SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A 55 foot diameter disk-gap-band parachute was deployed behind an expandable 15 foot diameter, 120 deg blunted-cone simulated spacecraft. The spacecraft was carried to altitude in the folded condition. An automatic control system kept the folded spacecraft pointing in the desired direction after booster separation. The aeroshell was then erected at the desired conditions by ground command. When the desired parachute test conditions were reached, another ground command deployed the test parachute. The test Mach number and dynamic pressure obtained at the parachute peak load were 2.62 and 19.4 pounds per square foot respectively. A large disturbance after aeroshell erection caused a large angle of attack to exist at parachute deployment. Methods of preventing this disturbance are discussed.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The results of three turbulent heating predictions (Van Driest II, Spalding-Chi, and Walker Eckert reference enthalpy) have been compared to the data of several re-entry vehicles. Details and comparisons of each technique with the data are presented. The data analyzed cover a range of local Mach numbers of 3.3 to 15.2, wall to boundary layer edge temperature ratio of 0.46 to 2.6 and local Reynolds number of 7 times 10 to the 6th power to 5.3 times 10 to the 8th power. Data were transformed to an incompressible plane, using the prediction methods above, and compared with the Colburn and von Karman forms of the Reynolds analogy. The results indicate that the reference enthalpy technique best fits the data when the Colburn analogy was used; whereas, the Van Driest II method agrees with both forms of the Reynolds analogy. The Spalding-Chi method tends to under predict the data. Finally, there does not appear to be any significant difference when comparing the incompressible Stanton number as a function of Renolds number based on either wetted length or momentum thickness.
It was demonstrated that the multispectral image dissector camera is able to provide composite pictures of the earth surface from high altitude overflights. An electronic deflection feature was used to inject the gyro error signal into the camera for correction of aircraft motion.
A method to determine free-field aircraft noise spectra from wind-tunnel measurements has been developed. The crux of the method is the correction for reverberations. Calibrated loud speakers are used to simulate model sound sources in the wind tunnel. Corrections based on the difference between the direct and reverberant field levels are applied to wind-tunnel data for a wide range of aircraft noise sources. To establish the validity of the correction method, two research aircraft - one propeller-driven (YOV-10A) and one turbojet-powered (XV-5B) - were flown in free field and then tested in the wind tunnel. Corrected noise spectra from the two environments agree closely.
Explore the source record for details and available documents.
Visual data on formation and motion of lift-induced wingtip vortex were obtained by stationary, airflow visualization method. Visual data indicated that vortex cannot be eliminated by merely reshaping wingtip. Configuration change will likely have only small effect on far-field flow.
A method for evaluating aircraft takeoff performance from brake release to air-phase height that requires fewer tests than conventionally required is evaluated with data for the XB-70 airplane. The method defines the effects of pilot technique on takeoff performance quantitatively, including the decrease in acceleration from drag due to lift. For a given takeoff weight and throttle setting, a single takeoff provides enough data to establish a standardizing relationship for the distance from brake release to any point where velocity is appropriate to rotation. The lower rotation rates penalized takeoff performance in terms of ground roll distance; the lowest observed rotation rate required a ground roll distance that was 19 percent longer than the highest. Rotations at the minimum rate also resulted in lift-off velocities that were approximately 5 knots lower than the highest rotation rate at any given lift-off distance.
The parameter identification scheme being used is a differential correction least squares procedure (Gauss-Newton method). The position, orientation, and derivatives of these quantities with respect to the parameters of interest (i.e., sensitivity coefficients) are determined by digital integration of the equations of motion and the parametric differential equations. The application of this technique to three vastly different sets of data is used to illustrate the versatility of the method and to indicate some of the problems that still remain.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Tests of the Viking 16.15-meter nominal-diameter disk-gap-band parachute were conducted at Mach number and dynamic pressure conditions which bracketed the range postulated for the Viking '75 mission to Mars. Parachutes were deployed at supersonic, transonic, and subsonic speeds behind a simulated Viking entry capsule. All parachutes successfully deployed, inflated, and exhibited sufficient drag and stability for mission requirements. Basic parachute data including loads, drag coefficients, pull-off angles, and canopy area ratios are presented. Trajectory reconstruction and onboard camera data methods were combined to yield continuous histories of both parachute and test-vehicle angular motions which are presented for the period from parachute deployment through steady inflation.
Results are given of an extensive investigation of conventional landing flares in general aviation type airplanes. A wide range of parameters influencing flare behavior are simulated in experimental landings in a variable-stability Navion. The most important feature of the flare is found to be the airplane's deceleration in the flare. Various effects on this are correlated in terms of the average flare load factor. Piloting technique is extensively discussed. Design criteria are presented.
The XV-5B fan-in-wing aircraft and the Y0V-10 RCF rotating cylinder flap aircraft were subjected to wind tunnel tests. These tests were conducted specifically to provide for correlation between wind tunnel and inflight aerodynamics and noise test data. Correlation between aerodynamic and noise data are presented and testing techniques that are related to the accuracy of the data, or that might affect the correlations, are discussed.
A general procedure is presented for systematic development of rotorcraft models for use in systems identification, which includes fuselage and rotor degrees of freedom (DOF). Formulations for rigid blade flap and lag as well as the normal mode representation of an elastic blade are developed for hingeless and articulated rotor systems. The method of multiblade coordinates is used to obtain linear constant coefficient state variable models of various levels of approximation. Two of the approximate models, a 6 DOF, are identified from a nonlinear articulated helicopter computer simulation. The results demonstrate the accuracy attainable for each model. Advanced results outline the status of rotorcraft modeling and systems identification and indicate areas that require further investigation.