Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrolyte”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Chemical Bond Covalency in Superionic Halide Solid‐State Electrolytes

Abstract Halide solid‐state electrolytes (SSEs) are promising superionic conductors with high oxidative stability and ionic conductivity, making them attractive for all‐solid‐state lithium‐ion batteries. However, most studies have focused on ion‐stacking structures, overlooking the role of bond characteristics in ionic transport. Here, we investigate bond dynamics and the superionic transition (SIT) in bromide electrolyte, Li 3 InBr 6 , using synchrotron X‐ray techniques and ab initio molecular dynamics (AIMD) simulations. We demonstrate that the SIT in halide SSEs is driven by a thermally induced transition in bonding character (ionic to covalent) rather than a change in crystal phase. AIMD simulations further reveal enhanced Li⁺ diffusion and collective anion motion at elevated temperatures. Expanding our study to Li 3 LnBr 6 (Ln = Gd, Tb, Ho, Tm, and Lu), we confirm the widespread occurrence of SIT in this material class, with Li 3 GdBr 6 exhibiting the highest ionic conductivity (5.2 mS cm −1 at 298 K). More importantly, the ionic‐covalent transition is highly tunable through electrolyte modifications, such as cation/anion substitution and synthesis methods. Our findings provide a new perspective on ionic transport, highlighting the critical role of chemical bond characteristics in halide SSEs.

Chemistry↗

Concentration‐dependent Cycling of Phenothiazine‐based Electrolytes in Nonaqueous Redox Flow Cells

Increasing redox-active species concentrations can improve viability for organic redox flow batteries by enabling higher energy densities, but the required concentrated solutions can become viscous and less conductive, leading to inefficient electrochemical cycling and low material utilization at higher current densities. To better understand these tradeoffs in a model system, we study a highly soluble and stable redox-active couple, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), and its bis(trifluoromethanesulfonyl)imide radical cation salt (MEEPT-TFSI). We measure the physicochemical properties of electrolytes containing 0.2–1 M active species and connect these to symmetric cell cycling behavior, achieving robust cycling performance. Specifically, for a 1 M electrolyte concentration, we demonstrate 94% materials utilization, 89% capacity retention, and 99.8% average coulombic efficiency over 435 h (100 full cycles). This demonstration helps to establish potential for high-performing, concentrated nonaqueous electrolytes and highlights possible failure modes in such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambipolar Electrochemistry of Pre‐Intercalated Ti 3 C 2 T x MXene in Ionic Liquid Electrolyte

Abstract Cation intercalation with or without redox remains the dominant charge storage mechanism for two‐dimensional (2D) Ti 3 C 2 T x MXene. Anion‐based charge storage remains unexplored due to intrinsic negative surface charge of MXenes preventing spontaneous intercalation of anions and irreversible oxidation of Ti at anodic potentials in aqueous electrolytes. In this work, we report on the ambipolar electrochemical behavior of the Ti 3 C 2 T x in ionic liquid electrolyte over a 2.5 V electrochemically stable window. The experiments are conducted on a thin Ti 3 C 2 T x film current collector coated with an electroactive layer of small flakes (∼150 nm) of Ti 3 C 2 T x pre‐intercalated with 1‐ethyl‐3‐methylimidazolium bis‐(trifluoromethylsulfonyl)‐imide (EMIM‐TFSI) ionic liquid. Couples of redox peaks with a very small potential separation during the voltage sweep are observed at high negative (−0.75 V vs. Ag wire) and high positive (+0.75 V vs. Ag wire) potentials. Our experimental electrochemical data combined with density functional theory (DFT) calculations suggest feasibility of pseudo‐intercalation of TFSI anions between Ti 3 C 2 T x flakes. This study provides a pathway for elucidating anion intercalation for different MXene chemistries in solvent‐free electrolytes, which can lead to development of MXene based energy storage devices with improved performance.

Electrochemistry↗

Decoupling Proton and Cation Contributions to Capacitive Charge Storage in Birnessite in Aqueous Electrolytes

Abstract Nanostructured birnessite is of interest as an electrode material for aqueous high power electrochemical energy storage as well as desalination devices. In neutral pH aqueous electrolytes, birnessite exhibits a capacitive response attributed to the adsorption of cations and protons at the outer surface and within the hydrated interlayer. Here, we utilize the understanding of proton‐coupled electron transfer (PCET) in buffered electrolytes to decouple the role of protons and cations in the capacitive charge storage mechanism of birnessite at neutral pH. We find that without buffer, birnessite exhibits primarily potential‐independent (capacitive) behavior with excellent cycling stability. Upon the addition of buffer, the capacity initially increases and the cyclic voltammograms become more potential‐dependent, features attributed to the presence of PCET with the birnessite. However, long‐term cycling in the buffered electrolyte leads to significant capacity fade and dissolution, which is corroborated through ex situ characterization. ReaxFF atomistic scale simulations support the observations that proton adsorption leads to birnessite degradation and that capacitive charge storage in birnessite is primarily attributed to cation adsorption at the outer surface and within the interlayer.

Saeed, Saeed↗

Chemical and Electrochemical Characterization of Hot–Pressed Li 6 PS 5 Cl Solid State Electrolyte: Operating Pressure–Invariant High Ionic Conductivity

Sulfide solid state electrolytes (SSE) are among the most promising materials in the effort to replace liquid electrolytes, largely due to their comparable ionic conductivities. Among the sulfide SSEs, Argyrodites (Li 6 PS 5 X, X=Cl, Br, I) further stand out due to their high theoretical ionic conductivity (~1×10 –2 S cm –1 ) and interfacial stability against reactive metal anodes such as lithium. Generally, solid state electrolyte pellets are pressed from powder feedstock at room temperature, however, pellets fabricated by cold pressing consistently result in low bulk density and high porosity, facilitating interfacial degradation reactions and allowing dendrites to propagate through the pores and grain boundaries. Here, we demonstrate the mechanical and electrochemical implications of hot-pressing standalone LPSCl SSE pellets with near-theoretical ionic conductivity, superior cycling performance, and enhanced mechanical stability. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and x-ray diffraction spectroscopy (XRD) analysis reveal no chemical changes to the Argyrodite surface after hot pressing up to 250°C. Furthermore, we use electrochemical impedance spectroscopy (EIS) to understand mechanical stability of Argyrodite SSE pellets as a function of externally applied pressure, demonstrating for the first time pressed standalone Argyrodite pellets with near-theoretical conductivities at external pressures below 14 MPa.

25 ENERGY STORAGE↗

Accessing a high‐voltage nonaqueous hybrid flow battery with a sodium‐methylphenothiazine chemistry and a sodium‐ion solid electrolyte

Abstract The development of redox flow batteries (RFBs) with nonaqueous electrolytes offers the possibility of accessing a high cell‐operation voltage (no restrain of hydrogen evolution and oxygen evolution potentials) and a low operation temperature (can be operated below the freezing point of water). Therefore, nonaqueous RFBs have recently garnered increasing attention. However, the cross‐mixing of liquid electrode/electrolyte materials has been plaguing the progress of the nonaqueous RFBs. Herein, we present a crossover‐free, high voltage nonaqueous hybrid flow battery (HFB) with a novel sodium‐methylphenothiazine (MPT) chemistry and a single‐ion solid‐electrolyte separator. The Na‐MPT redox couple delivers a high voltage of ~2.6 V when the cell was operated at a medium current density. A NASICON‐type solid electrolyte membrane (Na 3 Zr 2 Si 2 PO 12 ) could circumvent the crossover of the liquids between the positive and negative electrodes, and meanwhile could maintain a single‐ion (Na + ‐ion) conduction between the two electrodes to sustain the electrochemical reactions. Under such an electrochemical mechanism, the nonaqueous Na‐MPT HFB shows remarkable cycling performance.

Yu, Xingwen↗

Electrochemistry of Thin Films with In Situ/Operando Grazing Incidence X-Ray Scattering: Bypassing Electrolyte Scattering for High Fidelity Time Resolved Studies

Electroactive polymer thin films undergo repeated reversible structural change during operation in electrochemical applications. While synchrotron X-ray scattering is powerful for the characterization of stand-alone and ex situ organic thin films, in situ/operando structural characterization has been underutilized-in large part due to complications arising from supporting electrolyte scattering. This has greatly hampered the development of application relevant structure property relationships. Therefore, a new methodology for in situ/operando X-ray characterization that separates the incident and scattered X-ray beam path from the electrolyte is developed. As a proof of concept, the operando structural characterization of weakly-scattering, organic mixed conducting thin films in an aqueous electrolyte environment is demonstrated, accessing previously unexplored changes in the $\pi-\pi$ peak and diffuse scatter, while capturing the solvent swollen thin film structure which is inaccessible in previous ex situ studies. These in situ/operando measurements improve the sensitivity to structural changes, capturing minute changes not possible ex situ, and have multimodal potential such as combined Raman measurements that also serve to validate the true in situ/operando conditions of the cell. Finally, new directions enabled by this in situ/operando cell design are examined and state of the art measurements are compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self‐Templated 3D Sulfide‐Based Solid Composite Electrolyte for Solid‐State Sodium Metal Batteries

Abstract Rechargeable solid‐state sodium metal batteries (SSMBs) experience growing attention owing to the increased energy density (vs Na‐ion batteries) and cost‐effective materials. Inorganic sulfide‐based Na‐ion conductors also possess significant potential as promising solid electrolytes (SEs) in SSMBs. Nevertheless, due to the highly reactive Na metal, poor interface compatibility is the biggest obstacle for inorganic sulfide solid electrolytes such as Na 3 SbS 4 to achieve high performance in SSMBs. To address such electrochemical instability at the interface, new design of sulfide SE nanostructures and interface engineering are highly essential. In this work, a facile and straightforward approach is reported to prepare 3D sulfide‐based solid composite electrolytes (SCEs), which utilize porous Na 3 SbS 4 (NSS) as a self‐templated framework and fill with a phase transition polymer. The 3D structured SCEs display obviously improved interface stability toward Na metal than pristine sulfide. The assembled SSMBs (with TiS 2 or FeS 2 as cathodes) deliver outstanding electrochemical cycling performance. Moreover, the cycling of high‐voltage oxide cathode Na 0.67 Ni 0.33 Mn 0.67 O 2 (NNMO) is also demonstrated in SSMBs using 3D sulfide‐based SCEs. This study presents a novel design on the self‐templated nanostructure of SCEs, paving the way for the advancement of high‐energy sodium metal batteries.

Guo, Xiaolin↗

Design of an Online Electrochemical Mass Spectrometry System to Study Gas Evolution from Cells with Lean and Volatile Electrolytes

Gas evolution in high-energy Li-ion batteries remains a pervasive problem for a multitude of chemistries, jeopardizing the electrochemical performance and safety for consumers of electric vehicles. Many electrode–electrolyte degradation processes evolve gasses that may be detected in-situ with online electrochemical mass spectrometry (OEMS). In this work, details are provided for the setup and validation of an OEMS system that operates well under lean and volatile electrolyte conditions. Quite notably, the OEMS cells with only 40 µL of electrolyte and intermittent headspace sampling exhibit comparable electrochemical performance to flooded coin-cells. It is demonstrated that the onset time, shape, and magnitude of the gas evolution profiles calculated from mass spectrometer measurements match well to a known pressure reference through the use of an empirically determined fraction of removal. The off-gassing characteristics from a set of layered-oxide materials, NMC532, NMC811, and LNO, are used to further validate the OEMS setup against the literature. It is shown that many of the features present in the OEMS curves for equivalent systems from other groups are captured by this OEMS system. Finally, at an upper cut-off voltage of 4.4 V, LNO exhibits an intense release of CO 2 , O 2 , and CO gas relative to NMC532 and NMC811.

25 ENERGY STORAGE↗

Modeling the influence of the solid electrolyte interphase on the sand’s time and dendrite formation on lithium metal electrodes

Lithium metal is a sought after battery material for its high energy density due to the low electrochemical potential and density. However, lithium metal is also highly reactive, which results in a strong propensity for dendrite formation. The Sand’s time has previously been used to predict the time of dendrite initiation on metals that do not form a solid-electrolyte interphase (SEI), but it has been shown that the Sand’s time is not accurate for lithium electrodes when using transport parameters associated with the electrolyte. Thus, we built a numerical model to simulate lithium ion transport through a growing SEI to predict the Sand’s time. The numerical model is shown to be more accurate than previous analytical solutions, especially for low current densities. We then analyze the sensitivity of the Sand’s time to different SEI properties and the chemical potential gradients present in the SEI, driving lithium transport. The results showed that high lithium concentration has a greater impact at high current density, while fast diffusivity is more important at low current density. Lastly, we modeled the influence of surface roughness on the plating evolution and chemical potential gradients when an SEI is present in comparison to the electrolyte. As a result, we demonstrate that the SEI plays a critical role in lithium electrode stability, and that improved characterization techniques are needed to better understand transport through the SEI and increase lithium metal utilization in energy storage devices.

Chemistry↗

Ab initio calculations for crystalline PEO6:LiPF6 polymer electrolytes

Dry polymer electrolytes have been studied extensively because of their enhanced mechanical properties. Experimental studies have demonstrated that crystalline PEO6:LiPF6 has higher ionic conductivity than that of the amorphous phase, which seemingly contradicts the prevailing theory that amorphous polymer electrolytes have higher conduction performance. Also, the underlying mechanism at the atomic scale has remained elusive. In this work, the atomic and electronic structures of crystalline PEO6:LiPF6 are studied using ab initio density-functional theory. The results agree with experimental measurements. Additionally, the atomic-scale mechanisms of lithium ion transport in the polymer electrolytes are investigated with the climbing nudged elastic band method. The diffusion pathway and activation energy (∼0.87 eV) of lithium ions in crystalline PEO6:LiPF6 are determined.

Xue, Sha↗

Ion transport and association study of glyme-based electrolytes with lithium and sodium salts

Glyme solvents are a promising avenue of research in novel electrolytes, due to their thermal and chemical stability, large electrochemical window, and tunable properties. This work examines the transport properties of LiPF 6 and NaPF 6 salts in Monoglyme (G1), Diglyme (G2), and Tetraglyme (G4). Self-Diffusion coefficients, and degrees of ion association were found through spectroscopic techniques. Raman and Fourier-Transform Infrared (FTIR) spectroscopy exhibited an absorbance peak at 740 cm -1 , corresponding to the a 1g mode; known to signify the presence of solvent-separated and contact ion pairs. The increased intensity of this peak for G1 compared to G4 suggests that the electrolyte exhibits stronger association with decreasing solvent size. Nuclear Magnetic Resonance Diffusometry measurements yield self-diffusion coefficients for 7 Li, 23 Na, and 19 F across all samples to be on the order of 10 -9 m 2 s -1 in G1, to 10 -11 m 2 s -1 in G4. Comparison of conductivities calculated from the measured diffusivities and the Nernst-Einstein equation with conductivity measurements deduced from Electrochemical Impedance Spectroscopy (EIS) determined the ion association degree; the electrolytes were shown to exhibit stronger ion pairing with increased temperature which is attributed to a decrease in the dielectric constant of the solvents with increasing temperature. Plus, the ion association was shown to decrease with increasing solvent molecular size, consistent with FTIR findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning and high throughput experimental screening of eutectic electrolytes with co-solvents for redox flow batteries

Eutectic solvents, with high salt concentrations and suppressed volatility, are promising alternatives to aqueous and volatile organic electrolytes for grid-scale energy storage devices such as redox flow batteries (RFBs). However, it is not known a priori which hydrogen bond acceptors and donors would form a eutectic solvent and at which compositions of these mixtures would yield desirable properties for RFBs. Specifically, the known deep eutectic solvents generally have high viscosities and low ionic conductivities, especially in the landscape of RFB electrolytes. We report a high throughput experimental (HTE) study was carried out to assess the properties of eutectic solvents based on choline chloride as the hydrogen bond acceptor and ethylene glycol and aniline as the hydrogen bond donors. In addition, water, acetonitrile, and dimethyl sulfoxide as co-solvents were examined in terms of tuning the viscosity, conductivity, and solubility of two redox-active species: methyl viologen dichloride hydrate (MVCl 2 ·H 2 O, or MV for simplicity) and 2,1,3-benzothiadiazole (BTZ) that are relevant to RFBs. The HTE framework enabled the development of a rapid and comprehensive understanding of the design of new eutectic electrolytes incorporating co-solvents to improve the physicochemical and electrochemical properties for RFBs.

25 ENERGY STORAGE↗

Reversible function switching of Ag catalyst in Mg/S battery with chloride-containing electrolyte

Rechargeable Mg/S batteries suffer from fast capacity decay because of the difficult re-oxidation of MgS. To tackle this problem, we used Ag catalyst in Mg/S cells with Cl- containing electrolyte, and achieved a greatly improved specific capacity of ~1200 mAh•g -1 and a long cycling life of 100 cycles. To understand the mechanism behind this improvement, we employed in-situ synchrotron radiation X-ray diffraction and in-situ X-ray absorption spectroscopy tools to study the reversible phase transitions during charge/discharge cycling. Additionally, the in-situ experiment results revealed that, at deeply charged state, Ag reacted with Cl- in the electrolyte to form the AgCl interfacial layer which prevented the physical contact of Ag with elemental S and avoided the formation of Ag 2 S; at early discharged state, AgCl transformed back to metallic Ag, which guaranteed its catalytic effectiveness for MgS decomposition. This reversible function switching mechanism of Ag catalyst is completely different from that in Mg/S cells using other catalysts or electrolytes.

25 ENERGY STORAGE↗

Ionic Interdiffusion at Cathode|Solid-Electrolyte Interface: A Machine Learning–Assisted Multiscale Investigation and Mitigation Strategies

Future lithium batteries are expected to use solid electrolytes to achieve higher energy density and fast charge capabilities. However, most solid electrolytes are thermodynamically unstable against layered oxide cathodes. In this study, the stability of LiCoO2 (LCO) cathode with Li10GeP2S12 (LGPS) solid electrolyte is investigated using ab initio molecular dynamics (AIMD) and machine learning molecular dynamics (MLMD). The propensity of ionic interdiffusion, formation of a passivating interphase layer, and corresponding decay in cell performance is addressed using a continuum model. Large-scale MLMD simulations confirm that the LCO|LGPS interface permits interdiffusion of cobalt (Co) and other ionic species, leading to the formation and growth of a resistive interphase and to dramatic capacity fade even in the first cycle. We examine the literature evidence that incorporating a thin layer of LiNb0.5Ta0.5O3 (LNTO) between LCO and LGPS prevents the interdiffusion of ions. Atomistic simulations suggest that substituting lithium (Li) in LNTO with Co is thermodynamically unfavorable, thereby inhibiting ionic interdiffusion. The stable Nb5+/Ta5+ states form a rigid metal-oxide framework, which consequently also prevents the substitution of niobium (Nb) or tantalum (Ta). However, continuum-level analysis suggests that the higher mechanical stiffness of LNTO can lead to interfacial delamination between the LCO and LNTO. This phenomenon reduces the effectiveness of the protective layer. This paper, therefore, highlights the need to develop novel interlayers that balance low ionic interdiffusion with low mechanical stiffness.

Ncube, Musawenkosi K.↗

Grain-boundary fracture mechanisms in Li 7 La 3 Zr 2 O 12 (LLZO) solid electrolytes: When phase transformation acts as a temperature-dependent toughening mechanism

Garnet-type, solid electrolytes, such as Li 7 La 3 Zr 2 O 12 (LLZO), are a promising alternative to liquid electrolytes for lithium-metal batteries. However, such solid-electrolyte materials frequently exhibit undesirable lithium (Li) metal plating and fracture along grain boundaries. In this work, we employ atomistic simulations to investigate the mechanisms and key fracture properties associated with intergranular fracture along one such boundary. Our results show that, in the case of a Σ5 (310) grain boundary, this boundary exhibits brittle fracture behavior, i.e. the absence of dislocation activity ahead of the propagating crack tip, accompanied with a decrease in work of separation, peak stress, and maximum stress intensity factor as the temperature increases from 300 K to 1500 K. As the crack propagates, we predict two temperature-dependent Li clustering regimes. For temperatures at or below 900 K, Li tends to cluster in the bulk region away from the crack plane driven by a void-coalescence mechanism concomitant a simultaneous cubic-to-tetragonal phase transition. The tetragonalization of LLZO in this temperature regime acts as an emerging toughening mechanism. At higher temperatures, this phase transition mechanism is suppressed leading to a more uniform distribution of Li throughout the grain-boundary system and lower fracture properties as compared to lower temperatures.

36 MATERIALS SCIENCE↗

High-Energy-Density Solid-Electrolyte-Based Liquid Li-S and Li-Se Batteries

Lithium-sulfur (Li-S) and Lithium-selenium (Li-Se) batteries are considered as promising candidates for next-generation battery technologies, as they have high energy density and low cost. However, due to the use of a solid Li-metal anode and a liquid organic electrolyte, the current Li-S and Li-Se batteries face several issues in terms of Coulombic efficiency and cycling stability, which seriously impeded their development. Here, we report solid-electrolyte-based liquid Li-S and Li-Se (SELL-S and SELL-Se in short) batteries. The batteries use a Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) ceramic tube as electrolyte and work at temperatures higher than the melting point of Li; thus, polysulfide or polyselenide shuttle effects and Li dendrite growth are effectively prevented, and high energy density, together with high stability, fast charge/discharge capability, high Coulombic efficiency, and high energy efficiency, can be achieved. The SELL-S and SELL-Se batteries provide broader platforms for constructing high-energy, high-power, long-lifetime, and low-cost energy storage.

25 ENERGY STORAGE↗

Nuclear Magnetic Resonance Studies on Vanadium(IV) Electrolyte Solutions for Vanadium Redox Flow Battery

The vanadium (IV) electrolyte solutions with various vanadium concentrations are studied by variable temperature 1H and 17O Nuclear Magnetic Resonance (NMR) spectroscopy. The structure and kinetics of vanadium (IV) species in the electrolyte solutions are explored with respect to vanadium concentration and temperature. It was found that the vanadium (IV) species exist as hydrated vanadyl ion, i.e. [VO(H2O)5]2+ forming an octahedral coordination with vanadyl oxygen in the axial position and the remaining positions occupied by water molecules. This hydrated vanadyl ion structure is stable in vanadium concentrations up to 3M and in the temperature range of 240 to 340 K. The sulfate anions in the electrolyte solutions are found to be weekly bound to this hydrated vanadyl ion and occupies its second coordination sphere. The possible effects of these sulfate anions in proton and water exchange between vanadyl ion and solvent molecules are discussed based on 1H and 17O NMR results.

Environmental Molecular Sciences Laboratory↗