Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “forcing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Shale-fluid interactions during forced lmbibition and flow-back

One way to minimize the need for disposal of flow-back waters produced during the hydraulic fracturing of unconventional reservoirs is, potentially, to recycle these fluids by recovering and re-injecting them during hydraulic fracturing of nearby new wells. These flow-back waters contain, however, large concentrations of dissolved salts. During hydraulic fracturing of unconventional reservoirs, a well may undergo extended shut-in periods, following the initial hydraulic-fracture stimulation. The concern here, therefore, is that the salts dissolved in the re-injected flow-back waters may precipitate in the subsurface, thus promoting scale formation; or alternately, because of their high salinity, these same fluids may cause the dissolution of various minerals present in the subsurface. Large divalent cations (e.g., Ca²⁺, Ba²⁺ and Sr²⁺) and anions (e.g., CO3²⁻ and SO4²) may chemically interact with and cause the swelling of clay fractions, thus blocking pores in certain pore size ranges. All these phenomena (i.e., scale formation, clay swelling, minerals dissolution) can influence the petrophysical properties of the formation, including its permeability, porosity, contact angle, etc. One way to potentially overcome some of these technical challenges, is to pre-treat these flow-back waters, prior to re-injection (e.g., via chemical precipitation, followed by membrane filtration) in order to remove unwanted salts. However, such pre-treatment is costly, and the degree of salt removal needed to prevent formation damage is important in determining the economic viability of flow-back water recycle via re-injection. A key focus of this work, therefore, is to study the impact that the injection of flow-back waters, that have undergone varying degrees of pre-treatment and clean-up, will have on the flow-through characteristics of a tight-gas reservoir, particularly of the Marcellus Shale formation. To do so, we have carried-out forced-imbibition experiments with shale samples from various depths in the Marcellus formation, whose properties span high to low ranges of TOC, clay content and matrix permeabilities. We have studied the forced-imbibition characteristics, at an injection pressure of 24,233 kPa (3500 psig), of various flow-back fluids into shale cores saturated with methane at a pore pressure of 17,338 kPa (2500 psig) and a confining stress of 27,680 kPa (4000 psig). Following the forced imbibition experiments, we analyzed the cores for potential changes in permeability and porosity. Quantification of the ion content of the injected and recovered fluids was also performed using Ion Chromatography (IC). The IC analysis of the recovered fluids indicates substantial interactions and geochemical reactions between the invading fluids and the shale cores. The injection of flow-back fluids shows significant impact on the flow-through characteristics, with untreated flow-back fluids, which have the highest cation and anion content, also exhibiting the highest observable reductions in permeability (>90%).

defects, mechanical behavior, carbon sequestration↗

Relationship between respiratory quotient, nitrification, and nitrous oxide emissions in a forced aerated composting process

Highlights: • RQ can be an indicator of N{sub 2}O emission in forced aerated composting process. • Emission of N{sub 2}O with nitrification was observed with RQ decrease. • Mass balances demonstrated the RQ decrease was caused by nitrification. • Conversion ratio of oxidized ammonia and total N to N{sub 2}O were ∼2.7%. - Abstract: We assessed the relationship between respiratory quotient (RQ) and nitrification and nitrous oxide (N{sub 2}O) emission in forced aerated composting using lab-scale reactors. Relatively high RQ values from degradation of readily degradable organics initially occurred. RQ then stabilized at slightly lower values, then decreased. Continuous emission of N{sub 2}O was observed during the RQ decrease. Correlation between nitrification and N{sub 2}O emission shows that the latter was triggered by nitrification. Mass balances demonstrated that the O{sub 2} consumption of nitrification (∼24.8 mmol) was slightly higher than that of CO{sub 2} emission (∼20.0 mmol), indicating that the RQ decrease was caused by the occurrence of nitrification. Results indicate that RQ is a useful index, which not only reflects the bioavailability of organics but also predicts the occurrence of nitrification and N{sub 2}O emission in forced aerated composting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The effects of forced small-wavelength, finite-bandwidth initial perturbations and miscibility on the turbulent Rayleigh–Taylor instability

Rayleigh–Taylor instability experiments are performed using both immiscible and miscible incompressible liquid combinations having a relatively large Atwood number of $A\equiv ({\it\rho}_{2}-{\it\rho}_{1})/({\it\rho}_{2}+{\it\rho}_{1})=0.48$ . The liquid-filled tank is attached to a test sled that is accelerated downwards along a vertical rail system using a system of weights and pulleys producing approximately $1g$ net acceleration. The tank is backlit and images are digitally recorded using a high-speed video camera. The experiments are either initiated with forced initial perturbations or are left unforced. The forced experiments have an initial perturbation imposed by vertically oscillating the liquid-filled tank to produce Faraday waves at the interface. The unforced experiments rely on random interfacial fluctuations, resulting from background noise, to seed the instability. The main focus of this study is to determine the effects of forced initial perturbations and the effects of miscibility on the growth parameter, ${\it\alpha}$ . Measurements of the mixing-layer width, $h$ , are acquired, from which ${\it\alpha}$ is determined. It is found that initial perturbations of the form used in this study do not affect measured ${\it\alpha}$ values. However, miscibility is observed to strongly affect ${\it\alpha}$ , resulting in a factor of two reduction in its value, a finding not previously observed in past experiments. In addition, all measured ${\it\alpha}$ values are found to be smaller than those obtained in previous experimental studies.

42 ENGINEERING↗

Differential formulation of the viscous history force on a particle for efficient and accurate computation

It is well known that the computation of the Basset-like history force is very demanding in terms of CPU and memory requirements, since it requires the evaluation of a history integral. We use the recent rational theory of Beylkin & Monzón ( Appl. Comput. Harmon. Anal. , vol. 19, 2005, pp. 17–48) to approximate the history kernel in the form of exponential sums to reformulate the viscous history force in a differential form. This theory allows us to approximate the history kernel in terms of exponential sums to any desired order of accuracy. This removes the need for long-time storage of the acceleration histories of the particle and the fluid. The proposed differential form approximation is applied to compute the history force on a spherical particle in a synthetic turbulent flow and a wall-bounded turbulent channel flow. Particles of various diameters are considered, and results obtained using the present technique are in reasonable agreement with those achieved using the full history integral.

Mechanics↗

Atomic Force Microscope Controlled Topographical Imaging and Proximal Probe Thermal Desorption/Ionization Mass Spectrometry Imaging

This paper reports on the development of a hybrid atmospheric pressure atomic force microscopy/mass spectrometry imaging system utilizing nano-thermal analysis probes for thermal desorption surface sampling with subsequent atmospheric pressure chemical ionization and mass analysis. The basic instrumental setup and the general operation of the system were discussed and optimized performance metrics were presented. The ability to correlate topographic images of a surface with atomic force microscopy and a mass spectral chemical image of the same surface, utilizing the same probe without moving the sample from the system, was demonstrated. Co-registered mass spectral chemical images and atomic force microscopy topographical images were obtained from inked patterns on paper as well as from a living bacterial colony on an agar gel. Spatial resolution of the topography images based on pixel size (0.2 m x 0.8 m) was better than the resolution of the mass spectral images (2.5 m x 2.0 m), which were limited by current mass spectral data acquisition rate and system detection levels.

Ovchinnikova, Olga S↗

Predictive Model of Charge Mobilities in Organic Semiconductor Small Molecules with Force-Matched Potentials

Charge mobility of crystalline organic semiconductors (OSC) is limited by local dynamic disorder. Recently, the charge mobility for several high mobility OSCs, including TIPS-pentacene, were accurately predicted from a density functional theory (DFT) simulation constrained by the crystal structure and the inelastic neutron scattering spectrum, which provide direct measures of the structure and the dynamic disorder in the length scale and energy range of interest. However, the computational expense required for calculating all of the atomic and molecular forces is prohibitive. In this work, we demonstrate the use of density functional tight binding (DFTB), a semiempirical quantum mechanical method that is 2 to 3 orders of magnitude more efficient than DFT. We show that force matching a many-body interaction potential to DFT derived forces yields highly accurate DFTB models capable of reproducing the low-frequency intricacies of experimental inelastic neutron scattering (INS) spectra and accurately predicting charge mobility. We subsequently predicted charge mobilities from our DFTB model of a number of previously unstudied structural analogues to TIPS-pentacene using dynamic disorder from DFTB and transient localization theory. The approach we establish here could provide a truly rapid simulation pathway for accurate materials properties prediction, in our vision applied to new OSCs with tailored properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Force-Free Identification of Minimum-Energy Pathways and Transition States for Stochastic Electronic Structure Theories

Here, the accurate mapping of potential energy surfaces (PESs) is crucial to our understanding of the numerous physical and chemical processes mediated by atomic rearrangements, such as conformational changes and chemical reactions, and the thermodynamic and kinetic feasibility of these processes. Stochastic electronic structure theories, e.g., Quantum Monte Carlo (QMC) methods, enable highly accurate total energy calculations that in principle can be used to construct the PES. However, their stochastic nature poses a challenge to the computation and use of forces and Hessians, which are typically required in algorithms for minimum-energy pathway (MEP) and transition state (TS) identification, such as the nudged elastic band (NEB) algorithm and its climbing image formulation. Here, we present strategies that utilize the surrogate Hessian line-search method, previously developed for QMC structural optimization, to efficiently identify MEP and TS structures without requiring force calculations at the level of the stochastic electronic structure theory. By modifying the surrogate Hessian algorithm to operate in path-orthogonal subspaces and at saddle points, we show that it is possible to identify MEPs and TSs by using a force-free QMC approach. We demonstrate these strategies via two examples, the inversion of the ammonia (NH 3 ) molecule and the nucleophilic substitution (S N 2) reaction F – + CH 3 F → FCH 3 + F – . We validate our results using Density Functional Theory (DFT)- and Coupled Cluster (CCSD, CCSD(T))-based NEB calculations. We then introduce a hybrid DFT-QMC approach to compute thermodynamic and kinetic quantities, free energy differences, rate constants, and equilibrium constants that incorporates stochastically optimized structures and their energies, and show that this scheme improves upon DFT accuracy. Our methods generalize straightforwardly to other systems and other high-accuracy theories that similarly face challenges computing energy gradients, paving the way for highly accurate PES mapping, transition state determination, and thermodynamic and kinetic calculations at significantly reduced computational expense.

Iyer, Gopal R.↗

Similarity Metric for Data Optimization and Efficient Training of Reactive Machine Learning Force Fields for Hydrocarbon Radiolysis

Radiolysis is a common approach to sterilize polymers, chemically modify them for upcycling, and accelerate their decomposition for recycling purposes. Reactive molecular dynamics (MD) simulations provide a powerful tool to generate atomic-level trajectories of the reactive processes and quantify radiolytic chemical degradation pathways. For this, machine learning (ML) surrogate models for reactive force fields with quantum mechanical accuracy are now widely used, which require ML training data sets that can provide information on atomic environments for target chemical systems. However, radiolysis chemistry can be highly complex and diverse, which poses significant challenges for generating training data to parametrize ML models. In this regard, we developed a method for optimizing the training data set using a cosine similarity metric to help guide training set selection for radiolysis of polyethylene, a model hydrocarbon polymer, as well as to enhance the transferability of our reactive ML force field (MLFF) to a variety of molecular and polymeric systems. Our approach performs atom-by-atom comparisons between local atomic environments to pinpoint important data points associated with rare and localized events, such as radiolysis damage within structures. We apply this approach to train the Chebyshev Interaction Model for Efficient Simulation (ChIMES) MLFF model, which expresses the atomic interaction potentials in terms of linear combinations of many-body Chebyshev polynomials. We first show that our method can reduce our training set size by ∼70% while improving overall accuracy compared to more standard MD model fitting approaches. We then validate our optimum model against diverse hydrocarbon simulation data, including simple alkanes and systems with unsaturated carbon bonds, over a wide range of thermodynamic conditions. Finally, we use our ChIMES model to perform MD simulations of radiolytic damage with large-scale systems that help avoid system size effects. Overall, our approach yields an MD force field that retains most of the accuracy of the underlying quantum method while yielding many orders of improvement in computational efficiency. In conclusion, our efforts will have impact on future hydrocarbon polymer radiolysis studies, where the chemical details of the polymer–radiation interactions can have a strong effect on the resulting products observed in experiments.

Hydrocarbons↗

Development of CHARMM-Compatible Force-Field Parameters for Cobalamin and Related Cofactors from Quantum Mechanical Calculations

Corrinoid cofactors such as cobalamin are used by many enzymes and are essential for most living organisms. Therefore, there is broad interest in investigating cobalamin–protein interactions with molecular dynamics simulations. Previously developed parameters for cobalamins are based mainly on crystal structure data. Here, we report CHARMM-compatible force field parameters for several corrinoids developed from quantum mechanical calculations. We provide parameters for corrinoids in three oxidation states, Co 3+ , Co 2+ , and Co 1+ , and with various axial ligands. Lennard-Jones parameters for the cobalt center in the Co(II) and Co(I) states were optimized using a helium atom probe, and partial atomic charges were obtained with a combination of natural population analysis (NPA) and restrained electrostatic potential (RESP) fitting approaches. The Force Field Toolkit was used to optimize all bonded terms. The resulting parameters, determined solely from calculations of cobalamin alone or in water, were then validated by assessing their agreement with density functional theory geometries and by analyzing molecular dynamics simulation trajectories of several corrinoid proteins for which X-ray crystal structures are available. In each case, we obtained excellent agreement with the reference data. In comparison to previous CHARMM-compatible parameters for cobalamin, we observe a better agreement for the fold angle and lower RMSD in the cobalamin binding site. In conclusion, the approach described here is readily adaptable for developing CHARMM-compatible force-field parameters for other corrinoids or large biomolecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generating Converged Accurate Free Energy Surfaces for Chemical Reactions with a Force-Matched Semiempirical Model

Here, we demonstrate the capability of creating robust density functional tight binding (DFTB) models for chemical reactivity in prebiotic mixtures through force matching to short time scale quantum free energy estimates. Molecular dynamics using density functional theory (DFT) is a highly accurate approach to generate free energy surfaces for chemical reactions, but the extreme computational cost often limits the time scales and range of thermodynamic states that can feasibly be studied. In contrast, DFTB is a semiempirical quantum method that affords up to a thousandfold reduction in cost and can recover DFT-level accuracy. Here, we show that a force-matched DFTB model for aqueous glycine condensation reactions yields free energy surfaces that are consistent with experimental observations of reaction energetics. Convergence analysis reveals that multiple nanoseconds of combined trajectory are needed to reach a steady-fluctuating free energy estimate for glycine condensation. Predictive accuracy of force-matched DFTB is demonstrated by direct comparison to DFT, with the two approaches yielding surfaces with large regions that differ by only a few kcal mol –1 .

36 MATERIALS SCIENCE↗

Development of a Reactive Force Field for Simulating Photoinitiated Acrylate Polymerization

Light-driven and photo-curable polymer based additive manufacturing (AM) has enormous potential due to its excellent resolution and precision. Acrylated radical chain-growth polymerized resins are widely used in photopolymer AM due to their fast kinetics, and often serve as a departure point for developing other resin materials for photopolymer-based AM technologies. For successful control of the photopolymer resins, the molecular basis of the acrylate free-radical polymerization has to be understood in detail. We present an optimized reactive force field (ReaxFF) for molecular dynamics (MD) simulations of acrylate polymer resins that captures radical polymerization thermodynamics and kinetics. The force field is trained against an extensive training set including density functional theory (DFT) calculations of reaction pathways along the radical polymerization from methyl acrylate to methyl butyrate, bond dissociation energies, and structures and partial charges of several molecules and radicals. We also found that it was critical to train the force field against an incorrect, nonphysical reaction pathway observed in simulations that used parameters not optimized for acrylate polymerization. As a result, the parameterization process utilizes a parallelized search algorithm, and the resulting model can describe polymer resin formation, crosslinking density, conversion rate, and residual monomers of the complex acrylate mixtures.

36 MATERIALS SCIENCE↗

Force Fields for High Concentration Aqueous KOH Solutions and Zincate Ions

Motivated by increasing interest in electrochemical devices that include highly alkaline electrolytes, we investigated two force fields for potassium hydroxide (KOH) at high concentrations in water. The “FNB” model uses the SPC/E water model, while the “FHM” model uses the TIP4P/2005 water model. Here, we also developed parameters to describe zincate ions in these solutions. The density and viscosity of KOH using the FHM model are in better agreement with experiment than the values from the FNB model. Comparing the properties of the zincate solutions to the available experimental data, we find that both force fields agree reasonably well, although the FHM parameters give a better prediction of the viscosity. The developed force field parameters can be used in future simulations of zincate/KOH solutions in combination with other species of interest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate Force Field for Carbon Dioxide–Silica Interactions Based on Density Functional Theory

Fluid–silica interfaces are ubiquitous in chemistry, occurring in both natural geochemical environments and practical applications ranging from separations to catalysis. Simulations of these interfaces have been, and continue to be, a significant avenue for understanding their behavior. A constraining factor, however, is the availability of accurate force fields. Most simulations use traditional “mixing rules” to determine nonbonded dispersion interactions, an approach that has not been critically examined. Here, in this study, we present Lennard-Jones parameters for the interaction of carbon dioxide with silica interfaces that are optimized to reproduce density functional theory (DFT)-based binding energies. The modeling is based on the recently developed silica-DDEC force field, whose atomic charges are consistent with DFT calculations. Standard mixing rules are found to predict weaker CO 2 binding to silica than that obtained from DFT, an effect corrected by the optimized parameters given here. This behavior extends to other silica force fields (Clayff and Gulmen-Thompson), and the present Lennard-Jones parameters improve their performance as well. The effects of improved Lennard-Jones parameters on the structural and dynamical properties of condensed CO 2 in silica slit pores are also examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular theory and the effects of solute attractive forces on hydrophobic interactions

The role of solute attractive forces on hydrophobic interactions is studied by coordinated development of theory and simulation results for Ar atoms in water. In this paper, we present a concise derivation of the local molecular field (LMF) theory for the effects of solute attractive forces on hydrophobic interactions, a derivation that clarifies the close relation of LMF theory to the EXP approximation applied to this problem long ago. The simulation results show that change from purely repulsive atomic solute interactions to include realistic attractive interactions diminishes the strength of hydrophobic bonds. For the Ar–Ar rdfs considered pointwise, the numerical results for the effects of solute attractive forces on hydrophobic interactions are opposite in sign and larger in magnitude than predicted by LMF theory. That comparison is discussed from the point of view of quasichemical theory, and it is suggested that the first reason for this difference is the incomplete evaluation within LMF theory of the hydration energy of the Ar pair. With a recent suggestion for the system-size extrapolation of the required correlation function integrals, the Ar–Ar rdfs permit evaluation of osmotic second virial coefficients B 2 . Those B 2 ’s also show that incorporation of attractive interactions leads to more positive (repulsive) values. With attractive interactions in play, B 2 can change from positive to negative values with increasing temperatures. Furthermore, this is consistent with the puzzling suggestions of decades ago that B 2 ≈ 0 for intermediate cases of temperature or solute size. In all cases here, B 2 becomes more attractive with increasing temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Role of Solute Attractive Forces in the Atomic-Scale Theory of Hydrophobic Effects

The role that van der Waals (vdW) attractive forces play in the hydration and association of atomic hydrophobic solutes such as argon (Ar) in water is reanalyzed using the local molecular field (LMF) theory of those interactions. In this problem, solute vdW attractive forces can reduce or mask hydrophobic interactions as measured by contact peak heights of the ArAr correlation function compared to reference results for purely repulsive core solutes. Nevertheless, both systems exhibit a characteristic hydrophobic inverse temperature behavior in which hydrophobic association becomes stronger with increasing temperature through a moderate temperature range. The new theoretical approximation obtained here is remarkably simple and faithful to the statistical mechanical LMF assessment of the necessary force balance. In conclusion, our results extend and significantly revise approximations made in a recent application of the LMF approach to this problem and, unexpectedly, support a theory of nearly 40 years ago.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomistic Scale Analysis of the Carbonization Process for C/H/O/N-Based Polymers with the ReaxFF Reactive Force Field

During the carbonization process of raw polymer precursors, graphitic structures can evolve. The presence of these graphitic structures affects mechanical properties of the carbonized carbon fibers. To gain a better understanding of the chemistry behind the evolution of these structures, we performed atomistic-scale simulations using the ReaxFF reactive force field. Three different polymers were considered as a precursor: idealized ladder PAN (polyacrylonitrile), a proposed oxidized PAN, and poly(p-phenylene- 2,6-benzobisoxazole). We determined the underlying molecular details of polymer conversion into a carbon fiber structure. Because these are C/H/O/ N-based polymers, we first developed an improved force field for C/H/O/N chemistry based on the density functional theory data with a particular focus on N2 formation kinetics and its interactions with polymer-associated radicals formed during the carbonization process. Then, using this improved force field, we performed atomistic-scale simulations of the initial stage of the carbonization process for the considered polymers. On the basis of our simulation data, the molecular pathways for the formation of low-molecular-weight gas species and all-carbon ring formation were determined. We also examined the possible alignment of the developed all-carbon 6-membered ring clusters, which is crucial for the further graphitic structure evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Screening of Cationic Zeolites for n -Butane/Methane Separations Using Quantitatively Accurate First-Principles-Derived Force Fields

We developed force fields for linear alkanes in Na and Ca-exchanged zeolites based on periodic first-principles calculations with coupled cluster corrections. These force fields were validated by comparing the simulated adsorption properties with extensive experimental data. As an example of using these force fields, we screened silica and aluminosilicate zeolites for separation of n-butane/methane mixtures in several different separation processes. A key step in this screening was the use of an interpolation method to create accurate zeolite structures that take account of the lattice constant changes for different Si/Al ratios for a given zeolite topology. We focused on zeolite structures that have known synthesis routes, so the materials selected from our calculations can be tested experimentally. Several promising materials that show good separation performance were selected for more detailed simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine-Learned Force Field for Molecular Dynamics Simulations of Nonequilibrium Ammonia Synthesis on Iron Catalysts

Ammonia (NH 3 ) is one of the most important industrial chemicals. The conventional NH 3 synthesis method-the Haber–Bosch process-converts atmospheric nitrogen (N 2 ) into NH 3 using H 2 with an iron (Fe) catalyst. However, this process requires high pressures (100–200 atm) and temperatures (700–800 K) near thermal equilibrium. Recently, Fe-based nanocatalysts have been reported to produce promising NH 3 yields under atmospheric pressures and temperature-modulated nonequilibrium conditions. Understanding the mechanism of nonequilibrium catalysis with programmed temperature variation could help to optimize this fully electrified and less energy-intensive process. Although reactive molecular dynamics (RMD) simulations can be a useful tool to model nonequilibrium catalytic processes, they require the development of accurate force fields (i.e., interatomic potentials). Here, we present a machine-learned (ML) force field within the Deep Potential MD (DPMD) framework, trained using periodic density functional theory (DFT) calculations, to model NH 3 synthesis on Fe catalysts with various surface adsorbates such as *N, *H, *N 2 , *H 2 , *NH, *NH 2 , and *NH 3 . Here, we generated the DFT data from static models of elementary reactions on the most stable (110) surface of body-centered cubic Fe, which then were augmented by data from constant number of particles–volume–temperature (NVT) DFT-MD trajectories at various temperatures. Finally, we utilized the fully optimized ML force field to investigate reaction dynamics at an Fe(110) surface at linearly increasing temperatures using NVT-DPMD simulations. Our simulations indicate that pulsed temperature ramping could prove favorable for NH3 synthesis. For example, we conducted ramping under multiple sets of conditions: (i) from 900 to 1200 K over periods of 0.1–0.3 ns for Fe surfaces precovered with N or NH along with H; and (ii) from 300 to 600 K over 0.1–0.3 ns for Fe surfaces precovered with NH 3 . While our simulations so far are limited to short time scales (very rapid heating), these observations shed light on the mechanism of the high NH 3 synthesis rate achieved in a novel temperature-modulated nonequilibrium catalytic reactor using pulsed heating and cooling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗