Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Effects of truncation of a predominantly compression load spectrum on the life of a notched graphite/epoxy laminate

The fatigue behavior of a notched, graphite/epoxy (T300/5208) laminate subjected to predominantly compressive loading was explored in a series of constant-amplitude and transport wing spectrum tests. Results of these tests indicate that (1) the amount of local (near the notch) buckling allowed in the tests significantly affected fatigue life; (2) spectrum truncation of either the high- or low-load end of the spectrum produced lives greater than those obtained in the baseline, complete-spectrum test, but life was much more sensitive to truncations at the high-load end; and (3) the Palmgren-Miner linear cumulative damage theory always predicted lives much longer than the actual spectrum loading test lives.

Phillips, E. P.↗

A split finite element algorithm for the compressible Navier-Stokes equations

An accurate and efficient numerical solution algorithm is established for solution of the high Reynolds number limit of the Navier-Stokes equations governing the multidimensional flow of a compressible essentially inviscid fluid. Finite element interpolation theory is used within a dissipative formulation established using Galerkin criteria within the Method of Weighted Residuals. An implicit iterative solution algorithm is developed, employing tensor product bases within a fractional steps integration procedure, that significantly enhances solution economy concurrent with sharply reduced computer hardware demands. The algorithm is evaluated for resolution of steep field gradients and coarse grid accuracy using both linear and quadratic tensor product interpolation bases. Numerical solutions for linear and nonlinear, one, two and three dimensional examples confirm and extend the linearized theoretical analyses, and results are compared to competitive finite difference derived algorithms.

Baker, A. J.↗

Effects of low-velocity impact on Gr/Pi compression laminates

The results of low velocity impact tests conducted on a graphite-polyimide laminate are presented. The 48-ply orthotropic laminate tested during this investigation is typical of laminates being proposed for heavily loaded aircraft wing skins. The nature of the damage is described as well as the effect of that damage on the compression strength of the 48-ply orthotropic laminate. The results obtained for the graphite-polyimide laminate are compared to existing results of similar tests conducted on other graphite-epoxy laminates.

Garcia, R.↗

A compressible solution of the Navier-Stokes equations for turbulent flow about an airfoil

A compressible time dependent solution of the Navier-Stokes equations including a transition turbulence model is obtained for the isolated airfoil flow field problem. The equations are solved by a consistently split linearized block implicit scheme. A nonorthogonal body-fitted coordinate system is used which has maximum resolution near the airfoil surface and in the region of the airfoil leading edge. The transition turbulence model is based upon the turbulence kinetic energy equation and predicts regions of laminar, transitional, and turbulent flow. Mean flow field and turbulence field results are presented for an NACA 0012 airfoil at zero and nonzero incidence angles of Reynolds number up to one million and low subsonic Mach numbers.

Shamroth, S. J.↗

Compression of Jupiter's magnetosphere by the solar wind

Simultaneous sets of interplanetary and planetary data obtained by Pioneer 10 and Pioneer 11 are compared with a view toward identifying major changes in the solar wind and their possible influence on the Jovian magnetosphere. The results are discussed relative to variations in magnetopause location, pressure balance at the magnetopause, acceleration of energetic trapped radiation, plasma density from the response time of the Jovian magnetosphere, and time constants of magnetospheric circuit models. A major finding is that three out of four cases in which the Pioneers reentered the magnetosheath are the result of time variations associated with changing interplanetary conditions. The compressibility of the Jovian magnetosphere is enhanced because the field inside the magnetopause is not the planetary field but is primarily caused by currents inside the magnetosphere, presumably the equatorial current sheet.

Smith, E. J.↗

A similarity rule for compressibility and sidewall-boundary-layer effects in two-dimensional wind tunnels

The effect of the sidewall boundary layer on flow in two-dimensional wind tunnels is determined. The small-disturbance and isentropic approximations are made, and the sidewall-boundary-layer dynamics are modeled with the von Karman momentum-integral equation. The effects of the edge-velocity-gradient term in the sidewall momentum integral, which is usually dominant near the model, and the compressibility term are shown to be similar. It is shown that the effect of sidewall suction around the model is not similar to two-dimensional flow. Comparisons with experiment are made to verify the similarity rule.

Barnwell, R. W.↗

Effect of impact damage on the compression strength of filamentary-composite hat-stiffened panels

An experimental investigation was conducted to evaluate the effect of low-velocity impact damage on the compression strength of filamentary-composite hat-stiffened panels. Twenty-four specimens of three design configurations fabricated from graphite-epoxy and boron-epoxy materials were tested. All three design configurations met the design buckling requirements in the undamaged condition. The impact damage was caused by firing aluminum spheres at the panels to simulate impact on aircraft from runway stones. Panels were damaged by impact in the hat cap or in the skin beneath the hat cap (regions of high axial stiffness) and in the skin between stiffeners (region of low axial stiffness). The panels were relatively insensitive to impact damage in the regions of low axial stiffness but were very sensitive to impact damage in the regions of high axial stiffness. Test results suggest that impact damage may be more dependent on the matrix properties than on the fiber properties of the composite materials considered.

Rhodes, M. D.↗

Simulation of three-dimensional compressible viscous flow on the Illiac IV computer

Complicated three-dimensional viscous transonic flows about bodies at high angles of attack are solved on the Illiac IV computer. It is shown that certain approximate forms of the compressible Reynolds-averaged Navier-Stokes equations can be computed about realistic three-dimensional geometries with relative ease on the Illiac IV. The ease and efficiency with which this can be done depend on the approximations made in the basic equations, the choice of the numerical algorithm used for the solution, and the data-base system that controls the data management and identifies and manipulates the vectors. A pencil data-base system is found to be particularly suitable for the approximations and numerical method chosen to produce the results presented. In addition, some comparisons are made of computer predictions with experimental results for various lows about hemisphere-cylinders in both subsonic and supersonic free streams. The same viscous model and numerical model are used, showing good qualitative agreement in the location of separation lines and pressure distributions.

Pulliam, T. H.↗

Numerical solution of compressible viscous flows

The presented review is concerned with the problem of calculating compressible viscous flows. Basic numerical considerations and problems associated with calculating viscous flows are examined and current numerical approaches toward the solution of the Navier-Stokes equations are discussed. It is pointed out that the numerical solution of the full time-dependent equations for turbulent flow is not practical with present computers. Therefore, turbulence effects must be accounted for by modeling. Developments related to turbulence modeling are described. In connection with a discussion of numerical methods for solving viscous flow equations, attention is given to numerical domains of dependence of typical explicit and implicit methods, the diffusion problem, the convection-diffusion problem, and the split-hybrid method.

Maccormack, R. W.↗

Crack extension from flaws in a brittle material subjected to compression

The mechanisms by which cracks extend from flaws in brittle materials subjected to compressive loads are presented. Although it is recognized that most geological materials are neither dense nor single-phase, this experimental study and analysis are restricted to single-phase, dense materials in order to provide a model amenable to analysis and experimental confirmation. The flaws which occur in dense, single-phase materials are divided into three types, each type having different characteristics of crack extension. Experimental studies of crack extension from flaws introduced into blocks of polymethylmethacrylate plastic are described. The studies show that crack extension from three dimensional flaws is more complex than two-dimensional theories predict. The extension of secondary cracks may result in more damage than that which would be predicted by considering only the primary crack extension treated by current theories. The importance of the dynamic behavior of flaws which stick and then suddenly slip is shown.

Adams, M.↗

Turbulent shear stresses in compressible boundary layers

Hot-wire anemometer measurements of turbulent shear stresses in a Mach 3 compressible boundary layer were performed in order to investigate the effects of heat transfer on turbulence. Measurements were obtained by an x-probe in a flat plate, zero pressure gradient, two dimensional boundary layer in a wind tunnel with wall to freestream temperature ratios of 0.94 and 0.71. The measured shear stress distributions are found to be in good agreement with previous results, supporting the contention that the shear stress distribution is essentially independent of Mach number and heat transfer for Mach numbers from incompressible to hypersonic and wall to freestream temperature ratios of 0.4 to 1.0. It is also found that corrections for frequency response limitations of the electronic equipment are necessary to determine the correct shear stress distribution, particularly at the walls.

Laderman, A. J.↗

An implicit factored scheme for the compressible Navier-Stokes equations. II - The numerical ODE connection

An attempt is made to establish a connection between linear multistep methods for applications to ordinary differential equations and their extension (by approximate factorization) to alternating direction implicit methods for partial differential equations. An earlier implicit factored scheme for the compressible Navier-Stokes equations is generalized by innovations that (1) increase the class of temporal difference schemes to include all linear multistep methods, (2) optimize the class of unconditionally stable factored schemes by a new choice of unknown variable, and (3) improve the computational efficiency by the introduction of quasi-one-leg methods.

Beam, R. M.↗

Compression of the Hermaean magnetosphere by the solar wind

The decrease of the volume of the dayside Hermaean magnetosphere with an increase in solar wind pressure is investigated, taking into account the effects of a conducting planetary core. A two-layer conductivity model is used to simulate the metallic core and outer silicate mantle of Mercury, and the magnetic field of the magnetosphere is modelled by a pure planet-centered axial dipole, the magnetopause current system by a pure axial dipole on the Mercury-sun line and the tail field by a semiinfinite current sheet. Results confirm the compression of the magnetic field and the increase in magnetic field pressures under most increased solar wind pressures in the presence of a planetary core, allowing a direct impact of the solar wind on the Hermaean surface to occur only 0.2% of the time.

Suess, S. T.↗

Optimum design of laminated plates under axial compression

The paper presents a method for designing laminated plates with orthotropic layers under uniaxial and biaxial compression. The objective is to find the fiber direction of all the layers that give the highest buckling stress; therefore, it is necessary to solve an unconstrained maximization problem. The optimization technique used is Powell's conjugate direction method. Numerical calculations were made for plates with three, four, and six layers.

Hirano, Y.↗

Application of a trigonometric finite difference procedure to numerical analysis of compressive and shear buckling of orthotropic panels

A numerical analysis developed for the buckling of rectangular orthotropic layered panels under combined shear and compression is described. This analysis uses a central finite difference procedure based on trigonometric functions instead of using the conventional finite differences which are based on polynomial functions. Inasmuch as the buckle mode shape is usually trigonometric in nature, the analysis using trigonometric finite differences can be made to exhibit a much faster convergence rate than that using conventional differences. Also, the trigonometric finite difference procedure leads to difference equations having the same form as conventional finite differences; thereby allowing available conventional finite difference formulations to be converted readily to trigonometric form. For two-dimensional problems, the procedure introduces two numerical parameters into the analysis. Engineering approaches for the selection of these parameters are presented and the analysis procedure is demonstrated by application to several isotropic and orthotropic panel buckling problems. Among these problems is the shear buckling of stiffened isotropic and filamentary composite panels in which the stiffener is broken. Results indicate that a break may degrade the effect of the stiffener to the extent that the panel will not carry much more load than if the stiffener were absent.

Stein, M.↗

Basic cluster compression algorithm

Feature extraction and data compression of LANDSAT data is accomplished by BCCA program which reduces costs associated with transmitting, storing, distributing, and interpreting multispectral image data. Algorithm uses spatially local clustering to extract features from image data to describe spectral characteristics of data set. Approach requires only simple repetitive computations, and parallel processing can be used for very high data rates. Program is written in FORTRAN IV for batch execution and has been implemented on SEL 32/55.

Hilbert, E. E.↗

Compressing TV-image data

Compressing technique calculates activity estimator for each segment of image line. Estimator is used in conjunction with allowable bits per line, N, to determine number of bits necessary to code each segment and which segments can tolerate truncation. Preprocessed line data are then passed to adaptive variable-length coder, which selects optimum transmission code. Method increases capacity of broadcast and cable television transmissions and helps reduce size of storage medium for video and digital audio recordings.

Hilbert, E. E.↗

Preprototype vapor compression distillation subsystem

A three-person capacity preprototype vapor compression distillation subsystem for recovering potable water from wastewater aboard spacecraft was designed, assembled, and tested. The major components of the subsystem are: (1) a distillation unit which includes a compressor, centrifuge, central shaft, and outer shell; (2) a purge pump; (3) a liquids pump; (4) a post-treat cartridge; (5) a recycle/filter tank; (6) an evaporator high liquid level sensor; and (7) the product water conductivity monitor. A computer based control monitor instrumentation carries out operating mode change sequences, monitors and displays subsystem parameters, maintains intramode controls, and stores and displays fault detection information. The mechanical hardware occupies 0.467 m3, requires 171 W of electrical power, and has a dry weight of 143 kg. The subsystem recovers potable water at a rate of 1.59 kg/hr, which is equivalent to a duty cycle of approximately 30% for a crew of three. The product water has no foul taste or odor. Continued development of the subsystem is recommended for reclaiming water for human consumption as well as for flash evaporator heat rejection, urinal flushing, washing, and other on-board water requirements.

Ellis, G. S.↗