Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Additives”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Evaluation of Additive Manufacturing for Stainless Steel Components

This collaboration between Oak Ridge National Laboratory and General Electric Company aimed to evaluate the mechanical properties, microstructure, and porosity of the additively manufactured 316L stainless steel by ORNL’s Renishaw AM250 machine for nuclear application. The program also evaluated the stress corrosion cracking and corrosion fatigue crack growth rate of the same material in high temperature water environments. Results show the properties of this material to be similar to the properties of 316L stainless steel fabricated additively with equipment from other manufacturers with slightly higher porosity. The stress corrosion crack growth rate is similar to that for wrought 316L stainless steel for an oxygenated high temperature water environment and slightly higher for a hydrogenated high temperature water environment. Optimized heat treatment of this material is expected to improve performance in high temperature water environments.

36 MATERIALS SCIENCE↗

Report on July 2015 Additional Protocol Coordinators Best Practices Workshop

After 10 years of implementation experience, the Office of Nonproliferation and Arms Control (NPAC) within the Department of Energy/National Nuclear Security Administration (DOE/NNSA) conducted the Additional Protocol (AP) Coordinators Best Practices Workshop at Oak Ridge National Laboratory from July 29-30, 2015. The goal of this workshop was to identify implementation best practices, lessons learned, and compliance challenges from the various Additional Protocol Coordinators (APCs) at each laboratory in the DOE/NNSA complex and associated sites. The workshop provided the opportunity for participants to share their insights and establish networks that APCs can utilize to continue to discuss challenges (new and old), identify best practices, and enhance communication and coordination for reporting multi-lab research projects during review activities. Workshop participants included DOE/NNSA HQ, laboratory and site APCs, seasoned experts, members of the original implementation outreach team, and Field Element and site security representatives.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Characterization of the Tribological Behavior of Graphene-Based Additives

XG-supplied nanocrystalline additives were extensively tested for friction and wear behavior. A technique for investigating the stability of additives was developed, and a report covered filtration and centrifugation methods for settling and filterable content. Friction and wear trends in partially and fully formulated oils were reported. Particle size analysis was performed and reported.

36 MATERIALS SCIENCE↗

ORNL-GM: Development of Ionic Liquid-Additized, GF-5/6 Compatible Low-Viscosity Oils for Automotive Engine and Rear Axle Lubrication for 4% Improved Fuel Economy

The overall objective of this project are as follows: Further develop ionic liquid (IL)-additized lowviscosity engine oils meeting the GF-5/6 specifications and possessing superior lubricating characteristics; Expand the IL additive technology to rear axle lubricants; and Seek a combined improvement in the vehicle fuel economy

10 SYNTHETIC FUELS↗

Ni and Cr addition to alloy waste forms to reduce radionuclide environmental releases

Reference alloy waste forms (RAW) were fabricated and underwent hybrid corrosion/immersion testing to parameterize the ANL analytical oxidative-dissolution model to enable the calculation of fractional release rates and to determine the effectiveness of Ni and Cr trim additions in reducing release rates of radionuclide surrogates. Figure 1 shows the prototypical multiphase microstructure of the alloys with each phase type contributing about equally to the exposed surface area. The waste forms tested at SRNL were variations of the RAW-6 formulation that uses HT9 as the main alloy component, and are meant to enable evaluation of the impact of Ni and Cr trim additions on the release rates of actinides and Tc-99. The test solutions were deaerated alkaline and acidic brines, ranging in pH 3 to pH 10, representing potential repositories with those conditions. The testing approach consisted of 4 major steps; 1) bare surface corrosion measurements at pH values of 3, 5, 8, and 10, 2) hybrid potentiostatic hold/exposure measurements at pH 3, 3) measurement of radionuclide concentrations and relations to anodic current from potentiostatic holds, and 4) identification of corroding phases using SEM/EDS of electrodes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Additive Manufacturing of Dense Hexagonal Boron Nitride Objects

The feasibility of manufacturing hexagonal boron nitride objects via additive manufacturing techniques was investigated. It was demonstrated that it is possible to hot-extrude thermoplastic filaments containing uniformly distributed boron nitride particles with a volume concentration as high as 60% and that these thermoplastic filaments can be used as feedstock for 3D-printing objects using a fused deposition system. Objects 3D-printed by fused deposition were subsequently sintered at high temperature to obtain dense ceramic products. In a parallel study the behavior of hexagonal boron nitride in aqueous solutions was investigated. It was shown that the addition of a cationic dispersant to an azeotrope enabled the formulation of slurries with a volume concentration of boron nitride as high as 33%. Although these slurries exhibited complex rheological behavior, the results from this study are encouraging and provide a pathway for manufacturing hexagonal boron nitride objects via robocasting.

36 MATERIALS SCIENCE↗

Additive Manufacturing for Low Volume Bearings

ORNL worked with the Schaeffler Group USA to explore additive manufacturing techniques that might be appropriate for prototyping of bearing cages. Multiple additive manufacturing techniques were investigated, including e-beam, binder jet and multiple laser based processes. The binder jet process worked best for the thin, detailed cages printed.

36 MATERIALS SCIENCE↗

The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

36 MATERIALS SCIENCE↗

Additive Manufacturing of Molds for Fabrication of Insulated Concrete Block

Oak Ridge National Laboratory (ORNL) worked with concrete block manufacturer, NRG Insulated Block, to demonstrate additive manufacturing of a multi-component block mold for its line of insulated blocks. Solid models of the mold parts were constructed from existing two-dimensional drawings, and the parts were fabricated on a Stratasys Fortus 900 using ULTEM™ 9085. Block mold parts were delivered to NRG and installed on one of their fabrication lines. While form and fit were acceptable, the blocks made from the molds collapsed when extruded from the printed molds during NRG’s testing. However, the project demonstrated significant time and cost reductions and achieving proper functionality through the use of different additive manufacturing techniques.

42 ENGINEERING↗

Hybrid Ionic-Nano-Additives for Engine Lubrication to Improve Fuel Efficiency

We developed a new class of hybrid organic-inorganic/metallic nanoparticles (NPs) as additives for polyalphaolefin (PAO) for friction and wear reduction to improve engine energy efficiency. The hybrid additives were synthesized by using polymers, ionic liquid (IL)-containing polymers, organic ligands, or ILs to functionalize NPs. The tribological properties of these hybrid NPs or mixtures of NPs and ILs were studied by high contact stress ball-on-flat reciprocating sliding tests at 100°C. Significant reductions in friction and wear were achieved compared to PAO base oil. The lubrication mechanisms were elucidated by both experimental and simulation studies.

36 MATERIALS SCIENCE↗

Feasibility of Using Additive Manufacturing to Produce Automotive Tooling

Oak Ridge National Laboratory’s (ORNL) Manufacturing Demonstration Facility (MDF) worked with Diversified Tooling Group (DTG) in phase I of this technical collaboration to determine the feasibility of using additive manufacturing to produce automotive tooling using polymer Big Area Additive Manufacturing (BAAM) systems and will potentially work with DTG in phase II on metal BAAM systems. The following phase I goals in polymer BAAM were met: a polymer sheet metal check fixture and a polymer foundry casting pattern were completed and shipped to DTG.

36 MATERIALS SCIENCE↗

Benchscale Evaluation of Nanodiamond Oil Additives

This CRADA between Cool-X and ORNL was to investigate the impact of diamond nanoparticles as diesel engine oil additives on lubricating behavior and gain fundamental understanding of the friction and wear reduction mechanisms. Systematic tribological bench tests were used for evaluating the Cool-X diamond nanoparticles (ND) as candidate diesel engine oil additives, and surface characterization was carried out to reveal the friction reduction mechanisms. No significant micro-rolling effect or increased oil pressure-viscosity coefficient was observed. Instead, a faster running-in and moderate friction reduction were achieved by the ND in tests of used diesel engine components, which was attributed to the polishing effect. ND agglomeration seemed to a problem and could significantly impair the functionality and future research is needed to seek the mitigation.

33 ADVANCED PROPULSION SYSTEMS↗

Tensile and Microstructure Characterization of SNS Target Swirl Bubblers Fabricated by Additive Manufacturing

During operation the mercury facing surfaces of the Spallation Neutron Source target vessel are damaged by cavitation-induced erosion. One option to decrease the erosion damage to the SNS target vessel surfaces is to decrease the intensity of the pressure waves using small bubble mitigation. Injection of small diameter helium bubbles into mercury has been shown in decrease the intensity of proton-induced pressure waves and mitigate erosion damage to mercury/container interface surfaces. Several bubbler designs have been evaluated for implementation in the SNS target. One promising bubbler design is called a swirl bubbler, which is capable of producing a high density of very small diameter helium bubbles in flowing mercury. Due to the complexity of the swirl bubbler design and the geometric restrictions of conventional machining processes, additive manufacturing was considered for fabrication. But there was uncertainty with the mechanical properties of bubblers fabricated with additive manufacturing. A series of experiments were designed to characterize the tensile properties and microstructure of swirl bubblers fabricated using selective laser melting (SLM), both before and after consolidation via hot isostatic pressing (HIPing). This report summarizes the tensile and microstructural characterization of HIPed and non-HIPed swirl bubblers produced via the SLM process. The results show that the as-fabricated material contained appreciable porosity, lack-of-fusion defects, and inconsistent tensile properties with essentially zero ductility. But after a HIPing treatment the microstructure became fully consolidated, and the tensile properties surpassed the requirements specified in the material standard for steel-mill produced 316L plate material used to fabricate the SNS target vessel. While further testing is recommended to evaluate the material’s susceptibility to fatigue fracture, these results indicate 316L bubbler assemblies produced SLM and HIPed are promising candidates for implementation in a future SNS target module.

36 MATERIALS SCIENCE↗

Additive Manufacturing Using Epoxy and Anhydride Curatives

ORNL worked with Dixie Chemical Company to develop epoxy material solutions with anhydride curatives printable on a large-scale printer. Rheological evaluation showed that the addition of high surface area fillers produced a stable yield-stress fluid that is capable of being used in extrusion deposition additive manufacturing. The resulting printed structures have the necessary mechanical and thermomechanical performance to be used in elevated temperature tooling for various composites processing, such as an autoclave.

36 MATERIALS SCIENCE↗

Evaluation of Radiation Proofing Polyethylene: Use of Oxygen Scavenging Additives

The degradation of polyethylene (PE) from radiation sources with both thermal and nuclear interactions show sensitivities towards oxygen and air. Characterization of the sensitivities in both inert and oxygenated atmospheres can be characterized by thermogravimetric analysis (TGA). Under argon, the thermal degradation of PE follows a random scission pathway that has activation energy of ~229 kJ mol -1 . The activation energy of PE is reduced by ~30% when 1% air is added to the inert argon atmosphere, illustrating the impact of oxygen on the degradation of PE. This effort seeks to diminish degradation of PE waste containment bags and extend their lifetime, thereby, reducing the cost and worker exposure risk. The project evaluated the use of oxygen scavenger nanoparticles to mitigate the deteriorating effects of oxygen on polymer physical properties and reduce polymer degradation. The thermal degradation of PE composites with various additives were tested and two additives showed promising results approaching the activation energy of pristine PE in an inert atmosphere. This activity was sponsored by the EM Office of Technology Development through SRNL’s Technical Task Plan SR091701.

36 MATERIALS SCIENCE↗

Additive Manufacturing of Polyurethane Foam Mold Tooling

In this DOE AMO Technical Collaboration (MDF-TC-2017-078), ORNL partnered with Whirlpool Corporation. to develop low-cost prototype tooling for the manufacturing of refrigerators. Techniques for producing watertight and high thermal-conductivity tools were developed and evaluated. In addition, additive manufacturing systems at multiple volume and resolution scales were evaluated for performance, resolution, and cost for the intended application.

36 MATERIALS SCIENCE↗

Conceptual Design for a Mobile Adaptive Additive Manufacturing In-situ Diagnostic End-Station (MAdAM)

With the importance of additive manufacturing (AM) growing, researchers are interested in characterizing the dynamics of metal solidification in AM processes and its impact on part structure and performance. In-situ AM experiments at Xray facilities allow for the temporal study of these systems but require many different connections, interfaces, and equipment which can take a considerable amount of time and effort to set up, reducing the user’s useful beamtime. It is essential to provide the means for an experiment to achieve the relevant thermal boundary conditions and control the cooling rates to replicate the conditions of the manufacturing process. A team effort defined the overall capabilities and requirements for a mobile adaptive additive manufacturing (MAdAM) in-situ diagnostic end-station that can be used at X-ray facilities. Further, specific details of the key elements of the system are developed. Further iteration and development of details will be needed; the path forward and next steps for such a project is described.

36 MATERIALS SCIENCE↗

Considerations for Application of Additive Manufacturing to Nuclear Reactor Core Components

The following chapter represents the current state of literature on the selected additive manufacturing technologies and was written with an emphasis on quality control and material performance repeatability. Research and standards published by government entities such as the National Institute of Standards and Technology (NIST) and Department of Energy (DOE) have been included where applicable. It is recommended that literature be reviewed, and new knowledge integrated no less frequently than every four years due to the rapid pace of advancements in additive manufacturing and associated industries. AM presents unique challenges in certification for NPP applications such as anisotropic material properties, porosity, underdeveloped process control feedback systems, and reproducibility. This chapter begins with an overview of the selected AM technologies, followed by a systematic review of literature to detail the fabrication process and difficulties with repeatably fabricating fully dense, geometrically accurate components with known material properties.

36 MATERIALS SCIENCE↗