SEARCH · Engineering Papers

Results for “Alternative Relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

All sources NASA NTRS DOE OSTI

NASA NTRS2014

Remote Sensing of Cloud Top Height from SEVIRI: Analysis of Eleven Current Retrieval Algorithms

The role of clouds remains the largest uncertainty in climate projections. They influence solar and thermal radiative transfer and the earth's water cycle. Therefore, there is an urgent need for accurate cloud observations to validate climate models and to monitor climate change. Passive satellite imagers measuring radiation at visible to thermal infrared (IR) wavelengths provide a wealth of information on cloud properties. Among others, the cloud top height (CTH) - a crucial parameter to estimate the thermal cloud radiative forcing - can be retrieved. In this paper we investigate the skill of ten current retrieval algorithms to estimate the CTH using observations from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) onboard Meteosat Second Generation (MSG). In the first part we compare ten SEVIRI cloud top pressure (CTP) data sets with each other. The SEVIRI algorithms catch the latitudinal variation of the CTP in a similar way. The agreement is better in the extratropics than in the tropics. In the tropics multi-layer clouds and thin cirrus layers complicate the CTP retrieval, whereas a good agreement among the algorithms is found for trade wind cumulus, marine stratocumulus and the optically thick cores of the deep convective system. In the second part of the paper the SEVIRI retrievals are compared to CTH observations from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) and Cloud Profiling Radar (CPR) instruments. It is important to note that the different measurement techniques cause differences in the retrieved CTH data. SEVIRI measures a radiatively effective CTH, while the CTH of the active instruments is derived from the return time of the emitted radar or lidar signal. Therefore, some systematic differences are expected. On average the CTHs detected by the SEVIRI algorithms are 1.0 to 2.5 kilometers lower than CALIOP observations, and the correlation coefficients between the SEVIRI and the CALIOP data sets range between 0.77 and 0.90. The average CTHs derived by the SEVIRI algorithms are closer to the CPR measurements than to CALIOP measurements. The biases between SEVIRI and CPR retrievals range from −0.8 kilometers to 0.6 kilometers. The correlation coefficients of CPR and SEVIRI observations vary between 0.82 and 0.89. To discuss the origin of the CTH deviation, we investigate three cloud categories: optically thin and thick single layer as well as multi-layer clouds. For optically thick clouds the correlation coefficients between the SEVIRI and the reference data sets are usually above 0.95. For optically thin single layer clouds the correlation coefficients are still above 0.92. For this cloud category the SEVIRI algorithms yield CTHs that are lower than CALIOP and similar to CPR observations. Most challenging are the multi-layer clouds, where the correlation coefficients are for most algorithms between 0.6 and 0.8. Finally, we evaluate the performance of the SEVIRI retrievals for boundary layer clouds. While the CTH retrieval for this cloud type is relatively accurate, there are still considerable differences between the algorithms. These are related to the uncertainties and limited vertical resolution of the assumed temperature profiles in combination with the presence of temperature inversions, which lead to ambiguities in the CTH retrieval. Alternative approaches for the CTH retrieval of low clouds are discussed.

Hamann, U.↗

NASA NTRS2019

A Study on the Use of Solid-Oxide Fuel Cells for Increased Power Generation on Small Aircraft

A growing demand for higher-power electrical equipment on aircraft is driving the exploration of alternative electrical power generation devices. “Hybrid-electric” aircraft architectures that leverage multiple or alternative power sources are also becoming more popular with rising concerns over efficiency. Fuel cells are particularly interesting as auxiliary or secondary electrical power generation devices, due to their relative efficiency and longevity, and could be used as a “power pod” for vehicles without enough on-board electrical generation capability. This paper examines the feasibility and potential value of using an externally-mounted, hybridelectric, solid-oxide fuel cell (SOFC) power system on a Class IV unmanned aerial vehicle (UAV) for the purpose of power generation in excess of the baseline electrical load. Moreover, the paper will demonstrate that a SOFC auxiliary power unit (APU) provides significant value to an aircraft by producing a relatively large amount of additional electrical power for a relatively low initial investment when compared to producing additional power by scaling the engine.

Litherland, Brandon L.↗

NASA NTRSDate not supplied

NASA Small Spacecraft and Distributed Systems Program - Recent and Upcoming Technology Demonstrations and Development Efforts

NASA’s Small Spacecraft & Distributed Systems (SSDS) program strengthens U.S. ability to conduct unique missions by rapidly developing and demonstrating capabilities for SmallSat exploration, science, and commercial space. In collaboration with NASA Centers, other government agencies, commercial industry, and academia, SSDS advances next generation SmallSat technologies like power, processing, propulsion, communications, autonomous navigation, architectures (swarms), and applications (AI/ML/Edge Computing)—to extend missions beyond LEO into cislunar and planetary space. Various investment mechanisms exist for SSDS to select and fund projects that will ultimately advance NASA’s Moon to Mars Architecture. Presented here are the latest achievements and findings from recently completed SSDS projects, along with updates from ongoing efforts and planned future work. Successful missions like Starling and CAPSTONE continue to demonstrate their capability after several years on-orbit. Advancements in next generation swarm configurations are being implemented by Starling for space traffic monitoring and management applications. Findings from recent SSDS flight projects are discussed: DiskSat, a unique SmallSat platform alternative to canisterized nanosatellites, launched December 2025 and is gathering data; the PTD series of missions concluded in December 2025. Current SSDS efforts are focused on addressing NASA Shortfalls relating to rendezvous and proximity operations, neuromorphic computing, and space situational awareness.

Roger C Hunter↗

NASA NTRSDate not supplied

NASA Small Spacecraft and Distributed Systems: Recent and Upcoming Technology Demonstrations and Development Efforts

Roger Hunter↗

NASA NTRS2001

Radiation transport modeling and assessment to better predict radiation exposure, dose, and toxicological effects to human organs on long duration space flights

NASA is very interested in improving its ability to monitor and forecast the radiation levels that pose a health risk to space-walking astronauts as they construct the International Space Station and astronauts that will participate in long-term and deep-space missions. Human exploratory missions to the moon and Mars within the next quarter century, will expose crews to transient radiation from solar particle events which include high-energy galactic cosmic rays and high-energy protons. Because the radiation levels in space are high and solar activity is presently unpredictable, adequate shielding is needed to minimize the deleterious health effects of exposure to radiation. Today, numerous models have been developed and used to predict radiation exposure. Such a model is the Space Environment Information Systems (SPENVIS) modeling program, developed by the Belgian Institute for Space Aeronautics. SPENVIS, which has been assessed to be an excellent tool in characterizing the radiation environment for microelectronics and investigating orbital debris, is being evaluated for its usefulness with determining the dose and dose-equivalent for human exposure. Thus far. the calculations for dose-depth relations under varying shielding conditions have been in agreement with calculations done using HZETRN and PDOSE, which are well-known and widely used models for characterizing the environments for human exploratory missions. There is disagreement when assessing the impact of secondary radiation particles since SPENVIS does a crude estimation of the secondary radiation particles when calculating LET versus Flux. SPENVIS was used to model dose-depth relations for the blood-forming organs. Radiation sickness and cancer are life-threatening consequences resulting from radiation exposure. In space. exposure to radiation generally includes all of the critical organs. Biological and toxicological impacts have been included for discussion along with alternative risk mitigation methods--shielding and anti-carcinogens. c 2001. Elsevier Science Ltd. All rights reserved.

STS-91 Shuttle Project↗

DOE OSTI2023

Reductive chemistry of pyrrolic macrocycles: A PCET dichotomy between metal and ligand

Proton-coupled electron transfer (PCET) is central to the reactivity of porphyrins. The coupling of the electron to the proton is central to a porphyrin’s ability to catalyze energy conversion reactions of which the hydrogen evolution reaction (HER) is exemplary. To understand the mechanistic details of the PCET chemistry of porphyrins and related macrocyclic congeners, we have designed hangman constructs that allow a proton, placed in the secondary coordination sphere (off of the hangman backbone), to be coupled to redox transformations at the macrocycle. For metals whose reduction potentials are positive of the porphyrin macrocycle, such as Co and Fe, HER catalysis is confined to PCET transformations of the metal center where the active catalyst for HER is a reduced metal hydride. Alternatively, the reduction potentials of Ni, Zn, and 2H (freebase) porphyrins allow for redox non-innocence of the macrocycle; here the active “hydridic” catalyst is a phlorin, which gives rise to elaborate HER reaction sequences. Beyond HER catalysis, redox non-innocence of Ni, Zn, and 2H porphyrins and related compounds has been informative for providing detailed mechanistic insight into the multi-site PCET hydrogenation of olefinic bonds of the macrocycle. This mini-review unravels the PCET dichotomy between the metal and macrocycle in promoting HER catalysis and novel chemical transformations that give rise to unusual macrocyclic structures.

Chemistry↗

NASA NTRS1976

Screening analysis and selection of emission reduction concepts for intermittent combustion aircraft engines

An analysis was conducted to screen, evaluate, and select three engine exhaust emission reduction concepts from a group of 14 candidate alternatives. A comprehensive literature search was conducted to survey the emission reduction technology state-of-the-art and establish contact with firms working on intermittent combustion engine development and pollution reduction problems. Concept development, advantages, disadvantages, and expected emission reduction responses are stated. A set of cost effectiveness criteria was developed, appraised for relative importance, and traded off against each concept so that its merit could be determined. A decision model was used to aid the evaluators in managing the criteria, making consistent judgements, calculating merit scores, and ranking the concepts. An Improved Fuel Injection System, Improved Cooling Combustion Chamber, and a Variable Timing Ignition System were recommended to NASA for approval and further concept development. An alternate concept, Air Injection, was also recommended.

Rezy, B. J.↗

DOE OSTI2024

Long-Term Infrasound Sensor Calibration and Characterization

Previous testing has shown that infrasound sensors deployed in the field can exhibit notable deviations from their nominal, lab-based calibrations. These variations may be due to changes in environmental conditions, long-term sensor drift, or other unresolved features. In early 2018, we installed two identical infrasound elements with five infrasound sensors at each element (Chaparral M50A, Chaparral M64LN, CEA/Martec MB2005, CEA/Seismowave MB3a, and Hyperion IFS-5113A). These sensors were accepted or under consideration for use in the International Monitoring System network of the Comprehensive Nuclear-Test-Ban Treaty. Each element had all sensors connected to a single digitizer and port to the atmosphere. We also recorded instrument enclosure air temperature and humidity and external air temperature. Using the MB2005 as the reference, we examine the relative sensor response (both magnitude and phase) as a function of time and frequency and compare it with quarterly laboratory calibrations and environmental conditions. Here, we find that the magnitude response for all sensors exhibits some variability in both the lab and field, with the amplitude variations often >5%. The field-based variations are more severe and occur on both long-term (months) and short-term (hours) timescales. Short-term variability correlates with changes in environmental conditions and is considerable (up to 25%) for the Chaparral M50A and noticeable (∼5%) for the French Alternative Energies and Atomic Energy Commission (CEA) MB3a. Long-term magnitude variability for the Chaparral M50A was up to 50% and does not clearly correlate with environmental conditions. The other sensors show some long-term magnitude offsets, but they have relatively stable responses in the conditions we examined. The MB3a also displays some frequency-dependent magnitude variability and shows a minor dependence on temperature. Phase estimates are stable and near zero for all sensors tested. These results strongly suggest sensor response and variability due to environmental conditions should be considered in future infrasound data interpretation and sensor selection and development.

Fee, David↗

DOE OSTI2014

An Alternative Interpretation of Plasma Selenium Data from Endangered Patagonian Huemul Deer ( Hippocamelus bisulcus )

The prevalence of osteopathology in 57% in the endangered adult Patagonian huemul deer (Hippocamelus bisulcus), malformed antler development, and general lack of recovery were previously suggested to possibly be related to mineral imbalances like selenium (Se) deficiency, and not to stem from fluorosis. From recent bone analyses of these diseased huemul, fluoride levels averaged 58 ppm (SE=10.7), thus eliminating fluorosis as a causal factor for the osteopathology reported in huemul. In contrast, when analyzing high-elevation sites commonly used by extant populations, we found soils deficient in Se. Ashes from recent volcanism also were very low in Se. As Se-responsive diseases in livestock have been documented in Chile, we reclassified recently published Se levels in huemul and determined that 73% were deficient and 18% marginal. Together with these several lines of indirect evidence, we conclude that Se deficiency plays a role in the lack of recovery of huemul populations.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1999

Planar Strain-Rate-Free Diffusion Flames: Initiation, Properties, and Extinction

An effectively strain-rate-free diffusion flame constitutes the most vigorous laminar combustion of initially unmixed reactive gases. Such a diffusion flame is characterized by a relatively long residence time and by a relatively large characteristic length scale. If such a flame were also planar, providing high symmetry, it would be particularly suitable for experimental and theoretical investigations of key combustion phenomena, such as multicomponent diffusion, chemical kinetics, and soot inception, growth, and oxidation. Unfortunately, a planar strain-rate-free diffusion flame is highly disrupted in earth-gravity (e.g., in a counterflow-diffusion-flame apparatus) because of the very rapid onset (approx. 100 ms) of gravity-induced instability. Accordingly, a specially dedicated apparatus was designed, fabricated, and initially checked out for the examination of a planar strain-rate-free diffusion flame in microgravity. Such a diffusion flame may be formed within a hollowed-out squat container (initially configured as 25 cm x 25 cm x 9 cm), with isothermal, noncatalytic, impervious walls. At test initiation, a thin metallic sheet (approx. 1 mm in thickness) that separates the internal volume into two equal portions, each of dimensions 25 cm x 25 cm x 4.5 cm, is withdrawn, by uniform translation (approx. 50 cm/s) in its own plane, through a tightly fitting slit in one side wall. Thereupon, diluted fuel vapor (initially confined to one half-volume of the container) gains access to diluted oxygen (initially with the same pressure, density, and temperature as the fuel, but initially confined to the other half-volume). After a brief delay (approx. 10 ms), to permit limited but sufficient-for-flammability diffusional interpenetration of fuel vapor and oxidizer, burning is initiated by discharge of a line igniter, located along that side wall from which the trailing edge of the separator withdraws. The ignition spawns a triple-flame propagation across the 25 cm x 25 cm centerplane. When a diffusion flame is emplaced in the centerplane, any subsequent travel, and change in temperature, of that planar diffusion flame may be tracked, along with the effectively spatially uniform but temporally evolving pressure within the container. Eventually, nearly complete depletion of the stoichiometrically deficient reactant, along with heat loss to the container surfaces, effects extinction. These data afford an opportunity to check theoretical models of diffusion and chemical kinetics under conditions ranging from intense burning to flame out, or, alternatively, to evolve simple empirical representations of these phenomena. Thus, the project sought to utilize microgravity testing to elucidate commonly encountered phenomenology, arising in the commonly-encountered mode of combustion (whether related to heating, manufacturing, boiling, and propulsion, or to uncontrolled, free-burning fire in structures and wildland vegetation), of those commonly utilized fuels usually categorized as gaseous fuels (such as hydrogen, natural gas, and propane, which are gaseous under atmospheric conditions).

Fendell, Francis↗

NASA NTRS2025

Measuring Unique Contextual Factors: Group Living Skills

BACKGROUND The Human Factors and Behavioral Performance Exploration Measures (HFBP-EM) suite is a set of standardized measures used to assess behavioral health and performance risks related to future exploration-class space missions. During the HFBP-EM suite development, the importance of assessing unique contextual factors to understand the drivers of team dynamics was identified. Group living skills are a unique workplace skill which applies to those coworkers who live and work together. As mission lengths become longer, the line between work and non-work life may blur. Extreme living conditions such as spaceflight can result in increased stress over time, negatively impact mood and well-being, decrease team cohesion and increase conflict, deteriorate task performance, and potentially reduce mission success [1]. With no breaks in their isolated and confined environment possible, living with a messy, inconsiderate crewmember can add to the stress. Alternatively, crews with good group living skills may support one another, mitigating the negative effects of the extreme environment. There was no direct measure of group living skills. This work sought to fill this measurement gap and collect data related to group living in isolated, confined, extreme (ICE) environments. METHODS Group living skills as an astronaut competency area were developed with the input of experts familiar with ICE environments. Distinct aspects of this competency were reviewed and discussed by a NASA-invited group of spaceflight experts in 2015 to identify individual and team behavioral health and performance measures for operational environments. This work resulted in a 5-item measure focused on group living experiences with each crewmember (or the crew as a whole). A 6th item asks whether an individual would go on another mission with a particular crewmember or crew as a measure of future-oriented group living, or team viability. The measure was deployed in 24 teams living and working together in isolated and confined environments (e.g., International Space Station, space mission simulation analogs). RESULTS & DISCUSSION In this presentation, we will summarize results which indicate the Group Living Skills (GLS) Survey is a reliable, valid, and operationally feasible measure. Reliability was evaluated in several ways. Two-way multilevel mixed models revealed strong repeated measures reliability (ICC2 = .902, Omega between = .954). Reliability of change within teams was strong (Rc = .81). Factor analysis showed a consistent two-factor structure when individuals rated either the whole crew, all individuals, just peers, or a focal roommate. The latter used a sociometric approach to rating the GLS of the roommates. The two factors were tidiness and being considerate of others. We assessed the criterion-related validity of GLS, by examining GLS operationalized as the team-level aggregated GLS Survey scores as a predictor of team viability, team cohesion, and team performance. We used generalized mixed models to account for the repeated measures and longitudinal data. The marginal R2 change was used to determine the extent to which GLS were related to the team outcomes while controlling for mission day and campaign. Results suggested GLS was strongly related to team viability (marginal R2 change = .40), team cohesion (marginal R2 change = 0.28), social cohesion (marginal R2 change = 0.25), and moderately related to task cohesion (marginal R2 change = 0.18). GLS scores had a small relationship with team performance (marginal R2 change = .08). Results support GLS as a measure that can be used to capture group living skills of crews who live and work together in ICE. Because the items were written to be broadly applicable, less extreme environments with teams living and working together for some length of time also benefit from this measure (e.g., college roommates, camps). See Landon et al. (2024) for full results [2]. SUMMARY We report reliability and validity evidence for a new measure that assesses the Group Living Skills for teams that live and work in operational environments such as spaceflight.

J C W Miller↗

DOE OSTI2017

hi-class: Horndeski in the Cosmic Linear Anisotropy Solving System

We present the public version of hi-class (www.hiclass-code.net), an extension of the Boltzmann code CLASS to a broad ensemble of modifications to general relativity. In particular, hi-class can calculate predictions for models based on Horndeski's theory, which is the most general scalar-tensor theory described by second-order equations of motion and encompasses any perfect-fluid dark energy, quintessence, Brans-Dicke, f ( R ) and covariant Galileon models. hi-class has been thoroughly tested and can be readily used to understand the impact of alternative theories of gravity on linear structure formation as well as for cosmological parameter extraction.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Energy Consumption and CO 2 Emissions in Ironmaking and Development of a Novel Flash Technology

The issues of energy consumption and CO 2 emissions of major ironmaking processes, including several new technologies, are assessed. These two issues are interconnected in that the production and use of fuels to generate energy add to the total amount of CO 2 emissions and the efforts to sequester or convert CO 2 require energy. The amounts of emissions and energy consumption in alternate ironmaking processes are compared with those for the blast furnace, currently the dominant ironmaking process. Although more than 90% of iron production is currently through the blast furnace, intense efforts are devoted to developing alternative technologies. Recent developments in alternate ironmaking processes, which are largely driven by the needs to decrease CO 2 emissions and energy consumption, are discussed in this article. This discussion will include the description of the recently developed novel flash ironmaking technology. This technology bypasses the cokemaking and pelletization/sintering steps, which are pollution prone and energy intensive, by using iron ore concentrate. This transformational technology renders large energy saving and decreased CO 2 emissions compared with the blast furnace process. Economic analysis indicated that this new technology, when operated using natural gas, would be economically feasible. As a related topic, we will also discuss different methods for computing process energy and total energy requirements in ironmaking.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Linear and Nonlinear Solvers for Simulating Multiphase Flow within Large-Scale Engineered Subsurface Systems

Simulation of multiphase flow in the subsurface is well-known to be computationally challenging. While there have been many studies that have explored approaches to overcoming these challenges, they often utilize relatively simple case studies. In this paper, we focus on the unique numerical challenges posed by modeling large-scale engineered subsurface systems, characterized by discrete features embedded in a heterogeneous natural subsurface setting. The man-made features such as shafts, tunnels, and barriers often cause multiple challenges in modeling the domain for multiphase porous media flow. This flow scenario can have a wide range of applications such as nuclear waste repositories, enhanced recovery of a petroleum reservoir, geothermal engineering, and carbon sequestration. An example of these severe numerical challenges is the case of performance assessment (PA) for Waste Isolation Pilot Plant (WIPP), the only operating deep geological repository in the US, which simulates extreme material properties of bedded salt rock formation and extreme contrast due to open excavation next to the formation. The models have extremes not only of permeability and porosity but also of the constitutive models needed for multiphase flow; additionally, they have process models like salt creep closure reducing porosity over time, fracturing in clay and anhydrite interbeds of the bedded salt, gas generation from the waste materials, and unintentional human borehole intrusions in some scenarios. Numerical simulations require the solution of coupled systems of nonlinear PDEs; in our work, we use the open-source simulator PFLOTRAN which is based on Finite Volume discretization. The solution of the nonlinear equations requires use of the Newton-Raphson iteration at each time step, which entails the solution of the linearized Jacobian system at each iteration. The effects of all the processes (i.e., large number of unknowns, highly nonlinear constitutive relations, large contrasts in material properties in short distances) lead to an ill-conditioned Jacobian matrix that severely challenges traditional linear solver, i.e., stabilized biconjugate gradient with block Jacobi incomplete LU preconditioner (BCGS-ILU) leading to non-convergence for traditional Newton-Raphson nonlinear solver causing unacceptably long computation time for each model. This paper presents linear solvers such as constrained pressure residual (CPR) two-stage preconditioner with alternate-block-factorization (ABF) and quasi- implicit pressure and explicit saturation (QIMPES) decouplers and flexible generalized residual solver (FGMRES). The new general-purpose nonlinear solver, Newton trust-region dogleg Cauchy (NTRDC), is also introduced to resolve extreme nonlinearities in the models. We demonstrate the effectiveness of each method relative to the default BCGS-Newton solver. The two best cases had nearly 50 times speed-up and achieved completion of a simulation in 14 hours that never completed due to non-convergence with the default solver. We also investigate the strong scalability of each method and discuss some of the deficiencies found for Block Jacobi preconditioner using parallel domain decomposition, and node packing effects of modern processor architecture.

Preconditioner, Nonlinear, Porous media, Multiphas↗

DOE OSTI2014

Thermal conductivity of high performance carbon nanotube yarn-like fibers

In the present paper, we present results of thermal conductivity measurements in free standing carbon nanotube (CNT) yarn-like fibers. The measurements are made using a T-type experimental configuration utilizing a Wollaston-wire hot probe inside a scanning electron microscope. In this technique, a suspended platinum wire is used both as a heater and a thermal sensor. A low frequency alternating current source is used to heat the probe wire while the third harmonic voltage across the wire is measured by a lock-in amplifier. The conductivity is deduced from an analytical model that relates the drop in the spatially averaged temperature of the wire to that of the sample. The average thermal conductivity of the neat CNT fibers and the CNT –polymer composite fibers is found to be 448 W/m-K and 225 W/m-K, respectively. These values for conductivity are amongst the highest measured for CNT yarn-like fibers fabricated using a dry spinning process from vertically aligned CNT arrays. The enhancement in thermal conductivity is understood to be due to an increase in the CNT fiber elastic stiffness during the draw and twist operations, lower CNT thermal contact resistance due to increase in CNT contact area, and better alignment of the CNT fibrils along the length of the fiber.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1999

Centrosome and microtubule instability in aging Drosophila cells

Several cytoskeletal changes are associated with aging which includes alterations in muscle structure leading to muscular atrophy, and weakening of the microtubule network which affects cellular secretion and maintenance of cell shape. Weakening of the microtubule network during meiosis in aging oocytes can result in aneuploidy or trisomic zygotes with increasing maternal age. Imbalances of cytoskeletal organization can lead to disease such as Alzheimer's, muscular disorders, and cancer. Because many cytoskeletal diseases are related to age we investigated the effects of aging on microtubule organization in cell cultures of the Drosophila cell model system (Schneider S-1 and Kc23 cell lines). This cell model is increasingly being used as an alternative system to mammalian cell cultures. Drosophila cells are amenable to genetic manipulations and can be used to identify and manipulate genes which are involved in the aging processes. Immunofluorescence, scanning, and transmission electron microscopy were employed for the analysis of microtubule organizing centers (centrosomes) and microtubules at various times after subculturing cells in fresh medium. Our results reveal that centrosomes and the microtubule network becomes significantly affected in aging cells after 5 days of subculture. At 5-14 days of subculture, 1% abnormal out of 3% mitoses were noted which were clearly distinguishable from freshly subcultured control cells in which 3% of cells undergo normal mitosis with bipolar configurations. Microtubules are also affected in the midbody during cell division. The midbody in aging cells becomes up to 10 times longer when compared with midbodies in freshly subcultured cells. During interphase, microtubules are often disrupted and disorganized, which may indicate improper function related to transport of cell organelles along microtubules. These results are likely to help explain some cytoskeletal disorders and diseases related to aging.

Non-NASA Center↗

NASA NTRS1982

Active region coronal evolution

Scaling relations between coronal base pressure and longitudinal photospheric magnetic field strength are tested for the case of a single active region observed for five solar rotations from Skylab. The evolution of measureable quantities, such as coronal thermal energy content, total longitudinal photospheric magnetic flux, region scale size, and peak energy density, is traced throughout the five rotations observed. The theoretically derived scaling law of Golub et al. (1980) is found to provide an acceptable fit to the data throughout the entire evolutionary history of the region from an age of about 3 days to the fully evolved state in which the mature active region merges into the general large-scale structure of the quiet corona. An alternative scaling law obtained by including the results of Galeev et al. (1981), however, is found to provide a somewhat better fit to the data. The study is seen as providing additional justification for the belief that magnetic field-related heating is the operative mechanism in the solar corona.

Golub, L.↗

DOE OSTI2021

Achieving industrial ammonia synthesis rates at near-ambient conditions through modified scaling relations on a confined dual site

The production of ammonia through the Haber–Bosch process is regarded as one of the most important inventions of the 20th century. Despite significant efforts in optimizing the process, it still consumes 1 to 2% of the worldwide annual energy for the high working temperatures and pressures. The design of a catalyst with a high activity at milder conditions represents another challenge for this reaction. Herein, we combine density functional theory and microkinetic modeling to illustrate a strategy to facilitate low-temperature and -pressure ammonia synthesis through modified energy-scaling relationships using a confined dual site. Our results suggest that an ammonia synthesis rate two to three orders of magnitude higher than the commercial Ru catalyst can be achieved under the same reaction conditions with the introduction of confinement. Such strategies will open pathways for the development of catalysts for the Haber–Bosch process that can operate at milder conditions and present more economically viable alternatives to current industrial solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗