SEARCH · Engineering Papers

Results for “Approximation methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Extension of transonic flow computational concepts in the analysis of cavitated bearings

An analogy between the mathematical modeling of transonic potential flow and the flow in a cavitating bearing is described. Based on the similarities, characteristics of the cavitated region and jump conditions across the film reformation and rupture fronts are developed using the method of weak solutions. The mathematical analogy is extended by utilizing a few computational concepts of transonic flow to numerically model the cavitating bearing. Methods of shock fitting and shock capturing are discussed. Various procedures used in transonic flow computations are adapted to bearing cavitation applications, for example, type differencing, grid transformation, an approximate factorization technique, and Newton's iteration method. These concepts have proved to be successful and have vastly improved the efficiency of numerical modeling of cavitated bearings.

Vijayaraghavan, D.↗

NASA NTRS1990

Extension of transonic flow computational concepts in the analysis of cavitated bearings

Vijayaraghavan, D.↗

NASA NTRS1986

Computation of turbulent pipe and duct flow using third order upwind scheme

The fully developed turbulence in a circular pipe and in a square duct is simulated directly without using turbulence models in the Navier-Stokes equations. The utilized method employs a third-order upwind scheme for the approximation to the nonlinear term and the second-order Adams-Bashforth method for the time derivative in the Navier-Stokes equation. The computational results appear to capture the large-scale turbulent structures at least qualitatively. The significance of the artificial viscosity inherent in the present scheme is discussed.

Kawamura, T.↗

NASA NTRS1988

A virtual crack-closure technique for calculating stress intensity factors for cracked three dimensional bodies

A three-dimensional virtual crack-closure technique is presented which calculates the strain energy release rates and the stress intensity factors using only nodal forces and displacements from a standard finite element analysis. The technique is an extension of the Rybicki-Kanninen (1977) method, and it assumes that any continuous function can be approximated by a finite number of straight line segments. Results obtained by the method for surface cracked plates with and without notches agree favorably with previous results.

Shivakumar, K. N.↗

NASA NTRS1990

Vibrational frequencies for Be3 and Be4

The harmonic frequencies of Be3 and Be4, evaluated by multireference configuration-interaction (MRCI) and singles and doubles coupled-cluster (CCSD) methods, are reported, as are IR intensities evaluated by using the double harmonic approximation. A comparison of the results shows that the CCSD method augmented with a correction for connected triple excitations, CCSD(T), can be a viable alternative to MRCI for determining the ground-state properties of small Be clusters (other than the dimer). Results of normal mode analyses indicate that the anharmonic vibrational frequencies of Be3 and Be4 are reasonably consistent at the CCSD, CCSD(T), or MRCI levels of treatment.

Rendell, Alistair P.↗

NASA NTRS2010

Multiple Exhaust Nozzle Effects on J-2X Gas Generator Outlet Impedance

The current test setup of the J-2X gas generator system uses a multiple nozzle configuration to exhaust hot gases to drive the propellant supply turbines. Combustion stability assessment of this gas generator design requires knowledge of the impedance effects the multiple nozzle configuration creates on the combustion chamber acoustic modes. Parallel work between NASA and Sierra Engineering is presented, showing two methods used to calculate the effective end impedance resulting from multiple nozzle configurations. The NASA method is a simple estimate of the effective impedance using the long wavelength approximation. Sierra Engineering has developed a more robust numerical integration method implemented in ROCCID to accommodate for multiple nozzles. Analysis using both methods are compared to J-2X gas generator test data collected over the past year.

Kenny, R. Jeremy↗

NASA NTRS2001

Modeling and Analysis of Structural Dynamics for a One-Tenth Scale Model NGST Sunshield

New modeling and analysis techniques have been developed for predicting the dynamic behavior of the Next Generation Space Telescope (NGST) sunshield. The sunshield consists of multiple layers of pretensioned, thin-film membranes supported by deployable booms. Modeling the structural dynamic behavior of the sunshield is a challenging aspect of the problem due to the effects of membrane wrinkling. A finite element model of the sunshield was developed using an approximate engineering approach, the cable network method, to account for membrane wrinkling effects. Ground testing of a one-tenth scale model of the NGST sunshield were carried out to provide data for validating the analytical model. A series of analyses were performed to predict the behavior of the sunshield under the ground test conditions. Modal analyses were performed to predict the frequencies and mode shapes of the test article and transient response analyses were completed to simulate impulse excitation tests. Comparison was made between analytical predictions and test measurements for the dynamic behavior of the sunshield. In general, the results show good agreement with the analytical model correctly predicting the approximate frequency and mode shapes for the significant structural modes.

Johnston, John↗

NASA NTRS1981

An approximate solution to improve computational efficiency of impedance-type payload load prediction

The computational efficiency of the impedance type loads prediction method was studied. Three goals were addressed: devise a method to make the impedance method operate more efficiently in the computer; assess the accuracy and convenience of the method for determining the effect of design changes; and investigate the use of the method to identify design changes for reduction of payload loads. The method is suitable for calculation of dynamic response in either the frequency or time domain. It is concluded that: the choice of an orthogonal coordinate system will allow the impedance method to operate more efficiently in the computer; the approximate mode impedance technique is adequate for determining the effect of design changes, and is applicable for both statically determinate and statically indeterminate payload attachments; and beneficial design changes to reduce payload loads can be identified by the combined application of impedance techniques and energy distribution review techniques.

White, C. W.↗

NASA NTRS1992

Rational approximations from power series of vector-valued meromorphic functions

Let F(z) be a vector-valued function, F: C yields C(sup N), which is analytic at z = 0 and meromorphic in a neighborhood of z = 0, and let its Maclaurin series be given. In this work we developed vector-valued rational approximation procedures for F(z) by applying vector extrapolation methods to the sequence of partial sums of its Maclaurin series. We analyzed some of the algebraic and analytic properties of the rational approximations thus obtained, and showed that they were akin to Pade approximations. In particular, we proved a Koenig type theorem concerning their poles and a de Montessus type theorem concerning their uniform convergence. We showed how optical approximations to multiple poles and to Laurent expansions about these poles can be constructed. Extensions of the procedures above and the accompanying theoretical results to functions defined in arbitrary linear spaces was also considered. One of the most interesting and immediate applications of the results of this work is to the matrix eigenvalue problem. In a forthcoming paper we exploited the developments of the present work to devise bona fide generalizations of the classical power method that are especially suitable for very large and sparse matrices. These generalizations can be used to approximate simultaneously several of the largest distinct eigenvalues and corresponding eigenvectors and invariant subspaces of arbitrary matrices which may or may not be diagonalizable, and are very closely related with known Krylov subspace methods.

Sidi, Avram↗

NASA NTRS1988

A second-order analytic analysis for frozen orbits

An analytical method for studying characteristics of frozen orbits using mean orbital elements is presented. By removing some of the approximations of Brouwer and Kosai (1959) and using the method of integration by parts, an analytic solution is obtained accurate to the second order in the sense of expansion of the perturbing potential of an aspherical approximation. The solution applies to orbits at and near the critical inclination as well as to frozen orbits and, of course, to unfrozen orbits. The analysis reveals that a frozen orbit can be interpreted as an orbit in which movements of the long-periodic part of the rate of change of periapsis cancels the secular part exactly at any time.

Tang, Charles C. H.↗

NASA NTRS1993

Chronology of lunar granite 12033,576: Resetting of Rb-Sr and K-Ca isochrons

Lunar granite 12033,576 is a subsample of the 'large' (approximately 1 g) felsite 12033,507 which was identified from a collection of 4-10 mm particles from the 12033 soil sampled from the north rim of Head Crater in the eastern part of Oceanus Procellarum. Discordant ages of approximately 3.6, approximately 0.8, approximately 3.9, and approximately 2.2 Ga for this lunar granite were obtained, respectively, by the K-Ca, Ar-39/Ar-40, and U-Pb zircon methods in previous studies and by the Rb-Sr method is this study. Assuming the granite crystallized approximately 3.9 Ga ago (zircon age) and was shocked by meteoritic impacts at 0.8 Ga ago (Ar-39-Ar-40 age), the intermediate apparent ages by the Rb-Sr and K-Ca methods can be interpreted as reset by diffusion of the parent and daughter nuclides. The Rb-Sr age is less resistant to resetting than the K-Ca age, but more resistant that the Ar-39/Ar-40 age.

Shih, C.-Y.↗

NASA NTRS2010

Charge-Spot Model for Electrostatic Forces in Simulation of Fine Particulates

The charge-spot technique for modeling the static electric forces acting between charged fine particles entails treating electric charges on individual particles as small sets of discrete point charges, located near their surfaces. This is in contrast to existing models, which assume a single charge per particle. The charge-spot technique more accurately describes the forces, torques, and moments that act on triboelectrically charged particles, especially image-charge forces acting near conducting surfaces. The discrete element method (DEM) simulation uses a truncation range to limit the number of near-neighbor charge spots via a shifted and truncated potential Coulomb interaction. The model can be readily adapted to account for induced dipoles in uncharged particles (and thus dielectrophoretic forces) by allowing two charge spots of opposite signs to be created in response to an external electric field. To account for virtual overlap during contacts, the model can be set to automatically scale down the effective charge in proportion to the amount of virtual overlap of the charge spots. This can be accomplished by mimicking the behavior of two real overlapping spherical charge clouds, or with other approximate forms. The charge-spot method much more closely resembles real non-uniform surface charge distributions that result from tribocharging than simpler approaches, which just assign a single total charge to a particle. With the charge-spot model, a single particle may have a zero net charge, but still have both positive and negative charge spots, which could produce substantial forces on the particle when it is close to other charges, when it is in an external electric field, or when near a conducting surface. Since the charge-spot model can contain any number of charges per particle, can be used with only one or two charge spots per particle for simulating charging from solar wind bombardment, or with several charge spots for simulating triboelectric charging. Adhesive image-charge forces acting on charged particles touching conducting surfaces can be up to 50 times stronger if the charge is located in discrete spots on the particle surface instead of being distributed uniformly over the surface of the particle, as is assumed by most other models. Besides being useful in modeling particulates in space and distant objects, this modeling technique is useful for electrophotography (used in copiers) and in simulating the effects of static charge in the pulmonary delivery of fine dry powders.

Walton, Otis R.↗

NASA NTRS1985

Black hole normal modes - A semianalytic approach

A new semianalytic technique for determining the complex normal mode frequencies of black holes is presented. The method is based on the WKB approximation. It yields a simple analytic formula that gives the real and imaginary parts of the frequency in terms of the parameters of the black hole and of the field whose perturbation is under study, and in terms of the quantity (n + 1/2), where n = 0, 1, 2,... and labels the fundamental mode, first overtone mode, and so on. In the case of the fundamental gravitational normal modes of the Schwarzschild black hole, the WKB estimates agree with numerical results to better than 7 percent in the real part of the frequency and 0.7 percent in the imaginary part, with the relative agreement improving with increasing angular harmonic. Carried to higher order the method may provide an accurate and systematic means to study black hole normal modes.

Schutz, B. F.↗

NASA NTRS1972

Numerical methods for solving the Boltzmann equation (a review)

The methods are reviewed which are utilized in principal attempts to obtain the numerical solution or modeling of the Boltzmann equation over a broad range of Knudsen numbers. The primary methods considered are the Monte Carlo and the discrete velocities methods. The conculsions drawn from the analysis include the following: (1) The Monte Carlo methods are not well suited in the area of small Knudsen numbers. (2) Among the Monte Carlo methods, the Bird method appears to be the most attractive, since it is more directly related to the Boltzmann equation. (3) The deterministic methods, which include the discrete ordinate technique, offer great possibilities but require exceedingly large computer times. (4) The use of approximating equations in combination with the discrete velocities method will possibly improve computation time and reduce the required memory volume.

Limar, Y. F.↗

NASA NTRS1976

Approximation concepts for efficient structural synthesis

It is shown that efficient structural synthesis capabilities can be created by using approximation concepts to mesh finite element structural analysis methods with nonlinear mathematical programming techniques. The history of the application of mathematical programming techniques to structural design optimization problems is reviewed. Several rather general approximation concepts are described along with the technical foundations of the ACCESS 1 computer program, which implements several approximation concepts. A substantial collection of structural design problems involving truss and idealized wing structures is presented. It is concluded that since the basic ideas employed in creating the ACCESS 1 program are rather general, its successful development supports the contention that the introduction of approximation concepts will lead to the emergence of a new generation of practical and efficient, large scale, structural synthesis capabilities in which finite element analysis methods and mathematical programming algorithms will play a central role.

Schmit, L. A., Jr.↗

NASA NTRS1996

Application of an Upwind High Resolution Finite-Differencing Scheme and Multigrid Method in Steady-State Incompressible Flow Simulations

The analysis and design of a submarine propulsor requires the ability to predict the characteristics of both laminar and turbulent flows to a higher degree of accuracy. This report presents results of certain benchmark computations based on an upwind, high-resolution, finite-differencing Navier-Stokes solver. The purpose of the computations is to evaluate the ability, the accuracy and the performance of the solver in the simulation of detailed features of viscous flows. Features of interest include flow separation and reattachment, surface pressure and skin friction distributions. Those features are particularly relevant to the propulsor analysis. Test cases with a wide range of Reynolds numbers are selected; therefore, the effects of the convective and the diffusive terms of the solver can be evaluated separately. Test cases include flows over bluff bodies, such as circular cylinders and spheres, at various low Reynolds numbers, flows over a flat plate with and without turbulence effects, and turbulent flows over axisymmetric bodies with and without propulsor effects. Finally, to enhance the iterative solution procedure, a full approximation scheme V-cycle multigrid method is implemented. Preliminary results indicate that the method significantly reduces the computational effort.

NAVIER STOKES EQUATIONS↗

NASA NTRS1990

Numerical derivative techniques for trajectory optimization

The adoption of robust numerical optimization techniques in trajectory simulation programs has resulted in powerful design and analysis tools. These trajectory simulation/optimization programs are widely used, and a representative list includes the GTS system, the POST program, and newer collocation methods such as OTIS and FONPAC. All of these programs rely on optimization algorithms which require objective function and constraint gradient data during the iteration process. However, most trajectory optimization problems lack simple analytical expressions for these derivatives. In the general case a function evaluation involves integrating aerodynamic, propulsive, and gravity forces over multiple trajectory phases with complex control models. With the newer collocation methods, the integration is replaced by defect constraints and cubic approximations for the state. While analytic gradient expressions can sometimes be derived for trajectory optimization problems, the derivation is cumbersome, time consuming, and prone to mistakes. Fortunately, an alternate method exists for the gradient evaluation, namely finite difference approximations. In this paper some finite difference gradient techniques developed for use with the GTS system are presented. These techniques include methods for computing first and second partial derivatives of single and multiple sets of functions. A key feature of these methods is an error control mechanism which automatically adjusts the perturbation size to obtain accurate derivative values.

Hallman, Wayne P.↗

NASA NTRS1990

Linear-phase approximation in the triangular facet near-field physical optics computer program

Analyses of reflector antenna surfaces use a computer program based on a discrete approximation of the radiation integral. The calculation replaces the actual surface with a triangular facet representation; the physical optics current is assumed to be constant over each facet. Described here is a method of calculation using linear-phase approximation of the surface currents of parabolas, ellipses, and shaped subreflectors and compares results with a previous program that used a constant-phase approximation of the triangular facets. The results show that the linear-phase approximation is a significant improvement over the constant-phase approximation, and enables computation of 100 to 1,000 lambda reflectors within a reasonable time on a Cray computer.

Imbriale, W. A.↗