Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum circuits”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Enhanced quantum efficiency of amorphous silicon thin film solar cells with the inclusion of a rear-reflector thin film

We investigated the growth mechanism of amorphous silicon thin films by implementing hot-wire chemical vapor deposition and fabricated thin film solar cell devices. The fabricated cells showed efficiencies of 7.5 and 8.6% for the samples without and with the rear-reflector decomposed by sputtering, respectively. The rear-reflector enhances the quantum efficiency in the infrared spectral region from 550 to 750 nm. The more stable quantum efficiency of the sample with the inclusion of a rear-reflector than the sample without the rear-reflector due to the bias effect is related to the enhancement of the short circuit current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design and analysis of multi-hexagonal reversible encoder using photonic crystals

In this paper, a 4 × 2 reversible encoder with hexagonal lattice has been designed using two-dimensional photonic crystals with non-linear refractive index. In order to demonstrate the working of the encoder, we have used the multi-hexagonal shaped structure arranged in parallel with appropriate inclination to get the desired output. During its functionality as an encoder, more than 98% of the power is coupled at the output port to obtain logic 1 and less than 17.2% of the power is coupled for obtaining logic 0. In addition, during its functionality as a reversible encoder, the logic 1 and logic 0 correspond to 97.5% and 15.1%, respectively. The proposed encoder provides an improved contrast ratio of 12.18 dB and 11.5 dB for logical states of 01 and 10, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Acoustic logic gates and Boolean operation based on self-collimating acoustic beams

The reveal of self-collimation effect in two-dimensional (2D) photonic or acoustic crystals has opened up possibilities for signal manipulation. In this paper, we have proposed acoustic logic gates based on the linear interference of self-collimated beams in 2D sonic crystals (SCs) with line-defects. The line defects on the diagonal of the 2D square SCs are actually functioning as a 3 dB splitter. By adjusting the phase difference between two input signals, the basic Boolean logic functions such as XOR, OR, AND, and NOT are achieved both theoretically and experimentally. Due to the non-diffracting property of self-collimation beams, more complex Boolean logic and algorithms such as NAND, NOR, and XNOR can be realized by cascading the basic logic gates. The achievement of acoustic logic gates and Boolean operation provides a promising approach for acoustic signal computing and manipulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

InAs sidewall tunnel diodes enabled by surface states

Negative differential resistance (NDR), where the device current decreases with increasing bias voltage, is a representative phenomenon where quantum mechanics induces counterintuitive physical behavior and offers promising applications such as high-frequency oscillators, amplifiers, and multilevel logic circuits. While the NDR behavior has been extensively studied in various materials and devices, the role of surface properties in NDR, particularly in InAs-based diodes, remains underexplored. In this work, we report the observation of NDR in vertically structured InAs p + n diodes that exhibit a peak-valley current ratio of ∼6, which is suitably high for applications. Circumference-normalized current–voltage characterization revealed that the NDR originates from band-to-band tunneling between the valence band of p + -InAs and the conduction band of an n + -InAs surface, where the n + surface is due to surface states on otherwise n − -InAs. In addition, by comparing devices with various surface passivation methods (without intentional passivation, benzocyclobutene polymer, and silicon nitride), we found that the surface termination significantly affects the NDR characteristics. We present an equivalent circuit model to explain the observed device behavior. These findings offer insights into surface-enabled NDR phenomena and present new knobs for engineering NDR devices.

Circuit theorems↗

Design and analysis of logic NOR, NAND and XNOR gates based on interference effect

We have developed and analysed logic NOR, NAND and XNOR gates based on two dimensional (2D) photonic crystals at a wavelength of 1.55 μm. The interference and self-collimation effects are used to design logic gates, which control the output by adjusting the phase difference to achieve constructive or destructive interference. The splitter is a line defect of the photonic crystal with a row of periodically arranged air rods. The radius of the defect rods depends on the function of the logic element. The use of these logic gates can reduce the size of logic devices. (optical logic elements)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of GaInP Solar Cells Grown by Hydride Vapor Phase Epitaxy

We analyzed the performance of a simple n-on-p GaInP solar cell grown without surface passivation but with a back reflector by dynamic hydride vapor phase epitaxy (DHYPE). We employed a thin emitter because the lack of surface passivation limited collection in that layer. We obtained a maximum internal quantum efficiency of nearly 95% by using 1 x 10^16 cm^-3 base doping. This device exhibited an open circuit voltage (VOC) of 1.27 V, short circuit current (JSC) of 12.6 mA/cm^2 , a fill factor (FF) of 79.3%, and 12.8% efficiency. Limits on cell performance predominantly come from VOC and FF. A Suns-VOC analysis of this cell indicates that 5.5% (absolute) of the FF is lost to series resistance, which stems from a high contact resistance. Another 5.5% of FF loss results from elevated dark current, leading to non-ideal diode behavior. This behavior implies that improvement in bulk material quality through reduction in concentrations of non-radiative defects will improve cell performance.

14 SOLAR ENERGY↗

Dual Common Planes for Time Multiplexing of Dual-Color QWIPs

A proposed improved method of externally controlled time multiplexing of the readouts of focal-plane arrays of pairs of stacked quantum-well infrared photodetectors (QWIPs) that operate in different wavelength bands is based on a dual-detector-common-plane circuit configuration. The method would be implemented in a QWIP integrated-circuit chip hybridized with a readout integrated-circuit (ROIC) chip.

Rafol, Sir B.↗

High-speed programmable photonic circuits in a cryogenically compatible, visible–near-infrared 200 mm CMOS architecture

Abstract Recent advances in photonic integrated circuits have enabled a new generation of programmable Mach–Zehnder meshes (MZMs) realized by using cascaded Mach–Zehnder interferometers capable of universal linear-optical transformations on N input/output optical modes. MZMs serve critical functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and other applications. However, MZM implementations reported to date rely on thermo-optic phase shifters, which limit applications due to slow response times and high power consumption. Here we introduce a large-scale MZM platform made in a 200 mm complementary metal–oxide–semiconductor foundry, which uses aluminium nitride piezo-optomechanical actuators coupled to silicon nitride waveguides, enabling low-loss propagation with phase modulation at greater than 100 MHz in the visible–near-infrared wavelengths. Moreover, the vanishingly low hold-power consumption of the piezo-actuators enables these photonic integrated circuits to operate at cryogenic temperatures, paving the way for a fully integrated device architecture for a range of quantum applications.

47 OTHER INSTRUMENTATION↗

Wireless Josephson amplifier

Josephson junction parametric amplifiers are playing a crucial role in the readout chain in superconducting quantum information experiments. However, their integration with current 3D cavity implementations poses the problem of transitioning between waveguide, coax cables, and planar circuits. Moreover, Josephson amplifiers require auxiliary microwave components, like directional couplers and/or hybrids, that are sources of spurious losses and impedance mismatches that limit measurement efficiency and amplifier tunability. We have developed a wireless architecture for these parametric amplifiers that eliminates superfluous microwave components and interconnects. This greatly simplifies their assembly and integration into experiments. We present an experimental realization of such a device operating in the 9–11 GHz band with about 100 MHz of amplitude gain-bandwidth product, on par with devices mounted in conventional sample holders. The simpler impedance environment presented to the amplifier also results in increased amplifier tunability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analysis of the Ultra-fast Switching Dynamics in a Hybrid MOSFET/Driver

The turn-on dynamics of a power MOSFET during ultra-fast, {approx} ns, switching are discussed in this paper. The testing was performed using a custom hybrid MOSFET/Driver module, which was fabricated by directly assembling die-form components, power MOSFET and drivers, on a printed circuit board. By using die-form components, the hybrid approach substantially reduces parasitic inductance, which facilitates ultra-fast switching. The measured turn on time of the hybrid module with a resistive load is 1.2 ns with an applied voltage of 1000 V and drain current of 33 A. Detailed analysis of the switching waveforms reveals that switching behavior must be interpreted differently in the ultra-fast regime. For example, the gate threshold voltage to turn on the device is observed to increase as the switching time decreases. Further analysis and simulation of MOSFET switching behavior shows that the minimum turn on time scales with the product of the drain-source on resistance and drain-source capacitance, R{sub DS(on)}C{sub OSS}. This information will be useful in power MOSFET selection and gate driver design for ultra-fast switching applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling photovoltaic performance in periodic patterned colloidal quantum dot solar cells

Colloidal quantum dot (CQD) solar cells have attracted tremendous attention mostly due to their wide absorption spectrum window and potentially low processability cost. The ultimate efficiency of CQD solar cells is highly limited by their high trap state density. Here in this paper we show that the overall device power conversion efficiency could be improved by employing photonic structures that enhance both charge generation and collection efficiencies. By employing a two-dimensional numerical model, we have calculated the characteristics of patterned CQD solar cells based of a simple grating structure. Our calculation predicts a power conversion efficiency as high as 11.2%, with a short circuit current density of 35.2 mA/cm 2 , a value nearly 1.5 times larger than the conventional flat design, showing the great potential value of patterned quantum dot solar cells.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electroluminescence and absorption spectra of low-optical-loss semiconductor lasers based on InGaAs/AlGaAs/GaAs QW heterostructures

Spontaneous emission, optical loss, and gain spectra of a laser heterostructure with a quantum-well InGaAs active region have been studied at various optical and electrical pumping levels. It is shown that carrier accumulation in the active region under open-circuit conditions for the photocurrent leads to disappearance of the long-wavelength edge peak in the absorption spectrum. It is found that flowing photocurrent precludes accumulation of photogenerated carriers, with the result that the absorption spectrum retains its shape, irrespective of the optical pumping level. It is shown that many-particle effects of carrier interaction lead to a temperature-unrelated narrowing of the band gap in the InGaAs quantum-well active region by up to 30 meV and to tailing of the long-wavelength edge of the gain spectrum. As a result, a spectral range can be found for mesa-stripe laser diodes in which the gain in the region under the stripe contact is positive and the loss in passive regions is close to zero.

36 MATERIALS SCIENCE↗

Negative infrared photocurrent response in layered WS{sub 2}/reduced graphene oxide hybrids

We report high performance IR photocurrent response of two-dimensional hybrid materials consisting of layered WS{sub 2} nanosheets and reduced graphene oxide (RGO). Comparative photocurrent response studies of WS{sub 2} nanosheets, RGO, and WS{sub 2}/RGO hybrids were carried out by performing current-voltage (I-V) and time-dependent current measurements with a laser excitation source having a wavelength of 808 nm. The experimental investigations indicate that WS{sub 2}/RGO hybrids show negative photocurrent response, whereas WS{sub 2} and RGO show positive photocurrent response. The negative photocurrent response of the WS{sub 2}/RGO hybrids is explained using a band alignment diagram and attributed to a charge transfer mechanism between WS{sub 2} and RGO. This analysis is further corroborated by first-principles density functional calculations. The fabricated device based on WS{sub 2}/RGO hybrids shows a photosensitivity R{sub λ} of about 6 AW{sup −1} and a quantum efficiency η of ∼924%, which demonstrates high sensitivity of the hybrid material towards IR detection. WS{sub 2}/RGO hybrids are therefore promising candidates for potential applications in optoelectronic circuits and low cost, high performance, and reliable photodetectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic superconductivity of niobium based on its response to nonmagnetic disorder

Niobium is one of the most studied superconductors, both theoretically and experimentally. It is tremendously important for applications, and it has the highest superconducting transition temperature, T c = 9.32 K, of all pure metals. In addition to power applications in alloys, pure niobium is used for sensitive magnetosensing, radio-frequency cavities, and, more recently, as circuit metallization layers in superconducting qubits. A detailed understanding of its electronic and superconducting structure, especially its normal and superconducting state anisotropies, is crucial for mitigating the loss of quantum coherence in such devices. Recently, a microscopic theory of the anisotropic properties of niobium with the disorder was put forward. To verify theoretical predictions, we studied the effect of disorder produced by 3.5 MeV proton irradiation of thin Nb films grown by the same team and using the same protocols as those used in transmon qubits. By measuring the superconducting transition temperature and upper critical fields, we show a clear suppression of T c by potential (nonmagnetic) scattering, which is directly related to the anisotropic order parameter. Here, we obtain a very close quantitative agreement between the theory and the experiment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum funneling in blended multi-band gap core/shell colloidal quantum dot solar cells

Multi-band gap heterojunction solar cells fabricated from a blend of 1.2 eV and 1.4 eV PbS colloidal quantum dots (CQDs) show poor device performance due to non-radiative recombination. To overcome this, a CdS shell is epitaxially formed around the PbS core using cation exchange. From steady state and transient photoluminescence measurements, we understand the nature of charge transfer between these quantum dots. Photoluminescence decay lifetimes are much longer in the PbS/CdS core/shell blend compared to PbS only, explained by a reduction in non-radiative recombination resulting from CdS surface passivation. PbS/CdS heterojunction devices sustain a higher open-circuit voltage and lower reverse saturation current as compared to PbS-only devices, implying lower recombination rates. Further device performance enhancement is attained by modifying the composition profile of the CQD species in the absorbing layer resulting in a three dimensional quantum cascade structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Description of reaction and vibrational energetics of CO 2 –NH 3 interaction using quantum computing algorithms

CO 2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO 2 . Thus, it is crucial to study the chemical absorption of CO 2 by amine-based solvents to better understand and optimize CO 2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO 2 and a simplified amine-based solvent model—NH 3 . Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular vibrational calculations by including anharmonicity. We implement a variational quantum eigensolver (VQE) algorithm in a quantum simulator to calculate ground state vibrational energies of reactants and products of the CO 2 and NH 3 reaction. The VQE calculations yield ground vibrational energies of CO 2 and NH 3 with similar accuracy to classical computing. In the presence of hardware noise, Compact Heuristic for Chemistry (CHC) ansatz with shallower circuit depth performs better than Unitary Vibrational Coupled Cluster. The “Zero Noise Extrapolation” error-mitigation approach in combination with CHC ansatz improves the vibrational calculation accuracy. Excited vibrational states are accessed with quantum equation of motion method for CO 2 and NH 3 . Using quantum Hartree–Fock (HF) embedding algorithm to calculate electronic energies, the corresponding reaction profile compares favorably with Coupled Cluster Singles and Doubles while being more accurate than HF. Our research showcases quantum computing applications in the study of CO 2 capture reactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterizing performances of solder paste printing process at flexible manufacturing lines

Solder paste printing (SPP) has been a challenge on printed circuit board (PCB) manufacturing, evident by the proliferation of solder paste inspection equipment, or substituted by rigorous non-value added activity of manual inspections. The objective of this study is to characterize the SPP performance of various products manufactured in flexible production lines with different equipment configurations, and determine areas for process improvement. The study began by collecting information on SPP performance relative to component placement (CP) process, and to the proportion of mixed products. Using a clustering algorithm to group similar elements together, SPP performance across all product-production line pairs are statistically modeled to discover the trend and the influential factors. The main findings are: (a) Ratio of overall dpku for CP and SPP processes are 2:1; (b) logistic regression models of SPP performance indicated that only effects of product-production line and solder paste printer configuration are significant; (c) PCB circuitry design with BGA components and single solder paste printer line configurations generated the highest monthly defects, with the highest variation in the latter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗