Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrodynamics experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Beneficiation of pulverized coal combustion fly ash in fluidised bed reactors

The paper addresses the thermal treatment of pulverized coal combustion fly ash belonging to the group C of Geldart powder classification in unconventional configurations of fluidised bed reactors. A sound-assisted fluidised bed combustor operated at 850 and 750 C, and a fluidised bed combustor characterized by a conical geometry, operated at 850 C, are the two lab-scale reactors tested. Combustion experiments have been carried out at different air excesses, ranging between 10% and 170%, and in the case of the conical fluidization column with different bed inventory. Both tested configurations have been proved to be efficient to reduce the carbon content initially present in the fly ash of 11%{sub w}, to a very low level, generally smaller than 1%{sub w}. Both the fly ash residence time in the reactor and the air excess strongly influenced the reactor performance. Residence times of 3-4 min and 10-60 min have been estimated for experiments carried out with the sound-assisted fluidised bed combustor and with the conical fluidised bed combustor, respectively. Regarding the possibility of a concurrent reduction of unburned carbon in the ash and of a particle size separation of the beneficiated material, on the basis of the obtained experimental data, the sound-assisted fluidised bed combustor is not able to separate the broad particle size distribution of the fly ash in different outlet solid streams. The use of a conical fluidised bed combustor is promising to realize an efficient separation of the inlet broad particle size distribution of the fly ash fed to the reactor into narrower outlet solid streams extracted from different locations: combustor exit, top and bottom of the bed. In this framework a hydrodynamic characterization of binary mixtures in a conical fluidised bed column carried out at ambient and high temperature (850 C) has demonstrated that the operating conditions of the conical fluidised bed combustor can be chosen on the basis of a compromise between the requirements of a complete fluidization of the bed material and a high level of segregation of the finer particles present in the bed. (author)

01 COAL, LIGNITE, AND PEAT↗

Fabrication and durability characterization of superhydrophobic and lubricant-infused surfaces

Hypothesis: Practical applications of non-wetting surfaces require good mechanical durability in the wet environments for which they are intended to be used. Durability of non-wetting surfaces is influenced by the surface features, interaction with the functionalization agent, and the lubricant properties that can be tuned independently to identify optimal combination. Experiments: In this study, superhydrophobic and lubricant-infused surfaces are fabricated on copper tubes using chemical etching and electrodeposition texturing techniques, six different functionalizing agents, and five different infused lubricants. Through 180 fabrication combinations and 102 durability tests, each parameter is systematically studied for contributions to initial non-wetting behavior and its durability in heated, wet environment, under high-energy water jet impingement, and under accelerated flow conditions. Findings: Among the adsorbing and curing functionalization agents investigated, n-Hexadecyl mercaptan that belongs to the sulfhydryl group and Sylgard-184, respectively, showed high durability in heated water immersion and under jet impingement tests. For lubricant-infused surfaces, lubricants with high surface tension demonstrated high durability in heated water immersion test, whereas durability in hydrodynamic conditions is closely correlated to lubricant viscosity. Results showed that a lubricant-infused surface will maintain its non-wetting properties in dropwise condensation conditions for approximately 1.5 years.

36 MATERIALS SCIENCE↗

Is the centrality dependence of the elliptic flow v{sub 2} and of the average <p{sub T}> more than a core-corona effect?

Recently we showed that the centrality dependence of the multiplicity of different hadron species observed in Relativistic Heavy Ion Collider (RHIC) and Super Proton Synchrotron (SPS) experiments can be well understood in a simple model, dubbed the core-corona model. There it is assumed that those incoming nucleons that scatter only once produce hadrons as in pp collisions whereas those that scatter more often form an equilibrated source which decays according to phase space. In this article we show that also kinematical variables such as v{sub 2}/{epsilon}{sub part}(N{sub part}) as well as v{sub 2}{sup i}/{epsilon}{sub part}(N{sub part}) and <p{sub T}{sup i}(N{sub part})> of identified particles are well described in this model. The correlation of <p{sub T}{sup i}> between peripheral heavy-ion collisions and pp collisions for different hadrons, reproduced in this model, questions whether hydrodynamical calculations are the proper tool to describe a noncentral heavy-ion collision. The model explains as well the centrality dependence of v{sub 2}/{epsilon}{sub part} of charged particles, considered up to now as an observable that allows us to determine the viscosity of the quark-gluon plasma. The observed dependence of v{sub 2}{sup i}/{epsilon}{sub part}(N{sub part}) on the particle species is a simple consequence of the different ratios of core-to-corona particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beta-induced Alfven-acoustic eigenmodes in stellarator plasmas with low shear

The coupling of low-frequency Alfvenic modes with acoustic oscillations due to curvature of the background magnetic field is considered for stellarator plasmas with low shear. Magnetohydrodynamic (MHD) analysis demonstrates that the interaction between these branches can generate gaps in the continua with a width proportional to beta as well as the magnitude of the Fourier harmonics of the magnetic field strength which cause the coupling. The gaps can provide a habitat for beta-induced Alfven-acoustic eigenmodes (BAAEs). Using the causality principle, a technique is developed to resolve the singular behavior of the MHD BAAE eigenmode equation at the points of resonance with the acoustic continuum. Alternatively, the singularities arising in the reduced MHD description can be resolved by accounting for the finite parallel electrical field. Both approaches yield consistent continuum damping rate, which proves to be small. Numerical calculations for analytically fitted experimental profiles of electron-dominated plasma in Helically Symmetric eXperiment (HSX) facility yield two weakly damped BAAE modes with different frequencies: one is close to the maximum of the lower-frequency Alfven-acoustic continuum, and the other is located well within the BAAE gap. The numerically found BAAEs have frequencies in the same range as the experimentally observed electromagnetic modes in HSX, even when the finite diamagnetic frequency effects are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Blob motion and control in simple magnetized plasmas

The radial propagation of plasma blobs and possibilities of influencing it are investigated in the TORPEX toroidal experiment [Fasoli et al., Phys. Plasmas 13, 055902 (2006)]. The effect of changing the connection length and the neutral background pressure on blob velocity is measured and trends are found to agree with predictions from a previous study [Theiler et al., Phys. Rev. Lett. 103, 065001, (2009)]. Effects on blob motion due to a change in limiter material and geometry are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Elliptic flow of charged pions, protons and strange particles emitted in Pb+Au collisions at top SPS energy

Differential elliptic flow spectra v 2 (p T ) of π - , K$0\atop{2}$, p, Λ have been measured at √s NN around midrapidity by the CERN-CERES/NA45 experiment in mid-central Pb + Au collisions (10% of σ geo ). The pT range extends from about 0.1 GeV/c (0.55 GeV/c for Λ) to more than 2 GeV/c. Protons below 0.4 GeV/c are directly identified by dE/dx. At higher pT, proton elliptic flow is derived as a constituent, besides π + and K + , of the elliptic flow of positive pion candidates. This retrieval requires additional inputs: (i) of the particle composition, and (ii) of v 2 (p T ) of positive pions. For (i), particle ratios obtained by NA49 are adapted to CERES conditions; for (ii), the measured v 2 (p T ) of negative pions is substituted, assuming π + and π - elliptic flow magnitudes to be sufficiently close. The v 2 (p T ) spectra are compared to ideal-hydrodynamics calculations. In synopsis of the series π - , K$0\atop{2}$-p-Λ, flow magnitudes are seen to fall with decreasing pT progressively even below hydro calculations with early kinetic freeze-out (T f =160 MeV) leaving not much time for hadronic evolution. The proton v 2 (p T ) data show a downward swing towards low p T with excursions into negative v 2 values. The pion-flow isospin asymmetry observed recently by STAR at RHIC, invalidating in principle our working assumption, is found in its impact on proton flow bracketed from above by the direct proton flow data, and not to alter any of our conclusions. Results are discussed in perspective of recent viscous hydrodynamics studies which focus on late hadronic stages.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evolution of the bounded magnetized jet and comparison with Helimak experiments

Magnetized jets are important features of many systems of physical interest. To date, most interest has focused on solar and space physics and astrophysical applications, and hence the unbounded magnetized jet, and its cousin, the unbounded magnetized wake, have received the most attention. This work presents calculations of a bounded, magnetized jet for a laboratory experiments in the Helimak device [K. W. Gentle and H. He, Plasma Sci. Technol. 10, 284 (2008)]. The Helimak device has a toroidal magnetic field with a controlled velocity flow that represents jets in bounded systems. Experimental and theoretical features include three spatial dimensions, the inclusion of resistivity and viscosity, and the presence of no-slip walls. The results of the linearized model are computed with a Chebyshev-{tau} algorithm. The bounding walls stabilize the ideal varicose mode found in unbounded magnetized jets. The ideal sinuous mode persists in the bounded system. A comparison theorem is proved showing that two-dimensional modes are more unstable than the corresponding three-dimensional modes for any given set of system parameters. This result is a generalization of the hydrodynamic Squires theorem. An energy-stress theorem indicates that the Maxwell stress is crucial for the growth of the instability. The results of the analysis are consistent with the observed plasma fluctuations with in the limits of using a simple model for the more complex measured jet velocity flow profile. The working gas is singly ionized argon and the jet velocity profile is accurately measured with Doppler shift spectroscopy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of alpha heating in inertial fusion: Alpha-heating metrics and the onset of the burning-plasma regime

Here, a detailed and comprehensive 1-dimensional theory of alpha-heating metrics is developed to determine the onset of burning plasma regimes in inertial fusion implosions. The analysis uses an analytic model of the deceleration, stagnation, and burn phases of inertial confinement fusion implosions combined with the results from a database of radiation-hydrodynamic simulations. The onset of the burning-plasma regime occurs when the alpha-heating rate in the hot spot exceeds the compression power input and is represented by the parameter Q α = 1/2 α energy/PdV work. A second burning plasma regime is also identified, where the alpha-heating rate exceeds the compression input to the entire stagnated plasma, including the hot spot and confining shell, and is represented by Q tot α . It is shown that progress towards the burning-plasma regime is correlated with the yield enhancement caused by alpha-heating but is more accurately related to the fractional alpha energy f α = 1/2 α energy/hot-spot energy . In the analysis presented here, we develop a method to infer these intermediate metrics from experiments and show that the alpha power produced in National Ignition Facility High-Foot implosions is approximately 50% of the external input power delivered to the hot spot and 25% of the total external power (from compression) delivered to the stagnated core.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of Plasma Liner Driven Magnetized Target Fusion Via Advanced Simulations

The feasibility of the plasma liner driven Magnetized Target Fusion (MTF) via terascale numerical simulations will be assessed. In the MTF concept, a plasma liner, formed by merging of a number (60 or more) of radial, highly supersonic plasma jets, implodes on the target in the form of two compact plasma toroids, and compresses it to conditions of the fusion ignition. By avoiding major difficulties associated with both the traditional laser driven inertial confinement fusion and solid liner driven MTF, the plasma liner driven MTF potentially provides a low-cost and fast R&D path towards the demonstration of practical fusion energy. High fidelity numerical simulations of full nonlinear models associated with the plasma liner MTF using state-of-art numerical algorithms and terascale computing are necessary in order to resolve uncertainties and provide guidance for future experiments. At Stony Brook University, we have developed unique computational capabilities that ideally suite the MTF problem. The FronTier code, developed in collaboration with BNL and LANL under DOE funding including SciDAC for the simulation of 3D multi-material hydro and MHD flows, has beenbenchmarked and used for fundamental and engineering problems in energy science applications. We have performed 3D simulations of converging supersonic plasma jets, their merger and the formation of the plasma liner, and a study of the corresponding oblique shock problem. We have studied the implosion of the plasma liner on the magnetized plasma target by resolving Rayleigh-Taylor instabilities in 2D and 3D and other relevant physics and estimate thermodynamic conditions of the target at the moment of maximum compression and the hydrodynamic efficiency of the method.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnosing implosion velocity and ablator dynamics at NIF (u)

An enhanced understanding of the unique physics probed in a burning NIP capsule is important for both nuclear weapons physics and thermonuclear ignition. In this talk we introduce a new diagnostic idea, designed to measure dynamic aspects of the capsule implosion that are not currently accessible. The current set of diagnostics for the NIF experiments includes reaction history (a time resolved measure of the d + t burn), neutron time-of-flight and spectrometry and spatial imaging of the neutron production and scattering. Although valuable, this abbreviated set of diagnostics cannot determine key dynamical properties of the implosion, such as implosion velocity (v{sub impl}) and ablator thickness. To surpass the present limits of {approx} 10{sup 15} d+t reactions, it will be necessary to increase significantly the implosion energy delivered to the DT fuel by finely tuning the balance between the remaining (imploding) ablator mass and velocity. If too much mass remains, the implosion velocity will be too slow, and the subsecpwnt PdV work will not be sufficient to overcome cooling via conduction and radiation. If too little mass remains, hydrodynamic instabilities will occur, resulting in unpredictable and degraded performance. Detailed calculations suggest the ablator must reach an implosion velocity of 3-4 x 10{sup 7} cm/sec and an areal density of {rho}{Delta}R {approx}200 mg/cm{sup 2} in order to achieve ignition. The authors present a new scheme to measure these important quantities using neutron reactions on the ablator material. During the burn, the ablator is moving relative to the 14.1 MeV d+t neutrons that are traversing the capsule. The resulting neutron-ablator Doppler shift causes a few unique nuclear reactions to become sensitive detectors of the ablator velocity at peak burn time. The 'point-design' capsule at the NIF will be based on a {sup 9}Be ablator, and the {sup 9}Be(n,p){sup 9}Li reaction has an energy threshold of 14.2 MeV, making it the ideal probe. As discussed in detail below, differences in the ablalor velocity lead to significant differences in the rate of {sup 9}Li production. We present techniques for measuring this {sup 9}Li implosion velocity diagnostic at the NIF . The same experimental techniques measuring neutron reactions on the ablator material, will allow us to determine other important dynamical quantities, such as the areal density ({rho}{Delta}R) and approximate thickness ({Delta}R) of the ablator at peak burn.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Constraints on ion velocity distributions from fusion product spectroscopy

Abstract Recent inertial confinement fusion experiments have shown primary fusion spectral moments which are incompatible with a Maxwellian velocity distribution description. These results show that an ion kinetic description of the reacting ions is necessary. We develop a theoretical classification of non-Maxwellian ion velocity distributions using the spectral moments. At the mesoscopic level, a monoenergetic decomposition of the velocity distribution reveals there are constraints on the space of spectral moments accessible by isotropic distributions. General expressions for the directionally dependent spectral moments of anisotropic distributions are derived. At the macroscopic level, a distribution of fluid element velocities modifies the spectral moments in a constrained manner. Experimental observations can be compared to these constraints to identify the character and isotropy of the underlying reactant ion velocity distribution and determine if the plasma is hydrodynamic or kinetic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toward a Realistic Representation of Sucrose Transport in the Phloem of Plants

The significance of phloem hydrodynamics to plant mortality and survival, which impacts ecosystem-scale carbon and water cycling, is not in dispute. The phloem provides the conduits for products of photosynthesis to be transported to different parts of the plant for consumption or storage. The M$\ddot{u}$nch pressure flow hypothesis (PFH) is the leading framework to mathematically represent this transport. It assumes that osmosis provides the necessary pressure differences to drive water and sucrose within the phloem. Mathematical models utilizing the PFH approximate the phloem by a relatively rigid slender semi-permeable tube. However, the phloem consists of living cells that contract and expand in response to pressure fluctuations. The effect of membrane elasticity on osmotically driven sucrose front speed has rarely been considered and frames the scope here. Laboratory experiments were conducted to elucidate the elastic-to-plastic pressure-deformation relation in membranes and their effect on sucrose front speeds. It is demonstrated that membrane elasticity acts to retard the sucrose front speed. The retardation emerges because of two effects: (a) part of the osmotic pressure is diverted to perform mechanical work to expand the membrane instead of pressurizing water, and (b) expansion of the membrane reduces the sucrose concentration driving osmotic potential due to volume increases and concomitant dilution effects. Finally, these results offer a novel perspective about the much discussed presence of sieve plates throughout the phloem acting as structural expansion dampers.

59 BASIC BIOLOGICAL SCIENCES↗

Quantitative radiography for determining density fluctuations in HED experiments

We have developed a method to extract density fluctuation measurements from x-ray radiographs of high-energy density (HED) instability growth and turbulence experiments. We use this information to calculate density fluctuation statistics for constraining the performance of turbulent mix models in HED systems. The density calculation combines image filtering, removal of systemic effects such as backlighter variation, calculation of transmission across multiple materials, and use of tracer materials to generate an approximate single-material density field. From the density map, we calculate both average density and a variance-like moment b (density-specific-volume covariance), which we compare to our models. We infer both quantities from a single image, which is significantly more information than the historic single scalar mix width measurements. We also develop a method of analyzing simulation outputs that incorporate both the density fluctuation metric from a turbulence model and the bulk material maps from the hydrodynamic code. This analysis helps address the question of how to initialize the simulations for best comparison to data from systems with large separations of scale in the mixing perturbation initial condition. We find that our data analysis method yields 1D average density and b curves with similar morphology and amplitudes as those from preliminary simulation comparisons.

47 OTHER INSTRUMENTATION↗

Hydrostatics and steady dynamics of spatially varying electromechanical flow structures

The hydrostatic and steady laminar hydrodynamic equilibria of spatially varying electromechanical flow structures are investigated. Under certain conditions the relationship between the dielectric height of rise and the applied voltage is found to be double valued. It is found that one of the two equilibrium values is always unstable. This gives rise to the experimentally observed spontaneous rise of the fluid to the top of the structure, once a certain critical voltage is reached. Starting above this critical voltage with the structure completely filled and decreasing the applied voltage toward the critical value results in pinch-in failure at an intermediate point along the structure and trapping of dielectric fluid at the top. The simple mathematical model developed predicts all these phenomena, without recourse to tedious point-by-point surface force equilibrium determination. Experiments are reported which verify the results for the hydrostatic case.

Jones, T. B.↗

Feasibility of an experiment on clumping induced by the Crow instability along a shocked cylinder

The growth of three-dimensional perturbations subject to the Crow instability along a vortex dipole resulting from the passage of a shock wave through a heavy gaseous cylinder is examined numerically. A linear stability analysis is performed based on geometric parameters extracted from two-dimensional simulations to determine the range of unstable wavenumbers, which is found to extend from 0.0 to 1.3 when normalized by the core separation distance. The analysis is then verified by comparison to three-dimensional simulations, which clearly show the development of the instability and the pinch-off of the vortex dipole into isolated vortex rings, which manifest as clumps of the original cylinder material. A scaling law is developed to determine the relevant spatiotemporal scales of the instability development, which is then used to assess the feasibility of a high-energy-density experiment visualizing clump formation. Specifically, a shocked cylinder with an initial diameter of 100 μm consisting of a perturbation of approximate wavelength and amplitude of 600 and 10 μm, respectively, is expected to form clumps resulting from the Crow instability approximately 40 ns after it is shocked, with dynamics which can be readily visualized on the Omega EP laser facility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparison of tungsten versus molybdenum for double shell capsules using machine learning design optimization

Double shell targets are an alternative ignition platform for inertial confinement fusion. One design consideration for double shell targets is the choice of inner shell material to help trap radiation emitted by the hot fuel to aid ignition. Materials such as molybdenum and tungsten are of interest for the inner shell layer of the targets. While molybdenum has a lower density that could inhibit instability growth and allow for radiography and code benchmarking, tungsten has a higher density that could provide more compression and confinement. These tradeoffs have been explored using optimized designs for each material. Our previous work [Vazirani et al., “Coupling 1D xRAGE simulations with machine learning for graded inner shell design optimization in double shell capsules,” Phys. Plasmas 28, 122709 (2021); Vazirani et al., “Coupling multi-fidelity xRAGE with machine learning for graded inner shell design optimization in double shell capsules,” Phys. Plasmas 30, 062704 (2023); and Vazirani et al., “Bayesian batch optimization for molybdenum versus tungsten inertial confinement fusion double shell target design,” Stat. Anal. Data Min. 17, e11698 (2024)] resulted in a multi-fidelity Bayesian optimization framework to find yield-optimized double shell target geometries. By leveraging simulations of varying fidelities (one-dimensional and two-dimensional) to inform one another, the multi-fidelity optimization was able to optimize a design in the highest fidelity with significantly fewer simulations than would be used in a systematic parameter scan. In this work, we apply the multi-fidelity Bayesian optimization to explore the optimized designs of double shell targets with molybdenum and tungsten inner shells as well as the physics producing the high performing implosions. A physics exploration of all the simulations used in this study shows trends in designs that contribute to high yields, ion temperatures, and fuel areal densities. Comparison of molybdenum and tungsten simulations shows that they can produce similar implosion conditions with different geometries, which would be important to study in experiments. Graded density layers produce varying performances with the two materials but continue to be of interest for future studies along with studies of doped inner shell materials and applied surface roughness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Excitation of surface and volume plasmons in a metal nanosphere by fast electrons

Collective multipole oscillations (surface and volume plasmons) excited in a metal nanosphere by moving electron and corresponding inelastic scattering spectra are studied based on the hydrodynamic approach. Along with the bulk (dielectric) losses traditionally taken into account, the surface and radiative ones are also considered as the physical mechanisms responsible for the plasmon damping. The second and third mechanisms are found to be essential for the surface plasmons (at small or large cluster radii, respectively) and depend very differently on the multipole mode order. The differential equations are obtained which describe the temporal evolution of every particular mode as that one of a linear oscillator excited by the given external force, and the electron energy loss spectra are calculated. The changes in spectrum shape with the impact parameter and with the electron passage time are analyzed; the first of them is found to be in good enough agreement with the data of scanning transmission electron microscopy experiments. It is shown that, in the general case, a pronounced contribution to the formation of the loss spectrum is given by the both surface and volume plasmons with low and high multipole indices. In particular, at long electron passage time, the integral (averaged over the impact parameter) loss spectrum which is calculated for the free-electron cluster model contains two main peaks: a broad peak from merging of many high-order multipole resonances of the surface plasmons and a narrower peak of nearly the same height from merged volume plasmons excited by the electrons that travel through the central region of the cluster. Comparatively complex dependences of the calculated excitation coefficients and damping constants of various plasmons on the order of the excited multipole result in wide diversity of possible types of the loss spectrum even for the same cluster material and should be taken into account in interpretation of corresponding electron energy loss spectroscopy experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pore-Scale Analysis of the Permeability Damage and Recovery during Cyclic Freshwater and Brine Injection in Porous Media Containing Non-Swelling Clays

Permeability damage in subsurface porous media caused by clay mobilization is encountered in many engineering applications, such as geothermal energy, water disposal, oil recovery, and underground CO2 storage. During the freshwater injection into rocks containing brine, the sudden decrease in salinity causes native clay fines to detach and clog pore throats, leading to a significant decline in permeability. The clay fines detach due to weakened net-attractive forces binding them to each other and the grain. Past experiments link this permeability damage on the immediate history of the salinity and the direction of flow. To better understand this phenomenon, we conducted pore-scale simulations of cyclic injection of freshwater and brine into sandstone containing Kaolinite clay. Our simulations establish a link between the clay-fine trajectory and the permeability trend observed by Khilar and Fogler (1983). For a uniform clay size of 3 microns, we observe a permeability decline by two orders of magnitude during freshwater injection with respect to brine injection. Increasing salinity and simultaneously reversing flow direction restores the permeability. The permeability restoration upon reversing the brine flow direction is attributed to the unblocking of pore throats in the reverse direction by the movement of the clay particles along the grain surfaces by the hydrodynamic force and the strong net-attractive force under high salinity.

Bhuvankar, Pramod (ORCID:000000027739973X)↗