Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Microscopic and mesoscopic structural features of an activated carbon sample, prepared from sorghum via activation by phosphoric acid

Graphical abstract: Display Omitted Highlights: ► Preparation of a new activated carbon sample from sorghum. ► Characterization by adsorption/desorption methods. ► Determination of the structure by synchrotron X-ray diffraction. ► The sample is amorphous and contains distorted graphene fragments. ► A characteristic nanoscale distance is established from the radial distribution function. -- Abstract: An acidic chemical activation procedure has been used for preparing activated carbon with a surface area exceeding 1000 m{sup 2}/g from sorghum. In order to reveal structural features, synchrotron X-ray diffraction measurements have been performed. The structure of the material has been characterized by the total scattering structure factor and the radial distribution function describing short-range arrangement of atoms at distances of the order of a few atomic diameters as well as correlations at a longer scale, of the order of nanometers. The atomic arrangement has been found to be consistent with that of amorphous graphite-like carbon. As far as the mesoscopic structure is concerned, the presence of a characteristic distance is suggested on the basis of the clear nanometer scale oscillations of the radial distribution function, which distance may be assigned as the mesopore size in the material. It is suggested that the approach devized here may later be applied routinely for other activated carbon samples, too, for characterizing atomic and nanoscale order simultaneously.

36 MATERIALS SCIENCE↗

Synthesis of mesoporous TS-1 using a hybrid SiO{sub 2}–TiO{sub 2} xerogel for catalytic oxidative desulfurization

Graphical abstract: Display Omitted Highlights: ► Meso-TS-1 catalyst was synthesized using a SiO{sub 2}–TiO{sub 2} xerogel with an organosilane precursor. ► Hierarchical pore structure was confirmed by characterization of the materials. ► Catalytic activity was tested using oxidative desulfurization of the model sulfur compounds. ► Meso-TS-1 demonstrated significantly improved catalytic activity than TS-1. -- Abstract: Mesoporous TS-1 (M-TS-1) was synthesized using a hybrid SiO{sub 2}–TiO{sub 2} xerogel combined with an organosilane precursor. Prepared samples were characterized by XRD, UV–vis spectroscopy, SEM, and N{sub 2} adsorption–desorption measurement. M-TS-1, prepared in 2 days, showed high crystallinity and the best textural properties among the samples. The N{sub 2} adsorption–desorption isotherms of M-TS-1 exhibited a hysteresis loop at pressure higher than P/P{sub 0} = 0.4, clearly indicating the existence of mesopores. M-TS-1 has significantly larger mesopore volume (0.48 cm{sup 3}/g) than that of conventional TS-1 (0.07 cm{sup 3}/g), and showed a narrow peak centered at ca. 6.3 nm. In the oxidative desulfurization reaction, M-TS-1 was more active than conventional TS-1 at the same Ti-loading; M-TS-1 produced a dibenzothiophene (DBT) conversion of 96%, whereas conventional TS-1 produced a final DBT conversion of 5.6% after a reaction time of 180 min. Oxidative desulfurization over TS-1 was influenced both by electron density and steric hindrance in the sulfur compounds tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tm{sup 3+}-sensitized up- and down-conversions in nano-structured oxyfluoride glass ceramics

Graphical abstract: Display Omitted Highlights: ► UC and DC are achieved in a single-ion sensitized phosphor for PV applications. ► The most intense fractions of AM 1.5G spectrum below/above c-Si bandgap are absorbed. ► The converted photons match the optimal spectral response of c-Si. -- Abstract: Tm{sup 3+}-sensitized up-conversion and down-conversion are studied in transparent glass ceramics embedded with β-YF{sub 3} nanocrystals. Upon excitation at 1220 nm, where crystalline silicon (c-Si) solar cells no longer absorb, the sub-bandgap photons could be converted to the higher-energy ones via up-conversion. In addition, under excitation at 468 nm (a wavelength close to the peak in the air-mass 1.5 global solar spectrum), one blue photon might be split in up to two near-infrared ones via down-conversion. In both cases, the frequency-converted photons match the spectral response of c-Si solar cell well. Hopefully, the investigated luminescent materials may act as the spectral conversion layers to reduce the sub-bandgap transmission and charge carrier thermalization losses of c-Si solar cells, and in turn, enhance the energy efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural dependence of piezoelectric, dielectric and ferroelectric properties of K{sub 0.5}Na{sub 0.5}(Nb{sub 1−2x/5}Cu{sub x})O{sub 3} lead-free ceramics with high Q{sub m}

Graphical abstract: Display Omitted Highlights: ► Double hysteresis loops were observed in K{sub 0.5}Na{sub 0.5}(Nb{sub 1−2x/5}Cu{sub x})O{sub 3}. ► Cu substitution caused structural discontinuity in KNNC. ► Dimeric defect complex (Cu{sup ‴}{sub Nb}–V{sub O}··){sup ′} with a dipole moment was formed in KNNC. -- Abstract: (K{sub 0.5}Na{sub 0.5})(Nb{sub 1−2x/5}Cu{sub x})O{sub 3} (abbreviated as KNNC, x = 0–2%) lead-free ceramics were synthetized by the solid state solution method. Pure perovskite phase with orthorhombic symmetry was observed. The evolution of the structure of KNNC was examined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman scattering spectra techniques. Our results revealed that, defect dipoles (Cu{sup ‴}{sub Nb}–V{sub O}··){sup ′} were formed and provided a restoring force to reverse the switched polarization, which resulted in double P–E hysteresis loops in KNNC with Cu doping at x = 0.75% and 1%. However, non-polar defect complex (V{sub O}··–Cu{sup ‴}{sub Nb}–V{sub O}··)· caused a lattice shrinkage and the observed square shaped P–E loops in KNNC ceramics under high doping levels (x > 1%).

36 MATERIALS SCIENCE↗

Spectroscopic and magnetic properties of Mn doped GaN epitaxial films grown by plasma assisted molecular beam epitaxy

Graphical abstract: We report here that micro-Raman scattering spectrum for Mn doped GaN thin film has displayed a new peak manifested at 578 cm{sup −1}, by which it is attributed to interior LVM originated by the incorporation of Mn ions in place of Ga sites. Mn doped GaN thin film also showed the typical negative magnetoresistance up to ∼50 K, revealing that the film showed magnetic ordering of spins below 50 K. Display Omitted Highlights: ► GaN and Mn doped GaN single phase wurtzite structures grown by PAMBE. ► The phase purity of the epilayers investigated by HRXRD, HRSEM and EDX. ► The red shift in near band edge emission has been observed using micro-PL. ► A new peak related LVM at 578 cm{sup −1} in micro-Raman scattering measurements confirmed Mn doped into GaN. ► Negative-magnetoresistance investigations have showed that the film has T{sub c} < 50 K. -- Abstract: Spectroscopic and magnetic properties of Mn doped GaN, and GaN epitaxial films have been investigated by employing micro-photoluminescence, micro-Raman, and temperature dependent magneto-resistance measurements. The HR-XRD profiles have shown that the epitaxial films are in hexagonal wurtzite structures. Morphology and composition of the films have been examined by field emission scanning electron microscopy, and energy-dispersive X-ray analysis. Micro-photoluminescence spectrum displayed a dominant near band edge emission at 362 nm, which is assigned to near band edge transition within the hexagonal structure of GaN. Raman scattering profiles showed a new vibrational mode at 578 cm{sup −1}, which is attributed to the vacancy-related local vibrational mode of Mn occupying the Ga site. Temperature dependent negative magnetoresistance measurements provide a direct evidence of magnetic ordering below 50 K for the Mn doped GaN thin film.

36 MATERIALS SCIENCE↗

Effects of lanthanum dopants on the Curie–Weiss and the local order behaviors for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} relaxor ferroelectrics

Graphical abstract: The local order as a function of temperature by using (a) the spin-glass model and (b) the modified-Landau theory for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics with different amounts of lanthanum dopants. Display Omitted Highlights: ► The effects of La are investigated for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. ► La can change their dielectric properties and ordering state. ► The spin glassy behaviors and the freezing process are also affected by La. ► The response mechanisms of La are proposed for the local polarization behavior. -- Abstract: The effects of lanthanum dopants are investigated on the dielectric responses for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. According to the experimental data and fitting results, it is concluded that the dielectric characteristics are changed from a long-range-ordered (LRO) ferroelectric state to a short-range-ordered (SRO) relaxor by increasing the amounts of lanthanum dopants. Furthermore, the spin glassy behaviors and the freezing process of local polarizations are not only affected by the ordering degree of B-site cations but also affected by the defect polar pairs. Their response mechanisms are proposed that the growth of the 1:1 ordered domain Pb{sub 1−x}La{sub x}(Fe{sub 1/2}W{sub 1/2})O{sub 3} is impeded since its charge imbalance is enhanced by increasing the amounts of lanthanum dopants, and the defect polar pairs of lead, tungsten and oxygen vacancy are induced by the pyrochlore phase, PbWO{sub 4} or Pb{sub 0.99}La{sub 0.01}WO{sub 4}, when the amount of lanthanum dopants exceed 5 mol.%.

36 MATERIALS SCIENCE↗

Synthesis and visible light photocatalysis water splitting property of Cu-doped NaInS{sub 2} synthesized by a hydrothermal method

Graphical abstract: Display Omitted Highlights: ► Cu-doped NaInS{sub 2} powders were prepared by the solvethermal method. ► The samples were characterized by XRD, SEM, and DRS (diffuse reflection spectra). ► The effects of Cu doping ion on the photocatalytic activity were studied. ► The effects of Pt loading on the photocatalytic activity were investigated. -- Abstract: Copper-doped NaInS{sub 2} with hexagonal blocks morphology was prepared by a one-step hydrothermal method and the photocatalytic activity was investigated. The as-synthesized products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–vis spectroscopy. XRD patterns show that the Cu ions doping has no effect on the crystal structure of NaInS{sub 2}. UV–vis diffuse reflectance spectra show that the absorption wavelength of Cu-doped NaInS{sub 2} occurs red-shift which originated from Cu3d orbital forming impurity level. The photocatalytic activity was increased by Cu doping. The optimal doping amount of Cu{sup 2+} is 1.5 ml.

36 MATERIALS SCIENCE↗

Long range B-site cation ordering and Briet–Wigner–Fano line shape of A{sub 1g}-like Raman mode in Nd{sub 1−x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} microwave dielectric ceramics

Graphical abstract: Display Omitted Highlights: ► Q × f of Nd{sub 1–x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} are correlated with B-site cation ordering (LRO). ► Correlation between LRO and Γ of A{sub 1g}-like mode in Raman spectrum is observed. ► Reason for asymmetry in A{sub 1g}-like Raman mode in these materials is revealed. ► Briet–Wigner–Fano resonance is confirmed with temperature variation in Raman spectra. -- Abstract: Nd{sub 1−x}Sm{sub x}(Mg{sub 0.5}Ti{sub 0.5})O{sub 3} (x = 0.0–1.0) samples were prepared by solid-state reaction method. Rietveld refinement of X-ray diffraction data was done using P2{sub 1}/n space group with monoclinic symmetry, which supports 1:1 B-site cation ordering. Long range ordering (LRO) parameter decreased up to x = 0.5 and then found to increase with further increase in Sm concentration. The A{sub 1g}-like mode in Raman spectra was observed to possess Briet–Wigner–Fano line shape. The variation in obtained line width of the A{sub 1g}-like mode supported LRO. Microwave dielectric characteristics such as dielectric constant (ε{sub r}), quality factor (Q) and temperature coefficient of resonant frequency (τ{sub f}) were measured in the range of 7–9 GHz. ε{sub r} decreased from 26.5 to 24.9 and τ{sub f} become less negative from −58 ppm/°C to −36 ppm/°C with increase in Sm concentration. Q × f decreased from 47,500 GHz (for x = 0) to 39,800 GHz (for x = 0.5) and then increased to 44,600 GHz (for x = 1).

36 MATERIALS SCIENCE↗

Removal of dissolved humic acid from water by photocatalytic oxidation using a silver orthophosphate semiconductor

Graphical abstract: Display Omitted Highlights: ► The photocatalytic property of a silver orthophosphate (Ag{sub 3}PO{sub 4}) was investigated for humic acid degradation. ► The Ag{sub 3}PO{sub 4} shows high photocatalytic activity under visible light. ► The photocatalytic activity was greatly improved by employing the precipitation method. -- Abstract: In order to remove dissolved organic matter such as humic acid from water, a silver orthophosphate (Ag{sub 3}PO{sub 4}) was newly employed as a heterogeneous photocatalyst. Here, Ag{sub 3}PO{sub 4} was prepared by simple ion-exchange and precipitation methods, and the physico-chemical properties were characterized by X-ray diffraction, ultraviolet–visible diffuse reflectance spectroscopy, scanning electron microscopy, particle distribution measurements and Brunauer–Emmett–Teller (BET) analysis. The degradation of humic acid was faster over Ag{sub 3}PO{sub 4} catalyst than over conventional TiO{sub 2} (P-25). The total photocatalytic properties were improved by employing not an ion-exchange method but a precipitation method; humic acid degradation was performed with a removal ratio of dissolved organic carbon of 75% under visible light (λ = 451 nm) for 2-h irradiation.

36 MATERIALS SCIENCE↗

Synchronistic preparation of fibre-like SiC and cubic-ZrO{sub 2}/SiC composite from zircon via carbothermal reduction process

Graphical abstract: Display Omitted Highlights: ► Zircon carbothermal reduction was carried out in a tailor-made device at high-temperature air atmosphere. ► Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were obtained synchronically. ► Zirconium and silicon in zircon ore was initial separated. ► [SiO{sub 4}] was mutated to fibre-like SiC, while [ZrO{sub 8}] was transformed to cubic ZrO{sub 2}. ► The SiC were surprisingly enriched in the reducing atmosphere charred coal particles layers by gas–solid reaction. -- Abstract: Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were prepared respectively from zircon with yttrium oxide addition via carbothermal reduction process at 1600 °C for 4 h in an air atmosphere furnace, where the green samples were immerged in charred coal particles inside a high-temperature enclosed corundum crucible. The reaction products were characterized by XRD, XRF, XPS and SEM. The results indicate that ZrO{sub 2} in the products was mainly existed in the form of cubic phase. The reacted samples mainly contain cubic ZrO{sub 2}, β-SiC and trace amounts of zircon, with the SiC accounting for 14.8 wt%. Furthermore, a large quantity of fibre-like SiC was surprisingly found to concentrate in the charred coal particles layers around the samples. This study obtains fibre-like SiC and cubic-ZrO{sub 2}/SiC composite synchronically from zircon via carbothermal reduction process, which also bring a value-added high-performance application for natural zircon.

36 MATERIALS SCIENCE↗

Anisotropic silver nanoparticles as filler for the formation of hybrid nanocomposites

Graphical abstract: Display Omitted Highlights: ► Prismatic and plate-like Ag nanoparticles were used as a precursors for preparation Ag/poly(vinyl alcohol) nanocomposite films. ► Results showed that the degree of crystallinity of the polymer decreases with Ag nanoparticles content. ► The presence of Ag nanoparticles in PVA induces higher thermo-oxidative stability with respect to PVA. -- Abstract: Prismatic and plate-like silver nanoparticles (Ag NPs) were synthesized according to the seed-mediated method. These particles were used as precursors for preparation of homogenous, transparent and colored Ag/poly(vinyl alcohol) (PVA) nanocomposite films with different concentrations of Ag by solution-casting technique. Optical and structural characterization of these nanocomposites includes UV–visible spectroscopy, X-ray diffraction (XRD), FTIR spectroscopy and SEM measurements. Further, the effect of embedded nanoparticles on the thermal properties of the PVA matrix was studied. The value of the glass transition temperature of polymer is found to increase after embedding Ag NPs. Comparison of thermal properties of pure PVA and nanocomposite films showed that the thermo-oxidative stability of polymer slightly increased in the presence of Ag NPs. Furthermore, the effect of the Ag NPs on the crystallinity of polymer was also observed.

36 MATERIALS SCIENCE↗

Influences of urea–glycerol mixtures as mixed mesopore-controlling agents on tailoring physicochemical properties and photocatalytic H{sub 2} production activity of sol–gel-derived mesoporous-assembled TiO{sub 2} nanocrystals

Graphical abstract: Display Omitted Highlights: ► Mesoporous-assembled TiO{sub 2} nanocrystals were synthesized by modified sol–gel process. ► Urea–glycerol mixtures were applied as mixed mesopore-controlling agents. ► Urea and glycerol contents affected physicochemical properties of synthesized TiO{sub 2}. ► Photocatalytic H{sub 2} production activity also depended on urea and glycerol contents. ► 75 mol% urea and 25 mol% glycerol yielded the most photocatalytically active TiO{sub 2}. -- Abstract: In this work, the mesoporous-assembled TiO{sub 2} nanocrystal photocatalysts were successfully synthesized by a sol–gel process with the aid of urea–glycerol mixtures used as mixed mesopore-controlling agents. The photocatalytic activity of the synthesized mesoporous-assembled TiO{sub 2} nanocrystal photocatalysts was investigated for hydrogen production from the water splitting reaction using methanol as a hole scavenger under UV light irradiation. The synthesized TiO{sub 2} nanocrystal photocatalysts were systematically characterized by TG–DTA, N{sub 2} adsorption–desorption, SEM, high resolution TEM, and XRD analyses. The characterization results showed that the well-controlled contents of urea and glycerol in a urea–glycerol mixture at 75 mol% urea and 25 mol% glycerol resulted in not only the most highly porous network (i.e. the highest specific surface area and total pore volume, and the smallest mean mesopore diameter), but also the smallest crystallite size of the synthesized TiO{sub 2} nanocrystal photocatalyst. The photocatalytic reaction results, hence, revealed a much superior photocatalytic hydrogen production activity of the mesoporous-assembled TiO{sub 2} nanocrystal synthesized with 75 mol% urea and 25 mol% glycerol to the other synthesized TiO{sub 2} nanocrystals, also being much higher than those of the commercially available P-25 TiO{sub 2} and ST-01 TiO{sub 2} powders.

36 MATERIALS SCIENCE↗

Electrochemically synthesized visible light absorbing vertically aligned N-doped TiO{sub 2} nanotube array films

Graphical abstract: Display Omitted Highlights: ► Single step electrochemical synthesis of N-doped TiO{sub 2} nanotube array films. ► Effective substitutional N-doping achieved. ► Different N-concentrations were achieved by varying the N-precursor concentration in the electrolyte. ► Visible light absorption observed at high N-doping. -- Abstract: Visible light absorbing vertically aligned N-doped anatase nanotube array thin films were synthesized by anodizing Ti foils in ethylene glycol + NH{sub 4}F + water mixture containing urea as nitrogen source. Different nitrogen concentrations were achieved by varying the urea content in the electrolyte. The structure, morphology, composition and optical band gap of the nanotube arrays were determined by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and diffuse reflectance spectroscopy, respectively. The substitution of O{sup 2−} ions by N{sup 3−} ions in the anion sublattice as well as the formulae of the doped samples was confirmed from the results of XPS. The optical band gap of the nanotube arrays was found to decrease with N-concentration. The sample with the highest concentration corresponding to the formula TiO{sub 1.83}N{sub 0.14} showed two regions in the Tauc's plot indicating the presence of interband states.

36 MATERIALS SCIENCE↗

Liquid phase preparation and fluorescence of flake-liked NdF{sub 3} nanomaterials

Graphical abstract: Room-temperature emission spectra of NdF{sub 3} nanoflakes exhibit a strong luminescence emission peak at 402 nm when irradiated by an excitation wavelength of 250 nm. Display Omitted Highlights: ► NdF{sub 3} nanoflakes have been successfully prepared by a facile and repeatable liquid phase preparation. ► The action of oxalic acid in the reaction process was studied, showing important in the morphology of neodymium fluorides. ► The study on the fluorescent properties of flake-like NdF{sub 3} nanomaterials shows a strong emission peak at 402 nm by the excitation wavelength of 250 nm. -- Abstract: Neodymium fluoride nanoflakes were successfully prepared by a facile liquid phase preparation with Nd(NO{sub 3}){sub 3} and NaF as raw materials. In the process, oxalic acid acting as template agent was found to play important roles in the morphology of neodymium fluorides. The as-synthesized NdF{sub 3} nanoflakes were characterized by various techniques of X-ray diffraction (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectrometer instrument (EDS). The fluorescent properties of neodymium fluoride nanoflakes were investigated, showing a strong luminescence emission peak at 402 nm by the excitation wavelength of 250 nm.

36 MATERIALS SCIENCE↗

Thermal and structural stability of single- and multi-walled carbon nanotubes up to 1800 °C in Argon studied by Raman spectroscopy and transmission electron microscopy

Graphical abstract: Display Omitted Highlights: ► Structural stability of carbon nanotubes up to 1800 °C in Argon (∼0.05 MPa). ► Thorough TEM and Raman spectroscopy of as received and heat treated CNTs. ► Analyses on the extent of structural changes during high temperature exposure. ► Discussion on safe upper temperature limit for practical use of SWCNTs and MWCNTs. -- Abstract: Effect of high temperature exposure (up to 1800 °C) on morphology of single- and multi-walled carbon nanotubes in Argon atmosphere has been studied using Raman spectroscopy and transmission electron microscopy. Although, as received nanotubes contained irregular graphene layers and other structural defects, microscopic observations revealed that heat treatment in Argon reduced the defect density and helped proper alignment of graphene layers. Raman spectra of as received and heat treated nanotubes strongly reinforced the microscopic observations. While, D-band to G-band intensity ratio in Raman spectra of 1800 °C heat treated multiwalled nanotubes reduced by ∼43% over as received one, this ratio for heat treated singlewalled nanotubes was ∼27% lower than that of the untreated specimen. Present study suggested that although, multiwalled nanotubes were structurally stable up to 1800 °C in an inert atmosphere having only a few nano-scale defects, singlewalled nanotubes suffered considerable damage at 1800 °C due to much thinner dimension than the former.

36 MATERIALS SCIENCE↗

A simple way to synthesize well-dispersed Gd{sub 2}O{sub 3} nanoparticles onto reduced graphene oxide sheets

Graphical abstract: Display Omitted Highlights: ► A simple approach to obtain Gd{sub 2}O{sub 3} nanoparticles onto RGO sheets. ► Gd{sub 2}O{sub 3} nanoparticles could be bonded with RGO by the residual C-OH or COOH groups. ► The as-prepared Gd{sub 2}O{sub 3} nanoparticles are well-dispersed and in the size of 10–50 nm. -- Abstract: High quality and dispersible rare-earth oxides (RE{sub 2}O{sub 3}) nanocrystals have drawn great attention because of their potential applications in the optical, electrical and biological fields. Here, we demonstrated a simple approach for the production of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles onto the surface of reduced graphene oxide (RGO) sheets by the chemical and the subsequent thermal reduction reactions. The residual oxygen functionalities derived from the reduction of graphene oxide (GO) played an important role to complex Gd{sub 2}O{sub 3} nanoparticles with RGO sheets. And the as-synthesized Gd{sub 2}O{sub 3} nanoparticles are uniform and well-dispersed with their particle size in the range of 10–50 nm. The approach would open up a new window for simple and effective synthesis of high quality RE{sub 2}O{sub 3} in nano scale.

36 MATERIALS SCIENCE↗

Tunable synthesis of TiO{sub 2}/SrO core/shell nanowire arrays with enhanced photocatalytic activity

Graphical abstract: TiO{sub 2} nanowires with tunable SrO shell layer are easily fabricated. The core/shell structure can enhance the photocatalytic activity of TiO{sub 2} nanowires and restrict the recombination of the electrons/holes. Display Omitted Highlights: ► A facile method to fabricate TiO{sub 2}/SrO core-shell nanowire array is reported. ► The thickness of SrO shell layer can be tunable by adjusting the dipping time. ► TiO{sub 2}/SrO core/shell nanowires shows enhanced photocatalytic activity. -- Abstract: We report a simple method to fabricate well-aligned TiO{sub 2}/SrO core/shell nanowire arrays. The core/shell structure is confirmed to have crystalline TiO{sub 2} nanowires core and amorphous SrO shell layer. The shell is composed of SrO with tunable thickness. Photocatalytic activity measurement shows that TiO{sub 2}/SrO core/shell nanowire arrays outperform uncovered TiO{sub 2} nanowires. Such core/shell nanowire arrays have potential applications for photovoltaic devices and as high performance photocatalyst.

36 MATERIALS SCIENCE↗

Influence of halide flux on the crystallinity, microstructure and thermoluminescence properties of CdSiO{sub 3}:Co{sup 2+} nanophosphor

Graphical abstract: TL glow curves of CdSiO{sub 3}:Co{sup 2+} different alkali flux (inset without adding flux). Display Omitted Highlights: ► CdSiO{sub 3}:Co{sup 2+} (1–7 mol%) nanocrystalline phosphors synthesized by combustion route. ► Flux effect on thermoluminescence behavior of CdSiO{sub 3}:Co{sup 2+} reported for first time. ► Addition of 2 wt% of flux would drastically enhance the TL properties. ► Well resolved single glow peak at ∼170 °C was recorded for all the samples. ► Among all the alkali flux, NaCl shows highest TL peak intensity. -- Abstract: CdSiO{sub 3}:Co{sup 2+} (1–7 mol %) nanophosphors have been prepared via solution combustion method with post calcination at 800 °C for 2 h for the first time. The formation of expected monoclinic phase was investigated by Powder X-ray diffraction (PXRD) measurements. The effect of different fluxes like NaF, NaCl, NH{sub 4}F and NH{sub 4}Cl on the crystallinity, phase and morphology of CdSiO{sub 3} was investigated in detail. The crystallinity of the samples can be greatly enhanced by using fluxes rather than increasing the calcination temperature. Scanning electronic micrograph (SEM) image shows that the powder morphologies are highly influenced by flux addition. The addition of 2 wt% of fluxes would drastically enhance the crystallinity when NaCl, NH{sub 4}F and NH{sub 4}Cl fluxes are used. A well resolved single thermoluminescent glow peak at ∼170 °C was recorded for all the samples. Among all the halide fluxes, NaCl flux was found to be the potential one in enhancing the TL peak intensity along with crystallinity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗