Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXPONENTIAL FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Effect of the Hydrogen Concentration on the Pd/n-InP Schottky Diode Photocurrent

The variation rate of the short-circuit photocurrent of Pd/n-InP Schottky diodes is studied as a function of the presence of hydrogen in a gas mixture with H{sub 2} concentrations of 1–100 vol %. It is shown that upon the simultaneous exposure of the Schottky diode to a hydrogen-containing gas mixture and to light (λ = 0.9 μm), the hydrogen concentration in the gas mixture and the Pd/n-InP diode photocurrent variation rate are related exponentially. The Schottky-diode response rate to the presence of hydrogen in the gas mixture increases with the illumination intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Random matrix approach to three-dimensional QCD with a Chern-Simons term

We propose a random matrix theory for QCD in three dimensions with a Chern-Simons term at level k which spontaneously breaks the flavor symmetry according to U(2Nf) → U(Nf+k)×U(Nf-k). This random matrix model is obtained by adding a complex part to the action for the k = 0 random matrix model. We derive the pattern of spontaneous symmetry breaking from the analytical solution of the model. Additionally, we obtain explicit analytical results for the spectral density and the spectral correlation functions for the Dirac operator at finite matrix dimension, that become complex. In the microscopic domain where the matrix size tends to infinity, they are expected to be universal, and give an exact analytical prediction to the spectral properties of the Dirac operator in the presence of a Chern-Simons term. Here, we calculate the microscopic spectral density. It shows exponentially large (complex) oscillations which cancel the phase of the k = 0 theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of nuclear reactor radiation on the performance of AlN/sapphire surface acoustic wave devices

The performance of an AlN/sapphire surface acoustic wave (SAW) delay line device was characterized in real time under irradiation inside a nuclear reactor. Both its resonant frequency and transmission efficiency were observed to respond to a change in reactor power. The response follows an exponentially saturating behavior after a step power increase, followed by an exponentially decaying recovery after reactor shutdown. A sensitivity analysis based on the governing electro-mechanical equations shows that the frequency shift can be attributed to the softening of sapphire’s elastic constants under neutron radiation. Additionally, a kinetic rate equation is adopted to interpret device response and describe its microstructural evolution. These results suggest that the AlN/sapphire SAW device remains functional under irradiation, is sensitive to neutron and gamma ray fluxes, and offers an opportunity for remote sensing and in-situ measurement of material properties when exposed to nuclear reactor environment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

More on rotations as spin matrix polynomials

Any nonsingular function of spin j matrices always reduces to a matrix polynomial of order 2j. The challenge is to find a convenient form for the coefficients of the matrix polynomial. The theory of biorthogonal systems is a useful framework to meet this challenge. Central factorial numbers play a key role in the theoretical development. Explicit polynomial coefficients for rotations expressed either as exponentials or as rational Cayley transforms are considered here. Structural features of the results are discussed and compared, and large j limits of the coefficients are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploring Hilbert space on a budget: Novel benchmark set and performance metric for testing electronic structure methods in the regime of strong correlation

This work explores the ability of classical electronic structure methods to efficiently represent (compress) the information content of full configuration interaction (FCI) wave functions. We introduce a benchmark set of four hydrogen model systems of different dimensionalities and distinctive electronic structures: a 1D chain, a 1D ring, a 2D triangular lattice, and a 3D close-packed pyramid. To assess the ability of a computational method to produce accurate and compact wave functions, we introduce the accuracy volume, a metric that measures the number of variational parameters necessary to achieve a target energy error. Using this metric and the hydrogen models, we examine the performance of three classical deterministic methods: (i) selected configuration interaction (sCI) realized both via an a posteriori (ap-sCI) and variational selection of the most important determinants, (ii) an a posteriori singular value decomposition (SVD) of the FCI tensor (SVD-FCI), and (iii) the matrix product state representation obtained via the density matrix renormalization group (DMRG). We find that the DMRG generally gives the most efficient wave function representation for all systems, particularly in the 1D chain with a localized basis. For the 2D and 3D systems, all methods (except DMRG) perform best with a delocalized basis, and the efficiency of sCI and SVD-FCI is closer to that of DMRG. For larger analogs of the models, the DMRG consistently requires the fewest parameters but still scales exponentially in 2D and 3D systems, and the performance of SVD-FCI is essentially equivalent to that of ap-sCI.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Warm Ionized Medium throughout the Sagittarius–Carina Arm

Wisconsin H-Alpha Mapper observations of Hα and [S ii] λ6716 emission are used to trace the vertical distribution and physical conditions of the warm ionized medium along the Sagittarius–Carina arm. CO emission, tracing cold molecular gas in the plane of the Galaxy, is used as a guide to isolate Hα and [S ii] λ6716 emission along individual spiral arms. Exponential scale heights of electron density squared (or emission measure) are determined using Hα emission above (below) the midplane to be 330±80 pc (550±230 pc) along the near Sagittarius arm, 300±100 pc (250±30 pc) along the near Carina arm, and >1000 pc along the far Carina arm. The emission measure scale height tends to increase as a function of Galactocentric radius along the Sagittarius–Carina arm for R{sub G}>8 kpc. Physical conditions of the ionized gas are analyzed using the [S ii]/Hα line ratio, which more closely traces I {sub Hα} than height above the plane, z, suggesting a stronger relationship with the in situ electron density. We interpret this result as further evidence for the majority of the observed diffuse emission originating from in situ ionized gas as opposed to scattered light from classical H ii regions in the plane.

79 ASTRONOMY AND ASTROPHYSICS↗

Atmospheric microwave refractivity and refraction

The atmospheric refractivity can be expressed as a function of temperature, pressure, water vapor content, and operating frequency. Based on twenty-year meteorological data, statistics of the atmospheric refractivity were obtained. These statistics were used to estimate the variation of dispersion, attenuation, and refraction effects on microwave and millimeter wave signals propagating along atmospheric paths. Bending angle, elevation angle error, and range error were also developed for an exponentially tapered, spherical atmosphere.

Yu, E.↗

Current QSO statistics - Implications for the intergalactic medium

The results of numerous QSO surveys have been compiled and analyzed to form a single spatially averaged QSO ionizing function that is independent of evolution mode (number density or luminosity). An intergalactic medium (IGM) that satisfies the observational constraints may now have a density with respect to closure of approximately 0.1, which is substantially less than hitherto modeled. The aggregate of QSO data also indicate that if evolution is due to number density, then, when split into luminosity classes, an exponential in look-back time fits the data better than a power law, and the evolution rates increase roughly with absolute luminosity if analyzed by the exponential.

Sherman, R. D.↗

The 60 micron to 20 centimeter infrared-to-radio ratio within spiral galaxies

A detailed comparison is presented of the distribution of 60 micron IR and 20 cm radio continuum emission within 25 galaxies, mostly disk spirals. Local maxima in the thermal IR and nonthermal radio emission are found to be spatially coincident on scales of less than about 0.4 kpc in the nearest sample galaxies. The IR-red disk in normal spirals appears to be characterized by a shorter scale length than that of the radio continuum disk, suggesting that the IR-to-radio ratio should decrease as a function of radius. A model that successfully accounts for the observations is introduced which is based on the assumptions of steady-state star formation activity within the disk on kpc scales and a tight coupling between the origins of the dust-heating radiation and the radio-emitting cosmic-ray electrons. The underlying source is described as an exponential disk. The results also suggest that a random walk process cannot by itself describe the temporal evolution of cosmic rays.

Bicay, M. D.↗

A Diagnostic Analysis of the Kennedy Space Center LDAR Network 2. Cross-Sensor Studies

Range dependencies in total (intracloud and cloud to ground) lightning observed by the Kennedy Space Center Lightning Detection and Ranging (LDAR) network are established through cross comparison with other lightning sensors. Using total lightning observed from space by the Lightning Imaging Sensor (LIS), MAR flash detection efficiency is shown to remain above 90% out to 90-100 km range, and to be below 25% at 200 km range. MAR VHF source location error distributions are also determined as a function of range and are found to be asymmetric with standard deviation increasing roughly as r 2 . Range normalization schemes for total VHF source density are tested and shown to yield significant improvements in correlation with National Lightning Detection Network (NLDN) ground flash density at hourly, daily, monthly, and climatological timescales (up to 50% over uncorrected source densities using an exponential-in-range correction factor with 40-50 km e-folding scale).

Boccippio, D. J.↗

Fast dynamic aperture optimization with forward-reversal integration

A fast dynamic aperture (DA) optimization method for storage rings has been developed through the use of reversal integration. Even if dynamical systems have an exact reversal symmetry, a numerical forward integration differs from its reversal. For a chaotic trajectory, cumulative round-off errors are scaled, which results in an exponential growth on the difference. The exponential effect is a generic chaos indicator which represents the sensitivity of the chaotic motion to its initial condition. The chaos indicator of the charged particle motion can be obtained by comparing the forward integrations of particle trajectories with corresponding reversals, a.k.a. “backward integrations.” The indicator is observable even through short-term particle tracking simulations. Therefore, adopting it as an objective function could speed up optimization. Finally, the DA of the National Synchrotron Light Source II storage ring, and another test diffraction-limited light source ring, were optimized using this method for the purpose of demonstration.

43 PARTICLE ACCELERATORS↗

Minimal conditions for the existence of a Hawking-like flux

We investigate the minimal conditions that an asymptotically flat general relativistic spacetime must satisfy in order for a Hawking-like Planckian flux of particles to arrive at future null infinity. We demonstrate that there is no requirement that any sort of horizon form anywhere in the spacetime. We find that the irreducible core requirement is encoded in an approximately exponential 'peeling' relationship between affine coordinates on past and future null infinity. As long as a suitable adiabaticity condition holds, then a Planck-distributed Hawking-like flux will arrive at future null infinity with temperature determined by the e-folding properties of the outgoing null geodesics. The temperature of the Hawking-like flux can slowly evolve as a function of time. We also show that the notion of peeling of null geodesics is distinct from the usual notion of 'inaffinity' used in Hawking's definition of surface gravity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cosmic-ray pitch angle scattering in isotropic turbulence. II - Sensitive dependence on the dissipation range spectrum

The leading-order quasi-linear expressions for cosmic-ray pitch-angle scattering in isotropic magnetic turbulence were analyzed using three separate spectral forms: the Gaussian, the exponential, and the power-law. It is shown that the low-energy limit for the pitch-angle diffusion coefficient did not universally yield the 'slab' results obtained with a Gaussian dissipation range by Bieber et al. (1988). Instead, it was found that the low-energy limit depends on the steepness of the dissipation range spectrum, and the asymptotic functional forms can range between the slab results and the Fisk et al. (1974) results. It is also shown that the 90-deg pitch-angle limit displays a sensitive dependence on the form of the dissipation range spectrum and can depart dramatically from either the slab result or the result of Fisk.

Smith, Charles W.↗

Do optimization methods in deep learning applications matter?

With advances in deep learning, exponential data growth and increasing model complexity, developing efficient optimization methods are attracting much research attention. Several implementations favor the use of Conjugate Gradient (CG) and Stochastic Gradient Descent (SGD) as being practical and elegant solutions to achieve quick convergence, however, these optimization processes also present many limitations in learning across deep learning applications. Recent research is exploring higher-order optimization functions as better approaches, but these present very complex computational challenges for practical use. Comparing first and higher-order optimization functions, in this paper, our experiments reveal that Levemberg-Marquardt (LM) significantly supersedes optimal convergence but suffers from very large processing time increasing the training complexity of both, classification and reinforcement learning problems. Our experiments compare off-the-shelf optimization functions(CG, SGD, LM and L-BFGS) in standard CIFAR, MNIST, CartPole and FlappyBird experiments.The paper presents arguments on which optimization functions to use and further, which functions would benefit from parallelization efforts to improve pretraining time and learning rate convergence.

Ozyildirim, Buse Melis↗

Polymer Waste Valorization into Advanced Carbon Nanomaterials for Potential Energy and Environment Applications

The rise in universal population and accompanying demands have directed toward an exponential surge in the generation of polymeric waste. The estimate predicts that world-wide plastic production will rise to ≈590 million metric tons by 2050, whereas 5000 million more tires will be routinely abandoned by 2030. Handling this waste and its detrimental consequences on the Earth's ecosystem and human health presents a significant challenge. Converting the wastes into carbon-based functional materials viz. activated carbon, graphene, and nanotubes is considered the most scientific and adaptable method. Herein, this world provides an overview of the various sources of polymeric wastes, modes of build-up, impact on the environment, and management approaches. Update on advances and novel modifications made in methodologies for converting diverse types of polymeric wastes into carbon nanomaterials over the last 5 years are given. A remarkable focus is made to comprehend the applications of polymeric waste-derived carbon nanomaterials (PWDCNMs) in the CO 2 capture, removal of heavy metal ions, supercapacitor-based energy storage and water splitting with an emphasis on the correlation between PWDCNMs' properties and their performances. In conclusion, this review offers insights into emerging developments in the upcycling of polymeric wastes and their applications in environment and energy.

36 MATERIALS SCIENCE↗

The two-loop symbol of all multi-Regge regions

Here, we study the symbol of the two-loop n-gluon MHV amplitude for all Mandelstam regions in multi-Regge kinematics in N=4 super Yang-Mills theory. While the number of distinct Mandelstam regions grows exponentially with n, the increase of independent symbols turns out to be merely quadratic. We uncover how to construct the symbols for any number of external gluons from just two building blocks which are naturally associated with the six- and seven-gluon amplitude, respectively. The second building block is entirely new, and in addition to its symbol, we also construct a prototype function that correctly reproduces all terms of maximal functional transcendentality.

1/N expansion↗

Revising the dynamic energy budget theory with a new reserve mobilization rule and three example applications to bacterial growth

Dynamic energy budget (DEB) theory has been applied to model a wide range of organisms, including microbes. In the standard DEB model, biomass is partitioned into reserve and structural compartments, where reserve biomass is mobilized in a pseudolinear manner (while the reserve biomass density, defined as the ratio between reserve and structural biomass, decays linearly) to drive maintenance and the growth of structural biomass (and extracellular enzyme production if it is considered). However, the linear dynamics of the reserve biomass density makes the standard DEB model incapable of explaining the slowdown of microbial growth at high reserve density that is caused by macromolecular crowding effect which reduces biochemical reaction rates (a typical situation occurs when microbes are experiencing severe moisture stress) and is inconsistent with the observation that intracellular enzymatic reactions generally follow non-linear kinetics. By partitioning biomass into reserve, kinetic, and structural compartments, we show here that the Equilibrium Chemistry Approximation (ECA) kinetics can be used to represent enzymatically catalyzed reserve biomass mobilization that can then drive the kinetic and structural biomass synthesis. This revised DEB model better represents the tradeoff in ribosome allocation for structural growth and internal enzyme production, is structurally compatible with metabolic models of cell individuals, and includes the standard DEB model and the popular compromise model as special cases for representing population growth. We then applied the revised DEB model to interpret components of bacterial respiration, their dependence on substrate availability, and emergent microbial carbon use efficiency dynamics for an exponentially growing population. We found that the revised DEB model enables a better understanding of bacterial substrates use (carbon in our examples) than that can be derived from a few other models in the literature. In particular, the revised DEB model explains why carbon use efficiency may first increase, then plateau, and finally decrease with growth rate (and substrate uptake rate), as a function of proteomics. Additionally, the revised DEB model explains why the kinetic biomass compartment needs to be divided to reasonably incorporate proteomic control of microbial growth.

59 BASIC BIOLOGICAL SCIENCES↗

Close-contact melting on an isothermal surface with the inclusion of non-Newtonian effects

The present study deals with a theoretical investigation of a close-contact melting (CCM) process involving a vertical cylinder on a horizontal isothermal surface, where the liquid phase is a non-Newtonian viscoplastic fluid that behaves according to the Bingham model. Accordingly, a new approach is formulated based on the thin layer approximation and different quasi-steady process assumptions. By analytical derivation, an algebraic equation that relates the molten layer thickness and the solid bulk height is developed. The problem is then solved numerically, coupled with another equation for the melting rate. The new model shows that as the yield stress increases the melting rate decreases and the molten layer thickness increases. It is found that under certain conditions, the model can be reduced to a form that allows an analytical solution. The approximate model predicts an exponential dependence of both the melt fraction and the molten layer thickness. Comparison between the numerical and analytical solutions shows that the analytical approximation provides an excellent estimation for sufficiently large values of the yield stress. Dimensional analysis, which is supported by the analytical model results, reveals the dimensionless groups that govern the problem. For the general case, the melt fraction is a function of two dimensionless groups. For the analytical approximation, it is shown that the melt fraction is governed by a single dimensionless group and that the molten layer thickness is governed by two dimensionless groups.

Mechanics↗