Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accessibility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Constellation Study for Optimized Target Access and Coverage

We have performed a low earth orbiting satellite constellation design parameter space study to determine optimized constellations that satisfies mission goals while minimizing total system costs. Because this is a generic study, we developed a generalized set of mission requirements that would meet the needs of several different types of space missions. Figure of merit parameters were defined to help rank the different constellations under study. Instead of performing a full, multi-dimensional parameter space study, we instead focused on a few exemplar cases. For this generic mission, the baseline requirements were as follows: altitude: 700km, total number of satellites per constellation: 40-100, world coverage: 100% coverage or maximize coverage of populated latitudes, polar coverage: some but not 100% required, multi-ball observations: 2- & 3-ball coverage desired, and target coverage: full coverage or up to 5 minute observing gap for 1-ball coverage at all latitudes. For added conservatism, the minimum target observing elevation angle was 10-degrees and the minimum acceptable time on target was 1 minute. We also only performed the calculations for a Walker constellation (defined as M/M/IP or #planes/# satellites per plane/interplane satellite spacing) instead of “streets-of-coverage” constellations, which at high inclinations can satisfy coverage requirements with slightly fewer satellites.

47 OTHER INSTRUMENTATION↗

Access to a New Plasma Edge State with High Density and Pressures using Quiescent H-mode

A path to a new high performance regime has been discovered in tokamaks that could improve the attractiveness of a fusion reactor. Experiments on DIII-D using a quiescent H-mode edge have navigated a valley of improved edge peeling-ballooning stability that opens up with strong plasma shaping at high density, leading to a doubling of the edge pressure over standard edge localized mode (ELM)ing H-mode at these parameters. The thermal energy confinement time increases both as a result of the increased pedestal height and improvements in the core transport and reduced low-k turbulence. Calculations of the pedestal height and width as a function of density using constraints imposed by peeling-ballooning and kinetic-ballooning theory are in quantitative agreement with the measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

EPA GHG Certification of Medium- and Heavy-Duty Vehicles: Development of Road Grade Profiles Representative of US Controlled Access Highways

This report includes a detailed comparison of the TomTom national road grade database relative to a local road grade dataset generated by Southwest Research Institute and a national elevation dataset publically available from the U.S. Geological Survey. This analysis concluded that the TomTom national road grade database was a suitable source of road grade data for purposes of this study.

54 ENVIRONMENTAL SCIENCES↗

Solar Access to Public Capital (SAPC) Working Group: Best Practices in Commercial and Industrial (C&I) Solar Photovoltaic System Installation; Period of Performance: November 28, 2014-September 1, 2015

This Best Practices in Commercial and Industrial Solar Photovoltaic System Installation Guide is the second of a series of guides designed to standardize and improve solar asset transparency for investors and rating agencies, provide an industry framework for quality management, and reduce transaction costs in the solar asset securitization process. The Best Practices in C&I PV System Installation Guide is intended to outline the minimum requirements for commercial and industrial solar project developments. Adherence to the guide is voluntary. Providers that adhere to the guide are responsible for self-certifying that they have fulfilled the guide requirements. Investors and rating agencies should verify compliance.

14 SOLAR ENERGY↗

External Access to the TREXR Database

The DOE Advanced Reactor Technology program has supported knowledge preservation efforts to recover and preserve fuel data from the US sodium cooled fast reactor (SFR) program. Efforts have focused on establishing databases of experimental data gene rated during the Integral Fast Reactor program (at EBR-II, FFTF, and TREAT) as well as during related out-of-pile examinations. The information in these databases is essential to support further development and licensing activities of advanced fast reactor designs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Making Compiler-Based Tools Accessible Online

Compiler-based tools are widely used to analyze and optimize source codes for many purposes, including extracting insights about applications’ properties or restructuring code for better performance. However, using compiler-based tools is often difficult due to tedious and error-prone steps to configure and install such tools on various machines. In this paper, we describe a solution to use CGI + Bash to expose compilerbased tools to a web page so users can directly use these tools without installing them.

97 MATHEMATICS AND COMPUTING↗

Publicly Accessible Charging Site Host Recruitment During The EV Project

Several assumptions were established at the start of The EV Project. One of the assumptions upon which the Project was based was that plug-in electric vehicle (PEV) drivers would require some form of charging infrastructure away from their residences. The basic need for infrastructure outside the home was assumed to be a key foundation of future EV growth. This assumption was based on surveys conducted as part of the EV Project1, on previous experience of The EV Project management team with charging infrastructure deployment and use, and on a strong desire by Nissan (which was the initial PEV partner of The EV Project), to have visible away-from-home charging infrastructure to support vehicle sales. It was assumed that PEV drivers would have range anxiety and have an expectation that charging infrastructure will be there for their use.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Storage Systems and Input/Output: Organizing, Storing, and Accessing Data for Scientific Discovery. Report for the DOE ASCR Workshop on Storage Systems and I/O. [Full Workshop Report]

In September, 2018, the Department of Energy, Office of Science, Advanced Scientific Computing Research Program convened a workshop to identify key challenges and define research directions that will advance the field of storage systems and I/O over the next 5–7 years. The workshop concluded that addressing these combined challenges and opportunities requires tools and techniques that greatly extend traditional approaches and require new research directions. Key research opportunities were identified.

97 MATHEMATICS AND COMPUTING↗

Storage Systems and Input/Output: Organizing, Storing, and Accessing Data for Scientific Discovery. Report for the DOE ASCR Workshop on Storage Systems and I/O. [Summary Brief]

In September, 2018, the Department of Energy, Office of Science, Advanced Scientific Computing Research Program convened a workshop to identify key challenges and define research directions that will advance the field of storage systems and I/O over the next 5-7 years.The workshop concluded that addressing these combined challenges and opportunities requires tools and techniques that greatly extend traditional approaches and require new research directions. Key research opportunities were identified. This summary brief highlights three areas: The Impact of Storage and I/O, Research Opportunities, and, A new and productive Storage and I/O Environment. The full report from the workshop can be viewed at DOI: 10.2172/1491994.

97 MATHEMATICS AND COMPUTING↗

Making Compiler-Based Tools Accessible Online

Compiler-based tools are widely used to analyze and optimize source codes for many purposes, including extracting insights about applications’ properties or restructuring code for better performance. However, using compiler-based tools is often difficult due to tedious and error-prone steps to configure and install such tools on various machines. In this paper, we describe a solution to use CGI + Bash to expose compilerbased tools to a web page so users can directly use these tools without installing them.

97 MATHEMATICS AND COMPUTING↗

Highly-Accessible Catalysts for Durable High-Power Performance (Final Technical Report)

Reduction of costly Pt usage in proton exchange membrane fuel cell (PEMFC) electrodes is one of the major challenges towards development and commercialization of fuel cell electric vehicles (FCEV). However, reducing the Pt loading results in increasing local mass transport fluxes, and eventual performance loss, especially at high power. In this project, a team of 4 universities, 2 companies, and a national lab came together to develop fuel cell catalysts and electrodes with high performance and durability. The were several key concepts addressed in this project. The first concept is to develop a carbon support that possess internal porosity which are believed to enhance kinetic activity of the catalysts, and yet the pore morphology allows for good reactant transport. The second concept is to improve the Pt-electrolyte interface in hope to reduce the local transport resistance. This was done by using new ionomers and ionic liquids. The last concept involves improving the catalyst stability by introducing Pt alloy catalyst with ordered intermetallic phase. The collaborative platform provided by DOE funding enabled development of a highly active and durable catalyst with performance that exceeds previous catalysts and meets the DOE targets for light duty vehicle application.

08 HYDROGEN↗

Guide to Data Access and Utility Customer Confidentiality

This report explains the difference between whole-building energy usage data requests and other types of data requests utilities may receive. It outlines utility best practices for providing energy consumption information to building owners while respecting the confidentiality of utility customers.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Affordable and Accessible Solar for All: Barriers, Solutions, and On-Site Adoption Potential

Solar energy technologies can be used as part of a suite of tools to reduce the energy burden of low-income customers, but to date, low- and moderate-income (LMI) customers have not adopted solar at the same rate as other income groups. This paper summarizes the barriers of LMI solar adoption related to finance and funding, community engagement, site suitability, policy and regulatory, and resilience and recovery and discusses existing and potential future solutions to address these barriers. In addition, we model future LMI on-site solar adoption, using the National Renewable Energy Laboratory's (NREL's) dGen model. We model future scenarios assuming no changes in the current LMI solar policy and program environment, and we add two incentives to low-income households for adopting solar: a $\$$3,000 incentive and a full incentive (i.e., the full cost of a PV system). While we model a financial incentive, this dollar reduction in cost could also come from other efforts, for example, reductions in solar soft costs. We find that by 2050, 48-49% of LMI households adopt solar, resulting in $\$$69- $\$$101 billion in first year utility bill savings to these consumers.

14 SOLAR ENERGY↗