Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Color”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Galaxy Interactions in Filaments and Sheets: Effects of the Large-scale Structures Versus the Local Density

Abstract Major interactions are known to trigger star formation in galaxies and alter their color. We study the major interactions in filaments and sheets using SDSS data to understand the influence of large-scale environments on galaxy interactions. We identify the galaxies in filaments and sheets using the local dimension and also find the major pairs residing in these environments. The star formation rate (SFR) and color of the interacting galaxies as a function of pair separation are separately analyzed in filaments and sheets. The analysis is repeated for three volume limited samples covering different magnitude ranges. The major pairs residing in the filaments show a significantly higher SFR and bluer color than those residing in the sheets up to the projected pair separation of ∼50 kpc. We observe a complete reversal of this behavior for both the SFR and color of the galaxy pairs having a projected separation larger than 50 kpc. Some earlier studies report that the galaxy pairs align with the filament axis. Such alignment inside filaments indicates anisotropic accretion that may cause these differences. We do not observe these trends in the brighter galaxy samples. The pairs in filaments and sheets from the brighter galaxy samples trace relatively denser regions in these environments. The absence of these trends in the brighter samples may be explained by the dominant effect of the local density over the effects of the large-scale environment.

Astronomy & Astrophysics↗
DOE OSTI2021

Electrical Tuning of Tin-Vacancy Centers in Diamond

Group-IV color centers in diamond have attracted significant attention as solid-state spin qubits because of their excellent optical and spin properties. Among these color centers, the tin-vacancy (Sn-V - ) center is of particular interest because its large ground-state splitting enables long spin coherence times at temperatures above 1 K. However, color centers typically suffer from inhomogeneous broadening, which can be exacerbated by nanofabrication-induced strain, hindering the implementation of quantum nodes emitting indistinguishable photons. Although strain and Raman tuning have been investigated as promising tuning techniques to overcome the spectral mismatch between distinct group-IV color centers, other approaches need to be explored to find methods that can offer more localized control without sacrificing emission intensity. Here, we study the electrical tuning of Sn-V - centers in diamond via the direct-current Stark effect. We demonstrate a tuning range beyond 1.7 GHz. We observe both quadratic and linear dependence on the applied electric field. Further, we also confirm that the tuning effect we observe is a result of the applied electric field and is distinct from thermal tuning due to Joule heating. Stark tuning is a promising avenue toward overcoming detunings between emitters and enabling the realization of multiple identical quantum nodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

GeoRePORT Protocol Volume VI: Resource Size Assessment Tool

GeoRePORT is based on the concept that a geothermal system can be described both in terms of the quality of the geothermal resource as it relates to the potential to extract heat ("Resource Grade") and the progress of research and development over the lifetime of the project ("Project Progress"). Resource grade and project progress are reported for three assessment categories: geologic, technical, and socio-economic. Each category has specific criteria and guidelines for assessing both resource grade and project progress, as outlined in each of the following assessment tools (and associated colors): (1) Geological Assessment Tool (representative colors: reds, oranges, browns); (2) Technical Assessment Tool (representative colors: blues, purples); (3) Socio-Economic Assessment Tool (representative colors: greens, yellows). Additionally, users may need to estimate the project size (often reported in MWe or MWth). The resource size assessment tool (RSAT) is an essential addition to GeoRePORT due to the economic and legal context of geothermal development. In order to utilize a geothermal resource, a competitive Power Purchase Agreement (PPA), or similar, often must be obtained, for which the resource's power capacity must be demonstrated. To determine that a geothermal heat or power project is worthy of development, investors or other funding mechanisms often require information on the anticipated heat and/or power potential of the reservoir. They might also be interested in the certainty of that estimate. However, proving the existence and size of a geothermal resource is comparatively expensive and risky relative to other renewable technologies; it can cost developers 5 to 10 million USD to demonstrate a financially viable geothermal resource (Young et al. 2017). GeoRePORT aims to address this barrier to development by providing a consistent and clear assessment of resource quality and certainty. The RSAT will enable GeoRePORT users to not only qualitatively report on a given a resource, but also to compare standard methodologies for quantitatively estimating a resource size in terms of potential heat and/or power output.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

A Case Study of Tunable White LED Lighting with Networked Lighting Controls (Emory University Cognitive Empowerment Program)

Emory University and Georgia Institute of Technology (Georgia Tech) partnered to create the Charlie and Harriet Schaffer Cognitive Empowerment Program (CEP) facility in northeast Atlanta. Together with the funders they are building a program to help individuals experiencing mild cognitive impairment (MCI) to maintain their physical and cognitive health, and independence as long as possible. In addition to applying effective strategies and therapies, the two research groups are investigating the responses of the MCI members to treatments that involve acoustical conditions, exercise and movement, and lighting changes that may support retention or relearning of skills. Care partners and family members receive support and instruction to improve home and work life, promoting joy, purpose, and wellness in the family groups. The lighting system uses tunable-white LEDs, employing luminaires with both warm and cool-color emitters that can be dimmed separately to produce any white correlated color temperature (CCT) between 2700 K and 6500 K. All luminaires were dimmable to achieve subdued or lively surroundings for different treatments, time-of-day, and mood. A central networked digital control system was employed to allow tuning of multiple spaces together (for example, bright, cool morning light could be programmed for extra stimulation, or lighting in all spaces at the end of the day could be reduced in both light output and CCT to promote relaxation and not interfere with the melatonin cycle of occupants). Almost all spaces were equipped with individual room control of dimming and color temperature with touch screens to allow users to tune the lighting as desired, but each room’s controls could also be specially programmed through the server in case the research staff were investigating lighting settings on learning, for example. The server incorporates a timeclock, and it is able to send signals to switch off all lighting after occupancy hours, or enable occupancy sensors to control the lighting. The bulk of the construction work was completed in January 2020. It was clear from an initial walk-through that although the lighting system produced the expected high light level with low-glare qualities of light, that there were issues and inconsistencies to be resolved. These were noted in an initial punchlist visit and expected to be resolved when the tech representatives from the agency visited with the electrical contractor in the following few weeks. What followed was 2.5 years of identifying unexpected lighting performance in terms of light output, color, scheduling, and occupancy. This report documents the issues encountered in the effort to get the lighting and controls systems to operate as intended. It concludes with guidance for design professionals and manufacturers to help avoid problematic complexity in future projects.

42 ENGINEERING↗
DOE OSTI2024

Mechanochromic Palettes of Cholesteric Liquid Crystal Elastomers for Visual Signaling

Mechanochromic photonic materials present promising prospects for enhancing diverse facets of human life. Cholesteric liquid crystal elastomers (CLCEs) present immediate mechanochromic properties, allowing their utility in various fields, including camouflages, textiles, and anticounterfeiting. Nonetheless, it is essential to provide differentiated color information corresponding to diverse types and degrees of deformation for practical use in real life. Herein, we investigate the mechanochromic responses of CLCEs using their optical rotation under compression and uniaxial stretching. The CLCEs exhibit the same reflection colors indistinguishable for compression and uniaxial stretching due to their contracted pitches. In contrast, the linearly polarized light passing through deformed CLCEs can be modulated by optical rotation, resulting in distinct transmission colors that can be discerned through mechanical deformations. We demonstrate a visual signaling system with color information derived from optical rotation. By comprehending and manipulating the mechanoresponsive behavior of CLCEs, we can advance these materials into innovative solutions with enhanced functionality and performance, thereby broadening their applications for human life enhancement.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Parallelization techniques for quantum simulation of fermionic systems

Mapping fermionic operators to qubit operators is an essential step for simulating fermionic systems on a quantum computer. We investigate how the choice of such a mapping interacts with the underlying qubit connectivity of the quantum processor to enable (or impede) parallelization of the resulting Hamiltonian-simulation algorithm. It is shown that this problem can be mapped to a path coloring problem on a graph constructed from the particular choice of encoding fermions onto qubits and the fermionic interactions onto paths. The basic version of this problem is called the weak coloring problem. Taking into account the fine-grained details of the mapping yields what is called the strong coloring problem, which leads to improved parallelization performance. A variety of illustrative analytical and numerical examples are presented to demonstrate the amount of improvement for both weak and strong coloring-based parallelizations. Our results are particularly important for implementation on near-term quantum processors where minimizing circuit depth is necessary for algorithmic feasibility.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

SCExAO/CHARIS Near-infrared Integral Field Spectroscopy of the HD 15115 Debris Disk

We present new, near-infrared (1.1–2.4 μm) high-contrast imaging of the debris disk around HD 15115 with the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system coupled with the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS). The SCExAO/CHARIS resolves the disk down to ρ ∼ 0.″2 (r {sub proj} ∼ 10 au), a factor of ∼3–5 smaller than previous recent studies. We derive a disk position angle of PA ∼ 279.°4–280.°5 and an inclination of i ∼ 85.°3–86.2.°. While recent SPHERE/IRDIS imagery of the system could suggest a significantly misaligned two-ring disk geometry, CHARIS imagery does not reveal conclusive evidence for this hypothesis. Moreover, optimizing models of both one- and two-ring geometries using differential evolution, we find that a single ring having a Hong-like scattering phase function matches the data equally well within the CHARIS field of view (ρ ≲ 1″). The disk’s asymmetry, well evidenced at larger separations, is also recovered; the west side of the disk appears, on average, around 0.4 mag brighter across the CHARIS bandpass between 0.″25 and 1″. Comparing Space Telescope Imaging Spectrograph (STIS) 50CCD optical photometry (2000–10500 Å) with CHARIS near-infrared photometry, we find a red (STIS/50CCD−CHARIS broadband) color for both sides of the disk throughout the 0.″4–1″ region of overlap, in contrast to the blue color reported at similar wavelengths for regions exterior to ∼2″. Further, this color may suggest a smaller minimum grain size than previously estimated at larger separations. Finally, we provide constraints on planetary companions and discuss possible mechanisms for the observed inner disk flux asymmetry and color.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A Differential Measurement of Circumstellar Extinction for AA Tau’s 2011 Dimming Event

AA Tau is a classical T Tauri star with a highly inclined, warped circumstellar disk. For decades, AA Tau exhibited photometric and spectroscopic variabilities that were successfully modeled as occultations of the primary star by circumstellar material. In 2011, AA Tau entered an extended faint state, presumably due to enhanced levels of circumstellar dust. We use two sets of contemporaneous optical–near-IR (NIR) spectra of AA Tau, obtained in 2008 and 2014 December, to directly measure the wavelength-dependent extinction associated with the dust enhancement driving AA Tau’s 2011 optical fade. Taken alone, AA Tau’s apparent optical–NIR increased extinction curve cannot be fit well with standard extinction laws. At optical wavelengths, AA Tau’s dimming event is consistent with predictions of common extinction models for an increase of A {sub V} = 2, but no such model reproduces AA Tau’s color–color excess at NIR wavelengths. We show that veiling emission accounts for the apparent anomalous NIR extinction: after including this veiling flux, AA Tau’s dimming event is consistent with a standard A {sub V} = 2 extinction law across the full optical–NIR range. We also report an increase in AA Tau’s mid-IR flux since its 2011 fade and suggest that an increase in the height of AA Tau’s inner disk is the most likely explanation for both the IR brightening and the additional extinction along the line of sight. In addition to informing our understanding of AA Tau, this analysis demonstrates that caution should be exercised when inferring extinction (and stellar parameters) from the NIR color–color excess of young stars with measurable NIR veiling fluxes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

The Galaxy–Halo Connection of DESI Luminous Red Galaxies with Subhalo Abundance Matching

Abstract We use subhalo abundance and age distribution matching to create magnitude-limited mock galaxy catalogs at z ∼ 0.43, 0.52, and 0.63 with z -band and 3.4 μ m W 1-band absolute magnitudes and r − z and r − W 1 colors. From these magnitude-limited mocks, we select mock luminous red galaxy (LRG) samples according to the ( r − z )-based (optical) and ( r − W 1)-based (infrared) selection criteria for the LRG sample of the Dark Energy Spectroscopic Instrument (DESI) survey. Our models reproduce the number densities, luminosity functions, color distributions, and projected clustering of the DESI Legacy Surveys that are the basis for DESI LRG target selection. We predict the halo occupation statistics of both optical and IR DESI LRGs at fixed cosmology and assess the differences between the two LRG samples. We find that IR-based SHAM modeling represents the differences between the optical and IR LRG populations better than using the z band and that age distribution matching overpredicts the clustering of LRGs, implying that galaxy color is uncorrelated with halo age in the LRG regime. Both the optical and IR DESI LRG target selections exclude some of the most luminous galaxies that would appear to be LRGs based on their position on the red sequence in optical color–magnitude space. Both selections also yield populations with a nontrivial LRG–halo connection that does not reach unity for the most massive halos. We find that the IR selection achieves greater completeness (≳90%) than the optical selection across all redshift bins studied.

Berti, Angela M. (ORCID:0000000335826649)↗
NASA NTRS1971

Remote sensing of changes in morphology and physiology of trees under stress

Measurements on foliage samples collected from several drought and salt treated plants revealed that leaf thickness decreased with increasing severity of the drought treatment and increased with increasing severity of treatment with NaCl, but remained essentially unaffected by treatment with CaCl2. Airborne data collected by multispectral scanner indicated that false color images provide selective enhancement of a diseased area. Comparison of simulated and actual aerial color and color IR photography revealed that the color renditions of the MSS simulations agreed closely with those of the actual photography.

Olson, C. E., Jr.↗
NASA NTRS1971

Polymer formation in a simulated Jovian atmosphere.

Experimental investigation in which an attempt was made to fractionate the polymeric substances in a simulated Jovian atmosphere according to molecular weight, and to characterize them. It is pointed out that the substance obtained by discharge in methane and ammonia has often been assumed to be the substance responsible for the red color of Jupiter. The deposit formed on the reaction vessel really looks reddish. When the substance was fractionated according to the molecular weight, the color was darker the larger the molecular weight. However, the spectrum of the color was, whether by absorption or by the combination of scattering and fluorescence, indistinguishable regardless of the molecular weight of the fraction. In addition, the apparent color changes when the concentration varies. It would not be simple to identify the red substance in Jupiter.

Noda, H.↗
NASA NTRS1971

Theoretical colours for F and G dwarf stars.

Synthetic spectra have been computed for F and G dwarf stars, using a number of values of chemical abundance, Doppler broadening velocity, and damping constant. Metal abundances for a number of such stars have been obtained using computed and observed m(sub 1) and 40-52 colors. These abundances are in good agreement with spectroscopically determined ones. The c(sub 1) colors of such stars with exactly known trigonometric parallaxes have been used in order to determine how accurately absolute magnitudes can be predicted from the colors. Generally reasonable agreement can be obtained between observed and predicted absolute magnitudes for certain of these stars. The effects of interstellar reddening on the colors of the models are examined.

Bell, R. A.↗
NASA NTRS1972

Identification, definition and mapping of terrestrial ecosystems in interior Alaska

The author has identified the following significant results. A reconstituted color infrared image covering the western Seward Peninsula was used for identifying vegetation types by simple visual examination. The image was taken by ERTS-1 approximately 1120 hours on August 1, 1972. Seven major colors were identified. Four of these were matched with four units on existing vegetation maps: bright red - shrub thicket; light gray-red - upland tundra; medium gray-red - coastal wet tundra; gray - alpine barrens. In the bright red color, two phases, violet and orange, were recognized and tentatively ascribed to differences in species composition in the shrub thicket type. The three colors which had no map unit equivalents were interpreted as follows: pink - grassland tundra; dark gray-red - burn scars; light orange-red - senescent vegetation. It was concluded that the image provides a considerable amount of information regarding the distribution of vegetation types, even at so simple a leval of analysis. It was also concluded that sequential imagery of this type could provide useful information on vegetation fires and phenologic events.

Anderson, J. H.↗
NASA NTRS1973

Land use mapping and modelling for the Phoenix Quadrangle

The author has identified the following significant results. Comparison of 9 x 9 MSS band images and color composites made from bands 4, 5, and 6 showing vegetated areas near Phoenix during the summer and fall seasons aided in definitely establishing that certain land areas were being used as agricultural land and not as rangeland. Agricultural land, which appeared to be fallow, idle, or not irrigated, often became more readily identifiable as agricultural land when comparing different images of identical land areas which have been affected by seasonal vegetation changes. Experimentation with color density slicing portions of 9 x 9 MSS band 7 transparency showing the central urban core of phoenix enabled dense commercial and industrial areas to be separated from less dense urbanized land uses; however, loss of resolution produced results of limited usefulness. The best results in agricultural areas near Sun City were obtained using MSS band 5 imagery. Discrimination of different land uses in both urban and agricultural areas which were color density sliced was not possible to the degree of accuracy necessary to make mapping feasible. Examination of MSS transparencies and color composites allowed updating of a map of land use change in the Phoenix Quadrangle.

Place, J. L.↗
NASA NTRS1973

Application of remote sensing techniques to the geology of the bonanza volcanic center

A program is reported for evaluating remote sensing as an aid to geologic mapping for the past four years. Data tested in this evaluation include color and color infrared photography, multiband photography, low sun-angle photography, thermal infrared scanner imagery, and side-looking airborne radar. The relative utility of color and color infrared photography was tested as it was used to refine geologic maps in previously mapped areas, as field photos while mapping in the field, and in making photogeologic maps prior to field mapping. The latter technique served as a test of the maximum utility of the photography. In this application the photography was used successfully to locate 75% of all faults in a portion of the geologically complex Bonanza volcanic center and to map and correctly identify 93% of all Quaternary deposits and 62% of all areas of Tertiary volcanic outcrop in the area.

Marrs, R. W.↗
NASA NTRS1973

Asteroid spectral reflectivities.

We measured spectral reflectivities (0.3-1.1 micron) for 32 asteroids. There are at least 14 different curve types. Common types are: (a) reddish curves with 10% absorptions near 0.95 micron or beyond 1.0 micron, due to Fe(2+) in minerals such as pyroxenes; (b) flat curves in the visible and near-IR with sharp decreases in the UV and (c) flat curves even into the UV. Several asteroids show probable color variations with rotation, especially 6 Hebe. A sample of 102 asteroids with reliably known colors is derived from the reflectivities and from earlier colorimetry. Several correlations of colors and spectral curve types with orbital and physical parameters are examined: (1) asteroids with large aphelia have flat reflectivities while those with small perihelia are mostly reddish, (2) curve types show evidence for clustering on an a vs e plot, with 0.95 micron bands occuring mainly for Mars-approaching asteroids, (3) no strong correlation exists between color and either proper eccentricity or proper inclination.

Chapman, C. R.↗
NASA NTRS1973

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

The author has identified the following significant results. An operational technique for producing high resolution false color composites of ERTS-1 MSS imagery has been developed. The technique uses standard NASA (NDPF) or EROS black/white data products, and permits a broad range of control on composite color balance and contrast range. The use of an additive color viewer has proven valuable for determining the optimum color balance of composites for effective interpretation. The compositing technique is adaptable for effective interpretation. The technique is adaptable to data from a variety of multispectral imaging systems, including multi-seasonal and multipolarization data. A 50 mile north-trending linear anomaly recognized in ERTS-1 MSS imagery west of Goldfield, Nevada has been confirmed as a steeply west-dipping normal fault, here termed the Paymaster Fault. This structure trends southward from the General Thomas Hills along Paymaster Valley and the east side of Clayton Valley into the Palmetto Mountains. There, it terminates against a less pronounced east-trending transverse anomaly which is also believed to be fault controlled. The Paymaster Fault is the most prominent of several large normal faults which terminate southward against this transverse anomaly.

Liggett, M. A.↗
NASA NTRS1974

Management of natural resources through automatic cartographic inventory

The author has identified the following significant results. (1) Accurate recognition of previously known ground features from ERTS-1 imagery has been confirmed and a probable detection range for the major signatures can be given. (2) Unidentified elements, however, must be decoded by means of the equal densitometric value zone method. (3) Determination of these zonings involves an analogical treatment of images using the color equidensity methods (pseudo-color), color composites and especially temporal color composite (repetitive superposition). (4) After this analogical preparation, the digital equidensities can be processed by computer in the four MSS bands, according to a series of transfer operations from imagery and automatic cartography.

Rey, P.↗