Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Strain-Induced Lateral Heterostructures in Patterned Semiconductor Nanomembranes for Micro- and Optoelectronics

The ability to tailor the energy band lineup of semiconductor materials plays a key role in the development of many electronic and optoelectronic devices and normally relies on heteroepitaxy. In this work, we report a different method, based on strain engineering, for the controlled introduction of variations in bandgap energy with lateral position in thin films. External stress is applied on Ge nanomembranes stacked with an array of amorphous-Si pillars in order to create a non-uniform strain (and therefore bandgap energy) distribution commensurate with the sample thickness variations. The resulting strain profiles are mapped using Bragg diffraction with a hard X-ray probe featuring nanoscale spatial resolution. Compared with traditional heterostructures grown by epitaxial techniques, these strain-engineered samples involve a single chemical composition and are not limited in the choice of compatible materials by any restriction imposed by lattice-matching requirements. Furthermore, their energy band lineups can be patterned in nearly arbitrary shapes using nanolithography to control the thickness profile and can be tuned actively by varying the applied stress. As a result, these structures are attractive for a wide range of device applications (including lasers, LEDs, solar cells, and thermoelectrics) that require complex heterostructure lineups with multiple bandgap energies.

36 MATERIALS SCIENCE↗

Interplay of Quantum Size Effect and Tensile Strain on Surface Morphology of β-Sn(100) Islands

The quantum size effect (QSE) and strain effect are two key factors influencing the surface morphology of thin films, which can increase film surface roughness through QSE-induced thickness oscillation and strain-induced island formation, respectively. Surface roughness usually manifests in the early stages of film growth and diminishes beyond a critical thickness. In this work, we employ molecular beam epitaxy (MBE) to grow β-Sn(100) islands with varying thickness N on bilayer graphene-terminated 6H-SiC(0001) substrates. Scanning tunneling microscopy and spectroscopy measurements reveal an inverse surface roughness effect that highlights the interplay of QSE and misfit strain in shaping the surface morphology of β-Sn(100) islands. For N ≤ 10, the islands exhibit flat surfaces, while for N ≥ 26, the island surfaces become corrugated and patterned. For the intermediate range, i.e., 12 ≤ N ≤ 24, both flat and patterned surfaces coexist, with the percentage coverage of the patterned surface oscillating as a function of N. By performing density functional theory calculations, we demonstrate that the unusual surface pattern evolution in our MBE-grown β-Sn(100) islands is a result of the interplay between QSE-induced surface roughing and tensile strain-induced smoothening effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystal Structure and Characterization of Particulate Methane Monooxygenase from Methylocystis species Strain M

Particulate methane monooxygenase (pMMO) is an integral membrane metalloenzyme that oxidizes methane to methanol in methanotrophic bacteria. Previous biochemical and structural studies of pMMO have focused on preparations from Methylococcus capsulatus (Bath) and Methylosinus trichosporium OB3b. A pMMO from a third organism, Methylocystis species strain M, has been isolated and characterized. Both membrane-bound and solubilized Methylocystis sp. strain M pMMO contain {approx}2 copper ions per 100 kDa protomer and exhibit copper-dependent propylene epoxidation activity. Spectroscopic data indicate that Methylocystis sp. strain M pMMO contains a mixture of Cu{sup I} and Cu{sup II}, of which the latter exhibits two distinct type 2 Cu{sup II} electron paramagnetic resonance (EPR) signals. Extended X-ray absorption fine structure (EXAFS) data are best fit with a mixture of Cu-O/N and Cu-Cu ligand environments with a Cu-Cu interaction at 2.52-2.64 {angstrom}. The crystal structure of Methylocystis sp. strain M pMMO was determined to 2.68 {angstrom} resolution and is the best quality pMMO structure obtained to date. It provides a revised model for the pmoA and pmoC subunits and has led to an improved model of M. capsulatus (Bath) pMMO. In these new structures, the intramembrane zinc/copper binding site has a different coordination environment from that in previous models.

03 NATURAL GAS↗

Epitaxial Strain-Induced Chemical Ordering in La0.5Sr0.5CoO3-delta Films on SrTiO3

Fast ion conductors are at the foundation of a number of important technologies, ranging from fuel cells to batteries to gas separators. Recent results suggest that strained interfaces and thin films may offer new mechanisms for achieving enhanced ionic transport. In this work, we investigate strained 40-nm films of perovskite La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}}, which is an important material for solid oxide fuel cell cathodes and oxygen separation membranes. We demonstrate that a strained thin film of La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}} on SrTiO{sub 3} can have dramatically different anion and cation thermodynamics and kinetics than bulk La{sub 0.5}Sr{sub 0.5}CaO{sub 3-{delta}}. We use synchrotron X-ray diffraction to show that La{sub 0.5}Sr{sub 0.5}CoO{sub 3-{delta}} thin films form an ordered phase at 650 K. The ordered phase consists of La and Sr cations in planes parallel to the surface and is associated with coherent expansion in the c-direction of {approx}5%. This chemical ordering is not observed in the bulk material and is ascribed to the interplay between the epitaxial strain imposed by the substrate, changes in oxygen vacancy content and cation mobility, and the ordering of oxygen vacancies.

30 DIRECT ENERGY CONVERSION↗

Strain-induced phase and oxygen-vacancy stability in ionic interfaces from first-principles calculations

Understanding interfacial chemistry is becoming crucial in materials design for heterointerfaces. Using density functional theory, we elucidate the effect of strained interfaces on phase and oxygen-vacancy stability for CeO2 | ZrO2, ThO2 | ZrO2 and CeO2 | ThO2 interfaces. The calculations show that ZrO2 transforms from cubic fluorite to the orthorhombic columbite under tensile strain providing evidence of a previous experimental speculation of an unrecognized ZrO2 phase. We also show that oxygen vacancies could be preferably stabilized on either side of the interface by manipulating strain. We predict that they are stable in tensile-strain, and unstable in compressivestrained materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tensile Strain Switched Ferromagnetism in Layered NbS2 and NbSe2

Developing approaches to effectively induce and control the magnetic states is critical to the use of magnetic nanostructures in quantum information devices but is still challenging. Here we have demonstrated, by employing the density functional theory calculations, an existence of infinite magnetic sheets with structural integrity and magnetic homogeneity. Examination from a series of transition metal dichalcogenides shows that the biaxial tensile strained NbS2 and NbSe2 structures can be magnetized with a ferromagnetic character due to the competitive effects of through-bond interaction and through-space interaction. The estimated Curie temperatures (387 and 542 K under the 10% strain for NbS2 and NbSe2 structures, respectively) suggest that the unique ferromagnetic character can be achieved above room temperature. The self-exchange of population between 4d orbitals of Nb atom that leads to the exchange splitting is the mechanism behind the transition of the spin moment. The induced magnetic moments can be significantly enhanced by the tensile strain, even giving rise to half-metallic character with the strong spin polarization around the Fermi level. Given the recent progress that the desired strain can be achieved on two-dimensional nanostructures, such as graphene and BN layer in a controlled way, we believe that our calculated results are suitable for experimental verification and implementation opening a new path to explore the spintronics in pristine two-dimensional nanostructures.

biaxial strain↗

3D printed graphene-based self-powered strain sensors for smart tires in autonomous vehicles

The transition of autonomous vehicles into fleets requires an advanced control system design that relies on continuous feedback from the tires. Smart tires enable continuous monitoring of dynamic parameters by combining strain sensing with traditional tire functions. Here, we provide breakthrough in this direction by demonstrating tire-integrated system that combines direct mask-less 3D printed strain gauges, flexible piezoelectric energy harvester for powering the sensors and secure wireless data transfer electronics, and machine learning for predictive data analysis. Ink of graphene based material was designed to directly print strain sensor for measuring tire-road interactions under varying driving speeds, normal load, and tire pressure. A secure wireless data transfer hardware powered by a piezoelectric patch is implemented to demonstrate self-powered sensing and wireless communication capability. Combined, this study significantly advances the design and fabrication of cost-effective smart tires by demonstrating practical self-powered wireless strain sensing capability.

33 ADVANCED PROPULSION SYSTEMS↗

Novel penta-graphene nanotubes: strain-induced structural and semiconductor–metal transitions

Research into novel one-dimensional (1D) materials and associated structural transitions is of significant scientific interest. It is widely accepted that a 1D system with a short-range interaction cannot have 1D phase transition at finite temperature. In this paper, we propose a series of new stable carbon nanotubes by rolling up penta-graphene sheets, which exhibit fascinating well-defined 1D phase transitions triggered by axial strain. Our first-principles calculations show that such penta-graphene nanotubes (PGNTs) are dynamically stable by phonon calculations, but transform from a tri-layer structure to a highly defective single-walled nanotube at low temperature in molecular dynamics simulations. We show that moderate compressive strains can drive structural transitions of (4,4), (5,5), and (6,6) PGNTs, during which the distances of neighboring carbon dimers in the inner shell have a sudden drop, corresponding to dimer–dimer nonbonding to bonding transitions. After such transition, the tubes become much more thermally stable and undergo semiconductor–metal transitions under increasing strain. The band gaps of PGNTs are not sensitive to chirality whereas they can be tuned effectively from visible to short-wavelength infrared by appropriate strain, making them appealing materials for flexible nano-optoelectronics. In conclusion, these findings provide useful insight into unusual phase transitions in low-dimensional systems.

36 MATERIALS SCIENCE↗

Strain-coupled ferroelectric polarization in BaTiO3-CaTiO3 superlattices

We report on growth and ferroelectric (FE) properties of superlattices (SLs) composed of the FE BaTiO{sub 3} and the paraelectric CaTiO{sub 3}. Previous theories have predicted that the polarization in (BaTiO{sub 3})n/(CaTiO{sub 3})n SLs increases as the sublayer thickness (n) increases when the same strain state is maintained. However, our BaTiO{sub 3}/CaTiO{sub 3} SLs show a varying lattice-strain state and systematic reduction in polarization with increasing n while coherently strained SLs with n = 1 and 2 show a FE polarization of ca. 8.5 {micro}C/cm{sup 2}. We suggest that the strain coupling plays a more important role in FE properties than the electrostatic interlayer coupling based on constant dielectric permittivities.

36 MATERIALS SCIENCE↗

Strain relaxation in short-period polar GaN/AlN superlattices

We have investigated the strain relaxation mechanisms in short-period polar GaN/AlN superlattices deposited by plasma-assisted molecular-beam epitaxy, and designed to display intersubband transitions at 1.55 mum. In a first stage, we have identified the growth conditions to minimize strain relaxation, using a Ga excess to reduce the (0001) surface free energy of both GaN and AlN. Under these growth conditions, crack propagation is not observed, even for the tensile-strained superlattices grown on GaN templates. The initial misfit relaxation in the vicinity of the buffer occurs by the formation of a-type dislocations. The final strain state of the superlattice, reached after 10-20 periods, is independent of the substrate (either GaN or AlN templates). Once the steady-state conditions are reached, we observe a periodic partial relaxation of quantum wells and barriers. High-resolution transmission electron microscopy indicates that the periodic relaxation can be related to the presence of basal and prismatic stacking faults creating clusters with an in-plane length of tens of nanometers. The effect of these defects on the optical performance of the superlattices is discussed by simulation of electronic structure using an 8x8kcentre dotp Schroedinger-Poisson solver. In the presence of basal stacking faults at the quantum well interfaces, the deviation of the e{sub 1}-e{sub 2} intersubband transition with respect to the nominal value is expected to be smaller than the measured absorption line width.

36 MATERIALS SCIENCE↗

Anisotropic strain-stress state and intermixing in epitaxial Mo(110)/Ni(111) multilayers: An x-ray diffraction study

The present study deals with the analysis of elastic strains and stresses in high-quality heteroepitaxial Mo/Ni superlattices with periods {Lambda} lying in the range 4.8-27.6 nm. The strain-stress state in this lattice-mismatched system grown under energetic deposition conditions (ion beam sputtering) is rather complex, resulting from three contributions: (i) intrinsic (growth) stress due to atomic peening, (ii) coherency stresses of opposite sign in the two elemental layers due to the observed Nishiyama-Wassermann epitaxial relationship Ni[110](111)||Mo[001](110), and (iii) interfacial mixing. The measurement of the lattice parameters of Mo and Ni sublayers in various crystallographic directions was performed by x-ray diffraction, using the sin{sup 2} {psi} method adapted for epitaxial layers. A large anisotropy of elastic strain and associated in-plane coherency stresses is revealed in the Mo sublayers, while for Ni sublayers no such behavior could be detected due to the superimposition of growth variants with threefold symmetry. Postgrowth ion irradiation with Ar ions at very low dose ({approx}0.2 dpa) was employed as a powerful tool to modify the intrinsic stress, thus providing additional data to be implemented in a triaxial strain-stress model, which enabled us to separate the different stress sources (intrinsic and coherency stresses) as well as to quantify the intermixing occurring during growth. This model, which has been successfully applied previously to Mo thin films, yields in the case of multilayer systems to the determination of the ''stress-free and defect-free'' lattice parameter, a{sub 0}, i.e., solely linked to chemical mixing. The linear dependence of a{sub 0} with {Lambda} observed in both sublayers reveals an interface-mediated chemical mixing mechanism, the extent of this interfacial mixing being much more pronounced in Mo sublayers than in Ni ones.

36 MATERIALS SCIENCE↗

In situ synchrotron x-ray studies of strain and composition evolution during metal-organic chemical vapor deposition of InGaN.

Composition and strain inhomogeneities strongly affect the optoelectronic properties of InGaN but their origin has been unclear. Here we report real-time x-ray reciprocal space mapping that reveals the development of strain and composition distributions during metal-organic chemical vapor deposition of In{sub x}Ga{sub 1-x}N on GaN. Strong, correlated inhomogeneities of the strain state and In fraction x arise during growth in a manner consistent with models for instabilities driven by strain relaxation.

36 MATERIALS SCIENCE↗

Strain tensors in layer systems by precision ion channeling measurements

A powerful method for analyzing general strain states in layer systems is the measurement of changes in the ion channeling directions. We present a systematic derivation and compilation of the required relations between the strain induced angle changes and the components of the strain tensor for general crystalline layer systems of reduced symmetry compared to the basic (cubic) crystal. It is shown that, for the evaluation of channeling measurements, virtually all layers of interest may be described as being 'pseudo-orthorhombic'. The commonly assumed boundary conditions and the effects of surface misorientations on them are discussed. Asymmetric strain relaxation in layers of reduced symmetry is attributed to a restriction in the slip system of the dislocations inducing it. The results are applied to {l_brace}110{r_brace}SiGe/Si layer systems.

36 MATERIALS SCIENCE↗

FIBER BRAGG GRATING SENSORS FOR LOCALIZED STRAIN MEASUREMENTS AT LOW TEMPERATURE AND IN HIGH MAGNETIC FIELD

Study of magnetostrictive effects in the bulk superconductors is very essential and can give more knowledge about the effects like namely, flux pinning induced strain, pincushion distortions in the magnets and so on. Currently used electro mechanical sensors are magnetic field dependent and can only give the global stress/strain information but not the local stress/strains. But the information like radius position dependent strain and characterisation of shape distortion in non cylindrical magnets are interesting. Wavelength encoded multiplexed fiber Bragg Grating sensors inscribed in one fiber gives the possibility to measure magentostrictive effects spatially resolved in low temperature and high magnetic field. This paper specifies the design and technology requirements to adapt FBG sensors for such an application. Also reports the experiments demonstrate the properties of glass FBG at low temperature (4.2 K) and the results of strain measurement at 4.2 K/8 T. The sensor exhibits a linear wavelength change for the strain change.

42 ENGINEERING↗

Size-dependent Strain in Epitaxial (001) Gadolinium-doped Ceria Nanoislands

We report size-dependent strain in epitaxial gadolinium doped ceria nanoislands, which was determined by synchrotron x-ray diffraction. Reciprocal space sections of symmetric, (004) and asymmetric, (224) reflections are approximated by a model assuming size-dependent strain of the islands using real-space size distribution obtained by atomic force microscopy. We show that the islands smaller than 40 nm are subjected to a high level of lateral tensile strain and normal compression. The lateral to normal strain ratio determined from the reciprocal map analysis suggests that lateral tension is the primary stress generator, possibly due to oxygen vacancy ordering on the island-substrate interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quality Control On Strained Semiconductor Devices

New semiconductor devices are based very often on strained silicon which promises to squeeze more device performance out of current devices. With strained silicon it is possible to get the same device performance using less power. The technique is using strain as a 'design element' for silicon to improve the device performance and has become a hot topic in semiconductor research in the past years. However in the same time topics like 'System in Package'(SiP) on thin wafers are getting more and more important. The chips of thin wafers in advanced packaging are extremely sensitive to induced stresses due to packaging issues. If we are using now strain as a design element for improving device performance we increase the sensitivity again and therefore also the risk of aging of such SiP's. High Resolution X-ray diffraction (HRXRD) techniques such as Rocking Curves (RC's) and Reciprocal Space Mapping (RSM) are therefore very powerful tools to study the stresses in packaged devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Epitaxial strain and antiferromagnetism in Heusler Fe{sub 2}VSi thin films

The effects of biaxial strain on the electrical and magnetic properties of an antiferromagnetic Heusler compound Fe{sub 2}VSi were systematically investigated. A series of epitaxial Fe{sub 2}VSi thin films on MgAl{sub 2}O{sub 4} and MgO substrates were fabricated with different tensile strains by varying the substrate-lattice mismatch and the film thickness. The strain was characterized by the ratio of the out-of-plane lattice parameter c to the in-plane lattice parameter a; this ratio c/a varied from 0.987 to 0.998 at room temperature. The tensile epitaxial strain was found to increase the antiferromagnetic Neel temperature T{sub N} to 193 K, which is 70 K higher than that for the unstrained bulk material. A clear dependence of T{sub N} on c/a was observed, which is consistent with theoretical predictions in which the band Jahn-Teller effect plays a significant role.

36 MATERIALS SCIENCE↗

Strong growth orientation dependence of strain relaxation in epitaxial (Ba,Sr)TiO{sub 3} films and the resulting dielectric properties

The growth orientation dependence of strain relaxation and the dielectric properties were investigated for (001)- and (111)-epitaxial (Ba,Sr)TiO{sub 3} films. The films were deposited on SrRuO{sub 3}/SrTiO{sub 3} and SrTiO{sub 3} substrates using rf magnetron sputtering. The residual strain was found to be remarkably different between the two orientations, although these lattice mismatches are identical; the strain relaxation of the (001)-epitaxial films is significantly slower than that of the (111)-epitaxial films and is promoted only when the growth rate is very low ({<=}5 nm/h). The observed orientation dependence is discussed with the surface energy for both growth orientations, which influences the growth mode of the films. Due to the large contrast of the strain in the (001)- and (111)-epitaxial films, the paraelectric to ferroelectric phase transition temperature of the (001)-epitaxial films is much higher than that of unstrained bulks, while the (111)-epitaxial films show a phase transition temperature corresponding to that of unstrained bulks regardless of the growth rates.

36 MATERIALS SCIENCE↗