Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “power efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Short-pulse excitation of microwave plasma for efficient diamond growth

To realize a variety of potential applications of diamonds, particularly in the area of power electronics, it is indispensable to improve their growth efficiency. Most conventional approaches have tried to achieve this simply by increasing the gas temperature; however, this makes it difficult to grow large diamond crystals. To improve the growth efficiency while lowering the gas temperature, we propose that using a pulse-modulated microwave plasma with a sub-millisecond pulse width can enhance the power efficiency of the growth rate of single-crystal diamonds. We found that using a sub-millisecond pulse-mode discharge could almost double the growth rate obtained using continuous mode discharge for a fixed average microwave power and gas pressure. A comparison between experimental observations of the optical emission spectra of the discharge and a numerical simulation of the gas temperature suggests that a decrease in the gas temperature was achieved, and highlights the importance of electron-dominated reactions for obtaining the enhancement of the growth rate. This result will have a large impact in the area of diamond growth because it enables diamond growth to be more power efficient at reduced temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-Performance Non-fullerene organic solar cells enabled by noncovalent Conformational locks and Side-Chain engineering

Three novel small molecular acceptors (SMAs) BO-2F, BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T:BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Finally, our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs.

14 SOLAR ENERGY↗

Enhancing Photostability of Sn-Pb Perovskite Solar Cells by an Alkylammonium Pseudo-Halogen Additive

High-performance tin-lead perovskite solar cells (PSCs) are needed for all-perovskite-tandem solar cells. However, iodide related fast photodegradation severely limits the operational stability of Sn-Pb perovskites despite the demonstrated high efficiency and thermal stability. Herein, this work employs an alkylammonium pseudo-halogen additive to enhance the power conversion efficiency (PCE) and photostability of methylammonium (MA)-free, Sn-Pb PSCs. Density functional theory (DFT) calculations reveal that the pseudo-halogen tetrafluoroborate (BF 4 - ) has strong binding capacity with metal ions (Sn 2+ /Pb 2+ ) in the Sn-Pb perovskite lattice, which lowers iodine vacancy formation. Upon combining BF 4 - with an octylammonium (OA + ) cation, the PCE of the device with a built-in light-scattering layer is boosted to 23.7%, which represents a new record for Sn-Pb PSCs. The improved efficiency benefits from the suppressed defect density. Under continuous 1 sun illumination, the OABF 4 embodied PSCs show slower generation of interstitial iodides and iodine, which greatly improves the device photostability under open-circuit condition. Moreover, the device based on OABF 4 retains 88% of the initial PCE for 1000 h under the maximum-power-point tracking (MPPT) without cooling.

14 SOLAR ENERGY↗

Gas core reactors for actinide transmutation and breeder applications

This work consists of design power plant studies for four types of reactor systems: uranium plasma core breeder, uranium plasma core actinide transmuter, UF6 breeder and UF6 actinide transmuter. The plasma core systems can be coupled to MHD generators to obtain high efficiency electrical power generation. A 1074 MWt UF6 breeder reactor was designed with a breeding ratio of 1.002 to guard against diversion of fuel. Using molten salt technology and a superheated steam cycle, an efficiency of 39.2% was obtained for the plant and the U233 inventory in the core and heat exchangers was limited to 105 Kg. It was found that the UF6 reactor can produce high fluxes (10 to the 14th power n/sq cm-sec) necessary for efficient burnup of actinide. However, the buildup of fissile isotopes posed severe heat transfer problems. Therefore, the flux in the actinide region must be decreased with time. Consequently, only beginning-of-life conditions were considered for the power plant design. A 577 MWt UF6 actinide transmutation reactor power plant was designed to operate with 39.3% efficiency and 102 Kg of U233 in the core and heat exchanger for beginning-of-life conditions.

Clement, J. D.↗

Unidirectional Sidechain Engineering to Construct Dual‐Asymmetric Acceptors for 19.23 % Efficiency Organic Solar Cells with Low Energy Loss and Efficient Charge Transfer

Abstract Achieving both high open‐circuit voltage ( V oc ) and short‐circuit current density ( J sc ) to boost power‐conversion efficiency (PCE) is a major challenge for organic solar cells (OSCs), wherein high energy loss ( E loss ) and inefficient charge transfer usually take place. Here, three new Y‐series acceptors of mono‐asymmetric asy‐YC11 and dual‐asymmetric bi‐asy‐YC9 and bi‐asy‐YC12 are developed. They share the same asymmetric D 1 AD 2 (D 1 =thieno[3,2‐ b ]thiophene and D 2 =selenopheno[3,2‐ b ]thiophene) fused‐core but have different unidirectional sidechain on D 1 side, allowing fine‐tuned molecular properties, such as intermolecular interaction, packing pattern, and crystallinity. Among the binary blends, the PM6 : bi‐asy‐YC12 one has better morphology with appropriate phase separation and higher order packing than the PM6 : asy‐YC9 and PM6 : bi‐asy‐YC11 ones. Therefore, the PM6 : bi‐asy‐YC12‐based OSCs offer a higher PCE of 17.16 % with both high V oc and J sc , due to the reduced E loss and efficient charge transfer properties. Inspired by the high V oc and strong NIR‐absorption, bi‐asy‐YC12 is introduced into efficient binary PM6 : L8‐BO to construct ternary OSCs. Thanks to the broadened absorption, optimized morphology, and furtherly minimized E loss , the PM6 : L8‐BO : bi‐asy‐YC12‐based OSCs achieve a champion PCE of 19.23 %, which is one of the highest efficiencies among these annealing‐free devices. Our developed unidirectional sidechain engineering for constructing bi‐asymmetric Y‐series acceptors provides an approach to boost PCE of OSCs.

Chemistry↗

High‐Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness

Industrial printing production of organic solar cells (OSCs) requires high power conversion efficiency (PCE) with wide toleration of active layer thickness. Herein, high‐efficiency thick‐film OSCs are demonstrated using a polymer fibril network strategy (FNS), which involves a donor polymer (PT2) that can self‐assemble into fibril nanostructure, and two nonfullerene acceptors with different crystalline properties. The fibril network can form a high‐speed hole transport channel and the addition of IDIC as a third component in active layers can improve the electron transport. As a result, the OSCs show high PCEs of ≈12% with wide toleration of active layer thickness (from 100 to 500 nm). The results indicate that FNS is a promising approach for the fabrication of highly efficient thick‐film PSCs, which can facilitate the commercialization of OSCs.

Weng, Kangkang↗

High Performance Power Module for Hall Effect Thrusters

Previous efforts to develop power electronics for Hall thruster systems have targeted the 1 to 5 kW power range and an output voltage of approximately 300 V. New Hall thrusters are being developed for higher power, higher specific impulse, and multi-mode operation. These thrusters require up to 50 kW of power and a discharge voltage in excess of 600 V. Modular power supplies can process more power with higher efficiency at the expense of complexity. A 1 kW discharge power module was designed, built and integrated with a Hall thruster. The breadboard module has a power conversion efficiency in excess of 96 percent and weighs only 0.765 kg. This module will be used to develop a kW, multi-kW, and high voltage power processors.

Pinero, Luis R.↗

Metal Oxide-Induced Instability and Its Mitigation in Halide Perovskite Solar Cells

Halide perovskite solar cells (PSCs) have emerged as a promising photovoltaic technology for sustainable energy solutions due to their impressive power conversion efficiency and a path to be manufactured by low-cost, high-throughput methods. To reach PSCs’ full potential for practical implementation, it is crucial to solving the issues related to its long-term operational stability. Furthermore, given that PSCs consist of many layers of dissimilar materials which form multiple internal interfaces, it is prudent to examine whether there exist interfacial interactions, most importantly between transport layers and perovskite absorbers, that can trigger device performance and instability. In this perspective, we bring to the attention of the PSC research community the lesser-known interfacial degradation of halide perovskites promoted by contact with metal oxide transport layers and highlight the deleterious effects on the PSCs’ performance and stability. We also discuss various mitigation strategies that have shown promises to achieve high-performing and stable PSCs.

14 SOLAR ENERGY↗

Hexaazatrinaphthylene Derivatives: Efficient Electron‐Transporting Materials with Tunable Energy Levels for Inverted Perovskite Solar Cells

Abstract Hexaazatrinaphthylene (HATNA) derivatives have been successfully shown to function as efficient electron‐transporting materials (ETMs) for perovskite solar cells (PVSCs). The cells demonstrate a superior power conversion efficiency (PCE) of 17.6 % with negligible hysteresis. This study provides one of the first nonfullerene small‐molecule‐based ETMs for high‐performance p–i–n PVSCs.

Zhao, Dongbing↗

Charged Hole‐Transporting Materials Based on Imidazolium for Defect Passivation in Inverted Perovskite Solar Cells

The hole‐transporting material (HTM) in perovskite solar cells (PSCs) provides an ideal interface with the perovskite layer for hole collection while influencing the perovskite crystalline structure and morphology. This article presents SIM and DIM, two new dopant‐free imidazolium‐based HTMs with charged units accompanied by counter ions that show the potential to function as ionic HTMs and ionic liquid additives and help improve the efficiency and stability of inverted PSCs. DIM‐based PSCs demonstrates exceptional performance with a high‐power conversion efficiency of 19.15%, attributed to improved passivation of perovskite interface defects. Furthermore, these new imidazolium salt‐based HTMs can be manufactured economically, making them a viable option for mass production and PSC commercialization.

Tingare, Yogesh S.↗

Effect of nano particle sizes on the third-order optical non-linearities and nanostructure of copolymer P3HT:PCBM thin film for organic photovoltaics

Highlights: • Active layer (P3HT:PCBM) has been deposited on substrate type by spin coating at 1000 rpm. • The device was completed by evaporating a 60 nm thick, circular gold electrodes onto the P3HT:PCBM. • Nonlinear refractive indices of the three particle sizes are found to be of the order of 10{sup −7} cm{sup 2}/W - Abstract: Organic solar cells are based on (3-hexylthiophene):[6,6]-phenyl C61-butyric acid with methyl ester Bulk Heterojunction. An inverted structure has been fabricated using nano-anatase crystalline titanium dioxide, as the electron transport layer, which was prepared on either the Indium Tin Oxide coated glass (ITO—glass), or Silicon wafer, as well as on glass substrates by the sol–gel method, at different spin speed, using the spin-coating system. The effect of thickness on the surface morphology and on the optical properties of TiO{sub 2} layer, was investigated using the Atomic Force Microscopy (AFM), X-ray diffraction, and UV–visible spectrophotometer. The samples were examined to feature currents and voltages, in the darkness and light extraction efficiency of the solar cell. The highest open-circuit voltage, V{sub oc}, and power conversion efficiency were 0.66% and 0.39%, fabricated with 90 nm, respectively. The non-linear optical properties of nano-anatase TiO{sub 2} sol–gel, were investigated at different particle sizes, using the z-scan technique.

36 MATERIALS SCIENCE↗

Combustion synthesized CeO{sub 2} as an anodic material in dye sensitized solar cells

Highlights: • One-step combustion synthesis of CeO{sub 2}. • Application of synthesized material as an anodic material for DSSC. • DSSC using CeO{sub 2} displayed an efficiency of 1.84%. - Abstract: Cerium oxide (CeO{sub 2}) has received a considerable attention due to its capacity to absorb visible light, low cost, high stability and environmental friendly catalytic applications. Among the various techniques employed to synthesize CeO{sub 2}, solution combustion synthesis is a one-step, economic and effective process. In this work, we report application of combustion synthesized CeO{sub 2} as an anodic material in the dye sensitized solar cell (DSSC). The synthesized material were characterized using standard analytical techniques such as XRD, SEM, BET, UV-DRS, and TEM. DSSC was fabricated using the synthesized material and characterized for incident photon to current conversion efficiency (IPCE), current density-voltage (J-V) measurements and electrochemical impedance spectroscopy. The power conversion efficiency of solar cell was found to be 1.84%. This is the first study to report use of combustion synthesized CeO{sub 2} for DSSC application.

36 MATERIALS SCIENCE↗

Thermal Conversion of Ultrathin Nickel Hydroxide for Wide Band Gap 2D Nickel Oxides

Wide band gap (WBG) semiconductors (E g > 2.0 eV) are integral to the advancement of next-generation electronics, optoelectronics, and power industries owing to their capability for high-temperature operation, high breakdown voltage, and efficient light emission. Enhanced power efficiency and functional performance can be attained through miniaturization, specifically via the integration of device fabrication into a two-dimensional (2D) structure enabled by WBG 2D semiconductors. However, as an essential subgroup of WBG semiconductors, 2D transition metal oxides (TMOs) remain largely underexplored in terms of physical properties and applications in 2D optoelectronic devices, primarily due to the scarcity of sufficiently large 2D crystals. Thus, our goal is to develop synthesis pathways for 2D TMOs possessing large crystal domains (e.g., >10 μm), expanding the 2D TMO family and providing insights for future engineering of 2D TMOs. Here, we demonstrate the synthesis of WBG 2D nickel oxide (NiO) (E g > 2.7 eV) thermally converted from 2D nickel hydroxide (Ni(OH) 2 ) with a lateral domain size larger than 10 μm. Moreover, the conversion process is investigated using various microscopic techniques, such as atomic force microscopy, Raman spectroscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy, providing significant insights into morphology and structural variations under different oxidative conditions. The electronic structure of the converted Ni x O y is further investigated using multiple soft X-ray spectroscopies, such as X-ray absorption and emission spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrating Energy-Efficient Computing with Computational Research to Accelerate Energy Technology

NREL's computational sciences center hosts the largest high performance computing (HPC) capabilities dedicated to energy research while functioning as a living laboratory for energy-efficient computing. NREL's HPC capabilities support the research needs of the Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE). In ten years of operation, HPC use in EERE-sponsored research has grown by a factor of 30, including work in electricity generation, energy efficiency, transportation, and energy system modeling. This paper analyzes this research portfolio, providing examples of individual use cases. The paper documents NREL's history of operating one of the world's most energy-efficient data centers while examining pathways to reduce economic and environmental impact beyond reduction of Power Usage Efficiency (PUE). This paper concludes by examining the unique opportunities created for accelerating improvements in data center efficiency created by combining an HPC system dedicated to energy research and a research program in energy-efficient computing.

97 MATHEMATICS AND COMPUTING↗

EVSE Characterization, A Next-Gen Profiles Project Report

As part of the U.S. DOE EVs@Scale consortium Next-Generation Profiles project, results and analysis from the characterization of high-power conductive and wireless charging infrastructure are presented. This characterization was conducted over a wide range of DC output current and DC voltage charging for nominal test conditions and off-nominal test conditions. Test plans and procedures were developed to define the test configurations and requirements, measurement parameters, and test procedures used throughout testing. Results from a 2023 study conducted on electric vehicle supply equipment (EVSE) characterization by Idaho National Laboratory (INL) and Oak Ridge National Laboratory (ORNL) include one 350 kW capable EVSE using a liquid-cooled combined charging system-1 (CCS-1, North American version) cable and connector and an ORNL-developed 100-kW polyphase wireless charger. Characterization results during nominal operation show the AC-to-DC power transfer efficiency for the 350kW conductive EVSE is 95.1% peak and is >92% when the AC power is at least 50 kW. The power quality of the 350 kW conductive EVSE is also measured during nominal conditions. The power factor is >0.91 for power transfer above 50 kW AC input during nominal conditions with a maximum power factor of 0.975. The AC current harmonics produced by the EVSE as measured at the AC input connection to the EVSE is <25% harmonics for power transfer greater than 50 kW and <10% harmonics for power transfer greater than 180 kW.

25 ENERGY STORAGE↗

Self-Leveling Inks for Printing Ultra-uniform Perovskite Solar Modules by Flexography

The report describes the development of scalable manufacturing methods for high-performance, stable perovskite solar modules using flexographic printing. The project developed self-leveling perovskite inks that exploit Marangoni flows to reduce coating defects and improve large-area film uniformity. Bayesian optimization was integrated with high-throughput photoluminescence mapping and photovoltaic measurements to efficiently optimize ink formulations and printing conditions. The resulting printed perovskite solar cells achieved champion power conversion efficiencies above 21.6%, with median efficiencies exceeding 20% across large device batches. At the module scale, printed devices achieved active-area efficiencies up to approximately 17.3% on 25 cm² substrates. The project also demonstrated improved performance and stability using additively patterned interconnections compared with laser-scribed controls. Overall, the work establishes a data-driven, roll-compatible pathway toward high-throughput, low-capital-cost manufacturing of uniform and stable perovskite photovoltaics.

14 SOLAR ENERGY↗