Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EPITAXY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Passivation of GaSb using molecular beam epitaxy Y{sub 2}O{sub 3} to achieve low interfacial trap density and high-performance self-aligned inversion-channel p-metal-oxide-semiconductor field-effect-transistors

Molecular beam epitaxy deposited rare-earth oxide of Y{sub 2}O{sub 3} has effectively passivated GaSb, leading to low interfacial trap densities of (1–4) × 10{sup 12 }cm{sup −2} eV{sup −1} across the energy bandgap of GaSb. A high saturation drain current density of 130 μA/μm, a peak transconductance of 90 μS/μm, a low subthreshold slope of 147 mV/decade, and a peak field-effect hole mobility of 200 cm{sup 2}/V-s were obtained in 1 μm-gate-length self-aligned inversion-channel GaSb p-Metal-Oxide-Semiconductor Field-Effect-Transistors (MOSFETs). In this work, high-κ/GaSb interfacial properties were better in samples with a high substrate temperature of 200 °C than in those with high κ's deposited at room temperature, in terms of the interfacial electrical properties, particularly, the reduction of interfacial trap densities near the conduction band and the MOSFET device performance.

36 MATERIALS SCIENCE↗

Enlarged Mn 3s splitting and room-temperature ferromagnetism in epitaxially grown oxygen doped Mn{sub 2}N{sub 0.86} films

Single-phase and oxygen doped Mn{sub 2}N{sub 0.86} thin films have been grown on MgO (111) by plasma-assisted molecular beam epitaxy. The films grow under tensile strain and, remarkably, they show ferromagnetic-like interactions at low temperature and ferromagnetic ordering agreed well with the Bloch-law T{sup 3/2} at room-temperature. We further demonstrate the enlarged Mn 3s splitting (6.46 eV) and its possible relation to the observed ferromagnetism. Our study not only provide a strategy for further theoretical work on oxygen doped manganese nitrides, but also shed promising light on utilizing its room-temperature FM property to fabricate spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface reconstructions in molecular beam epitaxy of SrTiO{sub 3}

We show that reflection high-energy electron diffraction (RHEED) can be used as a highly sensitive tool to track surface and resulting film stoichiometry in adsorption-limited molecular beam epitaxy of (001) SrTiO{sub 3} thin films. Even under growth conditions that yield films with a lattice parameter that is identical to that of stoichiometric bulk crystals within the detection limit of high-resolution x-ray diffraction (XRD), changes in surface reconstruction occur from (1 × 1) to (2 × 1) to c(4 × 4) as the equivalent beam pressure of the Ti metalorganic source is increased. These surface reconstructions are correlated with a shift from mixed SrO/TiO{sub 2} termination to pure TiO{sub 2} termination. The crossover to TiO{sub 2} surface termination is also apparent in a phase shift in RHEED oscillations observed at the beginning of growth. Comparison with prior results for carrier mobilities of doped films shows that the best films are grown under conditions of a TiO{sub 2}-saturated surface [c(4 × 4) reconstruction] within the XRD growth window.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and morphology of epitaxial Bi{sub 2}Te{sub 2}Se topological insulator films

Epitaxial films of the ternary topological insulator Bi{sub 2}Te{sub 2}Se were grown on Si(111) substrates and investigated for their surface electronic properties and morphology. We employ a Se-capping procedure allowing for the preparation of clean films in the surface-analysis experimental setups. Using angle-resolved photoelectron spectroscopy, we determine the dispersion of the topological surface state. With time after surface preparation, the spectroscopic features in the surface electronic structure exhibit significant temperature-dependent shifts to higher binding energies. Scanning tunneling microscopy images show terraces with typical step edge separations of 50 nm–150 nm. X-ray photoelectron spectroscopy indicates an increased Se concentration at the surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

n{sup +}-GaN grown by ammonia molecular beam epitaxy: Application to regrown contacts

We report on the low-temperature growth of heavily Si-doped (>10{sup 20 }cm{sup −3}) n{sup +}-type GaN by N-rich ammonia molecular beam epitaxy (MBE) with very low bulk resistivity (<4 × 10{sup −4} Ω·cm). This is applied to the realization of regrown ohmic contacts on InAlN/GaN high electron mobility transistors. A low n{sup +}-GaN/2 dimensional electron gas contact resistivity of 0.11 Ω·mm is measured, provided an optimized surface preparation procedure, which is shown to be critical. This proves the great potentials of ammonia MBE for the realization of high performance electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Semipolar and nonpolar GaN epi-films grown on m-sapphire by plasma assisted molecular beam epitaxy

We hereby report the development of non-polar epi-GaN films of usable quality, on an m-plane sapphire. Generally, it is difficult to obtain high-quality nonpolar material due to the planar anisotropic nature of the growth mode. However, we could achieve good quality epi-GaN films by involving controlled steps of nitridation. GaN epilayers were grown on m-plane (10-10) sapphire substrates using plasma assisted molecular beam epitaxy. The films grown on the nitridated surface resulted in a nonpolar (10-10) orientation while without nitridation caused a semipolar (11-22) orientation. Room temperature photoluminescence study showed that nonpolar GaN films have higher value of compressive strain as compared to semipolar GaN films, which was further confirmed by room temperature Raman spectroscopy. The room temperature UV photodetection of both films was investigated by measuring the I-V characteristics under UV light illumination. UV photodetectors fabricated on nonpolar GaN showed better characteristics, including higher external quantum efficiency, compared to photodetectors fabricated on semipolar GaN. X-ray rocking curves confirmed better crystallinity of semipolar as compared to nonpolar GaN which resulted in faster transit response of the device.

36 MATERIALS SCIENCE↗

Atomic structure and bonding of the interfacial bilayer between Au nanoparticles and epitaxially regrown MgAl{sub 2}O{sub 4} substrates

A unique metal/oxide interfacial bilayer formed between Au nanoparticles and MgAl{sub 2}O{sub 4} substrates following thermal treatment is reported. Associated with the formation of the bilayer was the onset of an abnormal epitaxial growth of the substrate under the nanoparticle. According to the redistribution of atoms and the changes of their electronic structure probed across the interface by a transmission electron microscopy, we suggest two possible atomic models of the interfacial bilayer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Highly spin-polarized current in Co-substituted Fe{sub 3}O{sub 4} epitaxial thin films at room temperature

Epitaxial thin films of cobalt ferrite Co{sub x}Fe{sub 3−x}O{sub 4} (x = 0.0, 0.5, and 1.0) were fabricated on α-Al{sub 2}O{sub 3} (001) substrates using pulsed laser deposition. It was found that the coercive force of the cobalt ferrite films could be tuned by changing the Co content. The films prepared under low oxygen pressure (1.0 × 10{sup −6 }Pa) showed semiconducting behavior even for x = 1.0. X-ray photoelectron spectroscopy revealed that the Co ions were 2{sup +} for all compositions. On the other hand, it was found that the Fe ions were in the Fe{sup 2+}/Fe{sup 3+} valence state, which may cause small-polaron hopping among the Fe-3d electrons in the films. An anomalous Hall effect was observed in the Co{sub 0.5}Fe{sub 2.5}O{sub 4} film even at 300 K, suggesting that carriers in the films were highly spin-polarized at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Incorporation model of N into GaInNAs alloys grown by radio-frequency plasma-assisted molecular beam epitaxy

We present a Maxwell-Boltzmann electron energy distribution based model for the incorporation rate of nitrogen into GaInNAs grown by molecular beam epitaxy (MBE) using a radio frequency plasma source. Nitrogen concentration is predicted as a function of radio-frequency system primary resistance, N flow, and RF power, and group III growth rate. The semi-empirical model is shown to be repeatable with a maximum error of 6%. The model was validated for two different MBE systems by growing GaInNAs on GaAs(100) with variable nitrogen composition of 0%–6%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of C-doped bulk GaN wafers grown by halide vapor phase epitaxy

Freestanding bulk C-doped GaN wafers grown by halide vapor phase epitaxy are studied by optical spectroscopy and electron microscopy. Significant changes of the near band gap (NBG) emission as well as an enhancement of yellow luminescence have been found with increasing C doping from 5 × 10{sup 16} cm{sup −3} to 6 × 10{sup 17} cm{sup −3}. Cathodoluminescence mapping reveals hexagonal domain structures (pits) with high oxygen concentrations formed during the growth. NBG emission within the pits even at high C concentration is dominated by a rather broad line at ∼3.47 eV typical for n-type GaN. In the area without pits, quenching of the donor bound exciton (DBE) spectrum at moderate C doping levels of 1–2 × 10{sup 17} cm{sup −3} is observed along with the appearance of two acceptor bound exciton lines typical for Mg-doped GaN. The DBE ionization due to local electric fields in compensated GaN may explain the transformation of the NBG emission.

36 MATERIALS SCIENCE↗

High-power narrow-vertical-divergence photonic band crystal laser diodes with optimized epitaxial structure

900 nm longitudinal photonic band crystal (PBC) laser diodes with optimized epitaxial structure are fabricated. With a same calculated fundamental-mode divergence, stronger mode discrimination is achieved by a quasi-periodic index modulation in the PBC waveguide than a periodic one. Experiments show that the introduction of over 5.5 μm-thick PBC waveguide contributes to only 10% increment of the internal loss for the laser diodes. For broad area PBC lasers, output powers of 5.75 W under continuous wave test and over 10 W under quasi-continuous wave test are reported. The vertical divergence angles are 10.5° at full width at half maximum and 21.3° with 95% power content, in conformity with the simulated angles. Such device shows a prospect for high-power narrow-vertical-divergence laser emission from single diode laser and laser bar.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High In-content InGaN layers synthesized by plasma-assisted molecular-beam epitaxy: Growth conditions, strain relaxation, and In incorporation kinetics

We report the interplay between In incorporation and strain relaxation kinetics in high-In-content In{sub x}Ga{sub 1-x}N (x = 0.3) layers grown by plasma-assisted molecular-beam epitaxy. For In mole fractions x = 0.13–0.48, best structural and morphological qualities are obtained under In excess conditions, at In accumulation limit, and at a growth temperature where InGaN decomposition is active. Under such conditions, in situ and ex situ analyses of the evolution of the crystalline structure with the layer thickness point to an onset of misfit relaxation after the growth of 40 nm, and a gradual relaxation during more than 200 nm, which results in an inhomogeneous strain distribution along the growth axis. This process is associated with a compositional pulling effect, i.e., indium incorporation is partially inhibited in presence of compressive strain, resulting in a compositional gradient with increasing In mole fraction towards the surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Growth of non-polar (11-20) InGaN quantum dots by metal organic vapour phase epitaxy using a two temperature method

Non-polar (11-20) InGaN quantum dots (QDs) were grown by metal organic vapour phase epitaxy. An InGaN epilayer was grown and subjected to a temperature ramp in a nitrogen and ammonia environment before the growth of the GaN capping layer. Uncapped structures with and without the temperature ramp were grown for reference and imaged by atomic force microscopy. Micro-photoluminescence studies reveal the presence of resolution limited peaks with a linewidth of less than ∼500 μeV at 4.2 K. This linewidth is significantly narrower than that of non-polar InGaN quantum dots grown by alternate methods and may be indicative of reduced spectral diffusion. Time resolved photoluminescence studies reveal a mono-exponential exciton decay with a lifetime of 533 ps at 2.70 eV. The excitonic lifetime is more than an order of magnitude shorter than that for previously studied polar quantum dots and suggests the suppression of the internal electric field. Cathodoluminescence studies show the spatial distribution of the quantum dots and resolution limited spectral peaks at 18 K.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Polarized micro Raman scattering spectroscopy for curved edges of epitaxial graphene

This letter performed polarized microscopic laser Raman scattering spectroscopy on the curved edges of transferred epitaxial graphene on SiO{sub 2}/Si. The intensity ratio between the parallel and perpendicular polarized D band is evolved, providing a spectroscopy-based technique to probe the atomic-scale edge structures in graphene. A detailed analysis procedure for non-ideal disordered curved edges of graphene is developed combining the atomic-scale zigzag and armchair edge structures along with some point defects. These results could provide valuable information of the realistic edges of graphene at the atomic-scale that can strongly influence the performance of graphene-based nanodevices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxial growth and characterization of Bi{sub 2}Se{sub 3}/II-VI semiconductor heterostructures

Surfaces of three-dimensional topological insulators (TIs) have been proposed to host quantum phases at the interfaces with other types of materials, provided that the topological properties of interfacial regions remain unperturbed. Here, we report on the molecular beam epitaxy growth of II-VI semiconductor–TI heterostructures using c-plane sapphire substrates. Our studies demonstrate that Zn{sub 0.49}Cd{sub 0.51}Se and Zn{sub 0.23}Cd{sub 0.25}Mg{sub 0.52}Se layers have improved quality relative to ZnSe. The structures exhibit a large relative upward shift of the TI bulk quantum levels when the TI layers are very thin (∼6nm), consistent with quantum confinement imposed by the wide bandgap II-VI layers. Our transport measurements show that the characteristic topological signatures of the Bi{sub 2}Se{sub 3} layers are preserved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of CdTe bulk carrier lifetime and interface recombination velocity of CdTe/MgCdTe double heterostructures grown by molecular beam epitaxy

The bulk Shockley-Read-Hall carrier lifetime of CdTe and interface recombination velocity at the CdTe/Mg{sub 0.24}Cd{sub 0.76}Te heterointerface are estimated to be around 0.5 μs and (4.7 ± 0.4) × 10{sup 2 }cm/s, respectively, using time-resolved photoluminescence (PL) measurements. Four CdTe/MgCdTe double heterostructures (DHs) with varying CdTe layer thicknesses were grown on nearly lattice-matched InSb (001) substrates using molecular beam epitaxy. The longest lifetime of 179 ns is observed in the DH with a 2 μm thick CdTe layer. It is also shown that the photon recycling effect has a strong influence on the bulk radiative lifetime, and the reabsorption process affects the measured PL spectrum shape and intensity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation of GeSn alloy on Si(100) by low-temperature molecular beam epitaxy

GeSn alloys grown on Si(100) by the low-temperature (100 °C) molecular beam epitaxy are studied using scanning tunneling microscopy and Raman spectroscopy. It is found that the effect of Sn as a surfactant modifies substantially the low-temperature growth mechanism of Ge on Si. Instead of the formation of small Ge islands surrounded by amorphous Ge, in the presence of Sn, the growth of pure Ge islands appears via the Stranski-Krastanov growth mode, and a partially relaxed Ge{sub 1−x}Sn{sub x} alloy layer with the high Sn-fraction up to 40 at. % is formed in the area between them. It is shown that the observed growth mode induced by high surface mobility of Sn and the large strain of the pseudomorphic state of Ge to Si ensures the minimum elastic-strain energy of the structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graphene nanoribbon field-effect transistors on wafer-scale epitaxial graphene on SiC substrates

We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ∼10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ∼0.14 eV. Contrary to prior observations of disordered transport and severe edge-roughness effects of graphene nanoribbons (GNRs), the experimental results presented here clearly show that the transport mechanism in carefully fabricated GNRFETs is conventional band-transport at room temperature and inter-band tunneling at low temperature. The entire space of temperature, size, and geometry dependent transport properties and electrostatics of the GNRFETs are explained by a conventional thermionic emission and tunneling current model. Our combined experimental and modeling work proves that carefully fabricated narrow GNRs behave as conventional semiconductors and remain potential candidates for electronic switching devices.

36 MATERIALS SCIENCE↗