Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Electron Energetics in the Martian Dayside Ionosphere: Model Comparisons with MAVEN Data

This paper presents a study of the energetics of the dayside ionosphere of Mars using models and data from several instruments on board the Mars Atmosphere and Volatile EvolutioN spacecraft. In particular, calculated photoelectron fluxes are compared with suprathermal electron fluxes measured by the Solar Wind Electron Analyzer, and calculated electron temperatures are compared with temperatures measured by the Langmuir Probe and Waves experiment. The major heat source for the thermal electrons is Coulomb heating from the suprathermal electron population, and cooling due to collisional rotational and vibrational CO2 dominates the energy loss. The models used in this study were largely able to reproduce the observed high topside ionosphere electron temperatures (e.g., 3000 K at 300 km altitude) without using a topside heat flux when magnetic field topologies consistent with the measured magnetic field were adopted. Magnetic topology affects both suprathermal electron transport and thermal electron heat conduction. The effects of using two different solar irradiance models were also investigated. In particular, photoelectron fluxes and electron temperatures found using the Heliospheric Environment Solar Spectrum Radiation irradiance were higher than those with the Flare Irradiance Spectrum Model-Mars. The electron temperature is shown to affect the O2(+) dissociative recombination rate coefficient, which in turn affects photochemical escape of oxygen from Mars.

magnetic topology↗

Plasma Physics Approximations in Ares

Lee & More derived analytic forms for the transport properties of a plasma. Many hydro-codes use their formulae for electrical and thermal conductivity. The coefficients are complex functions of Fermi-Dirac integrals, F n ( μ/θ ), the chemical potential, μ or ζ = ln(1+e μ/θ ), and the temperature, θ = kT. Since these formulae are expensive to compute, rational function approximations were fit to them. Approximations are also used to find the chemical potential, either μ or ζ . The fits use ζ as the independent variable instead of μ/θ . New fits are provided for A α (ζ ),A β (ζ ), ζ, f(ζ ) = (1 + e -μ/θ )F 1/2 (μ/θ), F 1/2 '/F 1/2 , F c α , and F c β . In each case the relative error of the fit is minimized since the functions can vary by many orders of magnitude. The new fits are designed to exactly preserve the limiting values in the non-degenerate and highly degenerate limits or as ζ→ 0 or ∞. The original fits due to Lee & More and George Zimmerman are presented for comparison.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pulsed-power-driven cylindrical liner implosions of laser preheated fuel magnetized with an axial field

The radial convergence required to reach fusion conditions is considerably higher for cylindrical than for spherical implosions since the volume is proportional to r{sup 2} versus r{sup 3}, respectively. Fuel magnetization and preheat significantly lowers the required radial convergence enabling cylindrical implosions to become an attractive path toward generating fusion conditions. Numerical simulations are presented indicating that significant fusion yields may be obtained by pulsed-power-driven implosions of cylindrical metal liners onto magnetized (>10 T) and preheated (100-500 eV) deuterium-tritium (DT) fuel. Yields exceeding 100 kJ could be possible on Z at 25 MA, while yields exceeding 50 MJ could be possible with a more advanced pulsed power machine delivering 60 MA. These implosions occur on a much shorter time scale than previously proposed implosions, about 100 ns as compared to about 10 mus for magnetic target fusion (MTF) [I. R. Lindemuth and R. C. Kirkpatrick, Nucl. Fusion 23, 263 (1983)]. Consequently the optimal initial fuel density (1-5 mg/cc) is considerably higher than for MTF (approx1 mug/cc). Thus the final fuel density is high enough to axially trap most of the alpha-particles for cylinders of approximately 1 cm in length with a purely axial magnetic field, i.e., no closed field configuration is required for ignition. According to the simulations, an initial axial magnetic field is partially frozen into the highly conducting preheated fuel and is compressed to more than 100 MG. This final field is strong enough to inhibit both electron thermal conduction and the escape of alpha-particles in the radial direction. Analytical and numerical calculations indicate that the DT can be heated to 200-500 eV with 5-10 kJ of green laser light, which could be provided by the Z-Beamlet laser. The magneto-Rayleigh-Taylor (MRT) instability poses the greatest threat to this approach to fusion. Two-dimensional Lasnex simulations indicate that the liner walls must have a substantial initial thickness (10-20% of the radius) so that they maintain integrity throughout the implosion. The Z and Z-Beamlet experiments are now being planned to test the various components of this concept, e.g., the laser heating of the fuel and the robustness of liner implosions to the MRT instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Electron–Phonon Interaction on the Conductivity and Work Function of Epitaxial Graphene

In the context of the cluster model of epitaxial graphene, the condition for a stepwise change in the charge of carbon atoms under the action of graphene–substrate electron–phonon interaction and an external electric field is derived. Such charge transfer brings about corresponding steps of the static conductivity and work function of epitaxial graphene. Numerical estimates for the case of weak coupling of quasi-free graphene with metal and semiconductor substrates are given.

36 MATERIALS SCIENCE↗

On the space-charge boundary layer inside the nozzle of a cutting torch

A numerical study of the space-charge sheath adjacent to the nozzle wall of a cutting torch is presented. The hydrodynamic model corresponds to a collision-dominated sheath and does not assume cold ions, so drift-diffusion-type equations are used. Also an improved expression for the ion-neutral momentum transfer is employed rather than the usual constant ion-mean-free-path or constant ion collision frequency approximations. Assuming a constant electron temperature in the sheath and neglecting the electron inertial term, the continuity and momentum equations for ions and electrons, together with Poisson's equation, were solved for the electric potential, ion velocities (both normal and tangential components), and for the ion and electron densities. It was found that both the ion and electron densities present a sudden drop at the sheath-plasma edge. The ion density continues to decrease slowly inside the sheath, while the electron density presents a virtually zero value everywhere inside the sheath, the electron thermal conduction flux to the nozzle wall being negligible. These wall results thus become thermally isolated in spite of the high electron temperature in its adjacency. For a nozzle biasing voltage close to the gas breakdown, it was found that the electric field value is high, reaching a value of about 9x10{sup 6} V m{sup -1} at the exit of the nozzle wall. This value is higher than the average field value across the sheath and is on the order of the breakdown threshold value. This means that an undesired sheath breakdown could occur at the vicinities of the nozzle exit even if the average electric field across the sheath is not strong enough.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fundamentals of femtosecond laser ablation of dielectric materials

The modeling of laser-excited dielectric materials requires a detailed description of the electronic excitation. Dielectric materials do not absorb visible light by traditional linear absorption, so the dynamical generation of conduction-band electrons strongly couples to the absorption. The generation of free electrons is initiated by strong-field excitation and followed by multiplication through impact ionization by energetic electrons heated by the laser. The present paper describes an approach to solving the coupled problem of electron excitation and one-dimensional light propagation. The electronic excitation is described in the so-called multiple-rate-equation model, and the light is absorbed by a combination of strong-field excitation and linear absorption by the excited electrons, which are assumed to behave as a free-electron gas described by a Drude model. The model is generic and based on a few key parameters: the wavelength and the pulse duration of the light, and the band gap of the dielectric medium. This allows parametric investigations of ablation phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid architecture for shallow accumulation mode AlGaAs/GaAs heterostructures with epitaxial gates

Accumulation mode devices with epitaxially grown gates have excellent electrical stability due to the absence of dopant impurities and surface states. We overcome typical fabrication issues associated with epitaxially gated structures (e.g., gate leakage and high contact resistance) by using separate gates to control the electron densities in the Ohmic and Hall bar regions. This hybrid gate architecture opens up a way to make ultrastable nanoscale devices where the separation between the surface gates and the 2D electron gas is small. In this work, we demonstrate that the hybrid devices made from the same wafer have reproducible electrical characteristics, with identical mobility and density traces over a large range of 2D densities. In addition, thermal cycling does not influence the measured electrical characteristics. As a demonstration of concept, we have fabricated a hybrid single-electron transistor on a shallow (50 nm) AlGaAs/GaAs heterostructure that shows clear Coulomb blockade oscillations in the low temperature conductance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

TU-H-BRC-06: Temperature Simulation of Tungsten and W25Re Targets to Deliver High Dose Rate 10 MV Photons

Purpose: To study the impact of electron beam size, target thickness, and target temperature on the ability of the flattening filter-free mode (FFF) treatment head to deliver high-dose-rate irradiations. Methods: The dose distribution and transient temperature of the X-ray target under 10 MeV electron beam with pulse length of 5 microseconds, and repetition rate of 1000 Hz was studied. A MCNP model was built to calculate the percentage depth dose (PPD) distribution in a water phantom at a distance of 100 cm. ANSYS software was used to run heat transfer simulations. The PPD and temperature for both tungsten and W25Re targets for different electron beam sizes (FHWM 0.2, 0.5, 1 and 2 mm) and target thickness (0.2 to 2 mm) were studied. Results: Decreasing the target thickness from 1 mm to 0.5 mm, caused a surface dose increase about 10 percent. For both target materials, the peak temperature was about 1.6 times higher for 0.5 mm electron beam compared to the 1 mm beam after reaching their equilibrium. For increasing target thicknesses, the temperature rise caused by the first pulse is similar for all thicknesses, however the temperature difference for subsequent pulses becomes larger until a constant ratio is reached. The target peak temperature after reaching equilibrium can be calculated by adding the steady state temperature and the amplitude of the temperature oscillation. Conclusion: This work indicates the potential to obtain high dose rate irradiation by selecting target material, geometry and electron beam parameters. W25Re may not outperformed tungsten when the target is thick due to its relatively low thermal conductivity. The electron beam size only affects the target temperature but not the PPD. Thin target is preferred to obtain high dose rate and low target temperature, however, the resulting high surface dose is a major concern. NIH funding:R21 EB015957-01; DOD funding:W81XWH-13-1-0165 BL, PM, PB, and RF are founders of TibaRay, Inc. BL is also a borad member. BL and PM have received research grants from Varian Medical System, Inc. and RaySearch Laboratory. RF is an employee of Siemens Healthcare GmbH.

60 APPLIED LIFE SCIENCES↗

A Broad Stability Investigation of Nb-Doped SrCoO 2.5+δ as a Reversible Oxygen Electrode for Intermediate-Temperature Solid Oxide Fuel Cells

The present work reports a systematic study on the structural, thermal, electrical and electrochemical stability of SrCo 1–x Nb x O 2.5+δ series as a potential reversible oxygen-electrode for intermediate-temperature solid oxide fuel cells. The identified best composition is x = 0.10, which exhibits a stable pseudo primitive cubic structure at <700°C and a reversible oxygen redox reaction at 350°C. The conductivity of this material is p-type and also exhibits a peak at 350°C, implying that the electron hole conduction is closely associated with the oxygen nonstoichiometry. Electrochemical impedance spectroscopy analysis indicates a low polarization resistance rate-limited by a slower surface O 2 dissociation step. Altogether, the material is thermally stable and oxygen redox reversible below 700°C, above which a catalytically less active brownmillerite SrCoO 2.5 is formed.

25 ENERGY STORAGE↗

Effects of interhemisphere transport on plasma temperatures at low latitudes.

The thermal balance of the equatorial plasma between 300 and 800 km is examined. Steady state nighttime calculations are made for O+, H+, and electrons. The following features are included: collisional heat transfer between ions, electrons, and neutrals; ion and electron thermal conduction along the field lines; curvature of the field lines; nonlinear advection due to field-aligned ion and electron motions; and convective compression or expansion due to field-aligned and E x B motions. The ion velocities necessary to calculate the effects of convection are obtained from the work of Moffett and Hanson, who include a meridional wind across the magnetic equator in their calculations. It is shown that field-aligned interhemisphere plasma flows appreciably affect the plasma temperatures.

Bailey, G. J.↗

Electrical and thermal transport through low densified copper doped PbSe for thermoelectric application

In this paper, Cu doped PbSe is successfully synthesized by solid state reaction. Theinfluence of porosity on thermal and electrical transport in Cu doped PbSe is investigated in this study. Low densified material significantly scatters the electrons as well as phonons through the high number of scattering sites (like pores, cracks, disorder, etc). As a result, the drastic reduction in thermal conductivity and electrical conductivity isnoticed. Additionally, Seebeck coefficient enhances in a low densified materials. Furthermore, Pb{sub 1-x}Cu{sub x}Se (x ∼ 0 to 0.06) has high Seebeck coefficient due to the energy filtering effect and lower charge carrier concentration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dry Printing Pure Copper with High Conductivity and Adhesion for Flexible Electronics

Additive manufacturing of functional devices on various rigid and flexible substrates is rising rapidly due to their design flexibility, rapid manufacturing, and lower cost. Current printing technologies are ink-based and focused on printing silver (Ag) as conductive lines due to its matured ink formulation process, low sintering temperature, ease of printing, and low oxidation rate. However, Ag is the 68th most abundant element on Earth, while copper (Cu) is the 25th, making it much cheaper (>100×) while having a comparable conductivity to Ag. Therefore, printing Cu has become technologically and economically more attractive than Ag. Nevertheless, Cu printing is still a significant challenge in ink-based printing methods due to the higher sintering temperature relative to the glass-transition temperature of most flexible substrates, the higher oxidation rate, the challenging ink formulation process, and ink stability concerns. Here, we demonstrate printing highly conductive Cu on flexible polyimide substrates using a dry printing technique. Cu nanoparticles (~3–30 nm) are generated by on-demand laser ablation of a solid Cu target inside the printer head and under argon background gas. These Cu nanoparticles are then transported through a nozzle and onto the substrate, where they are laser-sintered in real time. The argon gas plays three critical roles in laser plume condensation for nanoparticle generation, transport, and sheath gas to avoid oxidation during sintering. The sintered nanoparticles thus show high electrical conductivity and mechanical stability under static and cyclic tests. Our dry printing technique can potentially revolutionize how electronic devices and sensors are additively manufactured for earth and space applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doping Effect of Fe Ions on the Structural, Electrical, and Magnetic Properties of SrTiO{sub 3} Nanoceramic Matrix

In the present investigation, strontium titanate nanoceramic was synthesized by incorporating iron (Fe) ion with general formula SrTi{sub 1−x}Fe{sub x}O{sub 3} (x = 0.0, 0.1, 0.2, and 0.4) using sol-gel autocombustion method. The effect of Fe ions on the structural, morphological, electrical, dielectric, and magnetic properties of the prepared matrix has been investigated by various characterization techniques with the appropriate formulation. The structural properties such as phase space, crystallite size (D), and lattice parameter (a) of prepared matrix are calculated by X-ray diffraction (XRD) technique. The functional groups were analyzed by Fourier transform infrared spectroscopy (FT-IR). The surface morphology of the prepared nanoceramic matrix has been determined by using field emission scanning electron microscopy (FE-SEM) analysis. Calculation of average particle size and diffraction patterns was confirmed by using images from transmission electron microscopy (TEM) and selected area electron diffraction pattern (SAED), respectively. An energy dispersive spectrum analysis (EDS) confirmed the compositional stoichiometry in the investigated matrix. Electrical conductivity increased the prepared sample due to the increasing in the Fe concentration and temperature. The dielectric parameters in the frequency range of 30 Hz to 1 MHz were found higher at lower frequencies. The pure SrTiO{sub 3} matrix shows a paramagnetic nature at room temperature, but for a higher concentration of Fe doping was used to observe the weak ferromagnetic nature. Therefore, due to Fe ion concentration, the properties of the prepared matrix have been completely varied and enhancement in the magnetic properties was observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electron spin resonance of Zn{sub 1-x}Mg{sub x}O thin films grown by plasma-assisted molecular beam epitaxy

Zn{sub 1-x}Mg{sub x}O thin films with a Mg content x between 0 and 0.42 grown by plasma-assisted molecular beam epitaxy on c-plane sapphire substrates were investigated by electron spin resonance at 5 K. Above band gap illumination induces a persistent resonance signal, which is attributed to free conduction band electrons. The g-factors of the Zn{sub 1-x}Mg{sub x}O epitaxial layers and their anisotropy were determined experimentally and an increase from g{sub ||}=1.957 for x=0 to g{sub ||}=1.970 for x=0.42 was found, accompanied by a decrease in anisotropy. A comparison with g-factors of the Al{sub x}Ga{sub 1-x}N system is also given.

36 MATERIALS SCIENCE↗

Dielectric properties of poly(vinylidene fluoride) nanocomposites filled with surface coated BaTiO{sub 3} by SnO{sub 2} nanodots

SnO{sub 2} nanoparticles with an average diameter of about 4 nm were coated on the surface of BaTiO{sub 3} (BT) (∼100 nm) by chemical treatment. With the introduction of BT@SnO{sub 2}, the dielectric permittivity of poly(vinylidene fluoride) (PVDF) composite was significantly increased to 90 at 10{sup 3} Hz, which is ∼40% higher than that of the BT/PVDF composites. It was attributed to the enhanced interfacial polarization in the interlayers between BT and PVDF due to the addition of SnO{sub 2} nanodots. The distance of SnO{sub 2} nanodots on the adjacent BT surfaces is close enough for the electron transport in the matrix by tunneling effect. Besides, the semiconductive SnO{sub 2} leads to the weak insulating-conducting transition close to the percolation threshold.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metallic to hopping conduction transition in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching device

In this Letter, a comprehensive analysis of how the metallic behavior transition to hopping was presented by studying the transport mechanisms of low resistance states (LRS) in Ta{sub 2}O{sub 5−x}/TaO{sub y} resistive switching devices at very low temperatures. Three types of conduction behaviors were reported through temperature-dependent measurements ranging from 5 K to 250 K. Memory cells at low LRS show metallic behavior due to the formation of metallic filament. The temperature dependence of resistance at medium LRS exhibits an interesting phenomenon that a positive temperature coefficient transfers into a negative one at temperature of 20 K. Detailed analysis reveals that this phenomenon is caused by the coexistence of extended and localized states, with metallic conduction at higher temperatures and variable-range hopping at lower temperatures. Carrier transport at high LRS is dominated by electrons hopping conduction with nearest-neighboring hopping conduction changing into variable-range hopping as temperature decreases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical and vibrational properties of (ZnO){sub k} In{sub 2}O{sub 3} natural superlattice nanostructures

A thermodynamically stable series of superlattices, (ZnO){sub k}In{sub 2}O{sub 3}, form in the ZnO-In{sub 2}O{sub 3} binary oxide system for InO{sub 1.5} concentrations from about 13 up to about 33 mole percent (m/o). These natural superlattices, which consist of a periodic stacking of single, two-dimensional sheets of InO{sub 6} octahedra, are found to give rise to systematic changes in the optical and vibrational properties of the superlattices. Low-frequency Raman scattering provides the evidence for the activation of acoustic phonons due to the folding of Brillouin zone. New vibrational modes at 520 and 620 cm{sup −1}, not present in either ZnO or In{sub 2}O{sub 3}, become Raman active. These new modes are attributed to collective plasmon oscillations localized at the two-dimensional InO{sub 1.5} sheets. Infrared reflectivity experiments, and simulations taking into account a negative dielectric susceptibility due to electron carriers in ZnO and interface modes of the dielectric layer of InO{sub 2}, explain the occurrence of these new modes. We postulate that a localized electron gas forms at the ZnO/InO{sub 2} interface due to the electron band alignment and polarization effects. All our observations suggest that there are quantum contributions to the thermal and electrical conductivity in these natural superlattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron heat flux and propagating fronts in plasma thermal quench via ambipolar transport

The thermal collapse of a nearly collisionless plasma interacting with a cooling spot, in which the electron parallel heat flux plays an essential role, is both theoretically and numerically investigated. Here, we show that such thermal collapse, which is known as thermal quench in tokamaks, comes about in the form of propagating fronts, originating from the cooling spot, along magnetic field lines. The slow fronts, propagating with local ion sound speed, limit the aggressive cooling of plasma, which is accompanied by a plasma cooling flow toward the cooling spot. The extraordinary physics underlying such a cooling flow is that the fundamental constraint of ambipolar transport along the field line limits the spatial gradient of electron thermal conduction flux to the much weaker convective scaling, as opposed to the free-streaming scaling, so that a large electron temperature and, hence, pressure gradient can be sustained. The last ion front for a radiative cooling spot is a shock front where cold but flowing ions meet hot ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗