Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “engineered form”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Increasing Diversity on Spacecraft Mission Teams Reduces Risk

Many of the NASA spacecraft sent into Earth orbit and throughout the Solar System are competitively selected and led by principal investigators (PIs). These senior scientists are responsible for directing research activities, managing the use of funds, and reporting to the funding agency. Additionally, the European Space Agency (ESA) has competitively selected missions that are led by ESA-nominated project scientists and include instruments that are overseen by PIs. Usually, the PIs and project scientists form a science working team that provides scientific leadership of the mission. These NASA and ESA PI roles require a deep understanding of the mission’s scientific goals and engineering design aspects. And, importantly, these roles also require skills in team management.

Kathleen E. Mandt↗
DOE OSTI2020

Status of INL Aged A709 Mechanical Testing

A709 was selected to be qualified in Section III, Division 5 of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code. Idaho National Laboratory (INL), Argonne National Laboratory and Oak Ridge National Laboratory are collaborating to develop and qualify A709 plate. Aging A709 to form beneficial precipitates prior to service is investigated. One tensile test, five creep-rupture tests, and eight cyclic tests have been completed on aged A709. Two creep-rupture tests are in progress.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Method of fabricating a three-dimensionally patterned mechanical energy absorptive material

A three-dimensionally patterned energy absorptive material and fabrication method having multiple layers of patterned filaments extrusion-formed from a curable pre-cursor material and stacked and cured in a three-dimensionally patterned architecture so that the energy absorptive material produced thereby has an engineered bulk property associated with the three-dimensionally patterned architecture.

Duoss, Eric B.↗
NASA NTRS2006

Hard and Soft Constraints in Reliability-Based Design Optimization

This paper proposes a framework for the analysis and design optimization of models subject to parametric uncertainty where design requirements in the form of inequality constraints are present. Emphasis is given to uncertainty models prescribed by norm bounded perturbations from a nominal parameter value and by sets of componentwise bounded uncertain variables. These models, which often arise in engineering problems, allow for a sharp mathematical manipulation. Constraints can be implemented in the hard sense, i.e., constraints must be satisfied for all parameter realizations in the uncertainty model, and in the soft sense, i.e., constraints can be violated by some realizations of the uncertain parameter. In regard to hard constraints, this methodology allows (i) to determine if a hard constraint can be satisfied for a given uncertainty model and constraint structure, (ii) to generate conclusive, formally verifiable reliability assessments that allow for unprejudiced comparisons of competing design alternatives and (iii) to identify the critical combination of uncertain parameters leading to constraint violations. In regard to soft constraints, the methodology allows the designer (i) to use probabilistic uncertainty models, (ii) to calculate upper bounds to the probability of constraint violation, and (iii) to efficiently estimate failure probabilities via a hybrid method. This method integrates the upper bounds, for which closed form expressions are derived, along with conditional sampling. In addition, an l(sub infinity) formulation for the efficient manipulation of hyper-rectangular sets is also proposed.

Crespo, L.uis G.↗
DOE OSTI2024

Bioblendstocks to Optimize Mixing Controlled Compression Ignition (MCCI) Engines

In this project, a team of researchers from the University of Massachusetts Lowell, the University of Maine, and Mainstream Engineering developed an integrated process for the product of bioblendstocks to optimize mixing controlled compression ignition (MCCI) engines. The objective was to improve the energy density, sooting propensity, and cetane number of base diesel fuel while maintaining cold weather behavior. The process converts woody biomass (e.g. sawmill residues) into bio-oil through selective fast pyrolysis; the bio-oil is then selectively upgraded to form selectively oxygenated, minimally-branched hydrocarbons using non-noble metal catalysts in combination with metal-catalyzed hydrogenation. Advanced predictive models, in conjunction with existing property databases, and experimental testing are used to evaluate overall bioblendstock properties and their impact on base diesel fuel. An iterative, targeted upgrading approach was implemented to optimize the proposed bioblendstock’s properties. Assessment methodologies included techno-economic analysis, life-cycle assessment, property testing, and engine testing. Ultimately, the project team successfully produced a viable bioblendstock while identifying critical process points related to scale-up efforts. It was found that producing pyrolysis oils at 500 degrees C and with pine particle sizes of 1-2 mm led to bio-oil with a higher yield (of approximately 45 wt%) and rich amounts of aromatic alcohols. The resultant pyrolysis oil was then upgraded using a sequence of mild hydrotreating, followed by catalytic etherification and esterification, followed by another final mild hydrotreating to produce a blendstock containing saturated species with a limited, but non-zero, amount of oxygen. The aromatic alcohols produced by pyrolysis were especially helpful in this regard, as the resulting bicycloethers and derivatives exhibited high cetane numbers. While most bulk properties of the bioblendstock met or exceeded targeted thresholds, viscosity and cloud point notably fell outside the expected range; this could be addressed by blending limits and/or through the use of additives that are commonplace in current refinding practices. Identification of a bioblendstock that can be produced economically at scale while improving the performance and emissions characteristics of internal combustion engines positively affects the economy by boosting domestic fuel production and the environment by decreasing harmful emissions and increasing efficiency.

09 BIOMASS FUELS↗
NASA NTRS2004

Thermodynamic Modeling of a Solid Oxide Fuel Cell to Couple with an Existing Gas Turbine Engine Model

The Controls and Dynamics Technology Branch at NASA Glenn Research Center are interested in combining a solid oxide fuel cell (SOFC) to operate in conjunction with a gas turbine engine. A detailed engine model currently exists in the Matlab/Simulink environment. The idea is to incorporate a SOFC model within the turbine engine simulation and observe the hybrid system's performance. The fuel cell will be heated to its appropriate operating condition by the engine s combustor. Once the fuel cell is operating at its steady-state temperature, the gas burner will back down slowly until the engine is fully operating on the hot gases exhausted from the SOFC. The SOFC code is based on a steady-state model developed by The U.S. Department of Energy (DOE). In its current form, the DOE SOFC model exists in Microsoft Excel and uses Visual Basics to create an I-V (current-voltage) profile. For the project's application, the main issue with this model is that the gas path flow and fuel flow temperatures are used as input parameters instead of outputs. The objective is to create a SOFC model based on the DOE model that inputs the fuel cells flow rates and outputs temperature of the flow streams; therefore, creating a temperature profile as a function of fuel flow rate. This will be done by applying the First Law of Thermodynamics for a flow system to the fuel cell. Validation of this model will be done in two procedures. First, for a given flow rate the exit stream temperature will be calculated and compared to DOE SOFC temperature as a point comparison. Next, an I-V curve and temperature curve will be generated where the I-V curve will be compared with the DOE SOFC I-V curve. Matching I-V curves will suggest validation of the temperature curve because voltage is a function of temperature. Once the temperature profile is created and validated, the model will then be placed into the turbine engine simulation for system analysis.

Brinson, Thomas E.↗
DOE OSTI2021

An orthogonal metabolic framework for one-carbon utilization

Metabolic engineering often entails concurrent engineering of substrate utilization, central metabolism, and product synthesis pathways to maximize the conversion of a carbon substrate into desired product(s). Here, we report an alternative approach using synthetic pathways for C1 bioconversion that are orthogonal to the host metabolic network, thus minimizing interdependency on native metabolism and enabling more efficient biocatalysts. Here, the engineered pathways are based on formyl-CoA elongation (FORCE) reactions catalyzed by the enzyme 2-hydroxyacyl-CoA lyase (HACL) and generate multi-carbon products directly from C1 elongation units in the form of formyl-CoA. Herein, we use thermodynamic and stoichiometric analyses to evaluate different FORCE pathway variants, including aldose elongation, α-reduction, and aldehyde elongation. Promising variants were further prototyped using cell-free systems (purified enzymes and cell extracts) as well as resting and growing cultures of non-methylotrophic bacterium Escherichia coli. We demonstrate that C1 substrates formate, formaldehyde, and methanol can be used as inputs for FORCE pathways and that FORCE reactions can serve as a platform for varied product synthesis including glycolate, ethylene glycol, ethanol, and glycerate. Furthermore, the orthogonal FORCE pathways have the potential to be integrated with host metabolism for synthetic methylotrophy by the production of native growth substrates as demonstrated in a two-strain culture system.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2012

NASA Software Engineering Benchmarking Effort

Benchmarking was very interesting and provided a wealth of information (1) We did see potential solutions to some of our "top 10" issues (2) We have an assessment of where NASA stands with relation to other aerospace/defense groups We formed new contacts and potential collaborations (1) Several organizations sent us examples of their templates, processes (2) Many of the organizations were interested in future collaboration: sharing of training, metrics, Capability Maturity Model Integration (CMMI) appraisers, instructors, etc. We received feedback from some of our contractors/ partners (1) Desires to participate in our training; provide feedback on procedures (2) Welcomed opportunity to provide feedback on working with NASA

Godfrey, Sally↗
DOE OSTI2025

How Inverter-Based Resources (IBRs) Affect Protection Relay Elements

Inverter-based resources (IBRs) exhibit fault responses that differ significantly from those of synchronous generators, which can challenge the reliable operation of many commonly used power system protection elements. The fault response of IBRs is primarily influenced by their control algorithms and configurations, but the impact of these controls on protection relays is not yet fully understood. This presentation provides a comprehensive study of how IBR modeling and controls affect transmission line protection. Key modeling and control aspects include the DC source, inverter model, power level control, current control, and current limiting. The study reveals that certain aspects - such as the type of DC source (battery, PV, or hybrid), inverter model (average vs. switching), and power level control methods (PQ dispatch vs. Vdc-Vac control for grid-following IBRs, and droop vs. VSM for grid-forming IBRs) - do not significantly affect relay response. However, faster control loops, such as current control and current limiting, do influence the relay behavior. Additionally, the study explores the effects of other factors, including momentary cessation, operating points, fast/slow current responses, and grid strength on relay performance. Finally, the study offers recommendations for both IBR and protection engineers to improve IBR fault response and enhance the reliability of protection systems.

14 SOLAR ENERGY↗
DOE OSTI2024

Optimization of Structurally Enhanced Solder Transient Liquid Phase Bonding

High temperature packaging technologies are a necessity for high temperature capable devices. SAC305 solder has an operational limit of 174°C imposed by creep effects which aligns well with current junction temperature limits of 175°C. Wide band gap semiconductor materials have the potential to reach junction temperatures of up to 800°C that are not currently attainable with significant reliability. Capitalizing on this potential will requires substrates and attachments that can operate well beyond the current 175°C standard. Silver sintering pastes have received widespread interest as a high temperature attachment alternative. However, the process requires high pressure bonding in an inert environment to achieve acceptable bond quality. Transient liquid phase (TLP) sintering is capable of good bond quality without pressure requirements but suffers from low thermal conductivity and only slightly reduced cost compared to silver sintering. SAC305 solder contains the same constituent materials for TLP as available copper-tin TLP sintering paste. By introducing engineered surface structures into the bond, intermetallic formation can be accelerated producing a bond similar to TLP sintering but in an ambient environment and for reduced cost. While this process has been demonstrated, it has not yet been optimized. Currently bonds are formed using a 75 μm stencil on substrate surface structures 24 μm tall, covering 19% of the bonding area. The process takes about 4 hours not including the formation of surface structures. Here, this study will center on the effects of stencil thickness and coating methods. Samples will be analyzed by scanning acoustic microscopy, die shear testing and cross sectional scanning acoustic microscopy.

42 ENGINEERING↗
NASA NTRS2007

Feasibility Study of Vapor-Mist Phase Reaction Lubrication Using a Thioether Liquid

A primary technology barrier preventing the operation of gas turbine engines and aircraft gearboxes at higher temperatures is the inability of currently used liquid lubricants to survive at the desired operating conditions over an extended time period. Current state-of-the-art organic liquid lubricants rapidly degrade at temperatures above 300 C; hence, another form of lubrication is necessary. Vapor or mist phase reaction lubrication is a unique, alternative technology for high temperature lubrication. The majority of past studies have employed a liquid phosphate ester that was vaporized or misted, and delivered to bearings or gears where the phosphate ester reacted with the metal surfaces generating a solid lubricious film. This method resulted in acceptable operating temperatures suggesting some good lubrication properties, but the continuous reaction between the phosphate ester and the iron surfaces led to wear rates unacceptable for gas turbine engine or aircraft gearbox applications. In this study, an alternative non-phosphate liquid was used to mist phase lubricate a spur gearbox rig operating at 10,000 rpm under highly loaded conditions. After 21 million shaft revolutions of operation the gears exhibited only minor wear.

Morales, Wilfredo↗
DOE OSTI2026

Phase Transformation and Water Adsorption Behavior of As‐Deposited and Annealed Ru Metal Thin Films Prepared by Atomic Layer Deposition

ABSTRACT Surfaces play a central role in catalytic processes, and understanding the transformation of ruthenium metal into ruthenium oxide during annealing is essential for tailoring functional catalytic interfaces. In this study, we systematically investigate ≈22 nm thick Ru metal films deposited by atomic layer deposition (ALD) at 300°C, focusing on their chemical composition, structural evolution, and surface hydration behavior following post‐deposition annealing in air from 400 to 600°C. Lab‐based and synchrotron X‐ray photoelectron spectroscopy (XPS) reveal a gradual conversion from metallic Ru to fully oxidized Ru 4+ with increasing annealing temperature, accompanied by a corresponding increase in lattice oxygen. X‐ray diffraction (XRD) shows amorphous Ru oxide phases at 400°C and 500°C that evolve into crystalline RuO 2 at 600°C, while atomic force microscopy (AFM) indicates enhanced grain growth and surface roughening upon annealing. Ambient‐pressure XPS (AP‐XPS) under controlled H 2 O vapor environments (1–17 Torr) demonstrates that samples annealed at 400°C and 500°C exhibit initially high hydroxyl coverage that decreases with increasing water vapor pressure, concurrent with a rise in molecular H 2 O adsorption. In contrast, the crystalline RuO 2 surface formed at 600°C maintains stable hydroxylation and supports increased water uptake. Overall, this work provides fundamental insight into Ru oxide–H 2 O interactions and establishes design principles for engineering oxide surfaces optimized for electrocatalytic applications.

APXPS↗
DOE OSTI2022

A universal method to compare parts from STEP files

Abstract Model Based Definition (MBD) captures the complete specification of a part in digital form and leverages (at least) the universal “Standard for the Exchange of Product” (STEP) file format. MBD has revolutionized manufacturing due to time and cost savings associated with containing all engineering data within a single digital source. This work presents a novel method to transform digital definitions in any given STEP file into a tensor-like structure that is unique for each part and can be used to regenerate the original STEP file completely. Resulting STEP tensors are amenable to part comparison based on various part specifications in a general and straightforward manner. Here, part similarity is evaluated among sets of parts according to specific geometry, material composition, and design intent. Importantly, specification similarity can be quantified using only the tensors’ structure. As such, this approach is not limited to families of geometric shapes, part types, or fabrication methods; nor does it require any prior knowledge about the parts being compared.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum Phase Engineering of Two-Dimensional Post-Transition Metals by Substrates: Toward a Room-Temperature Quantum Anomalous Hall Insulator

In this work, we propose a new strategy to engineer topological and magnetic properties of two-dimensional (2D) hexagonal lattices consisting of post-transition metals. Our first-principles calculations demonstrate that substrates serve as templates to form 2D lattices with high thermodynamic stability, where their topological properties as well as magnetic properties sensitively change as a function of lattice constants, i.e., the system undergoes a first-order phase transition from nonmagnetic to ferromagnetic state above a critical lattice constant. Consequently, substrates can be used to explore versatile magnetic, electronic, and quantum topological properties. We establish phase diagrams of versatile quantum phases in terms of exchange coupling and spin–orbit coupling effectively tuned by the lattice constants. We further reveal the first room-temperature quantum anomalous Hall (QAH) effect, i.e., Sn on 2√3 × 2√3 graphane is a QAH insulator with a large spin–orbit coupling gap of ~0.2 eV and a Curie temperature of ~380 K by using the 2D anisotropic Heisenberg model.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ni 3 Si 2 nanowires for efficient electron field emission and limitations of the Fowler–Nordheim model

This article reports on top-down nanofabricated Ni 3 Si 2 nanowires and tests of their electron field emission capabilities. Here, the results include low turn-on electric field, E ON , moderate work function, Φ, and the field enhancement factor, β, customizable through nanofabrication. The article also reports on the issues ahead in the field of nanowires-based electron mission, as there are quantitative limitations of the applicability of the Fowler–Nordheim model, which will become increasingly apparent as we continue to optimize the field emission of electrons. To this end, we suggest adding the studies of surface-to-volume ratio effects of the nanowires as another standard for comparison in order to lead to the input form of the density of states as quantum effects becoming more prominent.

42 ENGINEERING↗
DOE OSTI2021

Universal phase dynamics in VO 2 switches revealed by ultrafast operando diffraction

Understanding the pathways and time scales underlying electrically driven insulator-metal transitions is crucial for uncovering the fundamental limits of device operation. Using stroboscopic electron diffraction, we perform synchronized time-resolved measurements of atomic motions and electronic transport in operating vanadium dioxide (VO 2 ) switches. We discover an electrically triggered, isostructural state that forms transiently on microsecond time scales, which is shown by phase-field simulations to be stabilized by local heterogeneities and interfacial interactions between the equilibrium phases. This metastable phase is similar to that formed under photoexcitation within picoseconds, suggesting a universal transformation pathway. Our results establish electrical excitation as a route for uncovering nonequilibrium and metastable phases in correlated materials, opening avenues for engineering dynamical behavior in nanoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Swab Testing Results Summary

Swabs Tested: 1. FAST Spiral NP Swab, designed and supplied by Abiogenix, printed from polyamide 11 (Nylon) using HP Multi Jet Fusion printers. 2. NP Swab designed by USF Health and Northwell Health in collaboration with Formlabs. Printed at LLNL using the Form 3B stereolithography printer in Formlabs Surgical Guide resin.

42 ENGINEERING↗