Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “modularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Solar concentrator advanced development project

A solar dynamic concentrator design developed for use with a solar-thermodynamic power generation module intended for the Space Station is considered. The truss hexagonal panel reflector uses a modular design approach and is flexible in attainable flux profiles and assembly techniques. Preliminary structural, thermal, and optical analysis results are discussed. Accuracy of the surface reflectors should be within 5 mrad rms slope error, resulting in the need for close fabrication tolerances. Significant fabrication issues to be addressed include the facet reflective and protective coating processes and the surface specularity requirements.

Corrigan, Robert D.↗

A study of Schwarz converters for nuclear powered spacecraft

High power space systems which use low dc voltage, high current sources such as thermoelectric generators, will most likely require high voltage conversion for transmission purposes. This study considers the use of the Schwarz resonant converter for use as the basic building block to accomplish this low-to-high voltage conversion for either a dc or an ac spacecraft bus. The Schwarz converter has the important assets of both inherent fault tolerance and resonant operation; parallel operation in modular form is possible. A regulated dc spacecraft bus requires only a single stage converter while a constant frequency ac bus requires a cascaded Schwarz converter configuration. If the power system requires constant output power from the dc generator, then a second converter is required to route unneeded power to a ballast load.

Stuart, Thomas A.↗

An imaging spectrometer for the investigation of Mars

Unmanned misions to Mars will employ imaging spectrometry to yield compositional data about the target body, through visual and IR measurements of the intensity and distribution of characteristic spectral signature features in the radiation that is emitted and reflected by surface materials. Attention is presently given to a modular imaging spectrometer design with applicability to a diverse range of planetary missions. This visual and IR mapping spectrometer has been tentatively selected for NASA's recently approved Mars Observer mission. Detailed optical characteristics and capabilities of the instrument are presented.

Duval, James E.↗

Spacecraft technology trends - A view from the past

Future spacecraft will be sent on missions to complete the exploration of the solar system, to return samples from celestial bodies, record the process of creation of stars, galaxies, and the universe itself, to provide a continuous record of earth processes, and to maintain vital space communications. A key ingredient to projecting the future is to comprehend the historic record and to understand the significance of trends. This paper focuses on spacecraft cost and life trends, as well as those of the major subsystems. Throughout the history of the 'space age' there has been significant progress in the performance of spacecraft and their subsystems. However, various aspects of spacecraft performance lag behind what is technically feasible by a considerable margin. In addition, examination of the historical trend implies that future spacecraft will likely continue to be relatively unique in their design features. This is in contrast to the technically realizable future attributes such as large space platforms, modularity, system autonomy and on-orbit repair and servicing.

Hudson, Wayne R.↗

The Flight Telerobotic Servicer (FTS) - A focus for automation and robotics on the Space Station

The concept, fundamental design principles, and capabilities of the FTS, a multipurpose telerobotic system for use on the Space Station and Space Shuttle, are discussed. The FTS is intended to assist the crew in the performance of extravehicular tasks; the telerobot will also be used on the Orbital Maneuvering Vehicle to service free-flyer spacecraft. The FTS will be capable of both teleoperation and autonomous operation; eventually it may also utilize ground control. By careful selection of the functional architecture and a modular approach to the hardware and software design, the FTS can accept developments in artificial intelligence and newer, more advanced sensors, such as machine vision and collision avoidance.

Hinkal, Sanford W.↗

A proposed Applications Information System - Concept, implementation, and growth

This paper describes a newly developed concept within NASA for an Applications Information System (AIS). The AIS would provide the opportunity to the public and private sectors of shared participation in a remote sensing research program directed to a particular set of land-use or environmental problems. Towards this end, the AIS would offer the technological framework and information system resources to overcome many of the deficiencies that end-users have faced over the years such as limited access to data, delay in data delivery, and a limited access to data reduction algorithms and models to convert data to geophysical measurements. In addition, the AIS will take advantage of NASA developments in networking among information systems and use of state of the art technology, such as CD Roms and optical disks for the purpose of increasing the scientific benefits of applied environmental research. The rationale for the establishment of an AIS, a methodology for a step-wise, modular implementation, and the relationship of the AIS to other NASA information systems are discussed.

Mcconnell, Dudley G.↗

Past, present, and future activities in space power technology in the United States of America

Space power technology research in the U.S. is examined. The objectives for advanced power systems are long life, safety, flexibility, modularity, growth capability, and autonomy. Research in the areas of photovoltaic arrays, electrical energy storage, and the development of solar dynamic power systems and radio thermal generators is described. The applications of advances in power generation, energy storage, and power management and distribution to the Space Station are discussed.

Ambrus, Judith H.↗

Multiple experiment processing furnace (MEPF) - An overview

A preliminary design has been developed for the MEPF capable of flying initially as a payload on the NASA/MSFC Materials Science Laboratory carrier in the Shuttle cargo bay and later on the Space Station as a rack-mounted payload in the pressurized volume of the U.S. Laboratory Module. The key requirements and the design approach are examined. It is noted that the MEPF modular design approach ensures maintainability and offers a reuse capability for up to 12 flights (with refurbishments and parts replacement between missions, if required). The design incorporates safety features, and adequate redundancy is built in to improve reliability of operations.

Srinivas, R.↗

The opportunities for space biology research on the Space Station

The life sciences research facilities for the Space Station are being designed to accommodate both animal and plant specimens for long durations studies. This will enable research on how living systems adapt to microgravity, how gravity has shaped and affected life on earth, and further the understanding of basic biological phenomena. This would include multigeneration experiments on the effects of microgravity on the reproduction, development, growth, physiology, behavior, and aging of organisms. To achieve these research goals, a modular habitat system and on-board variable gravity centrifuges, capable of holding various animal, plant, cells and tissues, is proposed for the science laboratory.

Ballard, Rodney W.↗

A space-marching method for the computation of viscous internal flows

A space-marching method has been developed to compute 3-D viscous flows in internal geometries. The Navier-Stokes equations have been posed as an initial-value problem by neglecting the effects of streamwise diffusion and treating the streamwise pressure gradient as a known source term. The fully coupled system of equations has been solved by a noniterative algorithm at each streamwise step of the computation. A low Mach number formulation of the equations has been used to compute incompressible flow fields. A computer program has been written to implement all aspects of the space-marching algorithm. The program is modular and is easily adapted to the widely varying geometries of internal flows. The space-marching algorithm has been tested by computing simple flows with known analytical solutions. The method has been used to predict complex 3-D turbulent flows. The algorithm is stable and very economical. A single sweep of the flow field by the space-marching method is approximately equivalent to one time-step of the time-marching method.

Govindan, T. R.↗

Design of an ammonia two-phase Prototype Thermal Bus for Space Station

The feasibility of two-phase heat transport systems for use on Space Station was demonstrated by testing the Thermal Bus Technology Demonstrator (TBTD) as part of the Integrated Two-Phase System Test in NASA-JSC's Thermal Test Bed. Under contract to NASA-JSC, Grumman is currently developing the successor to the TBTD, the Prototype Thermal Bus System (TBS). The TBS design, which uses ammonia as the working fluid, is intended to achieve a higher fidelity level than the TBTD by incorporating both improvements based on TBTD testing and realistic design margins, and by addressing Space Station issues such as redundancy and maintenance. The TBS is currently being fabricated, with testing scheduled for late 1987/early 1988. This paper describes the TBS design which features fully redundant plumbing loops, five evaporators designed to represent different heat acquisition interfaces, 14 condensers which mate with either space radiators or facility heat exchangers, and several modular components.

Brown, Richard F.↗

The Mariner Mark II program

The Mariner Mark II spacecraft is a modular design that can be inexpensively reconfigured for different missions beyond the inner solar system. The first three missions will be described. The Comet Rendezvous Asteroid Flyby mission has a February 1993 launch to comet Tempel 2. The Cassini mission has a May 1995 launch to Saturn and Titan. The third mission is a Comet Nucleus Sample Return launch in 1998.

Draper, Ronald F.↗

The GSFC Flight Support System for on-orbit satellite servicing

To plan and execute a successful on-orbit satellite servicing mission, space support hardware, a serviceable spacecraft design, and flexible ground operations are required. This paper addresses space support hardware and in particular the Goddard Space Flight Center (GSFC) Satellite Servicing Project's (SSP) Flight Support System (FSS). The FSS is designed to be compatible with the Space Transportation System Orbiter and to support on-orbit servicing of Multimission Modular Spacecraft. It provides mechanical, electrical, and thermal support to the spacecraft during the servicing mission. Standardization of spacecraft design, components, and interfaces is required to make a satellite serviceable. Spacecraft ground operation capabilities must accommodate servicing mission requirements. Space support tools and equipment, such as the Power Ratchet Tool, assists the astronaut during time critical EVA operations to more efficiently perform the servicing mission.

Griffin, Thomas J.↗

Space erectable radiator system development

The NASA Space Station's Space Erectable Radiator System features modular radiator panels with high-capacity tapered artery heat pipes bonded within their aluminum honeycomb structures. Simple, dry aluminum-to-aluminum thermal contact surfaces are used for the connections, thereby requiring no fluid joints; a uniformly distributed clamping force at the radiator panel-to-thermal transport loop interface heat exchange surface yields high thermal contact conductance as well as minimum area and weight for the requisite performance. The design has been optimized for weight and cost.

Oren, J. A.↗

Experimental test of liquid droplet radiator performance

The liquid droplet radiator (LDR) is a heat rejection system for space power systems wherein an array of heated liquid droplets radiates energy directly to space. The use of submillimeter droplets provides large radiating area-to-mass ratio, resulting in radiator systems which are several times lighter than conventional solid surface radiators. An experiment is described in which the power radiated by an array of 2300 streams of silicone oil droplets is measured to test a previously developed theory of the LDR radiation process. This system would be capable of rejecting several kW of heat in space. Furthermore, it would be suitable as a modular unit of an LDR designed for 100-kW power levels. The experiment provided confirmation of the theoretical dependence of droplet array emissivity on optical depth. It also demonstrated the ability to create an array of more than 1000 droplet streams having a divergence less than 1 degree.

Mattick, A. T.↗

Expert systems for space power supply - Design, analysis, and evaluation

The feasibility of applying expert systems to the conceptual design, analysis, and evaluation of space power supplies in particular, and complex systems in general is evaluated. To do this, the space power supply design process and its associated knowledge base were analyzed and characterized in a form suitable for computer emulation of a human expert. The existing expert system tools and the results achieved with them were evaluated to assess their applicability to power system design. Some new concepts for combining program architectures (modular expert systems and algorithms) with information about the domain were applied to create a 'deep' system for handling the complex design problem. NOVICE, a code to solve a simplified version of a scoping study of a wide variety of power supply types for a broad range of missions, has been developed, programmed, and tested as a concrete feasibility demonstration.

Cooper, Ralph S.↗

Need, utilization, and configuration of a large, multi-G centrifuge on the Space Station

A large, multi-g centrifuge is required on the Space Station (1) to provide valid 1-g controls for the study of zero-g effects on animals and plants and to study readaptation to 1 g; (2) to store animals at 1 g prior to short-term zero-g experimentation; (3) to permit g-level threshold studies of gravity effects. These requirements can be met by a 13-ft-diam., center-mounted centrifuge, on which up to 48 modular habitats with animals (squirrel monkey, rat, mouse) and plants are attached. The advantages of locating this centrifuge with the vivarium, a common environmental control and life support system, a general-purpose work station and storage of food, water, and supplies in an attached short module, are elaborated. Servicing and operation of the centrifuge, as well as minimizing its impact on other Space Station functions are also considered.

Bonting, Sjoerd L.↗

Development of wing and tail configurations for low altitude unmanned research aircraft (LAURA)

The Low Altitude/Airspeed Unmanned Research Aircraft (LAURA) is being developed by the U.S. Navy for flight test research using low-Reynolds number airfoils. This vehicle consists of a standard modular fuselage designed to accept the installation of several wings/tails having low Reynolds number airfoils, and various planform shapes. Design constraints include shipboard storage, long flight endurance at very low airspeeds and sea-skimming cruise altitude. The stringent design constraints require the development of high-performance low Reynolds number (LRN) airfoils, suitable lifting surface configuration, and advanced airframe-propulsion systems. The present paper describes ongoing efforts to develop wing and tail configurations for LAURA using airfoils designed at NASA Langley Research Center.

Mangalam, S. M.↗