Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Photoionization measurement study

An analysis was conducted of a gas window photoionization device for studying cosmic X-rays in the region 20 eV to 1 keV. The detecting element is an argon proportional counter whose window is a two-dimensional supersonic gas jet. Spectroscopic features of the incoming radiation can be determined by the choice of gas forming the jet (as well by the fluid dynamic parameters of the flow). The choice of gas can be made from pure substances and/or compounds with Z between 1 and 10. The counter walls can be prepared for selective analysis of the extreme ultraviolet radiation.

Sandri, G.↗

Hydrogen density measurements using an open-ended microwave cavity.

The density measurement of liquid hydrogen and two-phase mixtures of liquid and gaseous hydrogen is considered. This paper describes a complete prototype system that uses an open-ended microwave cavity for making dynamic density measurements of flowing hydrogen in a transfer line. The theory of operation along with test results for both the single- and two-phase cases are presented and discussed.

Wenger, N. C.↗

Supersonic unstalled flutter

Flutter analyses were developed to predict the onset of supersonic unstalled flutter of a cascade of two-dimensional airfoils. The first of these analyzes the onset of supersonic flutter at low levels of aerodynamic loading (i.e., backpressure), while the second examines the occurrence of supersonic flutter at moderate levels of aerodynamic loading. Both of these analyses are based on the linearized unsteady inviscid equations of gas dynamics to model the flow field surrounding the cascade. These analyses are utilized in a parametric study to show the effects of cascade geometry, inlet Mach number, and backpressure on the onset of single and multi degree of freedom unstalled supersonic flutter. Several of the results are correlated against experimental qualitative observation to validate the models.

Adamczyk, J. J.↗

Power train analysis for the DOE/NASA 100-kW wind turbine generator

Progress in explaining variations of power experienced in the on-line operation of a 100 kW experimental wind turbine-generator is reported. Data are presented that show the oscillations tend to be characteristic of a wind-driven synchronous generator because of low torsional damping in the power train, resonances of its large structure, and excitation by unsteady and nonuniform wind flow. The report includes dynamic analysis of the drive-train torsion, the generator, passive driveline damping, and active pitch control as well as correlation with experimental recordings. The analysis assumes one machine on an infinite bus with constant generator-field excitation.

Seidel, R. C.↗

Supersonic unstalled flutter

Recently two flutter analyses have been developed at NASA Lewis Research Center to predict the onset of supersonic unstalled flutter of a cascade of two-dimensional airfoils. The first of these analyzes the onset of supersonic flutter at low levels of aerodynamic loading (i.e., backpressure), while the second examines the occurrence of supersonic flutter at moderate levels of aerodynamic loading. Both of these analyses are based on the linearized unsteady inviscid equations of gas dynamics to model the flow field surrounding the cascade. The details of the development of the solution to each of these models have been published. The objective of the present paper is to utilize these analyses in a parametric study to show the effects of cascade geometry, inlet Mach number, and backpressure on the onset of single and multi degree of freedom unstalled supersonic flutter. Several of the results from this study are correlated against experimental qualitative observation to validate the models.

Adamczyk, J. J.↗

Erosional processes in channelized water flows on Mars

A hypothesis is investigated according to which the Martian outflow channels were formed by high-velocity flows of water or dynamically similar liquid. It is suggested that the outflow channels are largely the result of several interacting erosional mechanisms, including fluvial processes involving ice covers, macroturbulence, streamlining, and cavitation.

Baker, V. R.↗

Magnetospheric observation of large sub-auroral electric fields

An example of large subauroral poleward electric fields similar to those observed on OGO-6, S3-2 and AE-C (SAID) has been found in the magnetosphere near L = 4 and 2300 MLT using ISEE-1 electric field data. The event is located adjacent to and outside the plasmapause and occurs 1 1/2 hours into a substorm. The event is accompaned by a significant penetration of the convection electric field inside the plasmasphere. Data from similar regions on the next orbit occurring near the beginning of a substorm did not exhibit these effects. Recent theoretical models predict SAID to occur in the trough regions, where substorm dynamics force currents to flow in regions of low conductivity. These models provide a first-order interpretation of this phenomena; however, the overal picture is more complex.

Maynard, N. C.↗

Observations of the velocity distribution of solar wind ions

Measurements made by the Isee 3 ion composition experiment have been used to determine the kinetic temperatures of 3He(++), 4He(++), 16O(6+), and 16O(7+) in the solar wind. It is found that these temperatures generally obey the relation that T(i)/m(i) equals const, but fluctuations, some of which are caused by dynamical effects in the flow, are observed. The temperature of oxygen sometimes rises above 10 K, which is very strong evidence for heating outside the collisional region of the corona. The tendency toward equal temperatures per nucleon occurs everywhere where collisions are unimportant, suggesting that the temperatures are set up close to the sun rather than elsewhere in the interplanetary medium. The velocity distribution function of helium is observed to be non-Maxwellian, with a pronounced high velocity tail.

Ogilvie, K. W.↗

The dynamics of fibril magnetic fields. III - Fibril configurations in steady flows. IV - Trapping in closed convective rolls

The present investigation has the objective to provide an illustration of the equilibrium form of a hypothetical fibril field beneath the surface of the sun. Equilibrium fibril paths in static and moving atmospheres are considered. The provided examples are related to horizontal flows in an atmosphere in which the two anchor points of the arched fibril lie along the flow direction relative to each other. A brief introduction to the subject of the motion of horizontal fibrils in convective rolls is also presented, taking into account some implications for the sun. The equations of motion for a slender, buoyant flux tube extending horizontally along a closed convective roll are solved to illustrate the motion of the flux tube relative to the fluid, and attention is given to theoretical possibilities for the escape of flux tubes from a large horizontal convective roll in the sun.

Parker, E. N.↗

SPAR improved structure-fluid dynamic analysis capability, phase 2

An efficient and general method of analyzing a coupled dynamic system of fluid flow and elastic structures is investigated. The improvement of Structural Performance Analysis and Redesign (SPAR) code is summarized. All error codes are documented and the SPAR processor/subroutine cross reference is included.

Pearson, M. L.↗

The Geoscience Laser Altimetry/Ranging System (GLARS)

The Geoscience Laser Altimetry Ranging System (GLARS) is a highly precise distance measurement system to be used for making extremely accurate geodetic observations from a space platform. It combines the attributes of a pointable laser ranging system making observations to cube corner retroreflectors placed on the ground with those of a nadir looking laser altimeter making height observations to ground, ice sheet, and oceanic surfaces. In the ranging mode, centimeter-level precise baseline and station coordinate determinations will be made on grids consisting of 100 to 200 targets separated by distances from a few tens of kilometers to about 1000 km. These measurements will be used for studies of seismic zone crustal deformations and tectonic plate motions. Ranging measurements will also be made to a coarser, but globally distributed array of retroreflectors for both precise geodetic and orbit determination applications. In the altimetric mode, relative height determinations will be obtained with approximately decimeter vertical precision and 70 to 100 meter horizontal resolution. The height data will be used to study surface topography and roughness, ice sheet and lava flow thickness, and ocean dynamics. Waveform digitization will provide a measure of the vertical extent of topography within each footprint. The planned Earth Observing System is an attractive candidate platform for GLARS since the GLAR data can be used both for direct analyses and for highly precise orbit determination needed in the reduction of data from other sensors on the multi-instrument platform. (1064, 532, and 355 nm)Nd:YAG laser meets the performance specifications for the system.

Cohen, S. C.↗

Wind tunnel requirements for computational fluid dynamics code verification

The role of experiment in the development of Computational Fluid Dynamics (CFD) for aerodynamic flow field prediction is discussed. Requirements for code verification from two sources that pace the development of CFD are described for: (1) development of adequate flow modeling, and (2) establishment of confidence in the use of CFD to predict complex flows. The types of data needed and their accuracy differs in detail and scope and leads to definite wind tunnel requirements. Examples of testing to assess and develop turbulence models, and to verify code development, are used to establish future wind tunnel testing requirements. Versatility, appropriate scale and speed range, accessibility for nonintrusive instrumentation, computerized data systems, and dedicated use for verification were among the more important requirements identified.

Marvin, Joseph G.↗

Thermal and dynamical effects of pair production on two-temperature accretion flows

The two-temperature criterion for quasi-spherical (ion-pressure supported) accretion onto a black hole, including the effects of electron-positron pair production is studied. For an interesting range of accretion rates, Coulomb interactions between protons and pairs can cool the innermost regions of the accretion flow. The cooled plasma, assumed to possess some angular momentum, will collapse onto the equatorial plane, forming an optically thick annulus. Hysteresis effects involved in the cooling criterion are expected to lead to bistability or time dependence, which may be associated with variability in certain classes of active galactic nuclei (AGNs). Radiation from the annulus may be responsible for the EUV/soft X-ray excess observed in some AGNs.

Begelman, Mitchell C.↗

A review of research in rotor loads

The research accomplished in the area of rotor loads over the last 13 to 14 years is reviewed. The start of the period examined is defined by the 1973 AGARD Milan conference and the 1974 hypothetical rotor comparison. The major emphasis of the review is research performed by the U.S. Army and NASA at their laboratories and/or by the industry under government contract. For the purpose of this review, two main topics are addressed: rotor loads prediction and means of rotor loads reduction. A limited discussion of research in gust loads and maneuver loads is included. In the area of rotor loads predictions, the major problem areas are reviewed including dynamic stall, wake induced flows, blade tip effects, fuselage induced effects, blade structural modeling, hub impedance, and solution methods. It is concluded that the capability to predict rotor loads has not significantly improved in this time frame. Future progress will require more extensive correlation of measurements and predictions to better understand the causes of the problems, and a recognition that differences between theory and measurement have multiple sources, yet must be treated as a whole. There is a need for high-quality data to support future research in rotor loads, but the resulting data base must not be seen as an end in itself. It will be useful only if it is integrated into firm long-range plans for the use of the data.

Bousman, William G.↗

Accuracy requirements and benchmark experiments for CFD validation

The role of experiment in the development of Computation Fluid Dynamics (CFD) for aerodynamic flow prediction is discussed. The CFD verification is a concept that depends on closely coordinated planning between computational and experimental disciplines. Because code applications are becoming more complex and their potential for design more feasible, it no longer suffices to use experimental data from surface or integral measurements alone to provide the required verification. Flow physics and modeling, flow field, and boundary condition measurements are emerging as critical data. Four types of experiments are introduced and examples given that meet the challenge of validation: flow physics experiments; flow modeling experiments; calibration experiments; and verification experiments. Measurement and accuracy requirements for each of these differ and are discussed. A comprehensive program of validation is described, some examples given, and it is concluded that the future prospects are encouraging.

Marvin, Joseph G.↗

Calculation of wall and free turbulent-shear flows at supersonic speeds

Supersonic turbulent flows are simulated numerically by solving the Reynolds-averaged full Navier-Stokes equations by an implicit finite-volume method. This flux-vector-split upwind scheme uses approximate factorization followed by line-Gauss-Seidel relaxations. The effects of turbulence are modeled by two eddy viscosity models. High-Reynolds-number form of the k-epsilon model is coupled with a wall-function to avoid excessive refinement of the grid in the low-Reynolds number regions. The k-epsilon equations are solved by the explicit-implicit MacCormack method. The algebraic Baldwin-Lomax model is also being used as an inexpensive alternative for the cases which do not experience massive separation. Several examples of two-dimensional solutions are given to illustrate both wall and free turbulent shear flows which include fluid dynamic phenomena, such as shocks, boundary layers, shear layers, wakes, separations and recirculations. The results compared with experimental data show good agreeent.

Baysal, O.↗

What happens to the large eddies when net drag reduction is achieved by outer flow manipulators?

The tandem-arranged parallel plate manipulator (TAPPM) presently used to generate a flow with net drag reduction is conditionally sampled and found to exhibit significant changes of the boundary layer's large-scale motions at 20 delta(0), where delta(0) is the boundary layer thickness at the upstream plate of the TAPPM. Flow fields in the 'valleys' are equally affected. Both turbulent and irrotational flows then reestablish themselves by 50 delta(0). Flow visualization indicates that the TAPPM wake is very coherent at 20 delta(0), and has not yet spread into the wall region, while large scale motions and the ambient response flow continue to exhibit dynamic changes. This indicates that the shielding effect of the TAPPM's wake prolongs suppression of large-scale motions, thereby reducing skin friction over a sufficiently long extent of the boundary layer to overcome device drag and yield net drag reductions.

Falco, R. E.↗

MHD aspects of magnetotail dynamics

The equations of ideal MHD represent the conservation of mass, momentum, and energy; thus, MHD must, in some broad sense, provide a correct description of large-scale structure of the earth's magnetosphere. However, steady-state, ideal MHD (the simplest description) allows only a static interaction between the solar wind and the magnetosphere. Hence an MHD theory of magnetospheric dynamics must involve unsteady flow turbulence, such as might be generated by Kelvin-Helmholtz turbulence at the magnetopause, and dissipative transport, such as reconnection, which violates ideal MHD. This brief review summarizes recent theoretical efforts to explore and extend the early MHD magnetospheric models of Axford and Petschek. Analytic calculations show that steady convection in the magnetotail is nearly impossible. Global magnetospheric simulations exhibit substorm reconnection phenomena for southward IMF and predict a novel convection pattern for northward IMF. Reconnection simulations show plasmoid formation and field-aligned current flows in the tail. The Kelvin-Helmholtz instability can provide a strong anomalous viscosity which can drive the viscous convection system.

Coroniti, F. V.↗