Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Distributed computation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Advanced Air Mobility (AAM) encompasses a broad vision for air transportation, including Urban Air Mobility (UAM) as a subset. AAM aims to create a more connected and efficient transportation network across various geographical settings. However, navigating AAM aircraft in GPS-denied or degraded environments during approach and landing is challenging. Traditional vision aids like glideslopes and localizers are limited in vertiport environments due to narrow beam constraints and reduced landing angle options. This paper addresses the need for accurate navigation solutions at vertiports by proposing a vision-based distributed sensing (VIDIS) system utilizing cameras with bundle adjustment to assist incoming AAM aircraft during approach and landing while monitoring surface movements to enhance safety and efficiency. Key focus areas for current and future vertiport developers include identifying suitable sensor types and infrastructure standards to support AAM operations and including vertiport markings as vision-based navigation aids. The proposed system offers a novel approach to overcoming navigation challenges in AAM operations, particularly in urban settings where traditional aids may be insufficient. Preliminary simulation results with distributed cameras demonstrate promising outcomes for implementing bundle adjustment techniques to enhance vision-based navigation solutions at vertiports. Generating waypoint-based trajectories via waypoint integration using explicit guidance synthesis (WINGS) creates smooth AAM trajectories for landing at vertiports by using the current waypoint's terminal conditions as the initial conditions for the next waypoint. Combining bundle adjustment's ground-based solution of vertiport features with WINGS, Coplanar Pose from Orthography and Scaling with Iterations (COPOSIT), and an extended Kalman filter (EKF) estimates the state of an incoming aircraft during approach and landing at vertiports. Future work includes testing VIDIS in a high-fidelity simulation and with real-world data.

Distributed sensing↗

Navier-Stokes Simulation of Airconditioning Facility of a Large Modem Computer Room

NASA recently assembled one of the world's fastest operational supercomputers to meet the agency's new high performance computing needs. This large-scale system, named Columbia, consists of 20 interconnected SGI Altix 512-processor systems, for a total of 10,240 Intel Itanium-2 processors. High-fidelity CFD simulations were performed for the NASA Advanced Supercomputing (NAS) computer room at Ames Research Center. The purpose of the simulations was to assess the adequacy of the existing air handling and conditioning system and make recommendations for changes in the design of the system if needed. The simulations were performed with NASA's OVERFLOW-2 CFD code which utilizes overset structured grids. A new set of boundary conditions were developed and added to the flow solver for modeling the roomls air-conditioning and proper cooling of the equipment. Boundary condition parameters for the flow solver are based on cooler CFM (flow rate) ratings and some reasonable assumptions of flow and heat transfer data for the floor and central processing units (CPU) . The geometry modeling from blue prints and grid generation were handled by the NASA Ames software package Chimera Grid Tools (CGT). This geometric model was developed as a CGT-scripted template, which can be easily modified to accommodate any changes in shape and size of the room, locations and dimensions of the CPU racks, disk racks, coolers, power distribution units, and mass-storage system. The compute nodes are grouped in pairs of racks with an aisle in the middle. High-speed connection cables connect the racks with overhead cable trays. The cool air from the cooling units is pumped into the computer room from a sub-floor through perforated floor tiles. The CPU cooling fans draw cool air from the floor tiles, which run along the outside length of each rack, and eject warm air into the center isle between the racks. This warm air is eventually drawn into the cooling units located near the walls of the room. One major concern is that the hot air ejected to the middle isle might recirculate back into the cool rack side and cause thermal short-cycling. The simulations analyzed and addressed the following important elements of the computer room: 1) High-temperature build-up in certain regions of the room; 2) Areas of low air circulation in the room; 3) Potential short-cycling of the computer rack cooling system; 4) Effectiveness of the perforated cooling floor tiles; 5) Effect of changes in various aspects of the cooling units. Detailed flow visualization is performed to show temperature distribution, air-flow streamlines and velocities in the computer room.

Source record↗

Uncertainties in obtaining high reliability from stress-strength models

There has been a recent interest in determining high statistical reliability in risk assessment of aircraft components. The potential consequences are identified of incorrectly assuming a particular statistical distribution for stress or strength data used in obtaining the high reliability values. The computation of the reliability is defined as the probability of the strength being greater than the stress over the range of stress values. This method is often referred to as the stress-strength model. A sensitivity analysis was performed involving a comparison of reliability results in order to evaluate the effects of assuming specific statistical distributions. Both known population distributions, and those that differed slightly from the known, were considered. Results showed substantial differences in reliability estimates even for almost nondetectable differences in the assumed distributions. These differences represent a potential problem in using the stress-strength model for high reliability computations, since in practice it is impossible to ever know the exact (population) distribution. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability. An alternative reliability computation procedure is examined involving determination of a lower bound on the reliability values using extreme value distributions. This procedure reduces the possibility of obtaining nonconservative reliability estimates. Results indicated the method can provide conservative bounds when computing high reliability.

Neal, Donald M.↗

Investigation of Some Wake Vortex Characteristics of an Inclined Ogive-Cylinder Body at Mach Number 2

For a body consisting of a fineness-ratio-3 ogival nose tangent to a cylindrical afterbody 7.3 diameters long, pitot-pressure distributions in the flow field, pressure distributions over the body, and downwash distributions along a line through the vortex centers have been measured for angles of attack to 20 degrees. The Reynolds numbers, based on body diameter, were 0.15 x 10 to the 6th power and 0.44 x 10 to the 6th power. Comparisons of computed and measured vortex paths and downwash distributions are made. (author)

Jorgensen, Leland H↗

The Velocity and Density Distribution of Earth-Intersecting Meteoroids: Implications for Environment Models

Meteoroids are known to damage spacecraft: they can crater or puncture components, disturb a spacecraft's attitude, and potentially create secondary electrical effects. Because the damage done depends on the speed, size, density, and direction of the impactor, accurate environment models are critical for mitigating meteoroid-related risks. Yet because meteoroid properties are derived from indirect observations such as meteors and impact craters, many characteristics of the meteoroid environment are uncertain. In this work, we present recent improvements to the meteoroid speed and density distributions. Our speed distribution is derived from observations made by the Canadian Meteor Orbit Radar. These observations are de-biased using modern descriptions of the ionization efficiency. Our approach yields a slower meteoroid population than previous analyses (see Fig. 1 for an example) and we compute the uncertainties associated with our derived distribution. We adopt a higher fidelity density distribution than that used by many older models. In our distribution, meteoroids with TJ less than 2 are assigned to a low-density population, while those with TJ greater than 2 have higher densities (see Fig. 2). This division and the distributions themselves are derived from the densities reported by Kikwaya et al. These changes have implications for the environment: for instance, the helion/antihelion sporadic sources have lower speeds than the apex and toroidal sources and originate from high-T(sub J) parent bodies. Our on-average slower and denser distributions thus imply that the helion and antihelion sources dominate the meteoroid environment even more completely than previously thought. Finally, for a given near-Earth meteoroid cratering rate, a slower meteoroid population produces a comparatively higher rate of satellite attitude disturbances.

Moorhead, A. V.↗

A tomographic technique for aerodynamics at transonic speeds

Computer aided tomography (CAT) provides a means of noninvasively measuring the air density distribution around an aerodynamic model. This technique is global in that a large portion of the flow field can be measured. A test of the applicability of CAT to transonic velocities was studied. A hemispherical-nose cylinder afterbody model was tested at a Mach number of 0.8 with a new laser holographic interferometer at the 2- by 2-Foot Transonic Wind Tunnel. Holograms of the flow field were taken and were reconstructed into interferograms. The fringe distribution (a measure of the local densities) was digitized for subsequent data reduction. A computer program based on the Fourier-transform technique was developed to convert the fringe distribution into three-dimensional densities around the model. Theoretical aerodynamic densities were calculated for evaluating and assessing the accuracy of the data obtained from the tomographic method.

Lee, G.↗

A tomographic technique for aerodynamics at transonic speeds

Computer aided tomography (CAT) provides a means of noninvasively measuring the air density distribution around an aerodynamic model. This technique is global in that a large portion of the flow field can be measured. A test of the applicability of CAT to transonic velocities was studied. A hemispherical-nose cylinder afterbody model was tested at a Mach number of 0.8 with a new laser holographic interferometer at the 2- by 2-Foot Transonic Wind Tunnel. Holograms of the flow field were taken and were reconstructed into interferograms. The fringe distribution (a measure of the local densities) was digitized for subsequent data reduction. A computer program based on the Fourier-transform technique was developed to convert the fringe distribution into three-dimensional densities around the model. Theoretical aerodynamic densities were calculated for evaluating and assessing the accuracy of the data obtained from the tomographic method.

Lee, G.↗

Helium and hydrogen in the lunar atmosphere

Of the gas species supplied by the solar wind, only helium and hydrogen are light enough to be lost from the moon by Jeans' thermal escape mechanism. To study the behavior of helium and hydrogen, a Monte Carlo technique has been used, in which random ballistic trajectories of individual molecules are traced over a spherical moon. In the computation, a particle is 'created' on the sunlit surface, and the locations of its subsequent encounters with the surface are recorded until it escapes. Global distributions of helium and hydrogen concentrations have been computed, based on the hypothesis that the release of neutral gases from the lunar surface is confined to daytime and is correlated with the solar wind influx. The resulting helium model is in good agreement with the measurements from the Apollo 17 lunar surface mass spectrometer.

Hodges, R. R., Jr.↗

A Numerical Analysis of Heat Transfer and Effectiveness on Film Cooled Turbine Blade Tip Models

A computational study has been performed to predict the distribution of convective heat transfer coefficient on a simulated blade tip with cooling holes. The purpose of the examination was to assess the ability of a three-dimensional Reynolds-averaged Navier-Stokes solver to predict the rate of tip heat transfer and the distribution of cooling effectiveness. To this end, the simulation of tip clearance flow with blowing of Kim and Metzger was used. The agreement of the computed effectiveness with the data was quite good. The agreement with the heat transfer coefficient was not as good but improved away from the cooling holes. Numerical flow visualization showed that the uniformity of wetting of the surface by the film cooling jet is helped by the reverse flow due to edge separation of the main flow.

Ameri, A. A.↗

Compliance and Functional Testing of IEEE 1451.1 for NCAP-to-NCAP Communications in a Sensor Network

Distributed control in a networked environment is an irreplaceable feature in systems with remote sensors and actuators. Although distributed control was not originally designed to be networked, usage of off-the-shelf networking technologies has become so prevalent that control systems are desired to have access mechanisms similar to computer networks. However, proprietary transducer interfaces for network communications and distributed control overwhelmingly dominate this industry. Unless the lack of compatibility and interoperability among transducers is resolved, the mature level of access (that computer networking can deliver) will not be achieved in such networked distributed control systems. Standardization of networked transducer interfaces will enable devices from different manufacturers to talk to each other and ensure their plug-and-play capability. One such standard is the suite of IEEE 1451 for sensor network communication and transducer interfaces. The suite not only provides a standard interface for smart transducers, but also outlines the connection of an NCAP (network capable application processor) and transducers (through a transducer interface module TIM). This paper presents the design of the compliance testing of IEEE 1451.1 (referred to as Dot1) compatible NCAP-to-NCAP communications on a link-layer independent medium. The paper also represents the first demonstration of NCAP-to-NCAP communications with Dot1 compatibility: a tester NCAP and an NCAP under test (NUT).

Figueroa, Jorge↗

A Tool for Automatic Data Distribution for CFD Applications on Structured Grids

Development of HPF versions of NPB and ARC3D has shown that HPF provides an efficient, concise way to express parallelism and to organize data traffic. The use of HPF, as noted in the papers, requires an intimate knowledge of the applications and a detailed analysis of data affinity, data movement, and data granularity. To simplify and accelerate the task of developing HPF versions of existing CFD applications we have designed and implemented ADAPT (Automatic Data Alignment and Placement Tool). ADAPT analyzes a CFD application working on a single structured grid and generates HPF TEMPLATE, (RE)DISTRIBUTION, ALIGNMENT, and INDEPENDENT directives. The directives can be generated on the nest level, subroutine level, application level, or on the application interface level. ADAPT annotates an existing CFD FORTRAN application, performing computations on single or multiple grids. On each grid the application is considered as a sequence of operators, each applied to a set of variables defined in a particular grid domain. ADAPT automatically detects implicit operators (i.e., having data dependences) and explicit operators (without data dependences). For parallelization of an explicit operator ADAPT creates a template for the operator domain, aligns arrays used in the operator with the template, distributes the template, and declares the loops over the distributed dimensions as INDEPENDENT. For parallelization of an implicit operator, the distribution of the operator's domain should be consistent with the operator's dependences. Any dependence between sections distributed on different processors would preclude parallelization if the compiler does not have an ability to pipeline computations. If a data distribution is "orthogonal" to the dependences of an implicit operator, then the loop which implements the operator can be declared as INDEPENDENT. ADAPT starts with an analysis of array index expressions of the loop nests. For each pair of arrays referenced in an assignment statement, it generates an arc in the alignment graph and annotates it with an affinity relation. The template, alignment, and distribution directives for a particular loop nest are then derived from a transitive closure of the affinity relation. A compromise of data distributions in different nests and subroutines is achieved by merging annotated alignment graphs for adjacent nests/stibroutine calls in the nest/call graph of the application in the process called distribution lifting. ADAPT has been implemented as a C++ program running in conjunction with a parallelization tool called CAPTools. ADAPT uses the parse tree, interprocedural analysis and application database generated by CAPTools. It also uses the Directed Graph class, initially implemented in p2d2 (parallel debugger oi distributed programs), and some other classes supporting symbolic computations. ADAPT uses data distribution techniques described. ADAPT was tested with ARC3D and the FT benchmark and has demonstrated a code performance within a factor of 1.5 of handwritten versions.

Frumkin, Michael↗

Concurrent file operations in a high performance FORTRAN

Distributed memory multiprocessor systems can provide the computing power necessary for large scale scientific applications. A critical performance issue for a number of these applications is the efficient transfer of data to secondary storage. Recently several research groups have proposed FORTRAN language extensions for exploiting the data parallelism of such scientific codes on distributed memory architectures. However, few of these high performance FORTRAN's provide appropriate constructs for controlling the use of the parallel I/O capabilities of modern multiprocessing machines. In this paper, we propose constructs to specify I/O operations for distributed data structures in the context of Vienna Fortran. These operations can be used by the programmer to provide information which can help the compiler and runtime environment make the most efficient use of the I/O subsystem.

Brezany, Peter↗

The investigation of tethered satellite system dynamics

The tether control law to retrieve the satellite was modified in order to have a smooth retrieval trajectory of the satellite that minimizes the thruster activation. The satellite thrusters were added to the rotational dynamics computer code and a preliminary control logic was implemented to simulate them during the retrieval maneuver. The high resolution computer code for modelling the three dimensional dynamics of untensioned tether, SLACK3, was made fully operative and a set of computer simulations of possible tether breakages was run. The distribution of the electric field around an electrodynamic tether in vacuo severed at some length from the shuttle was computed with a three dimensional electrodynamic computer code.

Lorenzini, E.↗

Transient radiative cooling of a droplet-filled layer

A proposed lightweight radiator system for waste heat dissipation in space would eject streams of coolant in the form of small, hot liquid droplets. The droplets would lose radiative energy by direct exposure to the very low-temperature environment of space, and would then be collected for reuse. The cooling behavior of a layer composed of many small droplets was studied by numerical solution of the radiative integral equations. Since there is mutual interference for radiative energy dissipation, an array droplet will cool more slowly than if each drop is exposed individually. Since liquid metal droplets may be used, the study includes results for conditions with high scattering. For optically thin regions, especially with high scattering, the temperature distribution is sufficiently uniform that the cooling can be computed using the approximation of a constant layer emittance. For optically thick layers starting at uniform temperature, the temperature distributions become nonuniform with time. It was found that the cooling process goes through a starting transient; a constant emittance condition is then achieved where the emittance is lower than that for a layer at uniform temperature.

Siegel, R.↗

Optimum element density studies for finite-element thermal analysis of hypersonic aircraft structures

Different finite element models previously set up for thermal analysis of the space shuttle orbiter structure are discussed and their shortcomings identified. Element density criteria are established for the finite element thermal modelings of space shuttle orbiter-type large, hypersonic aircraft structures. These criteria are based on rigorous studies on solution accuracies using different finite element models having different element densities set up for one cell of the orbiter wing. Also, a method for optimization of the transient thermal analysis computer central processing unit (CPU) time is discussed. Based on the newly established element density criteria, the orbiter wing midspan segment was modeled for the examination of thermal analysis solution accuracies and the extent of computation CPU time requirements. The results showed that the distributions of the structural temperatures and the thermal stresses obtained from this wing segment model were satisfactory and the computation CPU time was at the acceptable level. The studies offered the hope that modeling the large, hypersonic aircraft structures using high-density elements for transient thermal analysis is possible if a CPU optimization technique was used.

Ko, William L.↗

Electromagnetic Scattering by Discrete Random Media. IV: Coherent Backscattering

The problem of backscattering of light by a discrete random medium illuminated by an obliquely incident plane electromagnetic wave is considered.The analysis is performed in a linear-polarization basis and includes a complete derivation of the cross reflection matrix for a layer with densely and sparsely distributed particles, the design of an approximate method for computing the ladder and cross reflection matrices in the case of a semi-infinite medium with a sparse distribution of particles, the derivation of the relations between the elements of the ladder and cross reflection matrices in the exact backscattering direction for dense and sparse media, and the development of practical algorithms for solving the underlying integral equations by the method of Picard iterations and the discrete ordinate method. Simulation results for particles with large size parameters are also presented.

Adrian Doicu↗

Requirements for migration of NSSD code systems from LTSS to NLTSS

The purpose of this document is to address the requirements necessary for a successful conversion of the Nuclear Design (ND) application code systems to the NLTSS environment. The ND application code system community can be characterized as large-scale scientific computation carried out on supercomputers. NLTSS is a distributed operating system being developed at LLNL to replace the LTSS system currently in use. The implications of change are examined including a description of the computational environment and users in ND. The discussion then turns to requirements, first in a general way, followed by specific requirements, including a proposal for managing the transition.

Pratt, M.↗

Size distribution of interplanetary iron and stony particles related with deep-sea spherules

To study origin and evolution of the interplanetary dust, it is very important to investigate the size distribution. Here the changes of the size distributions of meteoroid particles due to the ablative effects during atmospheric entry were investigated by numerical computer simulation. Using the results, the pre-atmospheric size distributions of the interplanetary dust particles could be estimated from that of ablated spherules taken from deep-sea sediments. We are now analyzing deep-sea spherules from some aspects and examining if we could get any information about the interplanetary dust.

Matsuzaki, H.↗