Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Multiple extremal eigenpairs by the power method

We report the production and benchmarking of several refinements of the power method that enable the computation of multiple extremal eigenpairs of very large matrices. In these refinements we used an observation by Booth that has made possible the calculation of up to the 10th eigenpair for simple test problems simulating the transport of neutrons in the steady state of a nuclear reactor. Here, we summarize our techniques and efforts to-date on determining mainly just the two largest or two smallest eigenpairs. To illustrate the effectiveness of the techniques, we determined the two extremal eigenpairs of a cyclic matrix, the transfer matrix of the two-dimensional Ising model, and the Hamiltonian matrix of the one-dimensional Hubbard model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time series analysis and Monte Carlo methods for eigenvalue separation in neutron multiplication problems

A time series approach has been applied to the nuclear fission source distribution generated by Monte Carlo (MC) particle transport in order to calculate the non-fundamental mode eigenvalues of the system. The novel aspect is the combination of the general technical principle of projection pursuit for multivariate data with the neutron multiplication eigenvalue problem in the nuclear engineering discipline. Proof is thoroughly provided that the stationary MC process is linear to first order approximation and that it transforms into one-dimensional autoregressive processes of order one (AR(1)) via the automated choice of projection vectors. The autocorrelation coefficient of the resulting AR(1) process corresponds to the ratio of the desired mode eigenvalue to the fundamental mode eigenvalue. All modern MC codes for nuclear criticality calculate the fundamental mode eigenvalue, so the desired mode eigenvalue can be easily determined. This time series approach was tested for a variety of problems including multi-dimensional ones. Numerical results show that the time series approach has strong potential for three dimensional whole reactor core. The eigenvalue ratio can be updated in an on-the-fly manner without storing the nuclear fission source distributions at all previous iteration cycles for the mean subtraction. Lastly, the effects of degenerate eigenvalues are investigated and solutions are provided.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Modelling of water wave interaction with multiple cylinders of arbitrary shape

This paper describes the development of an efficient numerical model, namely scaled boundary finite-element method (SBFEM) for linear waves interaction with cylindrical structures of arbitrary shapes. The two-dimensional Helmholtz equation is firstly weakened in the circumferential direction, so that the governing partial differential equation is transformed to an ordinary matrix differential equation in radial direction, and is solved fully analytically. As a key element, a virtual porous circular cylinder surrounding the cylindrical structures is introduced so that the entire computational domain is partitioned along the virtual cylinder into an unbounded and several bounded sub-domains with common interfaces. The principle innovation is that, the present SBFEM model chooses Hankel function as a base solution for the unbounded sub-domain, while a power series is used for the internal bounded sub-domains. The approach discretises only the common interfaces of the sub-domains with surface finite-elements, and fewer elements are required to obtain very accurate results. Numerical simulations show that the new SBFEM model offers a considerable improvement by far in its numerical performance, as well as in the range of physical phenomena that is capable of simulating. The wave forces and run-ups are presented for a single and multiple cylindrical structures of different cross sectional shapes. Influences of the incident wave parameters and structural configurations on the hydrodynamics are examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A curvilinear, fully implicit, conservative electromagnetic PIC algorithm in multiple dimensions

Here, we extend a recently proposed fully implicit PIC algorithm for the Vlasov–Darwin model in multiple dimensions (Chen and Chacón (2015) [1]) to curvilinear geometry. As in the Cartesian case, the approach is based on a potential formulation (Φ, A), and overcomes many difficulties of traditional semi-implicit Darwin PIC algorithms. Conservation theorems for local charge and global energy are derived in curvilinear representation, and then enforced discretely by a careful choice of the discretization of field and particle equations. Additionally, the algorithm conserves canonical-momentum in any ignorable direction, and preserves the Coulomb gauge ∇ • A = 0 exactly. An asymptotically well-posed fluid preconditioner allows efficient use of large cell sizes, which are determined by accuracy considerations, not stability, and can be orders of magnitude larger than required in a standard explicit electromagnetic PIC simulation. We demonstrate the accuracy and efficiency properties of the algorithm with numerical experiments in mapped meshes in 1D-3V and 2D-3V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An energy-conserving method for stochastic Maxwell equations with multiplicative noise

In this paper, it is shown that three-dimensional stochastic Maxwell equations with multiplicative noise are stochastic Hamiltonian partial differential equations possessing a geometric structure (i.e. stochastic multi-symplectic conservation law), and the energy of system is a conservative quantity almost surely. We propose a stochastic multi-symplectic energy-conserving method for the equations by using the wavelet collocation method in space and stochastic symplectic method in time. Numerical experiments are performed to verify the excellent abilities of the proposed method in providing accurate solution and preserving energy. The mean square convergence result of the method in temporal direction is tested numerically, and numerical comparisons with finite difference method are also investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accelerating high-order continuum kinetic plasma simulations using multiple GPUs

Kinetic plasma simulations solve the Vlasov-Poisson or Vlasov-Maxwell equations to evolve scalar-variable distribution functions in position-velocity phase space and vector-variable electromagnetic fields in configuration space. The immense computational cost of evolving high-dimensional variables, and their large number of degrees of freedom, often limits the utility of continuum kinetic simulations and presents a challenge when it comes to accurately simulating real-world physical phenomena. To address this challenge, we present techniques that accelerate and minimize the computational work required for a scalable Vlasov-Poisson solver. We show theoretical hardware compute and communication bounds for solving a fourth-order finite-volume Vlasov-Poisson system. These bounds are then used to inform and evaluate the design of performance portable algorithms for a multiple graphics processing unit (GPU) accelerated version of the Vlasov-Poisson solver VCK-CPU [1]. We demonstrate that the multi-GPU Vlasov solver implementation, VCK-GPU, simultaneously minimizes required inter-process data transfer while also being bounded by the machine network performance limits. This results in an overall strong scaling speedup per timestep of up to 40x in three-dimensional phase space (one position, two velocity coordinates) and 54x in four dimensional phase space (two position, two velocity coordinates) and a 341x increase in simulation throughput of the GPU accelerated code over the existing CPU code. The GPU code is also able to weak scale up to 256 compute nodes and 1024 GPUs. In conclusion, we demonstrate that the improved compute performance enables exploring configurations which were previously computationally infeasible, including resolving fine-scale distribution function filamentation and multi-species dynamics with realistic electron-proton mass ratios.

Continuum kinetics↗

A web-based decision support system for collaborative mitigation of multiple water-related hazards using serious gaming

The paper presents a web-based application developed as a medium for executing a serious game to enhance multi-jurisdictional collaborative planning and decision making for mitigation of multiple hazards related to water (i.e., floods, soil erosions, water quality). The gaming application is integrated into the Iowa Watershed Decision Support System (IoWaDSS) designed to serve as a comprehensive multi-sectoral data repository along with the simulation results of process modeling to educate and inform communities on the status of their watersheds during extreme conditions. The interactive serious gaming application was devised to encourage public engagement, facilitate communication and positive relationship between watershed communities, and make the decision process more attractive and transparent for the stakeholders. The web environment offers easily-accessible, user-friendly interfaces that match the skills and knowledge level of a non-technical user. Developed with adaptive design and flexible architecture, the gaming application is generalizable and extendable to support hazard mitigation in other watersheds.

54 ENVIRONMENTAL SCIENCES↗

Multiple contributions to electrostrain in high performance PbTiO 3 –Bi(Ni 1/2 Hf 1/2 )O 3 piezoceramics triggered by phase transformation

Piezoelectric materials, which mechanically respond to electrical stimulation and vice versa, typically exhibit high piezoelectricity at a morphotropic phase boundary (MPB). A thorough structural description is essential for understanding the origin of excellent piezoelectric properties. In this work, a comparative study of electric-field-driven structure and phase evolution has been conducted on MPB and non-MPB tetragonal composition in high performance system of PbTiO 3 -Bi(Ni 1/2 Hf 1/2 )O 3 piezoceramics using in situ high-energy synchrotron X-ray diffraction. The results show that the MPB composition exhibits electric-field-driven reversible tetragonal-to-monoclinic transformation, whereas non-MPB composition does not. Direct evidence shows that the extensive phase transformation triggers multiple contributions to enhancing piezoelectric performance. Namely, it not only enables the unit cell parameters of coexisting phases easily change with an external electric field, but also enhances the domain switching and lattice strain. These results offer a unique perspective on MPB associated piezoelectricity enhancement, and will be helpful for developing high performance piezoelectric materials.

36 MATERIALS SCIENCE↗

Nitrate vulnerability projections from Bayesian inference of multiple groundwater age tracers

Nitrate is a major source of contamination of groundwater in the United States and around the world. We tested the applicability of multiple groundwater age tracers ( 3 H, 3 He, 4 He, 14 C, 13 C, and 85 Kr) in projecting future trends of nitrate concentration in 9 long-screened, public drinking water wells in Turlock, California, where nitrate concentrations are increasing toward the regulatory limit. Very low 85 Kr concentrations and apparent 3 H/ 3 He ages point to a relatively old modern fraction (40–50 years), diluted with pre-modern groundwater, corroborated by the onset and slope of increasing nitrate concentrations. An inverse Gaussian–Dirac model was chosen to represent the age distribution of the sampled groundwater at each well. Model parameters were estimated using a Bayesian inference, resulting in the posterior probability distribution – including the associated uncertainty – of the parameters and projected nitrate concentrations. Three scenarios were considered, including combined historic nitrate and age tracer data, the sole use of nitrate and the sole use of age tracer data. Each scenario was evaluated based on the ability of the model to reproduce the data and the level of reliability of the nitrate projections. The tracer-only scenario closely reproduced tracer concentrations, but not observed trends in the nitrate concentration. Both cases that included nitrate data resulted in good agreement with historical nitrate trends. Use of combined tracers and nitrate data resulted in a narrower range of projections of future nitrate levels. However, use of combined tracer and nitrate resulted in a larger discrepancy between modeled and measured tracers for some of the tracers. In conclusion, despite nitrate trend slopes between 0.56 and 1.73 mg/L/year in 7 of the 9 wells, the probability that concentrations will increase to levels above the MCL by 2040 are over 95% for only two of the wells, and below 15% in the other wells, due to a leveling off of reconstructed historical nitrate loadings to groundwater since about 1990.

54 ENVIRONMENTAL SCIENCES↗

Assessing changes in US regional precipitation on multiple time scales

We estimate trends in US regional precipitation on multiple time spans and scales relevant to the detection of changes in climatic regimes. A large literature has shown that trend estimation in hydrological series may be affected by long-term persistence (LTP) and selection of sample length. We show that 2000-year proxy-based reconstructions of the Palmer Modified Drought Index for the US Southeast (SE) and Pacific Coast (PC) regions exhibit LTP and reveal post- 1900 changes to be within the range of longer-term natural fluctuations. We also use a new data base of daily precipitation records for 20 locations (10 PC and 10 SE) extending back in many cases to the 1870s. Over the 1901–2017 interval upward trends in some measures of average and extreme precipitation appear, but they are not consistently significant and in the full records back to 1872 they largely disappear. Furthermore, they also disappear or reverse in the post-1978 portion of the data set, which is inconsistent with them being responses to enhanced greenhouse gas forcing. We conclude that natural variability is likely the dominant driver of historical changes in precipitation and hence drought dynamics in the US SE and PC.

54 ENVIRONMENTAL SCIENCES↗

Extend NdJ relationship with the size, multiple exchanges and Dzyaloshinskii-Moriya interaction for Néel skyrmions in hexagonal magnetic interfaces

For the integration with other parts of spintronic devices, it is desired to minimize the size of skyrmions to a nanometer scale. To provide a theoretical guidance for this endeavour, we established an extended NdJ relationship between the skyrmion size and fundamental magnetic properties of two-dimensional hexagonal ferromagnetic lattices, including multiple exchanges between different neighbors (J 1 -J 4 ), Dzyaloshinskii-Moriya interactions (d 1 and d 2 ) and on-site magnetic anisotropy energy. We demonstrated the applicability of this approach through density functional theory and spin spiral calculations for several interface, e.g., Co/Gra, Rh/Gra, Co/Pt 3 and MgO/Co/Pt 3 , and showed that the size of Néel skyrmions can be effectively reduced by either enhancing d or more conveniently reducing J through cancelation of J i s.

36 MATERIALS SCIENCE↗

Stiffening of nanoscale anatase Ti[subscript 0.9]Zr[subscript 0.1]O[subscript 2] upon multiple compression cycles

The compression behavior of nanoscale Zr-doped anatase was studied by means of a diamond anvil cell experiment with alternating cycles of compression and decompression in the stability field of anatase (up to 13 GPa). We found that multiple cycles of compression lead to stiffening of the material: Precompressed samples of nanoanatase Ti{sub 0.9}Zr{sub 0.1}O{sub 2} have a higher bulk modulus (K{sub 0} = 249(9) and 266(6) GPa) compared with the sample when compressed for the first time (K{sub 0} = 211(7) GPa). Upon compression, the crystallite size remains the same and the crystalline areas are free of defects. After the experiment, the crystallites are surrounded by amorphous rims, confirming the theoretical prediction by Pischedda et al. [Ultrastability and enhanced stiffness of similar to 6 nm TiO{sub 2} nanoanatase and eventual pressure-induced disorder on the nanometer scale, Phys. Rev. Let. 96 (2006) 035509] for nanoscale anatase, but yielding much lower pressures (12 GPa) for the onset of partial amorphization.

36 MATERIALS SCIENCE↗

Cross-scale efficient tensor contractions for coupled cluster computations through multiple programming model backends

Coupled-cluster methods provide highly accurate models of molecular structure through explicit numerical calculation of tensors representing the correlation between electrons. These calculations are dominated by a sequence of tensor contractions, motivating the development of numerical libraries for such operations. While based on matrix–matrix multiplication, these libraries are specialized to exploit symmetries in the molecular structure and in electronic interactions, and thus reduce the size of the tensor representation and the complexity of contractions. The resulting algorithms are irregular and their parallelization has been previously achieved via the use of dynamic scheduling or specialized data decompositions. We introduce our efforts to extend the Libtensor framework to work in the distributed memory environment in a scalable and energy-efficient manner. We achieve up to 240× speedup compared with the optimized shared memory implementation of Libtensor. We attain scalability to hundreds of thousands of compute cores on three distributed-memory architectures (Cray XC30 and XC40, and IBM Blue Gene/Q), and on a heterogeneous GPU-CPU system (Cray XK7). As the bottlenecks shift from being compute-bound DGEMM's to communication-bound collectives as the size of the molecular system scales, we adopt two radically different parallelization approaches for handling load-imbalance, tasking and bulk synchronous models. Nevertheless, we preserve a unified interface to both programming models to maintain the productivity of computational quantum chemists.

97 MATHEMATICS AND COMPUTING↗

Multiple nonlinear dielectric resonance of ultra-long silver trimolybdate nanowires

The silver molybdate nanowires (NWs) have been synthesized and characterized. The multiple dielectric resonant peaks of the nanocomposites filled with silver molybdate nanowires have been studied from 2 to 18 GHz. The as-established equivalent circuit model of the silver molybdate nanowires were employed to explain the nonlinear dielectric resonant behavior. - Graphical abstract: The ultra-long silver trimolybdate nanowires were synthesized and the dielectric peoperties of the products were studied from 2 to 18 GHz. The as-established equivalent circuit model of the silver molybdate nanowires were employed to explain the nonlinear dielectric resonant behavior. Highlights: • The silver molybdate nanowires have been synthesized and characterized. • The dielectric properties of the silver molybdate/ paraffin nanocomposites have been studied. • Higher concentration of silver trimolybdate enhances the dielectric properties of composite. • The dielectric behaviors were explained based on the as-established equivalent circuit mode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of multiple repairs in girth welds of pipelines on the mechanical properties

This work presents the results of multiple weld repairs in the same area in seamless API X-52 microalloyed steel pipe. Four conditions of shielded metal arc welding repairs and one as-welded specimen of the girth weld were characterized to determine changes in the microstructure, grain size in the heat affected zone, and to evaluate their effect on the mechanical properties of the weld joints. The mechanical properties by means of tension tests, Charpy-V impact resistance and Vickers hardness of the welds were analyzed. The results indicate that significant changes are not generated in the microstructural constituents of the heat affected zone. Grain growth in the heat affected zone at the specimen mid-thickness with the number of repairs was observed. Tensile strength of the weld joints meets the requirement of the API 1104 standard even after the fourth weld repair. Significant reduction in Charpy-V impact resistance with the number of weld repairs was found when the notch location was in the intersection of the fusion line with the specimen mid-thickness. A significant increase in the Vickers hardness of the heat affected zone occurred after the first repair and a gradual decrease in the Vickers hardness occurred as the number of repairs increases.

36 MATERIALS SCIENCE↗

Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds

This work investigates the effects of molybdenum nanoparticles on the growth of interfacial intermetallic compound between Sn-3.8Ag-0.7Cu solder and copper substrate during multiple reflow. Molybdenum nanoparticles were mixed with Sn-3.8Ag-0.7Cu solder paste by manual mixing. Solder samples were reflowed on a copper substrate in a 250 Degree-Sign C reflow oven up to six times. The molybdenum content of the bulk solder was determined by inductive coupled plasma-optical emission spectrometry. It is found that upon the addition of molybdenum nanoparticles to Sn-3.8Ag-0.7Cu solder, the interfacial intermetallic compound thickness and scallop diameter decreases under all reflow conditions. Molybdenum nanoparticles do not appear to dissolve or react with the solder. They tend to adsorb preferentially at the interface between solder and the intermetallic compound scallops. It is suggested that molybdenum nanoparticles impart their influence on the interfacial intermetallic compound as discrete particles. The intact, discrete nanoparticles, by absorbing preferentially at the interface, hinder the diffusion flux of the substrate and thereby suppress the intermetallic compound growth. - Highlights: Black-Right-Pointing-Pointer Mo nanoparticles do not dissolve or react with the SAC solder during reflow. Black-Right-Pointing-Pointer Addition of Mo nanoparticles results smaller IMC thickness and scallop diameter. Black-Right-Pointing-Pointer Mo nanoparticles influence the interfacial IMC through discrete particle effect.

36 MATERIALS SCIENCE↗

Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurements

Recent advances in spherical indentation stress-strain protocols and analyses have demonstrated the capability for measuring reliably the local mechanical responses in polycrystalline metal samples at different length scales, ranging from sub-micron (regions within individual grains) to several hundreds of microns (regions covering several grains). These recent advances have now made it possible to study systematically the mechanical behavior of a single material system at different length scales, with tremendous potential to obtain new insights into the role of individual phases, interfaces, and other microscale constituents on the macroscale mechanical response of the material. In this paper, we report spherical indentation stress-strain measurements with different indenter sizes (microns to millimeters) on Ti-6Al-4V (Ti-64) which capture the mechanical response of single phase alpha-Ti-64, single colony (alpha-beta), few colonies, and many colonies of Ti-64. The results show that the average mechanical response (indentation modulus and yield strength) from multiple indentations remains relatively unchanged from single phase alpha to many colonies of Ti-64, while the variance in the response decreases with indenter size. In conclusion, the work-hardening response in indentation tests follows a similar behavior up to indentation zones of many colonies, which shows significantly higher work hardening rates.

36 MATERIALS SCIENCE↗

InAs{sub 0.45}P{sub 0.55}/InP strained multiple quantum wells intermixed by inductively coupled plasma etching

The intermixing effect on InAs{sub 0.45}P{sub 0.55}/InP strained multiple quantum wells (SMQWs) by inductively coupled plasma (ICP) etching and rapid thermal annealing (RTA) is investigated. Experiments show that the process of ICP etching followed RTA induces the blue shift of low temperature photoluminescence (PL) peaks of QWs. With increasing etching depth, the PL intensities are firstly enhanced and then diminished. This phenomenon is attributed to the variation of surface roughness and microstructure transformation inside the QW structure during ICP processing.

36 MATERIALS SCIENCE↗