Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distribution parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

A simulation-based efficiency comparison of AC and DC power distribution networks in commercial buildings

Direct current (DC) power distribution has recently gained traction in buildings research due to the proliferation of on-site electricity generation and battery storage, and an increasing prevalence of internal DC loads. The research discussed in this paper uses Modelica-based simulation to compare the efficiency of DC building power distribution with an equivalent alternating current (AC) distribution. The buildings are all modeled with solar generation, battery storage, and loads that are representative of the most efficient building technology. A variety of paramet ric simulations determine how and when DC distribution proves advantageous. These simulations also validate previous studies that use simpler approaches and arithmetic efficiency models. This work shows that using DC distribution can be considerably more efficient: a medium sized office building using DC distribution has an expected baseline of 12% savings, but may also save up to 18%. In these results, the baseline simulation parameters are for a zero net energy (ZNE) building that can island as a microgrid. DC is most advantageous in buildings with large solar capacity, large battery capacity, and high voltage distribution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A CONDITIONAL LUMINOSITY FUNCTION MODEL OF THE COSMIC FAR-INFRARED BACKGROUND ANISOTROPY POWER SPECTRUM

The cosmic far-infrared background (CFIRB) is expected to be generated by faint, dusty star-forming galaxies during the peak epoch of galaxy formation. The anisotropy power spectrum of the CFIRB captures the spatial distribution of these galaxies in dark matter halos and the spatial distribution of dark matter halos in the large-scale structure. Existing halo models of CFIRB anisotropy power spectrum either are incomplete or lead to halo model parameters that are inconsistent with the galaxy distribution selected at other wavelengths. Here, we present a conditional luminosity function approach to describe the far-IR bright galaxies. We model the 250 {mu}m luminosity function and its evolution with redshift and model-fit the CFIRB power spectrum at 250 {mu}m measured by the Herschel Space Observatory. We introduce a redshift-dependent duty cycle parameter so that we are able to estimate the typical duration of the dusty star formation process in the dark matter halos as a function of redshifts. We find that the duty cycle of galaxies contributing to the far-IR background is 0.3-0.5 with a dusty star formation phase lasting for {approx}0.3-1.6 Gyr. This result confirms the general expectation that the far-IR background is dominated by star-forming galaxies in an extended phase, not bright starbursts that are driven by galaxy mergers and last {approx}10-100 Myr. The halo occupation number for satellite galaxies has a power-law slope that is close to unity over 0 < z < 4. We find that the minimum halo mass for dusty, star-forming galaxies with L {sub 250} > 10{sup 10} L {sub Sun} is 2 Multiplication-Sign 10{sup 11} M {sub Sun} and 3 Multiplication-Sign 10{sup 10} M {sub Sun} at z = 1 and 2, respectively. Integrating over the galaxy population with L {sub 250} > 10{sup 9} L {sub Sun }, we find that the cosmic density of dust residing in the dusty, star-forming galaxies is responsible for the background anisotropies {Omega}{sub dust} {approx} 3 Multiplication-Sign 10{sup -6} to 2 Multiplication-Sign 10{sup -5}, relative to the critical density of the universe.

79 ASTRONOMY AND ASTROPHYSICS↗

Transverse-momentum-dependent parton distribution function and jet transport in a nuclear medium

We show that the gauge-invariant transverse-momentum-dependent (TMD) quark distribution function can be expressed as a sum of all higher-twist collinear parton matrix elements in terms of a transport operator. From such a general expression, we derive the nuclear broadening of the transverse-momentum distribution. Under the maximal two-gluon correlation approximation, in which all higher-twist nuclear multiple parton correlations with the leading nuclear enhancement are given by products of twist-two nucleon parton distributions, we find the nuclear transverse-momentum distribution as a convolution of a Gaussian distribution and the nucleon TMD quark distribution. The width of the Gaussian, or the mean total transverse-momentum broadening squared, is given by the path integral of the quark transport parameter q-circumflex{sub F} which can also be expressed in a gauge-invariant form and is given by the gluon distribution density in the nuclear medium. We further show that contributions from higher-twist nucleon gluon distributions can be resummed under the extended adjoint two-gluon correlation approximation and the nuclear transverse-momentum distribution can be expressed in terms of a transverse-scale-dependent quark transport parameter or gluon distribution density. We extend the study to hot medium and compare to dipole model approximation and N=4 supersymmetric Yang-Mills (SYM) theory in the strong coupling limit. We find that multiple gluon correlations become important in the strongly coupled system such as N=4 SYM plasma.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Approximate expression for the electric potential around an absorbing particle in isotropic collisionless plasma

A new approximate expression for the potential distribution around an absorbing particle in isotropic collisionless plasma is proposed. The approximate expression is given by the sum of the Debye-Hückel potential with an effective screening length and the far-field asymptote obtained from the solution of the linearized Poisson equation. In contrast to analogous models, the effective screening length is not fixed but depends on the distance from the particle. This allows us to obtain a more accurate approximation for the potential distribution in the entire range of distances. The dependence of the screening length on the distance is predicted from the analysis of the charge density distribution function. This dependence contains two adjustable parameters, which are calculated by applying the procedure based on charge balance considerations. Using the obtained results, simple expressions for the parameters of the model are proposed. In addition, a simple expression for the characteristic screening length, which can be used to approximate the potential distribution near the particle, is obtained. The developed model potential is shown to be in excellent agreement with the solution of the nonlinear Poisson equation for typical conditions used in experiments with complex plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bayesian mass estimates of the Milky Way: the dark and light sides of parameter assumptions

We present mass and mass profile estimates for the Milky Way (MW) Galaxy using the Bayesian analysis developed by Eadie et al. and using globular clusters (GCs) as tracers of the Galactic potential. The dark matter and GCs are assumed to follow different spatial distributions; we assume power-law model profiles and use the model distribution functions described in Evans et al. and Deason et al. We explore the relationships between assumptions about model parameters and how these assumptions affect mass profile estimates. We also explore how using subsamples of the GC population beyond certain radii affect mass estimates. After exploring the posterior distributions of different parameter assumption scenarios, we conclude that a conservative estimate of the Galaxy’s mass within 125 kpc is 5.22×10{sup 11} M{sub ⊙}, with a 50% probability region of (4.79,5.63)×10{sup 11} M{sub ⊙}. Extrapolating out to the virial radius, we obtain a virial mass for the MW of 6.82×10{sup 11} M{sub ⊙} with 50% credible region of (6.06,7.53)×10{sup 11} M{sub ⊙}(r{sub vir}=185{sub −7}{sup +7} kpc). If we consider only the GCs beyond 10 kpc, then the virial mass is 9.02 (5.69,10.86)×10{sup 11} M{sub ⊙} (r{sub vir}=198{sub −24}{sup +19} kpc). We also arrive at an estimate of the velocity anisotropy parameter β of the GC population, which is β=0.28 with a 50% credible region (0.21, 0.35). Interestingly, the mass estimates are sensitive to both the dark matter halo potential and visible matter tracer parameters, but are not very sensitive to the anisotropy parameter.

79 ASTRONOMY AND ASTROPHYSICS↗

Reconstructing probability distributions with Gaussian processes

Modern cosmological analyses constrain physical parameters using Markov Chain Monte Carlo (MCMC) or similar sampling techniques. Oftentimes, these techniques are computationally expensive to run and require up to thousands of CPU hours to complete. Here we present a method for reconstructing the log-probability distributions of completed experiments from an existing chain (or any set of posterior samples). Here, the reconstruction is performed using Gaussian process regression for interpolating the log-probability. This allows for easy resampling, importance sampling, marginalization, testing different samplers, investigating chain convergence, and other operations. As an example use case, we reconstruct the posterior distribution of the most recent Planck 2018 analysis. We then resample the posterior, and generate a new chain with 40 times as many points in only 30 min. Our likelihood reconstruction tool is made publicly available online.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of Neutron Importance Distribution in {sup 235}U Fast Critical Reactor

The reactor physics related integral experiments are significant to criticality safety analysis and the design of the next generation nuclear system. Measurements of parameters such as prompt neutron decay constant α, prompt neutron generation time Λ, effective delayed neutron fraction β{sub eff}, neutron importance distribution, etc., can provide data for the verification of calculation methods, computer codes and cross-section data in criticality safety analysis and test the design of new reactors. Among these parameters, neutron importance distribution has its unique value. Beside verification and validation of nuclear data, computer codes, and simulation methods, the experimental results of neutron importance distribution are also useful to the correcting of the spatial effects in Rossi-α measurement, which is based on point-reactor neutron kinetics. The relative neutron importance distribution experiments were performed on the {sup 235}U fast critical reactor of China Academy of Engineering Physics (CAEP). The key experimental objective was to obtain the importance distribution data for nuclear data validation and criticality safety analysis. We demonstrate in this paper the experiment and the data analysis. {sup 252}Cf neutron importance spatial distributions in the diametral hole of a depleted uranium reflected {sup 235}U fast critical reactor were measured. The evaluated uncertainties of the experiment data were varying with the source location but within 1.5% ranges in all. The experiment results can provide useful data for applications like nuclear data validation and the determination of rectification factor R of Rossi-a measurements. However, the experimental uncertainties are not satisfying and can be further reduced by using a {sup 252}Cf source with much higher intensity, recording more precisely the absolute position of the neutron source, and carrying out the experiment in more shallow subcritical states in which the system multiplication is larger. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nanocluster production for solar cell applications

This research focuses on the fabrication and characterization of silver (Ag) and silicon (Si) nanoclusters that might be used for solar cell applications. Silver and silicon nanoclusters have been synthesized by means of dc magnetron sputtering and inert gas condensation inside an ultra-high vacuum compatible system. We have found that nanocluster size distributions can be tuned by various source parameters, such as the sputtering discharge power, flow rate of argon inert gas, and aggregation length. Quadrupole mass filter and transmission electron microscopy were used to evaluate the size distribution of Ag and Si nanoclusters. Ag nanoclusters with average size in the range of 3.6–8.3 nm were synthesized (herein size refers to the nanocluster diameter), whereas Si nanoclusters' average size was controlled to range between 2.9 and 7.4 nm by controlling the source parameters. This work illustrates the ability of controlling the Si and Ag nanoclusters' sizes by proper optimization of the operation conditions. By controlling nanoclusters' sizes, one can alter their surface properties to suit the need to enhance solar cell efficiency. Herein, Ag nanoclusters were deposited on commercial polycrystalline solar cells. Short circuit current (I{sub SC}), open circuit voltage (V{sub OC}), fill factor, and efficiency (η) were obtained under light source with an intensity of 30 mW/cm{sup 2}. A 22.7% enhancement in solar cell efficiency could be measured after deposition of Ag nanoclusters, which demonstrates that Ag nanoclusters generated in this work are useful to enhance solar cell efficiency.

36 MATERIALS SCIENCE↗

Precision e + e − hemisphere masses in the dijet region with power corrections

We derive high-precision results for the e + e − heavy jet mass (HJM) dσ/dρ and dihemisphere mass (DHM) d 2 σ/(ds 1 ds 2 ) distributions, for s 1 ~ s 2 , in the dijet region. New results include: i) the N 3 LL resummation for HJM of large logarithms ln n (ρ) at small ρ including the exact two-loop non-global hemisphere soft function, the 4-loop cusp anomalous dimension and the 3-loop hard and jet functions, ii) N 3 LL results for DHM with resummation of logarithms ln(s 1,2 /Q 2 ) when there is no large separation between s 1 and s 2 , iii) profile functions for HJM to give results simultaneously valid in the peak and tail regions, iv) a complete two-dimensional basis of non-perturbative functions which can be used for double differential observables, that are needed for both HJM and DHM in the peak region, and v) an implementation of renormalon subtractions for large-angle soft radiation to $\mathcal{O}$ (α$^{3}_{s}$) together with a resummation of the additional large ln(Qρ/Λ QCD ) logarithms. Here Q is the e + e − center-of-mass energy. Our resummation results are combined with known fixed-order $\mathcal{O}$ (α$^{3}_{s}$) results and we discuss the convergence and remaining perturbative uncertainty in the cross section. We also prove that, at order 1/Q, the first moment of the HJM distribution involves an additional non-perturbative parameter compared to the power correction that shifts the tail of the spectrum (where 1 ≫ ρ ≫ Λ QCD /Q). This differs from thrust where a single non-perturbative parameter at order 1/Q describes both the first moment and the tail, and it disfavors models of power corrections employing a single non-perturbative parameter, such as the low-scale effective coupling model. In this paper we focus only on the dijet region, not the far-tail distribution for ρ ≳ 0.2 beyond which the trijet factorization and resummation become important.

Factorization↗

Role of colliding geometry on the balance energy of mass-asymmetric systems

We study the role of colliding geometry on the balance energy (E{sub bal}) of mass-asymmetric systems by varying the mass asymmetry ({eta} =A{sub T}-A{sub p}/A{sub T}+A{sub P}, where A{sub T} and A{sub P} are the masses of the target and projectile, respectively) from 0.1 to 0.7, over the mass range 40-240 and on the mass dependence of the balance energy. Our findings reveal that colliding geometry has a significant effect on the E{sub bal} of asymmetric systems. We find that, as we go from central collisions to peripheral ones, the effect of mass asymmetry on E{sub bal} increases throughout the mass range. Interestingly, we find that for every fixed system mass (A{sub tot}) the effect of the impact parameter variation is almost uniform throughout the mass-asymmetry range. For each {eta}, E{sub bal} follows a power-law behavior ({proportional_to}A{sup {tau}}) at all colliding geometries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-T-388: Evaluation of Electronic Brachytherapy Dose Distributions in Tissue Equivalent Materials

Purpose: To study the measured and calculated dose distributions for electronic brachytherapy (EBT) in various tissue equivalent homogenous materials. Methods: Calculated dose distributions in water were generated using published TG-43 parameters in Varian BrachyVision software for a 50 kVp, 50 cm Xoft source. Dose distributions were measured within a 3D-scanning tank using dosimeters including: PTW 0.125 cc, pin-point, and parallel-plate ion chambers, Sun Nuclear “Edge” diode and Gafchromic EBT3 film. Multi-channel film dosimetry was used in film analysis. EBT3 film curves were calibrated via radial dose comparison to both independently measured and published data. The resulting film calibration was utilized to measure dose distributions created by titanium filtered source utilized in clinical brachytherapy applications. Data was collected within homogenous PMMA, vinyl, polystyrene, paraffin, and water-equivalent plastic phantoms. Results: Ion-chamber data was corrected to effective points of measurement and normalized prior to comparison between calculated and measured dose distributions. Measurements made in water and water equivalent materials compared well with results from treatment planning software. The maximum percent differences (relative to water) observed between 1 cm and 3.5 cm depth from source for each of the phantom materials are as follows: PMMA 35%, polystyrene 41%, plastic-water 23%, vinyl 115%, and paraffin 46%. Conclusion: The increased probability of photoelectric interactions occurring within the patient during electronic brachytherapy will emphasize the radiological differences between varying human tissues in dose deposition. These differences can Result in clinically significant dose perturbations and it is therefore recommended to move to a model based dose calculation, as outlined in TG-186, to improve the dosimetric accuracy of low energy EBT.

60 APPLIED LIFE SCIENCES↗

Performance Assessment of a Generic Repository for Defense-Related HLW/SNF in Fractured Crystalline Host Rock - 17059

Recently the U.S. made a policy decision to begin R and D for geologic disposal of defense-related HLW/SNF in a facility separate from commercially generated waste. A deep geologic repository for the disposal of DOE-managed HLW, and some thermally cooler DOE-managed SNF, arising from defense and DOE R and D activities, is part of a stepwise, phased approach for disposal of the Nation's nuclear waste, as recommended by the Blue Ribbon Commission on America's Nuclear Future. The work discussed here focuses on post-closure safety (or performance) assessment for such a Defense Waste Repository (DWR), which is divided into four major activities: (1) development of generic reference cases (i.e., knowledge or technical bases for 'generic' or 'non-site-specific' deep geologic repositories); (2) features, events, and processes (FEPs) analyses and screening to support the technical bases and the performance assessment (PA) model; (3) performance evaluation of alternative EBS design concepts; and (4) post-closure safety analyses of the repository system under consideration. Using the known inventory of defense-related SNF, as well as defense-related HLW stored at the Savannah River and Hanford sites, the Geologic Disposal Safety Assessment (GDSA) Framework modeling and software system has been applied to simulate the potential performance of a DWR in crystalline host rock, resulting in a suite of single-realization (i.e., deterministic) and multi-realization (i.e., probabilistic) 3-D post-closure system analyses, over a performance period of one million years. Two types of emplacement concepts are examined, including single-canister vertical-borehole emplacement for the hotter defense SNF waste (KBS-3V concept) and multi-canister horizontal emplacement for defense HLW (similar to Yucca Mountain co-disposal waste packages). Sensitivity analyses examine the effect of key uncertain parameters on repository performance, including the effects of fracture distribution, waste package degradation rate, buffer and disturbed rock zone (DRZ) properties, and sorption parameters. Initial results indicate that a crystalline host rock with a connected fracture system may require additional safety features to ensure robustness of the isolation safety function, such as a deep unsaturated zone, a sufficiently thick sedimentary overburden, and/or a disposal overpack with a very slow corrosion rate. None of these should pose an undue obstacle for successful disposal. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dark energy constraints from galaxy cluster peculiar velocities

Future multifrequency microwave background experiments with arcminute resolution and micro-Kelvin temperature sensitivity will be able to detect the kinetic Sunyaev-Zeldovich effect, providing a way to measure radial peculiar velocities of massive galaxy clusters. We show that cluster peculiar velocities have the potential to constrain several dark energy parameters. We compare three velocity statistics (the distribution of radial velocities, the mean pairwise streaming velocity, and the velocity correlation function) and analyze the relative merits of these statistics in constraining dark energy parameters. Of the three statistics, mean pairwise streaming velocity provides constraints that are least sensitive to velocity errors: the constraints on parameters degrade only by a factor of 2 when the random error is increased from 100 to 500 km/s. We also compare cluster velocities with other dark energy probes proposed in the Dark Energy Task Force report. For cluster velocity measurements with realistic priors, the eventual constraints on the dark energy density, the dark energy equation of state and its evolution are comparable to constraints from supernovae measurements, and better than cluster counts and baryon acoustic oscillations; adding velocity to other dark energy probes improves constraints on the figure of merit by more than a factor of 2. For upcoming Sunyaev-Zeldovich galaxy cluster surveys, even velocity measurements with errors as large as 1000 km/s will substantially improve the cosmological constraints compared to using the cluster number density alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Synchrotron radiation from a runaway electron distribution in tokamaks

The synchrotron radiation emitted by runaway electrons in a fusion plasma provides information regarding the particle momenta and pitch-angles of the runaway electron population through the strong dependence of the synchrotron spectrum on these parameters. Information about the runaway density and its spatial distribution, as well as the time evolution of the above quantities, can also be deduced. In this paper, we present the synchrotron radiation spectra for typical avalanching runaway electron distributions. Spectra obtained for a distribution of electrons are compared with the emission of mono-energetic electrons with a prescribed pitch-angle. We also examine the effects of magnetic field curvature and analyse the sensitivity of the resulting spectrum to perturbations to the runaway distribution. The implications for the deduced runaway electron parameters are discussed. We compare our calculations to experimental data from DIII-D and estimate the maximum observed runaway energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Gold Standard: Accurate Stellar and Planetary Parameters for Eight Kepler M Dwarf Systems Enabled by Parallaxes

We report parallaxes and proper motions from the Hawaii Infrared Parallax Program for eight nearby M dwarf stars with transiting exoplanets discovered by Kepler. We combine our directly measured distances with mass–luminosity and radius–luminosity relationships to significantly improve constraints on the host stars’ properties. Our astrometry enables the identification of wide stellar companions to the planet hosts. Within our limited sample, all the multi-transiting planet hosts (three of three) appear to be single stars, while nearly all (four of five) of the systems with a single detected planet have wide stellar companions. By applying strict priors on average stellar density from our updated radius and mass in our transit fitting analysis, we measure the eccentricity probability distributions for each transiting planet. Planets in single-star systems tend to have smaller eccentricities than those in binaries, although this difference is not significant in our small sample. In the case of Kepler-42bcd, where the eccentricities are known to be ≃0, we demonstrate that such systems can serve as powerful tests of M dwarf evolutionary models by working in L{sub &lowast;}--ρ{sub &lowast;} space. The transit-fit density for Kepler-42bcd is inconsistent with model predictions at 2.1σ (22%), but matches more empirical estimates at 0.2σ (2%), consistent with earlier results showing model radii of M dwarfs are underinflated. Gaia will provide high-precision parallaxes for the entire Kepler M dwarf sample, and the Transiting Exoplanet Survey Satellite will identify more planets transiting nearby, late-type stars, enabling significant improvements in our understanding of the eccentricity distribution of small planets and the parameters of late-type dwarfs.

79 ASTRONOMY AND ASTROPHYSICS↗

An Integrated Approach to Parameter Learning in Infinite-Dimensional Space

The availability of sophisticated modern physics codes has greatly extended the ability of domain scientists to understand the processes underlying their observations of complicated processes, but it has also introduced the curse of dimensionality via the many user-set parameters available to tune. Many of these parameters are naturally expressed as functional data, such as initial temperature distributions, equations of state, and controls. Thus, when attempting to find parameters that match observed data, being able to navigate parameter-space becomes highly non-trivial, especially considering that accurate simulations can be expensive both in terms of time and money. Existing solutions include batch-parallel simulations, high-dimensional, derivative-free optimization, and expert guessing, all of which make some contribution to solving the problem but do not completely resolve the issue. In this work, we explore the possibility of coupling together all three of the techniques just described by designing user-guided, batch-parallel optimization schemes. Our motivating example is a neutron diffusion partial differential equation where the time-varying multiplication factor serves as the unknown control parameter to be learned. We find that a simple, batch-parallelizable, random-walk scheme is able to make some progress on the problem but does not by itself produce satisfactory results. After reducing the dimensionality of the problem using functional principal component analysis (fPCA), we are able to track the progress of the solver in a visually simple way as well as viewing the associated principle components. This allows a human to make reasonable guesses about which points in the state space the random walker should try next. Thus, by combining the random walker's ability to find descent directions with the human's understanding of the underlying physics, it is possible to use expensive simulations more efficiently and more quickly arrive at the desired parameter set.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of bimetallic architectures in nanometer-scale catalysts by combining molecular dynamics simulations with x-ray absorption spectroscopy

In this study, we present an approach for the determination of an atomic structure of small bimetallic nanoparticles by combining extended X-ray absorption fine structure spectroscopy and classical molecular dynamics simulations based on the Sutton-Chen potential. The proposed approach is illustrated in the example of PdAu nanoparticles with ca 100 atoms and narrow size and compositional distributions. Using a direct modeling approach and no adjustable parameters, we were able to reproduce the size and shape of nanoparticles as well as the intra-particle distributions of atoms and metal mixing ratios and to explore the influence of these parameters on the local structure and dynamics in nanoparticles.

74 ATOMIC AND MOLECULAR PHYSICS↗

The CU 2-D-MAX-DOAS instrument – Part 2: Raman scattering probability measurements and retrieval of aerosol optical properties

Abstract. The multiannual global mean of aerosol optical depth at 550 nm (AOD550) over land is ∼ 0.19, and that over oceans is ∼ 0.13. About 45 % of the Earth surface shows AOD550 smaller than 0.1. There is a need for measurement techniques that are optimized to measure aerosol optical properties under low AOD conditions. We present an inherently calibrated retrieval (i.e., no need for radiance calibration) to simultaneously measure AOD and the aerosol phase function parameter, g, based on measurements of azimuth distributions of the Raman scattering probability (RSP), the near-absolute rotational Raman scattering (RRS) intensity. We employ radiative transfer model simulations to show that for solar azimuth RSP measurements at solar elevation and solar zenith angle (SZA) smaller than 80°, RSP is insensitive to the vertical distribution of aerosols and maximally sensitive to changes in AOD and g under near-molecular scattering conditions. The University of Colorado two-dimensional Multi-AXis Differential Optical Absorption Spectroscopy (CU 2-D-MAX-DOAS) instrument was deployed as part of the Two Column Aerosol Project (TCAP) at Cape Cod, MA, during the summer of 2012 to measure direct sun spectra and RSP from scattered light spectra at solar relative azimuth angles (SRAAs) between 5 and 170°. During two case study days with (1) high aerosol load (17 July, 0.3 < AOD430 < 0.6) and (2) near-molecular scattering conditions (22 July, AOD430 < 0.13) we compare RSP-based retrievals of AOD430 and g with data from a co-located CIMEL sun photometer, Multi-Filter Rotating Shadowband Radiometer (MFRSR), and an airborne High Spectral Resolution Lidar (HSRL-2). The average difference (relative to DOAS) for AOD430 is +0.012 ± 0.023 (CIMEL), −0.012 ± 0.024 (MFRSR), −0.011 ± 0.014 (HSRL-2), and +0.023 ± 0.013 (CIMELAOD − MFRSRAOD) and yields the following expressions for correlations between different instruments: DOASAOD = −(0.019 ± 0.006) + (1.03 ± 0.02) × CIMELAOD (R2 = 0.98), DOASAOD = −(0.006 ± 0.005) + (1.08 ± 0.02) × MFRSRAOD (R2 = 0.98), and CIMELAOD = (0.013 ± 0.004) + (1.05 ± 0.01) × MFRSRAOD (R2 = 0.99). The average g measured by DOAS on both days was 0.66 ± 0.03, with a difference of 0.014 ± 0.05 compared to CIMEL. Active steps to minimize the error in the RSP help to reduce the uncertainty in retrievals of AOD and g. As AOD decreases and SZA increases, the RSP signal-to-noise ratio increases. At AOD430 ∼ 0.4 and 0.10 the absolute AOD errors are ∼ 0.014 and 0.003 at 70° SZA and 0.02 and 0.004 at 35° SZA. Inherently calibrated, precise AOD and g measurements are useful to better characterize the aerosol direct effect in urban polluted and remote pristine environments.

54 ENVIRONMENTAL SCIENCES↗