- riched 235U discs were assayed in the LSDS. The characteristic fission spectra were measured with 238U and 232Th threshold fission cham- bers, which are only sensitive to fission neutron with energy above the threshold. Despite the constant neutron and gamma background from the PuBe source and the intense interrogation neutron flux, the LSDS system was able to measure the characteristic 235U and 239Pu responses. All measurements were compared to Monte Carlo simula- tions. It was shown that the available simulation tools and models are well suited to simulate the assay, and that it is possible to calculate the absolute count rate in all investigated cases.

Lead Slowing Down Spectrometer↗

Demonstration of MOOSE-based Griffin reactor physics, code for heterogeneous lead-cooled fast reactor analysis

The MOOSE-based reactor physics code Griffin was assessed on a heterogeneous pin-resolved model of a prototype lead-cooled fast reactor assembly. This model was developed in preparation for future use in MOOSE-based multiphysics calculations for computing hot channel factors. Heterogeneous multigroup cross sections were prepared using the fast reactor multi-group cross section processing code MC{sup 2}-3 using a two-step method. Griffin simulations were performed using the DFEM-SN solver on 576 cores on Argonne's LCRC cluster. Diffusion-based acceleration methods were applied (NDA and CMFD). Reference solutions were generated with continuous energy MCNP and the hybrid MOC/finite element solver PROTEUS-MOC for code-to-code comparison. Space-angle convergence studies were conducted to observe convergence in k-eigenvalue and axial pin power distributions. The fully resolved Griffin calculation was within 68 pcm of the MCNP eigenvalue and exhibited max 1.2% relative error in the axial pin power distribution. Griffin produced nearly identical results to PROTEUS-MOC when using the same 9-group multigroup cross-section set. Griffin demonstrated favorable scaling in wall-clock time and memory usage when using diffusion-based acceleration methods. Griffin is capable of simulating the pin-resolved heterogeneous LFR assembly with good accuracy and performance, and is suitable for future use in coupled high-fidelity hot channel factor simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Genetic algorithm-based optimisation of the few-group structure for lead fast reactors analysis

The optimal choice of the few-group structure for full-core transient analyses is still an open issue in reactor physics, especially for fast system like the lead fast reactor. One possible approach to select the group boundaries is represented by heuristic search algorithms, such as evolutionary ones. In this paper, a genetic algorithm coupled with the SIMMER code is employed to determine optimized six-group boundaries for the analysis of the ALFRED reactor. The Serpent Monte Carlo code is adopted to produce both the fine-group cross section library and the fine-group flux, used as a figure of merit to drive the genetic optimisation. The results show that the algorithm is indeed able to find satisfactory solutions that comply with the set objectives and can be reasonably interpreted in light of the underlying physics of the considered core. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Trace Metal Inventories and Lead Isotopic Composition Chronicle a Forest Fire’s Remobilization of Industrial Contaminants Deposited in the Angeles National Forest

The amounts of labile trace metals: [Co] (3 to 11 mg g -1 ), [Cu] (15 to 69 mg g -1 ), [Ni] (6 to 15 mg g -1 ), [Pb] (7 to 42 mg g -1 ), and [Zn] (65 to 500 mg g -1 ) in ash collected from the 2012 Williams Fire in Los Angeles, California attest to the role of fires in remobilizing industrial metals deposited in forests. These remobilized trace metals may be dispersed by winds, increasing human exposures, and they may be deposited in water bodies, increasing exposures in aquatic ecosystems. Correlations between the concentrations of these trace metals, normalized to Fe, in ash from the fire suggest that Co, Cu, and Ni in most of those samples were predominantly from natural sources, whereas Pb and Zn were enriched in some ash samples. The predominantly anthropogenic source of excess Pb in the ash was further demonstrated by its isotopic ratios ( 208 Pb/ 207 Pb: 206 Pb/ 207 Pb) that fell between those of natural Pb and leaded gasoline sold in California during the previous century. These analyses substantiate current human and environmental health concerns with the pyrogenic remobilization of toxic metals, which are compounded by projections of increases in the intensity and frequency of wildfires associated with climate change.

59 BASIC BIOLOGICAL SCIENCES↗

Lead isotopic compositions of airborne particulates collected from snow and from dry deposition in the East River Watershed, Colorado and at the Southern Sierra Critical Zone Observatory, California

The data set consists of lead (Pb) isotopic ratios (206Pb/207Pb and 208Pb/207Pb, as well as 206Pb/204Pb, 207Pb/204Pb, 208Pb/204Pb) for particulate samples collected from snow and dry deposition. This was part of a study (O’Day et al. 2020) that was looking at the speciation of phosphorous in splits of these samples to evaluate the flux and bio-availability of phosphorous to the mountain sites in the study. The Pb isotopic data allow sourcing of long-range transported Pb, specifically the fraction of Pb sourced in Asia, and so a comparison of the relative distances of PM sources between the high and low elevation sites. Samples were collected at the East River Watershed, CO (dry deposition collected over Sept.-Oct. 2016, show sampling winter 2017) and at the Southern Sierra Critical Zone Observatory (dry deposition collected over Sept-Nov 2016, July-Sept 2017, June-July 2017). The data includes Pb concentration data, as well as calculated fraction of the Pb sourced in Asia. This data set was published in part in O’Day et al. (2020) Phosphorus Speciation in Atmospherically Deposited Particulate Matter and Implications for Terrestrial Ecosystem Productivity. ES&T, https://dx.doi.org/10.1021/acs.est.9b06150

54 ENVIRONMENTAL SCIENCES↗

Report on First Activations with the Lead Slowing Down Spectrometer

On Feb. 17 and 18 2011, six items were irradiated with neutrons using the Lead Slowing Down Spectrometer. After irradiation, dose measurements and gamma-spectrometry measurements were completed on all of the samples. No contamination was found on the samples, and all but one provided no dose. Gamma-spectroscopy measurements qualitatively agreed with expectations based on the materials, with the exception of silver. We observed activation in the room in general, mostly due to 56Mn and 24Na. Most of the activation was short lived, with half-lives on the scale of hours, except for 198Au which has a half-life of 2.7 d.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Lead Slowing-Down Spectrometry Time Spectral Analysis for Spent Fuel Assay: FY11 Status Report

Developing a method for the accurate, direct, and independent assay of the fissile isotopes in bulk materials (such as used fuel) from next-generation domestic nuclear fuel cycles is a goal of the Office of Nuclear Energy, Fuel Cycle R&D, Material Protection and Control Technology (MPACT) Campaign. To meet this goal, MPACT supports a multi-institutional collaboration, of which PNNL is a part, to study the feasibility of Lead Slowing Down Spectroscopy (LSDS). This technique is an active nondestructive assay method that has the potential to provide independent, direct measurement of Pu and U isotopic masses in used fuel with an uncertainty considerably lower than the approximately 10% typical of today's confirmatory assay methods. This document is a progress report for FY2011 PNNL analysis and algorithm development. Progress made by PNNL in FY2011 continues to indicate the promise of LSDS analysis and algorithms applied to used fuel. PNNL developed an empirical model based on calibration of the LSDS to responses generated from well-characterized used fuel. The empirical model, which accounts for self-shielding effects using empirical basis vectors calculated from the singular value decomposition (SVD) of a matrix containing the true self-shielding functions of the used fuel assembly models. The potential for the direct and independent assay of the sum of the masses of 239Pu and 241Pu to within approximately 3% over a wide used fuel parameter space was demonstrated. Also, in FY2011, PNNL continued to develop an analytical model. Such efforts included the addition of six more non-fissile absorbers in the analytical shielding function and the non-uniformity of the neutron flux across the LSDS assay chamber. A hybrid analytical-empirical approach was developed to determine the mass of total Pu (sum of the masses of 239Pu, 240Pu, and 241Pu), which is an important quantity in safeguards. Results using this hybrid method were of approximately the same accuracy as the pure empirical approach. In addition, total Pu with much better accuracy with the hybrid approach than the pure analytical approach. In FY2012, PNNL will continue efforts to optimize its empirical model and minimize its reliance on calibration data. In addition, PNNL will continue to develop an analytical model, considering effects such as neutron-scattering in the fuel and cladding, as well as neutrons streaming through gaps between fuel pins in the fuel assembly.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Lead Slowing Down Spectrometer Research Plans

The MPACT-funded Lead Slowing Down Spectrometry (LSDS) project has been evaluating the feasibility of using LSDS techniques to assay fissile isotopes in used nuclear fuel assemblies. The approach has the potential to provide considerable improvement in the assay of fissile isotopic masses in fuel assemblies compared to other non-destructive techniques in a direct and independent manner. The LSDS collaborations suggests that the next step to in empirically testing the feasibility is to conduct measurements on fresh fuel assemblies to understand investigate self-attenuation and fresh mixed-oxide (MOX) fuel rodlets so we may better understand extraction of masses for 235 U and 239 Pu. While progressing toward these goals, the collaboration also strongly suggests the continued development of enabling technology such as detector development and algorithm development, which could provide significant performance benefits.

Lead slowing down spectrometry↗