Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Study of J / ψ Production in Jets

The production of $J/ψ$ mesons in jets is studied in the forward region of proton-proton collisions using data collected with the LHCb detector at a center-of-mass energy of 13 TeV. The fraction of the jet transverse momentum carried by the $J/ψ$ meson, $z$($J/ψ$)≡$p$ T ($J/ψ$)/$p$ T (jet), is measured using jets with $p$ T (jet) > 20 GeV in the pseudorapidity range 2.5 < $η$(jet) < 4.0. The observed $z$($J/ψ$) distribution for $J/ψ$ mesons produced in b-hadron decays is consistent with expectations. However, the results for prompt $J/ψ$ production do not agree with predictions based on fixed-order nonrelativistic QCD. This is the first measurement of the $p$ T fraction carried by prompt $J/ψ$ mesons in jets at any experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of Medium-Induced Yield Enhancement and Acoplanarity Broadening of Low-𝑝T Jets from Measurements in 𝑝⁢𝑝 and Central Pb-Pb Collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high transverse momentum (high p T ) hadron trigger in proton-proton and central Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV. A data-driven statistical method is used to mitigate the large uncorrelated background in central Pb-Pb collisions. Recoil jet distributions are reported for jet resolution parameter R = 0.2, 0.4, and 0.5 in the range 7 < p T.jet < 140 GeV=c and trigger-recoil jet azimuthal separation π/2 < Δφ < π. The measurements exhibit a marked medium-induced jet yield enhancement at low p T and at large azimuthal deviation from Δφ ~ π. The enhancement is characterized by its dependence on Δφ, which has a slope that differs from zero by 4.7σ. Comparisons to model calculations incorporating different formulations of jet quenching are reported. These comparisons indicate that the observed yield enhancement arises from the response of the QGP medium to jet propagation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biorefinery for combined production of jet fuel and ethanol from lipid‐producing sugarcane: a techno‐economic evaluation

Abstract Replacing fossil fuels with an economically viable green alternative at scale has proved most challenging in the aviation sector. Recently sugarcane, the most productive crop on the planet, has been engineered to accumulate lipids. This opens the way for production of far more industrial vegetable oil per acre than previously possible. This study performs techno‐economic feasibility analysis of jet fuel production from this new cost efficient and high yield feedstock. A comprehensive process model for biorefinery producing hydrotreated jet fuel (from lipids) and ethanol (from sugars), with 1 600 000 MT yr −1 lipid‐cane processing capacity, was developed in SuperPro Designer. Considering lipid‐cane development is continuing for higher oil concentrations, analysis was performed with lipid‐cane containing 5%, 10%, 15%, and 20% lipids. Capital investments for the biorefinery ranged from 238.1 to 351.2 million USD , with jet fuel capacities of 12.6–50.5 million liters (correspondingly ethanol production of nil to 102.6 million liters). The production cost of jet fuel for different scenarios was estimated $0.73 to $1.79 per liter ($2.74 to $6.76 per gal) of jet fuel. In all cases, the cost of raw materials accounted for more than 70% of total operational cost. Biorefinery was observed self‐sustainable for steam and electricity requirement, because of in‐house steam and electricity generation from burning of bagasse. Minimum fuel selling prices with a 10% discount rate for 20% lipid case was estimated $1.40/L ($5.31/gal), which was lower than most of the reported prices of renewable jet fuel produced from other oil crops and algae. Along with lower production costs, lipid‐cane could produce as high as 16 times the jet fuel (6307 L ha −1 ) per unit land than that of other oil crops and do so using low‐value land unsuited to most other crops, while being highly water and nitrogen use efficient.

09 BIOMASS FUELS↗

Sweeping Jet Film Cooling on a Turbine Vane

The cooling performance of sweeping jet film cooling was studied on a turbine vane suction surface in a low-speed linear cascade wind tunnel. The sweeping jet holes consist of fluidic oscillators with an aspect ratio (AR) of unity and a hole spacing of Pd/D = 6. Infrared (IR) thermography was used to estimate the adiabatic film effectiveness at several blowing ratios and two different freestream turbulence levels (Tu = 0.3% and 6.1%). Convective heat transfer coefficient was measured by a transient IR technique, and the net heat flux benefit was calculated. The total pressure loss due to sweeping jet film cooling was characterized by traversing a total pressure probe at the exit plane of the cascade. Tests were performed with a baseline shaped hole (SH) (777-shaped hole) for comparison. The sweeping jet hole showed higher adiabatic film effectiveness than the 777-shaped hole in the near hole region. Although the unsteady sweeping action of the jet augments heat transfer, the net positive cooling benefit is higher for sweeping jet holes compared to 777 hole at particular flow conditions. The total pressure loss measurement showed a 12% increase in total pressure loss at a blowing ratio of M = 1.5 for sweeping jet hole, while 777-shaped hole showed a 8% total pressure loss increase at the corresponding blowing ratio.

Engineering↗

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at sqrt(s) = 7 TeV

Characteristics of multi-particle production in proton-proton collisions at sqrt(s) = 7 TeV are studied as a function of the charged-particle multiplicity, N[ch]. The produced particles are separated into two classes: those belonging to jets and those belonging to the underlying event. Charged particles are measured with pseudorapidity abs(eta) < 2.4 and transverse momentum pt > 0.25 GeV. Jets are reconstructed from charged-particles only and required to have pt > 5 GeV. The distributions of jet pt, average pt of charged particles belonging to the underlying event or to jets, jet rates, and jet shapes are presented as functions of N[ch] and compared to the predictions of the PYTHIA and HERWIG event generators. Predictions without multi-parton interactions fail completely to describe the N[ch]-dependence observed in the data. For increasing N[ch], PYTHIA systematically predicts higher jet rates and harder pt spectra than seen in the data, whereas HERWIG shows the opposite trends. At the highest multiplicity, the data-model agreement is worse for most observables, indicating the need for further tuning and/or new model ingredients.

HEP↗

Measurement of jet multiplicity distributions in t t-bar production in pp collisions at sqrt(s) = 7 TeV

The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7 TeV at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton + jets decay channels using data corresponding to an integrated luminosity of 5.0 inverse femtobarns. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the t t-bar production is determined as a function of the additional jet multiplicity in the lepton + jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $c$-jet mistagging efficiency in $t\bar{t}$ events using $pp$ collision data at $\sqrt{s}=13$ $\text {TeV}$ collected with the ATLAS detector

A technique is presented to measure the efficiency with which c-jets are mistagged as b-jets (mistagging efficiency) using tt¯ events, where one of the W bosons decays into an electron or muon and a neutrino and the other decays into a quark–antiquark pair. The measurement utilises the relatively large and known W → cs branching ratio, which allows a measurement to be made in an inclusive c-jet sample. The data sample used was collected by the ATLAS detector at √s = 13 TeV and corresponds to an integrated luminosity of 139 fb –1 . Events are reconstructed using a kinematic likelihood technique which selects the mapping between jets and tt¯ decay products that yields the highest likelihood value. The distribution of the b-tagging discriminant for jets from the hadronic W decays in data is compared with that in simulation to extract the mistagging efficiency as a function of jet transverse momentum. The total uncertainties are in the range 3–17%. The measurements generally agree with those in simulation but there are some differences in the region corresponding to the most stringent b-jet tagging requirement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the differential $\hbox {t}\overline{\hbox {t}}$ production cross section as a function of the jet mass and extraction of the top quark mass in hadronic decays of boosted top quarks

A measurement of the jet mass distribution in hadronic decays of Lorentz-boosted top quarks is presented. The measurement is performed in the lepton + jets channel of top quark pair production ($\hbox {t}\overline{\hbox {t}}$) events, where the lepton is an electron or muon. The products of the hadronic top quark decay are reconstructed using a single large-radius jet with transverse momentum greater than 400 GeV. The data were collected with the CMS detector at the LHC in proton-proton collisions and correspond to an integrated luminosity of 138 fb -1 . The differential $\hbox {t}\overline{\hbox {t}}$ production cross section as a function of the jet mass is unfolded to the particle level and is used to extract the top quark mass. The jet mass scale is calibrated using the hadronic W boson decay within the large-radius jet. The uncertainties in the modelling of the final state radiation are reduced by studying angular correlations in the jet substructure. These developments lead to a significant increase in precision, and a top quark mass of 173.06 ± 0.84 GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deep learning assisted jet tomography for the study of Mach cones in QGP

Abstract Mach cones are expected to form in the expanding quark-gluon plasma (QGP) when energetic quarks and gluons traverse the hot medium at a velocity faster than the speed of sound in high-energy heavy-ion collisions. The shape of the Mach cone and the associated diffusion wake are sensitive to the initial jet production location and the propagation direction of the parton shower relative to the radial flow because of the distortion caused by the collective expansion of the QGP and the large density gradient. The shape of jet-induced Mach cones and their distortions in heavy-ion collisions provide a unique and direct probe of the dynamical evolution and the equation of state of QGP. However, it is difficult to identify the Mach cone and the diffusion wake in current experimental measurements of final hadron distributions because they are averaged over all possible initial jet production locations and parton-shower propagation directions. To overcome this difficulty, we develop a deep learning assisted jet tomography which uses the full information of the final hadrons from jets to localize the initial jet production positions. This method can help to constrain the initial regions of jet production in heavy-ion collisions and enable a differential study of Mach-cones with different path lengths and orientations relative to the radial flow of the QGP in heavy-ion collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emergence of a nocturnal low-level jet from a broad baroclinic zone

An analytical model is presented for the generation of a Blackadar-like nocturnal low-level jet in a broad baroclinic zone. The flow is forced from below (flat ground) by a surface buoyancy gradient and from above (free atmosphere) by a constant pressure gradient force. Diurnally-varying mixing coefficients are specified to increase abruptly at sunrise and decrease abruptly at sunset. With attention restricted to a surface buoyancy that varies linearly with a horizontal coordinate, the Boussinesq-approximated equations of motion, thermal energy, and mass conservation reduce to a system of one-dimensional equations that can be solved analytically. Sensitivity tests with southerly jets suggest that (i) stronger jets are associated with larger decreases of the eddy viscosity at sunset (as in Blackadar theory), (ii) the nighttime surface buoyancy gradient has little impact on jet strength, and (iii) for pure baroclinic forcing (no free-atmosphere geostrophic wind), the nighttime eddy diffusivity has little impact on jet strength, but the daytime eddy diffusivity is very important and has a larger impact than the daytime eddy viscosity. The model was applied to a jet that developed in fair weather conditions over the Great Plains from southern Texas to northern South Dakota on 1 May 2020. The ECMWF Reanalysis v5 (ERA5) for the afternoon prior to jet formation showed that a broad north-south-oriented baroclinic zone covered much of the region. The peak model-predicted winds were in good agreement with ERA5 winds and lidar data from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in north-central Oklahoma.

54 ENVIRONMENTAL SCIENCES↗

Study of jets produced in association with a W boson in p p collisions at s = 7 TeV with the ATLAS detector

CERN-LHC. Measurements of cross sections for final states containing a W boson and hadronic jets in proton-proton collisions at a centre-of-mass energy of 7 TeV. The data is from the full 2010 sample with a total integrated luminosity of 36 pb^{-1}. Cross sections are measured in both the electron and muon decay modes of the W and are presented as a function of inclusive jet multiplicity up to five jets. For each multiplicity, cross sections are determined as a function of (1) each jet PT, (2) the scalar sum (HT) of the PT of the charged lepton, missing PT and all jets, (3) the invariant mass of the jets and (4) rapidity distributions of various combinations of leptons and jets. The results are corrected for all detector effects and all known backgrounds. Comparative results are also shown for particle-level predicitions from ALPGEN, SHERPA and BLACKHAT-SHERPA. A separate link gives the Non-Perturbative and QED correction for each table.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Properties of jets measured from tracks in proton-proton collisions at center-of-mass energy s = 7 TeV with the ATLAS detector

CERN-LHC. Measurement of the properties of charged particle jets produced in proton-proton collisions at a centre-of-mass energy of 7 TeV using a minimum-bias trigger. The data were taken during 2010 and have an integrated luminosity of 779 mub^{-1}. Jets are reconstructed using the anti-kT algorithm with radius parameters 0.4 and 0.6 applied to charged particles with PT > 300 MeV. The measured track-based jets are corrected back to truth-level charged particle jets, which are defined to be the jets obtained when the same algoerithm is applied to all primary charged particles with the same PT cut. Measurements of the PT cross sections, multiplicities per jet, fragmentation Z distributions, transverse momentum and charged particle radial densities relative to the jet axes are presented in slices of rapidity and transverse momentum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of isolated-photon plus jet production in pp collisions at s = 7 TeV with the ATLAS detector

CERN-LHC. The dynamics of isolated-photon plus jet production in pp collisions at a centre-of-mass energy of 7 TeV has been studied with the ATLAS detector at the LHC using an integrated luminosity of 37 pb-1. Measurements of isolated-photon plus jet bin-averaged cross sections are presented as functions of photon transverse energy, jet transverse momentum and jet rapidity. In addition, the bin-averaged cross sections as functions of the difference between the azimuthal angles of the photon and the jet, the photon--jet invariant mass and the scattering angle in the photon--jet centre-of-mass frame have been measured. Next-to-leading-order QCD calculations are compared to the measurements and provide a good description of the data, except for the case of the azimuthal opening angle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of jet charge in dijet events from sqrt(s)=8 TeV pp collisions with the ATLAS detector

CERN-LHC. Measurements of the jet charge in dijet events in proton-proton collisions at a centre-of-mass energy of 8 TeV with 20.3 fb^-1 of data collected in 2012. The jet charge is a momentum-weighted sum of charges of tracks associated to the jet. The momentum is regulated by an exponent kappa. Measurements are reported for the average and standard deviation of the jet charge distribution as a function of the magnitude of the jet transverse momentum for kappa = 0.3, 0.5, 0.7 and separately for the more forward and more central jets (in pseudo-rapidity). The event selection is minimal, with only a requirement that the magnitude of the transverse momenta of the two leading jets be above 50 GeV and that these momenta be within 50% of each other.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Understanding and predicting soot generation in turbulent non-premixed jet flames.

This report documents the results of a project funded by DoD's Strategic Environmental Research and Development Program (SERDP) on the science behind development of predictive models for soot emission from gas turbine engines. Measurements of soot formation were performed in laminar flat premixed flames and turbulent non-premixed jet flames at 1 atm pressure and in turbulent liquid spray flames under representative conditions for takeoff in a gas turbine engine. The laminar flames and open jet flames used both ethylene and a prevaporized JP-8 surrogate fuel composed of n-dodecane and m-xylene. The pressurized turbulent jet flame measurements used the JP-8 surrogate fuel and compared its combustion and sooting characteristics to a world-average JP-8 fuel sample. The pressurized jet flame measurements demonstrated that the surrogate was representative of JP-8, with a somewhat higher tendency to soot formation. The premixed flame measurements revealed that flame temperature has a strong impact on the rate of soot nucleation and particle coagulation, but little sensitivity in the overall trends was found with different fuels. An extensive array of non-intrusive optical and laser-based measurements was performed in turbulent non-premixed jet flames established on specially designed piloted burners. Soot concentration data was collected throughout the flames, together with instantaneous images showing the relationship between soot and the OH radical and soot and PAH. A detailed chemical kinetic mechanism for ethylene combustion, including fuel-rich chemistry and benzene formation steps, was compiled, validated, and reduced. The reduced ethylene mechanism was incorporated into a high-fidelity LES code, together with a moment-based soot model and models for thermal radiation, to evaluate the ability of the chemistry and soot models to predict soot formation in the jet diffusion flame. The LES results highlight the importance of including an optically-thick radiation model to accurately predict gas temperatures and thus soot formation rates. When including such a radiation model, the LES model predicts mean soot concentrations within 30% in the ethylene jet flame.

33 ADVANCED PROPULSION SYSTEMS↗

Measurement of Hadronic Event Shapes and Jet Substructure in Proton-Proton Collisions at 7.0 TeV Center-of-Mass Energy with the ATLAS Detector at the Large Hadron Collider

This thesis presents the first measurement of 6 hadronic event shapes in proton-proton collisions at a center-of-mass energy of $\sqrt{s}$ = 7 TeV using the ATLAS detector at the Large Hadron Collider. Results are presented at the particle-level, permitting comparisons to multiple Monte Carlo event generator tools. Numerous tools and techniques that enable detailed analysis of the hadronic final state at high luminosity are described. The approaches presented utilize the dual strengths of the ATLAS calorimeter and tracking systems to provide high resolution and robust measurements of the hadronic jets that constitute both a background and a signal throughout ATLAS physics analyses. The study of the hadronic final state is then extended to jet substructure, where the energy flow and topology within individual jets is studied at the detector level and techniques for estimating systematic uncertainties for such measurements are commissioned in the first data. These first substructure measurements in ATLAS include the jet mass and sub-jet multiplicity as well as those concerned with multi-body hadronic decays and color flow within jets. Finally, the first boosted hadronic object observed at the LHC - the decay of the top quark to a single jet - is presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the $W+$ jets differential cross-sections in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV using the CDF II Detector

In this thesis the measurements of differential cross sections for the production of the $W$-boson in association with jets in $p\bar{p}$ collisions at $\sqrt{s} = 1.96$ TeV are presented. The measurements are based on 9.0 fb$^{-1}$ of CDF Run II data (i.e., the full dataset). Only events in which the W-boson decays leptonically (i.e., W → ev and W → μv)and at least one jet is present are considered. The lepton candidates are required to have a transverse energy $E^{\ell}_T > 25$GeV and pseudorapidity in the range |n ℓ | < 1 whereas, the jets are reconstructed using the JETCLU algorithm with a radius of 0.4 requiring transverse energy $E^{jet}_T > 25$GeV and pseudorapidity in the range |η jet| < 2. The reconstructed W-boson transverse mass should be greater than 40GeV/c 2 . The differential cross sections as a function of the jet multiplicity ($N$ > or = to 1, 2, 3, 4) and the leading jet transverse energy, are measured separately for each decay channel and then combined. For a meaningful comparison with theory the measured cross-sections are unfolded to remove detector effects. The resulting particle-level cross-sections are compared to theoretical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Manual for the Jet Event and Background Simulation Library(JEBSimLib)

Jets are the collimated streams of particles resulting from hard scattering in the initial state of high-energy collisions. In heavy-ion collisions, jets interact with the quark-gluon plasma (QGP) before freezeout, providing a probe into the internal structure and properties of the QGP. In order to study jets, background must be subtracted from the measured event, potentially introducing a bias. We aim to understand and quantify this subtraction bias. PYTHIA, a library to simulate pure jet events, is used to simulate a model for a signature with one pure jet (a photon) and one quenched jet, where all quenched particle momenta are reduced by a user-de ned constant fraction. Background for the event is simulated using multiplicity values generated by the TRENTO initial state model of heavy-ion collisions fed into a thermal model consisting of a 3-dimensional Boltzmann distribution for particle types and momenta. Data from the simulated events is used to train a statistical model, which computes a posterior distribution of the quench factor for a data set. The model was tested rst on pure jet events and then on full events including the background. This model will allow for a quantitative determination of biases induced by various methods of background subtraction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗