Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sectionalizing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Neutron Capture Cross Section of 239 Pu

The Detector for Advanced Neutron Capture Experiments (DANCE) has been used to measure the 239 Pu(n,γ) cross section from 10 eV to the keV region. Three experimental run conditions were used to characterize the prompt fission γ-ray spectrum across the entire energy regime, measure the cross section in the resolved resonance region, and obtain necessary count rate well into the keV region. The preliminary cross sections are in good agreement with current evaluations from 10 eV to 80 keV.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status of Cross-section Data Libraries for MCNP

The Data Team, part of the XCP-5 group at LANL, uses the NJOY code and other codes to prepare the cross-section data files used by the Monte Carlo codes MCNP5, MCNPX, and MCNP6. They perform extensive quality assurance checking of those data files. The cross-section data files are included with the releases of MCNP that are distributed by RSICC. MCNP5 is developed and supported by the Monte Carlo Codes group (XCP-3) at LANL. MCNPX is developed and supported by the NEN-5 group at LANL. MCNP6 is a merger of MCNP5 and MCNPX, with numerous additional features, and is jointly developed and supported by the XCP-3 and NEN-5 groups. MCNP5 and MCNPX are "frozen" codes, and all new development is being carried out only in the MCNP6 code. In the past, when new types of data or improved representations were developed, the Data Team would incorporate the changes into the cross-section data files, and the Monte Carlo groups would make corresponding changes to the MCNP codes to use the new data. At present, however, only MCNP6 is updated to handle new data representations; MCNP5/X are not.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Surrogate measurement of the 238 Pu(n, ƒ) cross section

The neutron induced fission cross-section of 238 Pu was determined using the Surrogate Ratio Method (SRM). The (n, ƒ) cross section over an equivalent neutron energy range of 5 - 20 MeV was deduced from inelastic α-induced fission reactions on 239 Pu, with 235 U(α, α´ ƒ) and 236 U(α, α´ ƒ) used as references. These reference reactions reflect 234 U(n, ƒ) and 235 U(n, ƒ) yields, respectively. The deduced 238 Pu(n, ƒ) cross section agrees well with standard data libraries up to ~10 MeV, although larger values are seen at higher energy. The difference at higher energy is less than 20%.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Determining fission cross sections of short lived nuclei in the actinide region

This brief report summarizes the experimental and nuclear theory and modeling approach needed to determine cross sections on short-lived nuclei. Previous work on actinide (n,f) cross sections has shown the technique to be accurate to 20% below En = 1 MeV, and 10% above. Measurements are proposed that will meet and exceed this level of accuracy for (n,f) cross sections on ground and excited states by constraining critical model uncertainties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ENDF Cross Sections are not Uniquely Defined

Most evaluated data that is coded into the ENDF format [1] does not uniquely define cross sections, because the evaluator defined total is not equal to the sum of evaluator defined partial cross sections, i.e., the total is not equal to elastic plus capture, etc. So we have always had the question: What is the correct total cross section? This is not a new problem; it has existed since the very beginning of ENDF over forty years ago. It is a problem that is periodically discussed and apparently handled, only to have it pop up again every ten years or so, as we have the next generation of ENDF format users who are not aware of the problem. See the Appendices for a summary of the differences that exist today for the ENDF/B-VII.0 (Appendix C), JEFF- 3.1(Appendix D), JENDL-3.3 (Appendix E), and CENDL-3.1 (Appendix F) data libraries. For use in our application we need consistent, unique data. To accomplish this for decades we [2, 3] have been ignoring the evaluator defined total, and re-defining it as equal to the sum of its evaluator defined parts. This has never been completely satisfactory to us, because we have been doing this without consulting evaluators, or obtaining their approval, so that the data we actually use in our applications may or may not be what the evaluators intended.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New Opportunity for Improved Nuclear Forensics, Radiochemical Diagnostics, and Nuclear Astrophysics: Need for a Total-Cross-Section Apparatus at the LANSCE

Total-cross-section measurements are feasible on a much wider range of radioactive samples than (n,γ) cross-section measurements, and information extracted from the former can be used to set tight constraints on the latter. There are many (n,γ) cross sections of great interest to radiochemical diagnostics, nuclear forensics, and nuclear astrophysics which are beyond the reach of current direct measurement, that could be obtained in this way. Our simulations indicate that measurements can be made at the Manuel Lujan Jr. Neutron Scattering Center at the Los Alamos Neutron Science Center for samples as small as 10μg. There are at least 40 high-interest nuclides which should be measurable, including 88 Y, 167,168,170,171 Tm, 173,174 Lu, and 189,190,192 Ir.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of Cross Section Library and Application Programming Interface (API)

The goal of NEAMS neutronics is to develop a high-fidelity deterministic neutron transport code termed PROTEUS for use on all reactor types of interest, but focused primarily on sodium-cooled fast reactors. While PROTEUS-SN has demonstrated good accuracy for homogeneous fast reactor problems and partially heterogeneous fast reactor problems, the simulation results were not satisfactory when applied on fully heterogeneous thermal problems like the Advanced Test Reactor (ATR). This is mainly attributed to the quality of cross section data for heterogeneous geometries since the conventional cross section generation approach does not work accurately for such irregular and complex geometries. Therefore, one of the NEAMS neutronics tasks since FY12 has been the development of a procedure to generate appropriate cross sections for a heterogeneous geometry core.

97 MATHEMATICS AND COMPUTING↗

Measurement of neutrino induced charged current neutral pion production cross section at SciBooNE

SciBooNE is a neutrino scattering experiment located in the Booster Neutrino Beam at Fermilab. It collected data from June 2007 to August 2008 to accurately measure muon neutrino and anti-neutrino cross sections on carbon around 1 GeV neutrino energy. In this thesis we present the results on the measurement of the muon neutrino cross section resulting in a μ - plus a single π 0 final state (CC- π 0 channel). The present work will show the steps taken to achieve this result: from the reconstruction improvements to the background extraction. The flux-averaged CC - π 0 production cross section measurement obtained in this thesis < σCC- π 0 > Φ = (5.6 ± 1.9 fit ± 0.7 beam ± 0.5 int - 0.7 det ) × 10 -40 cm 2 /N at an average energy of 0.89 GeV is found to agree well both with the expectation from the Monte Ca

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Muon Neutrino Inclusive Charged Current Cross Section on Iron using the MINOS Detector

The Neutrinos at the Main Injector (NuMI) facility at Fermi National Accelerator Laboratory (FNAL) produces an intense muon neutrino beam used by the Main Injector Neutrino Oscillation Search (MINOS), a neutrino oscillation experiment, and the Main INjector ExpeRiment v-A, (MINERv A), a neutrino interaction experiment. Absolute neutrino cross sections are determined via σ v = N v /Φ v , where the numerator is the measured number of neutrino interactions in the MINOS Detector and the denominator is the flux of incident neutrinos. Many past neutrino experiments have measured relative cross sections due to a lack of precise measurements of the incident neutrino flux, normalizing to better established reaction processes, such as quasielastic neutrino-nucleon scattering. But recent measurements of neutrino interactions on nuclear targets have brought to light questions about our understanding of nuclear effects in neutrino interactions. In this thesis the v μ inclusive charged current cross section on iron is measured using the MINOS Detector. The MINOS detector consists of alternating planes of steel and scintillator. The MINOS detector is optimized to measure muons produced in charged current v μ interactions. Along with muons, these interactions produce hadronic showers. The neutrino energy is measured from the total energy the particles deposit in the detector. The incident neutrino flux is measured using the muons produced alongside the neutrinos in meson decay. Three ionization chamber monitors located in the downstream portion of the NuMI beamline are used to measure the muon flux and thereby infer the neutrino flux by relation to the underlying pion and kaon meson flux. This thesis describes the muon flux instrumentation in the NuMI beam, its operation over the two year duration of this measurement, and the techniques used to derive the neutrino flux.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Specification Section 01065S ES&H for Service Contracts

Section Includes: Requirements and guidelines in performance of work concerning protection of environment and property, and the safety and health of Contractors, Sandia National Laboratories (SNL) and Department of Energy (DOE) employees, visitors to SNL, and members of the public. This Section is applicable only to Service Contracts that do not involve construction or construction-like activities. Construction and construction-like activities are covered by Section 01065, Environment, Safety and Health (ES&H) for Construction Contracts. The entire ES&H program shall focus on safe-by-design intent, understanding the technical basis for the work, identifying and controlling energy sources, unacceptable consequences, risk assessments, and positive verification.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Carbon dioxide, hydrographic, and chemical data obtained during the R/Vs Roger Revelle and Thomas Thompson repeat hydrography cruises in the Pacific Ocean: CLIVAR CO 2 sections P16S-2005 (9 January - 19 February, 2005) and P16N-2006 (13 February - 30 March, 2006)

This report presents methods, and analytical and quality control procedures for salinity, oxygen, nutrients, total carbon dioxide (TCO 2 ), total alkalinity (TALK), pH, discrete CO 2 partial pressure (pCO 2 ), dissolved organic carbon (DOC), chlorofluorocarbons (CFCs), radiocarbon, δ13C, and underway carbon measurements performed during the P16S-2005 (9 January - 19 February 2005) and P16N-2006 (13 February - 30 March, 2006) cruises in the Pacific Ocean. The research vessel (R/V) Roger Revelle departed Papeete, Tahiti, on January 9, 2005 for the Repeat Section P16S, nominally along 150°W, ending in Wellington, New Zealand, on February 19. During this cruise, samples were taken from 36 depths at 111 CTD stations between 16°S and 71°S. The Repeat Section P16N, nominally along 152°W, consisted of two legs. Leg 1 started on February 13, 2006 in Papeete, Tahiti, and finished on March 3, in Honolulu, Hawaii. The R/V Thomas G. Thompson departed Honolulu for Leg 2 on March 10, 2006 and arrived in Kodiak, Alaska, on March 30. During the P16N cruises, samples were taken from 34 or 36 depths at 84 stations between 17°S and 56.28°N. The research conducted on these cruises was part of a series of repeat hydrography sections jointly funded by the National Oceanic and Atmospheric Administration (NOAA) and the National Science Foundation (NSF) as part of the Climate Variability Program (CLIVAR)/CO 2 Repeat Hydrography Program. The P16S and P16N data sets are available free of charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center (CDIAC). The NDP consists of the oceanographic data files and this printed documentation, which describes the procedures and methods used to obtain the data.

potentiometry↗

HARP targets pion production cross section and yield measurements. Implications for MiniBooNE neutrino flux

The prediction of the muon neutrino flux from a 71.0 cm long beryllium target for the MiniBooNE experiment is based on a measured pion production cross section which was taken from a short beryllium target (2.0 cm thick - 5% nuclear interaction length) in the Hadron Production (HARP) experiment at CERN. To verify the extrapolation to our longer target, HARP also measured the pion production from 20.0 cm and 40.0 cm beryllium targets. The measured production yields, d 2 N π± (p; θ )=dpd Ω, on targets of 50% and 100% nuclear interaction lengths in the kinematic rage of momentum from 0.75 GeV/c to 6.5 GeV/c and the range of angle from 30 mrad to 210 mrad are presented along with an update of the short target cross sections. The best fitted extended Sanford-Wang (SW) model parameterization for updated short beryllium target π + production cross section is presented. Yield measurements for all three targets are also compared with that from the Monte Carlo predictions in the MiniBooNE experiment for different SW parameterization. The comparisons of v μ flux predictions for updated SW model is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Measurement of $\nu_{\mu}$ Induced Charged-Current $\pi^0$ Production Cross Sections on Polystyrene at $E_{\bar{\nu}_{\mu}}$ 2-10 GeV

Understanding of the $\pi^0$ production via anti-neutrino-nucleus charged current interaction in the neutrino energy region of 1-10 GeV is essential for neutrino oscillation experiments. In this thesis, we present a measurement of charged current $\pi^0$ production from anti-muon neutrinos scattering on a polystyrene scintillator (CH) target in the MINER$\nu$A experiment. A method for selecting and reconstructing $CC\pi^0$ events is presented. The $\pi^0$ and $\mu^+$ are fully reconstructed in the final state allowing for the measurement of the final state kinematics and the neutrino energy. We describe the two methods developed in this analysis for \p0 reconstruction in the MINERvA experiment: Hough Transform and Angle Scan. Interacting neutrinos have energy $\sim3.0 GeV$ and $\pi^0$ have energy $\sim0.3GeV$. The total $CC\pi^0$ cross-section is presented as a function of neutrino energy and $Q^2$. The total Exclusive $CC\pi^0$ cross-section is presented as a function of neutrino energy, $Q^2$ and the final state kinematics. Cross Section ratio between Exclusive $CC\pi^0$ and Inclusive $CC\pi^0$ for data and Monte Carlo are presented. Neutrino beam data corresponding to $1.019 \times 10^{20}$ protons on target have been analyzed. For inclusive $CC\pi^0$ sample we reconstructed 891 events, and for exclusive $CC\pi^0$ sample we reconstructed 514 events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Strategy for alignment of electron beam trajectory in LEReC cooling section

We considered the steps required to align the electron beam trajectory through the LEReC cooling section. We devised a detailed procedure for the beam-based alignment of the cooling section solenoids. We showed that it is critical to have an individual control of each CS solenoid current. Finally, we modeled the alignment procedure and showed that with two BPM fitting the solenoid shift can be measured with 40 um accuracy and the solenoid inclination can be measured with 30 urad accuracy. These accuracies are well within the tolerances of the cooling section solenoid alignment.

43 PARTICLE ACCELERATORS↗

Placing Limits on the Higgs Production Cross Section at the Tevatron using the H → W + W - → ℓ + ℓ - Decay Channel

Limits on the Higgs production cross section at the Tevatron were placed using data with an integrated luminosity of 2.4 fb -1 from CDF. Limits over a Higgs mass range between 110 GeV and 200 GeV were determined, by calculating a limit at ten mass points distributed over this region. The analysis exclusively searches for Higgs produced by top-quark mediated gluon fusion and then decaying into two W bosons. Only leptonic decay channels of the W are considered, such that the final event signature consists of ee, eµ, or µµ with missing energy from undetected neutrinos. After an evaluation of alternative techniques, a neural net was selected as the best method for increasing the sensitivity of the measurement. The BFGS neural net training technique was selected as the most efficient method. A Bayesian Likelihood technique was used to place limits on the observed Higgs production cross section, and an expected limit was calculated by running 10,000 pseudo experiments. The 160 GeV mass point was the most most sensitive, achieving an expected limit 4.1 times the Standard Model prediction cross section at a 95% Confidence Level. Observed limits are within 1 σ of the expected limit below a mass point of ii 160 GeV. Above this, observed limits are higher than the expected limits, within 2 σ. The lowest observed limit was also at MH =160 GeV with a limit of 6.85 times the Standard Model prediction at a 95% Confidence Level. A new method for increasing the sensitivity of the measurement was proposed and investigated, but unused in the analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pion photoproduction cross section at large momentum transfer

The Real Compton Scattering experiment was performed in Hall A at the Thomas Jefferson National Accelerator Facility. It was designed to measure, for Compton scattering and π 0 -photoproduction, the differential cross section over a range of kinematic points and the polarisation transfer to the proton at a single kinematic point. The full range of the experiment in Mandelstam variables t and s was 1.6-6.46 GeV 2 and 4.82-10.92 GeV 2 respectively with beam energies of 2-6 GeV. The motivation for the experiment is to test the cross section and polarisation transfer predictions of perturbative QCD versus that of predictions from Generalised Parton Distribution models. This thesis will give an overview of the pertinent theory, experimental setup in Hall A and the extracting of the π 0 -photoproduction cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Elastic Ep Cross Section at Q2 = 0.66, 1.10, 1.51 and 1.65 Gev2

The nucleon form factors have been investigated by physicists for decades because of their fundamental importance. The world data of the proton magnetic form factor GMp has been focused on Q2 lower than 5 GeV2 and they have large uncertainties at higher Q2. Jefferson Lab experiment E12-07-108 aims to improve the accuracy of the e ? p elastic cross section to better than 2% over a Q2 range of 7 ? 14 GeV2. From 2015 to 2016, the e ? p elastic cross section was measured over a wide range of Q2 from 0.66 ? 12.56 GeV2 at the Thomas Jefferson National Accelerator Facility in Virginia, USA. An unpolarized electron beam was scattered o? a cryogenic hydrogen target and the scattered electron was detected in the high resolution spectrometers. This thesis focuses on the cross section calculations of the data taken in the spring of 2015, where Q2 = 0.66, 1.10, 1.51 and 1.66 GeV2. At Q2 = 0.66 GeV2, an uncertainty < 3% was achieved and < 5% was achieved for the other three Q2 at the moment. The results were compared with the world data and the good agreement provides confidence for the experimental measurements at higher Q2.

Wang, Yang↗

The Differential Cross Section and Λ Recoil Polarization from γδ -> Κ0(ρ)

Presented is the analysis of the differential cross section and Λ recoil polarization from the reaction γδ -> Κ0(ρ). This work measured these observables over beam energies from 0.90 GeV to 3.0 GeV. These measurements are the first in this channel to cover such a wide range of energies. The data were taken using the CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Laboratory (JLAB) along with a tagged photon beam. This analysis was completed by identifying events of interest that decayed into the final state topology of π-π+,π-&rho'(ρ). Through conservation of energy and momentum, the Κ0, Λ and missing mass of the spectator proton were reconstructed. Utilizing the same analysis techniques, the observables were measured on two different experiments with good agreement. Photoproduction of strange mesons from the neutron are difficult to measure, consequently there are only a few measurements of this kind. Despite that, these reactions supply essential complementary data to those on the proton. The differential cross sections and the recoil polarization extracted, span the region where new nucleon resonances have been found from studies of the reaction γρ -> Κ+Λ. Comparisons between the Κ+Λ and Κ0Λ cross section demonstrate that possible interference terms near 1900 MeV are less pronounced in the latter. This unexpected result inspired a partial wave analyses (PWA) to be fitted to the data. The fit solution shows that this measurement fostered an improvement on the knowledge of observed resonance parameters, necessary to understanding these excited states. The study of nucleon resonances is a key motivating factor since the resonance masses can be calculated from the theory of the strong nuclear force, called quantum chromodynamics, or QCD.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗