Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dispersion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Comprehensive Phase Diagrams of MoS 2 Edge Sites Using Dispersion-Corrected DFT Free Energy Calculations

A comprehensive set of surface phase diagrams addressing the catalytically relevant edges of the (100) surface of MoS 2 catalysts is developed using dispersion-corrected density functional theory and ab initio thermodynamic modeling. The results of the temperature-dependent, free energy-based thermodynamic model are presented over the full range of catalytically relevant temperatures and pressures, in addition to S- and H-coverages ranging from 0 to 100%. The results of this work allow for a full thermodynamic analysis to be performed at the conditions relevant to any promising reaction involving MoS 2 , ranging from hydrodesulfurization to dehydrogenation to electrocatalysis. Several methodological recommendations are discussed and implemented with the goal of improving the accuracy of the surface phase diagrams at minimal computational expense. A library of the most stable S- and H-adsorption modes is also developed so that linear scaling relationships can be used to correlate thermodynamic stability with kinetic activity. Applying the results to C–H bond activation of methane with a S 2 oxidant, here we predict S-coverages near 100% on the Mo- and S-edges to be thermodynamically favored and S monomers on edge sites with high S-coverages to be kinetically favorable. For H-abstraction on surface S atoms, the Mo-edge is also predicted to be more active than the S-edge.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Photoexcited Electron Lifetimes Influenced by Momentum Dispersion in Silicon Nanowires

Silicon nanowires (SiNWs) exhibit unique optoelectronic properties originating from one-dimensional confinement effect. Technologically relevant properties—including band gap, radiative and nonradiative transitions, and charge carrier relaxation rates—are influenced by sampling of momentum along the growth direction. In this work, we quantify the influence of momentum dispersion on hot-electron relaxation rates and nonradiative lifetimes for SiNWs with ⟨100⟩ and ⟨111⟩ growth directions. Specifically, we account for nonradiative transitions between electronic states with different momentum, where changes in energy and momentum are achieved via interaction with a thermal bath of nuclear degrees of freedom. Photoexcited dynamic processes in reference SiNWs are computed via “on-the-fly” nonadiabatic couplings between electronic and nuclear degrees of freedom based on density functional theory (DFT). The dynamics of electronic degrees of freedom is propagated by a Redfield equation of motion for the reduced density matrix. Our results show that transitions allowing change of momentum prompt electron relaxation faster than those not allowing change of momentum. Our study also indicates that the electron relaxation time in ⟨100⟩ SiNW is longer than that in ⟨111⟩ SiNW.

Fatima, N/A↗
DOE OSTI2018

Experimental Phonon Dispersion and Lifetimes of Tetragonal CH 3 NH 3 PbI 3 Perovskite Crystals

Hybrid organic–inorganic perovskites were reported to have ultralow thermal conductivity in recent studies. In this Letter, we report the first experimental phonon dispersion and lifetimes of tetragonal CH 3 NH 3 PbI 3 single crystals at both 200 and 300 K by high-energy resolution inelastic X-ray scattering, which enables a thorough understanding of the underlying mechanisms for the ultralow thermal conductivity. Notably, we observed unusual and significant phonon dips along the [100] and [110] directions at both temperatures. The ultralow thermal conductivity can be attributed to small group velocities due to ultrasoft acoustic modes and short phonon lifetimes originating from the strong acoustic-optical coupling. We further provided the structural origins for these peculiar phonon features. Moreover, our results and interpretation are consistent with the reported temperature-dependent trend for thermal conductivity of CH 3 NH 3 PbI 3 . Lastly, our work offers critical guidelines for accelerating the design and discovery of novel hybrid materials for energy applications including photovoltaics and thermoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effect of Dispersion Medium Composition and Ionomer Concentration on the Microstructure and Rheology of Fe–N–C Platinum Group Metal-free Catalyst Inks for Polymer Electrolyte Membrane Fuel Cells

In this paper, we present an investigation of the microstructure and rheological behavior of catalyst inks consisting of Fe–N–C platinum group metal-free catalysts and a perfluorosulfonic acid ionomer in a dispersion medium (DM) of water and 1-propanol ( n PA). The effects of the ionomer-to-catalyst (I/C) ratio and weight percentage of water (H 2 O %) in the DM on the ink microstructure were studied. Steady-shear and dynamic-oscillatory-shear rheology, in combination with synchrotron X-ray scattering, was utilized to understand interparticle interactions and the level of agglomeration of the inks. In the absence of the ionomer, the inks were significantly agglomerated, approaching a gel-like microstructure for catalyst concentrations as low as 2 wt %. The effect of H 2 O % in the DM on particle agglomeration was found to vary with particle concentration. In concentrated inks (≥2 wt % catalyst), increasing H 2 O % was found to increase agglomeration because of the hydrophobic nature of the catalysts. In dilute inks (<1 wt % catalyst), the trend was reversed with increasing H 2 O %, suggesting that electrostatic interactions are dominating the behavior. In inks with 5 wt % catalyst, the addition of an ionomer was found to significantly stabilize the catalyst against agglomeration. Maximum stability was observed at 0.35 I/C for all DM H 2 O % studied. At high ionomer concentrations (I/C > 0.35), interesting differences were observed between n PA-rich inks (H 2 O % ≤ 50%) and H 2 O-rich (82% H 2 O) inks. The n PA-rich inks remained predominantly stable—ink viscosity only weakly increased with I/C and the Newtonian behavior was maintained for I/C up to 0.9. In contrast, the H 2 O-rich inks exhibited a significant increase in viscoelasticity with increasing I/C, suggesting flocculation of the catalyst by the ionomer. These differences suggest that the nature of the interactions between the ionomer and catalyst is highly dependent on the H 2 O % in the DM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Probing High-Pressure Structural Evolution in Polyurea with In Situ Energy-Dispersive X-ray Diffraction and Molecular Dynamics Simulations

Polyurea, an elastomer with a phase-segregated microstructure, has been proven as an effective coating in defense applications. To gain a more complete understanding of the high-pressure atomic-level morphology of these phases and to validate molecular dynamics (MD) simulations, multi-angle energy-dispersive X-ray diffraction experiments were performed in situ up to pressures of ~6 GPa at room temperature. Structure factors were obtained and compared to MD simulations with an average error of less than 5% between major peak positions. The first sharp diffraction peak shifted from 4.56 Å to lower d-spacing with pressure, indicating compression between hard segments. This was further supported by the behavior of a peak at ~3.86 Å from the pair distribution function (PDF), suspected to represent π-stacking and separation between soft segments. Compression within the hard segments themselves is minimal as low-r peaks in the PDF are not greatly affected by pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Evolution of Ionomer Morphology from Dispersion to Film: An in Situ X-ray Study

Ion-conducting polymers (ionomers) have been extensively studied in solution, as membranes and substrate-supported thin films for various electrochemical energy-conversion devices, including fuel cells and electrolyzers. Formation of an ionomer film from a solution, however, is not well understood, despite its importance for fabrication of electrodes in energy devices. Here, the evolution of the perfluorinated sulfonic acid morphology upon casting from a solution is observed using in situ grazing-incidence small- and wide-angle X-ray scattering. Aggregate interactions in dispersion directly impact the hydrophilic-domain network of the cast film and the onset of crystallization occurs simultaneously with the solution-to-film transition but continues to evolve on different time scales. In addition, confinement is shown to induce anisotropic morphology at multiple length scales. These results show promise for elucidating the role of casting parameters, drying protocols, and ionomer-solvent interactions in governing film morphology and open new avenues for establishing structure/processing/property relationships for ionomer films and modifying their transport functionality at catalytic interfaces.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Quantifying Atomically Dispersed Catalysts Using Deep Learning Assisted Microscopy

The catalytic performance of atomically dispersed catalysts (ADCs) is greatly influenced by their atomic configurations, such as atom–atom distances, clustering of atoms into dimers and trimers, and their distributions. Scanning transmission electron microscopy (STEM) is a powerful technique for imaging ADCs at the atomic scale; however, most STEM analyses of ADCs thus far have relied on human labeling, making it difficult to analyze large data sets. Here, we introduce a convolutional neural network (CNN)-based algorithm capable of quantifying the spatial arrangement of different adatom configurations. The algorithm was tested on different ADCs with varying support crystallinity and homogeneity. Results show that our algorithm can accurately identify atom positions and effectively analyze large data sets. Here, this work provides a robust method to overcome a major bottleneck in STEM analysis for ADC catalyst research. We highlight the potential of this method to serve as an on-the-fly analysis tool for catalysts in future in situ microscopy experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Spontaneous Formation of 1D Pattern in Monolayer VSe 2 with Dispersive Adsorption of Pt Atoms for HER Catalysis

Creation of functional patterns in two-dimensional (2D) materials provides opportunities to extend their potential for applications. Transition-metal dichalcogenides (TMDCs) are suitable 2D materials for pattern generation because of properties including alterable polymorphic phases, easy chalcogen-vacancy formation, metal-atom insertion, and alloying. Such patterning can be used for selective functionalization. Here we report the spontaneous formation of long-range, well-ordered 1D patterns in monolayer vanadium diselenide (VSe 2 ) by a single annealing stage during growth. Atomic-resolution images in real space combined with density-functional-theory (DFT) calculations reveal the 1D features of patterned VSe 2 . Further experimental characterization of the intermediate states in the growth process confirm the spontaneous formation of the 1D pattern by annealing-induced Se-deficient linear defects. The 1D pattern can be reversibly transformed to homogenous VSe 2 monolayer by reintroducing Se atoms. Moreover, additional experiments demonstrate that a dispersive deposition of Pt atoms along the 1D structures of patterned VSe 2 is achieved, while DFT calculations find that their catalytic activity for hydrogen evolution reaction (HER) is as good as that of Pt surfaces. Further, the formation of long-range, well-ordered 1D patterns not only demonstrates an effective way of dimension modulation in 2D materials but also enriches the potential of intrinsically patterned 2D materials for promising catalytic activities.

Chemical structure↗
DOE OSTI2018

Atomically Dispersed Co and Cu on N-Doped Carbon for Reactions Involving C–H Activation

Atomically dispersed Co(II) cations coordinated to nitrogen in a carbon matrix (Co-N-C) catalyze oxidative dehydrogenation of benzyl alcohol in water with a specific activity approaching that of supported Pt nanoparticles. Whereas Cu(II) cations in N-doped carbon also catalyze the reaction, they are about an order of magnitude less active compared with Co(II) cations. Results from X-ray absorption spectroscopy suggest that oxygen is also bound to N-coordinated Co(II) sites but that it can be partially removed by H 2 treatments at 523–750 K. The N-coordinated Co(II) sites remained cationic in H 2 up to 750 K, and these stable sites were demonstrated to be active for propane dehydrogenation. In situ characterization of Cu(II) in N-doped carbon revealed that reduction of the metal in H 2 started at about 473 K, indicating a much lower thermal stability of Cu(II) in H 2 relative to Co(II). The demonstrated high catalytic activity and thermal stability of Co-N-C in reducing environments suggests that this material may have broad utility in a variety of catalytic transformations.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Phthalocyanine Precursors To Construct Atomically Dispersed Iron Electrocatalysts

Carbon materials embedded with atomically dispersed metal sites have recently demonstrated intriguing performance as electrocatalysts. However, it remains challenging to construct abundant single metal atoms due to easy aggregation of metal species during the high-temperature synthesis. In this work, a facile method is developed to construct single iron atom electrocatalysts with high iron content by employing iron phthalocyanine (FePc) derivatives as metal precursors. FePc molecules are encapsulated into the zeolitic imidazolate frameworks (ZIFs), and the subsequent pyrolysis yields the catalysts. Cyano substitution on FePc (FePc(CN) 8 ) can facilitate introduction of phthalocyanine molecules and formation of active sites, thus affording higher activity for the oxygen reduction reaction than the FePc counterpart. It is also found that adding iron salt with FePc(CN) 8 can afford a better catalyst with enhanced surface Fe–N x content, which exhibits high activities with a half-wave potential of 0.910 and 0.811 V versus reversible hydrogen electrode in alkaline and acidic conditions, respectively. Moreover, FePc(CN) 8 /ZIF-derived catalyst exhibits high selectivities and good activities for carbon monoxide production in the carbon dioxide reduction reaction (CO 2 RR). The bulk Fe–N x sites are found to be more stable than the surface Fe–N x sites possibly due to the improved desorption of carbon monoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Focused Ion Beam-Scanning Transmission Electron Microscopy with Energy-Dispersive X-ray Spectroscopy Study on Technetium Incorporation within Iron Oxides through Fe(OH) 2 (s) Mineral Transformation

Incorporation of Tc(IV) into iron oxide/hydroxide minerals has been explored and proposed as a promising pathway to preventing Tc(IV) reoxidation to environmentally mobile pertechnetate (TcO 4 - ) and improving long-term immobilization of radioactive technetium-99 (Tc). However, visual evidence evaluating the distribution of Tc(IV) incorporated within iron oxide/hydroxide phases has not been available, until now, despite potential implications on Tc(IV) stability within the host phase. For the purpose of this study Tc(IV) incorporation into iron oxide/hydroxide phases was facilitated via Fe(OH) 2 (s) oxidation and mineral transformation to magnetite (Fe 3 O 4 ). Focused ion beam - scanning transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy (FIB/STEM-EDS) methods were then combined with X-ray diffraction and absorption spectroscopy techniques to characterize and visually demonstrate that, for the first time, Tc(IV) is heterogeneously incorporated into different iron oxide/hydroxide phases as Tc(IV)-incorporated magnetite and/or TcO 2 ·2H 2 O(s) via different incorporation mechanisms. Heterogeneous distribution of Tc(IV) in magnetite suggests either (i) TcO4- is reduced quickly at the magnetite surface and then encapsulated into magnetite during continued octahedral crystal growth, or (ii) Tc(IV) alternatively partitioned into multiple layers of a blocky, plate-like morphological magnetite structure showing stratified Tc. With limited Tc-hematite (Fe 2 O 3 ) incorporation, the results suggest that TcO 2 ·2H 2 O(s) is formed and mainly associated/embedded in fibrous nanometer-sized polycrystalline hematite. This work highlights the power of modern state-of-the-art FIB/STEM-EDS approach to provide essential visual insights of the Tc-iron oxide/hydroxide incorporation and generate reliable mechanism-informed designs for waste forms relying on Tc mineral incorporation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Performance Enhancement of Lead-Free Tin-Based Perovskite Solar Cells with Reducing Atmosphere-Assisted Dispersible Additive

Sn-based halide perovskite materials have attracted tremendous attention and have been employed successfully in solar cells. However, their high conductivities resulting from the unstable divalent Sn state in the structure cause poor device performance and poor reproducibility. Herein, we used excess tin iodide (SnI 2 ) in Sn-based halide perovskite solar cells (ASnI 3 , A = Cs, methylammonium and formamidinium tin iodide as the representative light absorbers), combined with a reducing atmosphere to stabilize the Sn 2+ state. Excess SnI 2 can disperse uniformly into the perovskite films and functions as a compensator as well as a suppressor of Sn 2+ vacancies thereby effectively reducing the p-type conductivity. This process significantly improved the solar-cell performances of all the ASnI3 materials on mesoporous TiO 2 . Optimized CsSnI3 devices achieved a maximum power conversion efficiency of 4.81%, which is the highest among all inorganic Pb-free perovskite solar cells to date.

14 SOLAR ENERGY↗
DOE OSTI2020

Atomically Dispersed Iron–Nitrogen Sites on Hierarchically Mesoporous Carbon Nanotube and Graphene Nanoribbon Networks for CO 2 Reduction

Atomically dispersed metal and nitrogen co-doped carbon (M-N/C) catalysts hold great promise for electrochemical CO 2 conversion. However, there is a lack of cost-effective synthesis approaches to meet the goal of economic mass production of single-atom M-N/C with desirable carbon support architecture for efficient CO 2 reduction. Herein, we report facile transformation of commercial carbon nanotube (CNT) into isolated Fe-N 4 sites anchored on carbon nanotube and graphene nanoribbon (GNR) networks (Fe-N/CNT@GNR). The oxidization-induced partial unzipping of CNT results in the generation of GNR nanolayers attached to the remaining fibrous CNT frameworks, which reticulates a hierarchically mesoporous complex and thus enables a high electrochemical active surface area and smooth mass transport. The Fe residues originating from CNT growth seeds serve as Fe sources to form isolated Fe-N-4 moieties located at the CNT and GNR basal plane and edges with high intrinsic capability of activating CO 2 and suppressing hydrogen evolution. The Fe-N/CNT@GNR delivers a stable CO Faradaic efficiency of 96% with a partial current density of 22.6 mA cm -2 at a low overpotential of 650 mV, making it one of the most active M-N/C catalysts reported. This work presents an effective strategy to fabricate advanced atomistic catalysts and highlights the key roles of support architecture in single-atom electrocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Molecular Catalyst Synthesis Strategies to Prepare Atomically Dispersed Fe-N-C Heterogeneous Catalysts

We report a strategy to integrate atomically dispersed iron within a heterogeneous nitrogen-doped carbon (N-C) support, inspired by routes for metalation of molecular macrocyclic iron complexes. The N-C support, derived from pyrolysis of a ZIF-8 metal–organic framework, is metalated via solution-phase reaction with FeCl 2 and tributyl amine, as a Brønsted base, at 150 °C. Fe active sites are characterized by 57 Fe Mössbauer spectroscopy and aberration-corrected scanning transmission electron microscopy. The site density can be increased by selective removal of Zn 2+ ions from the N-C support prior to metalation, resembling the transmetalation strategy commonly employed for the preparation of molecular Fe-macrocycles. As a result, the utility of this approach is validated by the higher catalytic rates (per total Fe) of these materials relative to established Fe-N-C catalysts, benchmarked using an aerobic oxidation reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cooperative Atomically Dispersed Fe–N 4 and Sn–N x Moieties for Durable and More Active Oxygen Electroreduction in Fuel Cells

One grand challenge for deploying porous carbons with embedded metal–nitrogen–carbon (M–N–C) moieties as platinum group metal (PGM)-free electrocatalysts in proton-exchange membrane fuel cells is their fast degradation and inferior activity. Here, we report the modulation of the local environment at Fe–N 4 sites via the application of atomic Sn–N x sites for simultaneously improved durability and activity. We discovered that Sn–N x sites not only promote the formation of the more stable D2 FeN 4 C 10 sites but also invoke a unique D3 SnN x –Fe II N 4 site that is characterized by having atomically dispersed bridged Sn–N x and Fe–N 4 . This new D3 site exhibits significantly improved stability against demetalation and several times higher turnover frequency for the oxygen reduction reaction (ORR) due to the shift of the reaction pathway from a single-site associative mechanism to a dual-site dissociative mechanism with the adjacent Sn site facilitating a lower overpotential cleavage of the O–O bond. This mechanism bypasses the formation of the otherwise inevitable intermediate that is responsible for demetalation, where two hydroxyl intermediates bind to one Fe site. Lastly, a mesoporous Fe/Sn-PNC catalyst exhibits a positively shifted ORR half-wave potential and more than 50% lower peroxide formation. This, in combination with the stable D3 site and enriched D2 Fe sites, significantly enhanced the catalyst’s durability as demonstrated in membrane electrode assemblies using complementary accelerated durability testing protocols.

36 MATERIALS SCIENCE↗
DOE OSTI2017

In Situ Synthesis of Highly Dispersed and Ultrafine Metal Nanoparticles from Chalcogels

We report a unique reaction type for facile synthesis of ultrafine and well-dispersed Pt nanoparticles supported on chalcogel surfaces. The nanoparticles are obtained by in-situ Pt 2+ reduction of a chalcogel network formed by the metathesis reaction between K 2 PtCl 4 and Na 4 SnS 4 . The rapid catalytic ability of the chalcogelsupported Pt nanoparticles is demonstrated in a recyclable manner by using 4-nitrophenol reduction as a probe reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Low-Temperature Non-Oxidative Coupling of Methane on Atomically Dispersed Titanium–Aluminum–Boron Nanopowder

Nonoxidative coupling of methane represents a long-standing challenge in heterogeneous catalysis, as it requires activation of the carbon–hydrogen (C–H) bond, controlled carbon–carbon (C–C) bond formation, and effective hydrogen management without relying on oxidants. Here, we report a low-temperature C–H activation and nonoxidative C–C coupling of methane over atomically dispersed titanium–aluminum–boron nanopowder (Ti–Al–B NP) utilizing a catalytic microreactor coupled to synchrotron single-photon photoionization reflectron time-of-flight mass spectrometry. The soft-ionization, in situ probing method detects the nascent reaction products and radical intermediates under operando conditions, including methyl radical, C2 hydrocarbons, and molecular hydrogen. Methane activation is initiated at 800 K, approximately 700 K below the gas-phase decomposition threshold, leading predominantly to ethylene formation with selectivity reaching up to 78% among the C–C coupled products. Electronic structure calculations on model Ti–Al–B clusters elucidate a cooperative catalytic mechanism in which titanium enables methane adsorption and C–H activation, boron acts as a reversible hydrogen reservoir, and aluminum stabilizes methylene intermediates, thereby facilitating selective C–C coupling and dehydrogenation. These findings establish a distinct catalyst architecture for nonoxidative methane coupling based on earth abundant elements alternative to expensive platinum and other noble metal-containing conventional catalysts and provide molecular-level design principles for controlling dehydrogenation and subsequent C–C bond formation in challenging light alkane conversions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Cooperative Roles of Charge Transfer and Dispersion Terms in Hydrogen-Bonded Networks of (H2O)n, n = 6, 11, and 16

The perturbation expansion based on the locally-projected molecular orbital (LPMO PT) was applied to the study of the hydrogenbonded networks of water clusters with up to 16 molecules. Utilizing the local nature of the occupied and excited MOs on each monomer, the chargetransfer and dispersion terms are evaluated for every pair of molecules. The two terms are strongly correlated with each other for the hydrogen-bonded pairs. The strength of the hydrogen bonds in the clusters is further classified by the types of the hydrogen donor and acceptor water molecules. The relative energies evaluated with th LPMO PT among the isomers of (H2O)6, (H2O)11, and (H2O)16 agree very well with those obtained from CCSD(T) calculations with large basis sets. The binding energy of the LPMO PT is approximately free of the basis set superposition errors caused both by the orbital basis inconsistency and by the configuration basis inconsistency.

Iwata, Suehiro↗