SEARCH · Engineering Papers

Results for “user tool”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

All sources NASA NTRS DOE OSTI

NASA NTRS1974

An evaluation of the ERTS data collection system as a potential operational tool

The Earth Resources Technology Satellite Data Collection System has been shown to be, from the users vantage point, a reliable and simple system for collecting data from U.S. Geological Survey operational field instrumentation. It is technically feasible to expand the ERTS system into an operational polar-orbiting data collection system to gather data from the Geological Survey's Hydrologic Data Network. This could permit more efficient internal management of the Network, and could enable the Geological Survey to make data available to cooperating agencies in near-real time. The Geological Survey is conducting an analysis of the costs and benefits of satellite data-relay systems.

Paulson, R. W.↗

NASA NTRS1991

User manual for two simple postscript output FORTRAN plotting routines

Graphics is one of the important tools in engineering analysis and design. However, plotting routines that generate output on high quality laser printers normally come in graphics packages, which tend to be expensive and system dependent. These factors become important for small computer systems or desktop computers, especially when only some form of a simple plotting routine is sufficient. With the Postscript language becoming popular, there are more and more Postscript laser printers now available. Simple, versatile, low cost plotting routines that can generate output on high quality laser printers are needed and standard FORTRAN language plotting routines using output in Postscript language seems logical. The purpose here is to explain two simple FORTRAN plotting routines that generate output in Postscript language.

Nguyen, T. X.↗

NASA NTRS1990

Knowledge based automated scheduling and planning tools for IUE

The International Ultraviolet Explorer has been successfully operated as a real time user-interactive space observatory for twelve years. It is expected to continue operation for up to five additional years, but under increasing constraints. The option to operate IUE in a more automated, non user-interactive mode is under consideration. A sophisticated software system to support such an operation is a clear requirement. The conceptual framework of such a system is described. Results of a preliminary tests are presented for which a hypothetical four day schedule of space-craft activities at a time resolutions as low as ten minutes was generated.

Shrader, Chris R.↗

NASA NTRS2000

Web Time-Management Tool

Oak Grove Reactor, developed by Oak Grove Systems, is a new software program that allows users to integrate workflow processes. It can be used with portable communication devices. The software can join e-mail, calendar/scheduling and legacy applications into one interactive system via the web. Priority tasks and due dates are organized and highlighted to keep the user up to date with developments. Reactor works with existing software and few new skills are needed to use it. Using a web browser, a user can can work on something while other users can work on the same procedure or view its status while it is being worked on at another site. The software was developed by the Jet Propulsion Lab and originally put to use at Johnson Space Center.

Source record↗

NASA NTRS2009

The Use of Pro/Engineer CAD Software and Fishbowl Tool Kit in Ray-tracing Analysis

This document is designed as a manual for a user who wants to operate the Pro/ENGINEER (ProE) Wildfire 3.0 with the NASA Space Radiation Program's (SRP) custom-designed Toolkit, called 'Fishbowl', for the ray tracing of complex spacecraft geometries given by a ProE CAD model. The analysis of spacecraft geometry through ray tracing is a vital part in the calculation of health risks from space radiation. Space radiation poses severe risks of cancer, degenerative diseases and acute radiation sickness during long-term exploration missions, and shielding optimization is an important component in the application of radiation risk models. Ray tracing is a technique in which 3-dimensional (3D) vehicle geometry can be represented as the input for the space radiation transport code and subsequent risk calculations. In ray tracing a certain number of rays (on the order of 1000) are used to calculate the equivalent thickness, say of aluminum, of the spacecraft geometry seen at a point of interest called the dose point. The rays originate at the dose point and terminate at a homogenously distributed set of points lying on a sphere that circumscribes the spacecraft and that has its center at the dose point. The distance a ray traverses in each material is converted to aluminum or other user-selected equivalent thickness. Then all equivalent thicknesses are summed up for each ray. Since each ray points to a direction, the aluminum equivalent of each ray represents the shielding that the geometry provides to the dose point from that particular direction. This manual will first list for the user the contact information for help in installing ProE and Fishbowl in addition to notes on the platform support and system requirements information. Second, the document will show the user how to use the software to ray trace a Pro/E-designed 3-D assembly and will serve later as a reference for troubleshooting. The user is assumed to have previous knowledge of ProE and CAD modeling.

Nounu, Hatem N.↗

DOE OSTI2021

Online Interactive Platform for COVID-19 Literature Visual Analytics: Platform Development Study

Background Papers on COVID-19 are being published at a high rate and concern many different topics. Innovative tools are needed to aid researchers to find patterns in this vast amount of literature to identify subsets of interest in an automated fashion. Objective We present a new online software resource with a friendly user interface that allows users to query and interact with visual representations of relationships between publications. Methods We publicly released an application called PLATIPUS (Publication Literature Analysis and Text Interaction Platform for User Studies) that allows researchers to interact with literature supplied by COVIDScholar via a visual analytics platform. This tool contains standard filtering capabilities based on authors, journals, high-level categories, and various research-specific details via natural language processing and dozens of customizable visualizations that dynamically update from a researcher’s query. Results PLATIPUS is available online and currently links to over 100,000 publications and is still growing. This application has the potential to transform how COVID-19 researchers use public literature to enable their research. Conclusions The PLATIPUS application provides the end user with a variety of ways to search, filter, and visualize over 100,00 COVID-19 publications.</:p>

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

DOE OSTI2025

Improvements to MOOSE user workflow through polyhedral elements, automation, and concise physics syntax

The MOOSE framework is a foundational capability used by the NEAMS program to create over 15 different simulation tools for advanced nuclear reactors. Due to MOOSE's broad use, improvements to the framework in support of modeling and simulation goals are critical to the program. Such improvements can take many forms, including optimization, improved user experience, streamlined application programming interfaces (APIs), parallelism, and new capabilities. The work described in this report was conducted in direct support of NEAMS tools and includes: addition of support for polyhedral elements, incorporation of mesh smoothers for mesh repair, integration of the Physics and ActionComponents systems, expansion of the Convergence system, and exploration of automated input file generation. These five areas of development are fundamental capabilities that will be leveraged by many NEAMS applications.

97 - MATHEMATICS AND COMPUTING↗

DOE OSTI2021

State of Stress Uncertainty Quantification and Geomechanical Risk Analysis for Subsurface Engineering

All subsurface stress measurement methods available for deep subsurface applications are indirect and involve a significant amount of uncertainty. Quantifying these uncertainties is critical for applications where the state of stress is a component of a risk analysis with significant safety, environmental, and economic considerations. A publicly available and open source tool called the State of Stress Analysis Tool (SOSAT) has been developed to aid in performing a Bayesian uncertainty quantification and geomechanical risk analysis using many types of commonly available data. A new feature of this tool is using data from the FutureGen 2.0 site. The new feature of the tool was uses information about the absence or presence of borehole breakouts to constrain the state of stress. This new feature allows the user to specify probability distributions for the relevant parameters such as the drilling mud pressure, temperature, and the formation strength properties. The tool computes the posterior joint probability distribution of the horizontal principal stresses. Using random samples from this posterior distribution the tool then computes the probability of activating a critically oriented fault at a range of pore pressures. This latter feature can be used to aid in the assessment of the risk of induced seismicity and leakage in geologic carbon sequestration and enhanced geothermal systems.

Burghardt, Jeffrey A.↗

DOE OSTI2025

User Acceptance of Shared Autonomous Vehicles

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why users prefer or refuse to use PR at the current stage prepares SAVs for broader acceptance in the future. Until now, a series of peer-reviewed publications have been published to achieve the technical goals. Two simulator-based user studies were conducted to instrument the research on human comfort in AVs. Statistical analysis was performed to identify the crucial vehicular behavioral factors of human comfort in AVs. The influential factors of human comfort in AVs and methodologies to quantify and detect human comfort in AVs were investigated. Two survey-based studies were deployed to facilitate the investigation of user acceptance of rideshare services. The influential factors of users' willingness to consider PR were explored and identified, and the choice behaviors in ridesharing services were comprehensively modeled and analyzed. The proposed research answers a series of fundamental questions regarding the user acceptance of SAVs. For the branch of user acceptance of AVs, the research generated guidelines for improving passenger comfort in AVs by identifying a series of autonomous driving factors of passenger comfort. The research also provides fundamental tools to estimate human comfort levels for future research and in-AV applications. For the branch of user acceptance of PR, the research provided user acceptance-aware vehicle, service, and policy design insights that can promote the usage of PR.

Su, Haotian↗

NASA NTRS1996

Automated clustering-based workload characterization

The demands placed on the mass storage systems at various federal agencies and national laboratories are continuously increasing in intensity. This forces system managers to constantly monitor the system, evaluate the demand placed on it, and tune it appropriately using either heuristics based on experience or analytic models. Performance models require an accurate workload characterization. This can be a laborious and time consuming process. It became evident from our experience that a tool is necessary to automate the workload characterization process. This paper presents the design and discusses the implementation of a tool for workload characterization of mass storage systems. The main features of the tool discussed here are: (1)Automatic support for peak-period determination. Histograms of system activity are generated and presented to the user for peak-period determination; (2) Automatic clustering analysis. The data collected from the mass storage system logs is clustered using clustering algorithms and tightness measures to limit the number of generated clusters; (3) Reporting of varied file statistics. The tool computes several statistics on file sizes such as average, standard deviation, minimum, maximum, frequency, as well as average transfer time. These statistics are given on a per cluster basis; (4) Portability. The tool can easily be used to characterize the workload in mass storage systems of different vendors. The user needs to specify through a simple log description language how the a specific log should be interpreted. The rest of this paper is organized as follows. Section two presents basic concepts in workload characterization as they apply to mass storage systems. Section three describes clustering algorithms and tightness measures. The following section presents the architecture of the tool. Section five presents some results of workload characterization using the tool.Finally, section six presents some concluding remarks.

Pentakalos, Odysseas I.↗

NASA NTRS1993

A SIMULINK environment for flight dynamics and control analysis: Application to the DHC-2 Beaver. Part 1: Implementation of a model library in SIMULINK. Part 2: Nonlinear analysis of the Beaver autopilot

The design of advanced Automatic Aircraft Control Systems (AACS's) can be improved upon considerably if the designer can access all models and tools required for control system design and analysis through a graphical user-interface, from within one software environment. This MSc-thesis presents the first step in the development of such an environment, which is currently being done at the Section for Stability and Control of Delft University of Technology, Faculty of Aerospace Engineering. The environment is implemented within the commercially available software package MATLAB/SIMULINK. The report consists of two parts. Part I gives a detailed description of the AACS design environment. The heart of this environment is formed by the SIMULINK implementation of a nonlinear aircraft model in block-diagram format. The model has been worked out for the old laboratory aircraft of the Faculty, the De Havilland DHC-2 'Beaver', but due to its modular structure, it can easily be adapted for other aircraft. Part I also describes MATLAB programs which can be applied for finding steady-state trimmed-flight conditions and for linearization of the aircraft model, and it shows how the built-in simulation routines of SIMULINK have been used for open-loop analysis of the aircraft dynamics. Apart from the implementation of the models and tools, a thorough treatment of the theoretical backgrounds is presented. Part II of this report presents a part of an autopilot design process for the 'Beaver' aircraft, which clearly demonstrates the power and flexibility of the AACS design environment from part I. Evaluations of all longitudinal and lateral control laws by means of nonlinear simulations are treated in detail. The AACS design environment from part I proved to be a very useful tool for designing the control laws of the 'Beaver' autopilot within a very tight time-schedule. The autopilot design process itself will be used as a guideline for future AACS research at the Faculty of Aerospace Engineering. Flight tests of the 'Beaver' autopilot, done after evaluating the control laws in the SIMULINK package, proved to be quite successful. In the future, the AACS design package will evolve into a standardized, integrated design environment which can be applied to virtually any type of aircraft. The AACS design cycle will be shortened further by developing tools for automatically porting control laws from the MATLAB/SIMULINK environment to a piloted real-time flight simulator and the Flight Control Computers of the aircraft.

Flight Control System Design↗

NASA NTRS2018

Development of the ITACA Network Loading Analysis Tool's Scheduling Techniques

NASA's SCENIC project aims to simplify and reduce the cost of space mission planning by creating analysis capabilities which are integrated with relevant analysis parameters specific to SCaN assets and SCaN supported user missions. The Integrated Tradespace Analysis of Communications Architectures (ITACA) will provide an all-in-one package for various analysis capabilities that normally require add-ons or multiple tools to complete. The ITACA tool will be responsible for assessing the given network architecture and generating a schedule for the missions as well as the assets. ITACA will allow users to evaluate the quality of service of a given network and determine whether or not the network will satisfy the mission's requirements. ITACA is currently under development, and during the spring of 2018 major development in the tools scheduling techniques were completed. A total of seven different techniques were completed.

space communications↗

NASA NTRS2004

Using the GeoFEST Faulted Region Simulation System

GeoFEST (the Geophysical Finite Element Simulation Tool) simulates stress evolution, fault slip and plastic/elastic processes in realistic materials, and so is suitable for earthquake cycle studies in regions such as Southern California. Many new capabilities and means of access for GeoFEST are now supported. New abilities include MPI-based cluster parallel computing using automatic PYRAMID/Parmetis-based mesh partitioning, automatic mesh generation for layered media with rectangular faults, and results visualization that is integrated with remote sensing data. The parallel GeoFEST application has been successfully run on over a half-dozen computers, including Intel Xeon clusters, Itanium II and Altix machines, and the Apple G5 cluster. It is not separately optimized for different machines, but relies on good domain partitioning for load-balance and low communication, and careful writing of the parallel diagonally preconditioned conjugate gradient solver to keep communication overhead low. Demonstrated thousand-step solutions for over a million finite elements on 64 processors require under three hours, and scaling tests show high efficiency when using more than (order of) 4000 elements per processor. The source code and documentation for GeoFEST is available at no cost from Open Channel Foundation. In addition GeoFEST may be used through a browser-based portal environment available to approved users. That environment includes semi-automated geometry creation and mesh generation tools, GeoFEST, and RIVA-based visualization tools that include the ability to generate a flyover animation showing deformations and topography. Work is in progress to support simulation of a region with several faults using 16 million elements, using a strain energy metric to adapt the mesh to faithfully represent the solution in a region of widely varying strain.

Geophyical Finite Element Simulation Tool (GeoFEST↗

NASA NTRS2010

Modifications to the Objective Lightning Probability Forecast Tool at Kennedy Space Center/Cape Canaveral Air Force Station, Florida

The 45th Weather Squadron (45 WS) at Cape Canaveral Air Force Station (CCAFS) includes the probability of lightning occurrence in their 24-Hour and Weekly Planning Forecasts, briefed at 0700 EDT for daily operations planning on Kennedy Space Center (KSC) and CCAFS. This forecast is based on subjective analyses of model and observational data and output from an objective tool developed by the Applied Meteorology Unit (AMU). This tool was developed over two phases (Lambert and Wheeler 2005, Lambert 2007). It consists of five equations, one for each warm season month (May-Sep), that calculate the probability of lightning occurrence for the day and a graphical user interface (GUI) to display the output. The Phase I and II equations outperformed previous operational tools by a total of 56%. Based on this success, the 45 WS tasked the AMU with Phase III to improve the tool further.

Crawford, Winifred↗

NASA NTRS1995

Machine learning for a Toolkit for Image Mining

A prototype user environment is described that enables a user with very limited computer skills to collaborate with a computer algorithm to develop search tools (agents) that can be used for image analysis, creating metadata for tagging images, searching for images in an image database on the basis of image content, or as a component of computer vision algorithms. Agents are learned in an ongoing, two-way dialogue between the user and the algorithm. The user points to mistakes made in classification. The algorithm, in response, attempts to discover which image attributes are discriminating between objects of interest and clutter. It then builds a candidate agent and applies it to an input image, producing an 'interest' image highlighting features that are consistent with the set of objects and clutter indicated by the user. The dialogue repeats until the user is satisfied. The prototype environment, called the Toolkit for Image Mining (TIM) is currently capable of learning spectral and textural patterns. Learning exhibits rapid convergence to reasonable levels of performance and, when thoroughly trained, Fo appears to be competitive in discrimination accuracy with other classification techniques.

Delanoy, Richard L.↗

NASA NTRS1994

Use of data description languages in the interchange of data

The Consultative Committee for Space Data Systems (CCSDS) is developing Standards for the interchange of information between systems, including those operating under different environments. The objective is to perform the interchange automatically, i.e. in a computer interpretable manner. One aspect of the concept developed by CCSDS is the use of a separate data description to specify the data being transferred. Using the description, data can then be automatically parsed by the receiving computer. With a suitably expressive Data Description Language (DDL), data formats of arbitrary complexity can be handled. The advantages of this approach are: (1) that the description need only be written and distributed once to all users, and (2) new software does not need to be written for each new format, provided generic tools are available to support writing and interpretation of descriptions and the associated data instances. Consequently, the effort of 'hard coding' each new format is avoided and problems of integrating multiple implementations of a given format by different users are avoided. The approach is applicable in any context where computer parsable description of data could enhance efficiency (e.g. within a spacecraft control system, a data delivery system or an archive). The CCSDS have identified several candidate DDL's: EAST (Extended Ada Subset), TSDN (Transfer Syntax Data Notation) and MADEL (Modified ASN.1 as a Data Description Language -- a DDL based on the Abstract Syntax Notation One - ASN.1 - specified in the ISO/IEC 8824). This paper concentrates on ESA's development of MADEL. ESA have also developed a 'proof of concept' prototype of the required support tools, implemented on a PC under MS-DOS, which has successfully demonstrated the feasibility of the approach, including the capability within an application of retrieving and displaying particular data elements, given its MADEL description (i.e. a data description written in MADEL). This paper outlines the work done to date and assesses the applicability of this modified ASN.1 as a DDL. The feasibility of the approach is illustrated with several examples.

Pignede, M.↗

NASA NTRS1992

NASA Lewis steady-state heat pipe code users manual

The NASA Lewis heat pipe code was developed to predict the performance of heat pipes in the steady state. The code can be used as a design tool on a personal computer or with a suitable calling routine, as a subroutine for a mainframe radiator code. A variety of wick structures, including a user input option, can be used. Heat pipes with multiple evaporators, condensers, and adiabatic sections in series and with wick structures that differ among sections can be modeled. Several working fluids can be chosen, including potassium, sodium, and lithium, for which monomer-dimer equilibrium is considered. The code incorporates a vapor flow algorithm that treats compressibility and axially varying heat input. This code facilitates the determination of heat pipe operating temperatures and heat pipe limits that may be encountered at the specified heat input and environment temperature. Data are input to the computer through a user-interactive input subroutine. Output, such as liquid and vapor pressures and temperatures, is printed at equally spaced axial positions along the pipe as determined by the user.

Tower, Leonard K.↗

DOE OSTI2021

NEAMS Workbench MOOSE Integration Update

The Nuclear Energy Advanced Modeling and Simulation (NEAMS) Workbench is a graphical user interface (GUI) that provides a common analysis environment for the accelerated use of the NEAMS toolkit. To improve design and analysis of current and future nuclear energy systems, the NEAMS Workbench provides an integrated development environment for model creation, review, execution, output review, and visualization for integrated tools. In addition to a GUI, the NEAMS Workbench provides the Workbench Analysis Sequence Processor, an open-source tool set that facilitates input-content assistance for supported domain-specific input languages and user-friendly syntaxes. These supported syntaxes enable accelerated development and deployment of enhanced user inputs and workflows. The Multiphysics Object-Oriented Simulation Environment (MOOSE) has been supported in the NEAMS Workbench since 2016 and receives continuous updates. Efforts to improve MOOSE-based tool integration in the NEAMS Workbench are ongoing. This document details the current and planned enhancements of the NEAMS Workbench and the MOOSE framework to improve integration and usability of MOOSE-based applications within the NEAMS Workbench.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗