Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Factorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Measurements of the reflection factor of flat ground surfaces

Measurements are made of the reflection factors of asphalt, concrete, and sod at oblique angles of incidence. Initial measurements were carried out in an anechoic chamber to eliminate the effects of wind and temperature gradients. These were followed by measurements made outdoors over a wider frequency range. Data are presented for the magnitudes of the reflection factors of asphalt, concrete, and sod at angles of incidence of 38 deg and 45 deg.

Ventres, C. S.↗
NASA NTRS1977

Line blocking factors in the ultraviolet spectra of 35 B6 to A0 stars

Observed line-blocking factors for stars of spectral types B6 to A0 are presented which were measured on spectral tracings observed over the wavelength ranges from 2064 to 2158 A, 2496 to 2590 A, and 2775 to 2867 A with the S 59 spectrometer on the ESRO TD 1A satellite. Twenty-six stars having normal spectra were observed along with 12 stars having abnormal spectra. The results for normal and abnormal stars are compared to determine the changes in line blocking related to each type of spectral peculiarity. Detailed descriptions are given of the line-blocking factors in different spectral channels for a B8 supergiant, three Be stars, a shell star, two eclipsing binaries, an Hg-Mn star, and several peculiar B and A stars.

Underhill, A. B.↗
NASA NTRS1977

An implicit factored scheme for the compressible Navier-Stokes equations

An implicit finite difference scheme is developed for the numerical solution of the compressible Navier-Stokes equations in conservation-law form. The algorithm is second-order-time accurate, noniterative, and spatially factored. In order to obtain an efficient factored algorithm, the spatial cross-derivatives are evaluated explicitly. However, the algorithm is unconditionally stable and, although a three-time-level scheme, requires only two-time-levels of data storage. The algorithm is constructed in a 'delta' form (i.e., increments of the conserved variables and fluxes) that provides a direct derivation of the scheme and leads to an efficient computational algorithm. In addition, the delta form has the advantageous property of a steady-state (if one exists) independent of the size of the time step. Numerical results are presented for a two-dimensional shock boundary-layer interaction problem.

Beam, R. M.↗
NASA NTRS1977

Transverse shear effects on the stress-intensity factor for a circumferentially cracked, specially orthotropic cylindrical shell

The problem of a cylindrical shell containing a circumferential through crack is considered by taking into account the effect of transverse shear deformations. The formulation is given for a specially orthotropic material within the confines of a linearized shallow shell theory. The particular theory used permits the consideration of all five boundary conditions regarding moment and stress resultants on the crack surface. Consequently, aside from multiplicative constants representing the stress intensity factors, the membrane and bending components of the asymptotic stress fields near the crack tip are found to be identical. The stress intensity factors are calculated separately for a cylinder under a uniform membrane load, and that under a uniform bending moment. Sample results showing the nature of the out-of-plane crack surface displacement and the effect of the Poisson's ratio are presented.

Delale, F.↗
NASA NTRS1978

Stress-Intensity Factors for Corner Cracks at the Edge of a Hole

Stress-intensity factors, calculated by a three-dimensional finite-element analysis, for shallow or deep quarter-elliptical corner cracks at the edge of a hole in a finite-thickness plate are presented. The plate was subjected to remote uniform tension, remote bending, or simulated pin loading in the hole. The crack depth-to-plate thickness ranged from 0.2 to 0.8, while the ratio of crack depth-to-plate crack length ranged from 0.2 to 2. The ratio of hole radius-to-plate thickness was held at 0.5. To verify the accuracy of the three-dimensional finite-element models empolyed, convergence studies were conducted (number of degrees of freedom ranged from 4400 to 9300). The stress-intensity factor variations along the crack front are presented and compared with other solutions from the literature.

Raju, I. S.↗
NASA NTRS1978

Numerical procedure to determine geometric view factors for surfaces occluded by cylinders

A numerical procedure was developed to determine geometric view factors between connected infinite strips occluded by any number of infinite circular cylinders. The procedure requires a two-dimensional cross-sectional model of the configuration of interest. The two-dimensional model consists of a convex polygon enclosing any number of circles. Each side of the polygon represents one strip, and each circle represents a circular cylinder. A description and listing of a computer program based on this procedure are included in this report. The program calculates geometric view factors between individual strips and between individual strips and the collection of occluding cylinders.

Sawyer, P. L.↗
NASA NTRS1977

On the factorization and fitting of molecular scattering information

The reported analysis is based on the factored IOS T-matrix. It is shown that line shape measurements may be used over a range of temperatures to evaluate inelastic scattering cross sections. Basic factorization or parameterization relations are derived by considering the wavefunction equations. The parameterization of cross sections is considered, taking into account the differential scattering amplitude and cross section, integral cross sections, phenomenological cross sections for general relaxation processes, and viscosity and diffusion cross sections. Thermal averages and rates are discussed, giving attention to integral cross sections and rates, and general phenomenological cross sections. The results of computational studies are also presented.

Goldflam, R.↗
NASA NTRS1978

Analysis of simulated measurements of earth emitted radiation using geometric shape factors, and some results from analysis of ESSA 7 and Nimbus 6 data

In the reported study, simulated measurements of earth radiation with wide field-of-view (WFOV) radiometers are reduced to earth fluxes through geometric shape factors. Estimates of emitted flux for global and zonal scales and for regions smaller than the detector field-of-view are compared to fluxes derived directly from a model. Geometric shape factors are used to estimate global, zonal, and regional averages of earth-emitted flux from measurements with WFOV detectors on the ESSA 7 satellite and the Nimbus 6 satellite. Zonal and global averages of emitted flux for each of the 3-month periods of ESSA 7 data are shown in a graph. Another graph shows zonal and global averages of emitted flux for August 1975 obtained with the aid of Nimbus 6. The data are compared to values reported by Green and Smith (1977) who used a spherical harmonic solution.

Weaver, W. L.↗
NASA NTRS1979

Shoreline as a controlling factor in commercial shrimp production

The author has identified the following significant results. An ecological model was developed that relates marsh detritus export and shrimp production. It was based on the hypothesis that the shoreline is a controlling factor in the production of shrimp through regulation of detritus export from the marsh. LANDSAT data were used to develop measurement of shoreline length and areas of marsh having more than 5.0 kilometers of shoreline per square kilometer of area for the Louisiana coast, demonstrating the capability of remote sensing to provide important geographic information. These factors were combined with published tidal ranges and salinities to develop a mathematical model that predicted shrimp production for nine geographic units of the Louisiana coast, as indicated by the long term average commercial shrimp yield.

Faller, K. H.↗
NASA NTRS1979

A reduced volumetric expansion factor plot

A reduced volumetric expansion factor plot was constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors were found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

Hendricks, R. C.↗
NASA NTRS1978

Filtering and error analysis via the UDU super T covariance factorization

Kalman filter algorithms based on the UDU super T covariance factorization are discussed, with special attention given to algorithm implementation efficiency. A U-D-factored covariance error-analysis algorithm is formulated, and its efficiency and numerical stability are demonstrated in a representative orbit determination problem. The numerical results are compared with those obtained using covariance error-analysis formulas, and the comparison highlights the numerical superiority of the present algorithm. A byproduct of the U-D analysis is a highly efficient algorithm mechanization of the arbitrary gain covariance update formula.

Thornton, C. L.↗
NASA NTRS1978

Three-dimensional radiative exchange factors for nongray, nondiffuse surfaces

A computer program using a variation of the Monte Carlo method was developed to predict radiative exchange factors in three-dimensional configurations with curved surfaces. The model allows for arbitrary emission, absorption, and reflection characteristics and for radiation exchange between surfaces as well as external irradiation through openings. It was shown that exchange factors can be determined efficiently by using the normal Monte Carlo method for closed configurations and/or high surface emissivities, while energy partitioning is vastly superior in the case of open configurations and/or low surface emissivities. Comparison with some experiments performed on the Space Shuttle heat rejection system demonstrates the model's accuracy as well as its superiority over a simplified diffuse-surface analysis, which requires similar amounts of computer time.

Modest, M. F.↗
NASA NTRS1979

Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness plates

Surface cracks are among the more common flaws in aircraft and pressure vessel components. Several calculations of stress-intensity factors for semi-elliptical surface cracks subjected to tension have appeared in the literature. However, some of these solutions are in disagreement by 50-100%. In this paper, stress-intensity factors for shallow and deep semi-elliptical surface cracks in plates subjected to tension are presented. To verify the accuracy of the three-dimensional finite-element models employed, convergence was studied by varying the number of degrees of freedom in the models from 1500 to 6900. The 6900 degrees of freedom used here were more than twice the number used in previously reported solutions. Also, the stress-intensity variations in the boundary-layer region at the intersection of the crack with the free surface were investigated.

Raju, I. S.↗
NASA NTRS1978

Modal confidence factor in vibration testing

The theory and applications of a time domain modal test technique are presented. The method uses free decay of random responses from a structure under test to identify its modal characteristics namely, natural frequencies, damping factors, and mode shapes. The method can identify multimodal (highly coupled) systems and modes that have very small contribution in the responses. A method is presented to decrease the effects of high levels of noise in the data and thus improve the accuracy of identified parameters. This is accomplished using an oversized mathematical model. The concept of modal confidence factor (MCF) is developed. The MCF is a number calculated for every identified mode for a structure under test. The MCF varies from 0.000 for a distorted, nonlinear, or noise mode to 100.0 for a pure structural mode. The theory of the MCF is based on the correlation that exits between the modal deflection at a certain station and the modal deflection at the same station delayed in time. The theory and application of the MCF is illustrated by two experiments. The first experiment deals with simulated responses from a two degree of freedom system with 20 percent, 40 percent, and 100 percent noise added. The second experiment was run on a generalized payload model. The free decay response from the payload model contained about 22 percent noise.

Ibrahim, S. R.↗
NASA NTRS1980

An approximate factorization solution of the Navier-Stokes equations for transonic flow using body-fitted coordinates with application to NACA 64A010 airfoils

The implementation of the approximate factorization algorithm and its ability to efficiently and accurately describe transonic flow about an NACA 64A010 airfoil section is examined. The approximate factorization algorithm is developed from the nondimensional, conservative, vectorized Navier-Stokes equations expressed in curvilinear coordinates. Equations of state and transport coefficient relations appropriate to atmospheric air are appended to close the system of partial differential equations. An algebraic turbulence model is also incorporated into the equation set. This algorithm was verified by investigating the flow about an NACA 64A010 airfoil at 0, 2, and 3.5 deg angle of attack for free-stream conditions of 2,000,000 Reynolds number and 0.8 Mach number. Overall results were in good qualitative agreement with wind tunnel data sets. However, while nondimensional times of six were attained, numerical difficulties prevented any case from reaching a true steady state.

Copper, G. K.↗
NASA NTRS1980

A pilot's assessment of helicopter handling-quality factors common to both agility and instrument flying tasks

A series of simulation and flight investigations were undertaken to evaluate helicopter flying qualities and the effects of control system augmentation for nap-of-the-Earth (NOE) agility and instrument flying tasks. Handling quality factors common to both tasks were identified. Precise attitude control was determined to be a key requirement for successful accomplishment of both tasks. Factors that degraded attitude controllability were improper levels of control sensitivity and damping, and rotor system cross coupling due to helicopter angular rate and collective pitch input. Application of rate command, attitude command, and control input decouple augmentation schemes enhanced attitude control and significantly improved handling qualities for both tasks. The NOE agility and instrument flying handling quality considerations, pilot rating philosophy, and supplemental flight evaluations are also discussed.

Gerdes, R. M.↗
NASA NTRS1979

A reduced volumetric expansion factor plot

A reduced volumetric expansion factor plot has been constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors have been found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

Hendricks, R. C.↗